* Use initial transaction for settings swap transaction title params, and remove addition of swap properties to cancel transcations
* Update unit test data
* Use token symbol properties from initial transaction for filitering in transaction list
* Only shows the swaps intro popup on mainnet
* Remove code that closes swaps popup from e2e tests
* correct casing on isMainnet prop in home component
* Create wrapper function for segment events
* Extract transaction controller metrics calls into own function
Co-authored-by: Mark Stacey <markjstacey@gmail.com>
* Stop passing a gas param to the estimateGas call initiated in the swaps controller timedoutGasReturn
* Stop passing gas params to timedoutGasReturn
* Lint fix
* Stop passing no longer used param to setInitialGasEstimate
When the `chainId` for a custom RPC endpoint is edited, we now migrate
the corresponding address book entries to ensure they are not orphaned.
The address book entries are grouped by the `metamask.network` state,
which unfortunately was sometimes the `chainId`, and sometimes the
`networkId`. It was always the `networkId` for built-in Infura
networks, but for custom RPC endpoints it would be set to the user-set
`chainId` field, with a fallback to the `networkId` of the network.
A recent change will force users to enter valid `chainId`s on all
custom networks, which will be normalized to be hex-prefixed. As a
result, address book contacts will now be keyed by a different string.
The contact entries are now migrated when this edit takes place.
There are some edge cases where two separate entries share the same set
of contacts. For example, if two entries have the same `chainId`, or if
they had the same `networkId` and had no `chainId` set. When the
`chainId` is edited in such cases, the contacts are duplicated on both
networks. This is the best we can do, as we don't have any way to know
which network the contacts _should_ be on.
The `typed-message-manager` unit tests have also been updated as part
of this commit because the addition of `sinon.restore()` to the
preferences controller tests ended up clearing a test object in-between
individual tests in that file. The test object is now re-constructed
before each individual test.
* Remove network config store
* Remove inline networks variable in network controller
* Re-key network controller 'rpcTarget' to 'rpcUrl'
* Require chainId in lookupNetwork, implement eth_chainId
* Require chain ID in network form
* Add alert, migrations, and tests
* Add chainId validation to addToFrequentRpcList
* Update public config state selector to match new network controller
state
* Use network enums in networks-tab.constants
* Ensure chainId in provider config is current
* Update tests
JSON files are now sorted by key with `prettier`, using the plugin
`prettier-plugin-sort-json`. This does not affect `package.json`
because `prettier` uses a special parser for that file, as it has
a more restrictive format than JSON.
Instead of using `eslint-plugin-json` for linting JSON files,
`prettier` is now used. `prettier` is capable of detecting and
correcting more problems than `eslint-plugin-json` can, such as
indentation.
All JSON files have been run through `prettier`. The changes are all
superficial.
* Use verifyPassword instead of submitPassword when exporting priv key
Fixes#9287 which was when submitPassword is called will fully clear the keyring state
https://github.com/MetaMask/KeyringController/blob/master/index.js#L155ad823d0ac1/index.js (L562)ad823d0ac1/index.js (L726)
Also, pass hideWarning action prop so it will clear the appState.warning if a correct password is never provided on componentWillUnmount
* Hide Warning on componentWillUnmount
* Update exportAccount tests to verifyPassword
* Update ui/app/store/actions.js
Co-authored-by: Mark Stacey <markjstacey@gmail.com>
* Remove mountWithStore enzyme component wrapper in favor for renderWithProvider testing-library/react for tests
Change dropdown component tests to testing-library/react
* Add react-testing-library
Adds react-testing-library as a dependency, creates a wrapper function with Provider store/I18n context support, and implements it in unconnected-account-alert.
* Refactor renderWithProvider store to extra param, instead of component prop store
* Clear Account Details in AppState
We store sensitive information in the AppState under accountDetail for when the modal is active and present. This adds a new action/reducer and componentWillUnmount to clean up the persisted data left after leaving the modal.
* Remove reduntant clearAccountDetails call when clicking done button
* Fix require-unicode-regexp issues
See [`require-unicode-regexp`](https://eslint.org/docs/rules/require-unicode-regexp) for more information.
This change enables `require-unicode-regexp` and fixes the issues raised by the rule.
* Remove case-insensitive flag from regexps
This change fixes the `_validateERC20AssetParams` tests, ensuring that the given
options are all valid except those that are being tested. Previously the `symbol`
property was invalid _in addition to_ the `decimals` property.
This one gets a bit more complicated because the styles were interwoven and needed to be untangled to be moved. Essentially, though, the goal is to put the styles where they make the most sense and colocate them with their components.
This migration had referred to the non-existent
`TransactionsController` instead of `TransactionController`, so it
effectively did nothing. Now it should work.
This migration hasn't been included in any release yet, so we can fix
it in-place instead of adding an additional corrected migration.
The migration comment has also been updated, as it was inaccurate.
The remaining integration tests are all covered by e2e tests, so
they're no longer needed.
All associated scripts, fixtures, and dependencies have also been
removed.
This tests the `personal_sign` method using the test dapp. This test
reflects part of the `confirm-sig-requests` integration test, which
tests the confirmation of a `personal_sign` signature request.
A `data-testid` prop was added to the 'Sign' button on the signature
request confirmation page, to make it easier to select the 'Sign'
button reliably.
This updated test dapp has a new `personal_sign` button. It also fixes
the `Encrypt` button, which was broken in `v3.0.0`.
The `signature-request` e2e test needed to be updated to find the
'Sign' button by id rather than by text, since there are now two
buttons with the text 'Sign'.
The `withFixtures` helper function now has the option of starting the
test dapp as well. It will wait to ensure it has started up correctly,
and it'll shut it down when the test ends.
This test mirrors the `localization` integration test. It only tests
the display of fiat currency on the home page, and it only tests one
currency (`php`).
Both the primary and secondary balance components on `EthOverview` now
have `data-testid` props, so that they can be more easily referenced in
e2e tests.
This required the addition of a `data-testid` prop to the component
`UserPreferencedCurrencyDisplay`, which is passed through to the
underlying `CurrencyDisplay` component.
The e2e test helper function `withFixtures` now includes verbose
reporting on failure. Whenever a test fails, debugging information will
be saved to disk, just as with the other e2e test modules.
e2e test that use the `withFixtures` helper now check for console
errors after each successful test. If any errors are found, the test
fails.
It's currently enabled for Chrome only, because the Firefox driver
throws an error when you attempt to get the browser logs. Not sure why
exactly, but it's a long-standing problem.
The webdriver method `verboseReportOnFailure` had previously taken a
single parameter, `test`, which was an object representing the current
Mocha test. However, only one property was used (`title`).
Instead the `title` is now passed through directly. This was done to
make this function easier to use outside of a Mocha context.
It seems that this blocklist checker never worked correctly. Ever since
the initial commit, it was comparing the Number `1` to the `networkId`,
which is a string. Additionally, even if it did throw, the transaction
continued unhindered. The user could still approve it, and there was no
indication shown to the user that anything went wrong. Also some of the
blocklist entries were incorrectly mixed-case, and were never hit.
We can remove this for now, and re-add it later on after we rewrite the
transaction controller.
The `metamaskNetworkId` property in the `txMeta` for incoming
transactions was incorrectly set as a Number instead of a String. This
change was made accidentally as part of #8627.
As a result incoming transactions were being excluded from the
transaction list, as they didn't have a matching network ID.
`metamaskNetworkId` is now set to a string, and a migration has been
added to ensure `metamaskNetworkId` is converted to a string for any
incoming transactions in state.
The 'Expand view' button in the 'Account Options' menu was still being
shown on the fullscreen UI. This button is not useful in fullscreen, as
all it does is open the fullscreen UI. It is now hidden on the
fullscreen UI.
Imported accounts can be removed, but the permissions controller is not
informed when this happens. Permissions are now removed as part of the
account removal process.
Additionally, the `getPermittedIdentitiesForCurrentTab` selector now
filters out any non-existent accounts, in case a render occurs in the
middle of an account removal.
This was resulting in a render crash upon opening the popup on a site
that was connected to the removed account.
'Activity' is a better name for this tab because it contains more than
just transactions. Signature requests are also included, and more non-
transaction activity may be included in the future.
The `TokenRatesController` was accidentally broken in #8744, when the
logic for starting and stopping polling was moved from the `isActive`
property to start/stop functions.
A reference to the now-obsolete `isActive` property was accidentally
left behind, resulting in no exchange rate updates.
The entry for imported accounts in the account menu looked wrong with
the new connected site icon - there was no padding between the site
icon and the 'imported' label. The entry was pretty crowded with these
three symbols as well (the third being the 'x' used to remove the
account).
The site icon has been made the right-most icon, so that it lines up
with the site icons shown for other accounts, and spacing has been
added between the site icon and the 'imported' label.
The 'x' used to remove accounts has been removed. Accounts can still be
removed from the 'Account Options' menu on the Home screen. This seemed
like the wrong place for this button to exist, as it's the only action
that can be taken from that menu aside from navigation.
* refactor asset items to use list-item
Refactors the asset-list-item and token-cell to rely on the list-item
component for UI. Little changes were needed to the list-item code
to make this work! The result should be lots of eliminated code
Co-authored-by: Mark Stacey <markjstacey@gmail.com>
The "the transaction has the expected gas price" test was assuming the
fifth element with the `transaction-breakdown__value` class was the
element with the gas price. In practice that was sometimes not the
case, because some transaction detail fields would not be present, or
would appear after the first render.
The field is now looked up with a test id, ensuring it always finds the
correct field.
The e2e test for the "Hide token" functionality was incorrectly
clicking "Cancel" on the "Hide token" modal, thus not actually testing
that that token was hidden at all.
The "Confirm" button is now selected using a test id, to ensure the
wrong button isn't selected.
A new page has been created for viewing assets. This replaces the old
`selectedToken` state, which previously would augment the home page
to show token-specific information.
The new asset page shows the standard token overview as seen previously
on the home page, plus a history filtered to show just transactions
relevant to that token.
The actions that were available in the old token list menu have been
moved to a "Token Options" menu that mirrors the "Account Options"
menu.
The `selectedTokenAddress` state has been removed, as it is no longer
being used for anything.
`getMetaMetricState` has been renamed to `getBackgroundMetaMetricState`
because its sole purpose is extracting data from the background state
to send metrics from the background. It's not really a selector, but
it was convenient for it to use the same selectors the UI uses to
extract background data, so I left it there for now.
A new Redux store has been added to track state related to browser history.
The most recent "overview" page (i.e. the home page or the asset page) is
currently being tracked, so that actions taken from the asset page can return
the user back to the asset page when the action has finished.
The fullscreen UI now shows roughly the same design as the popup UI.
A few additional changes depicted in the new fullscreen designs will
be implemented in subsequent PRs (e.g. the inline buttons on assets)
This was done now to make asset pages easier to implement. Implementing
asset pages solely for the popup UI would have been complicated by the
fact that we use viewport size to switch between the two layouts, so we
would have had to re-route upon resizing the window.
The `AccountDetailsDropdown` component has been rewritten to use the
new `Menu` component, and to follow the latest designs.
This should be functionally equivalent. A couple of the icons have
changed, but that's about it.
Support for a subtitle was added to `MenuItem` to support the `origin`
subtitle used for the explorer link for custom RPC endpoints.
A few adjustments were required to `test/helper.js` to accommodate
the use of `Menu` from a JSDOM context (this is the first time it's
been used in a unit test). A `popover-content` element was added to the
fake DOM, and another global was added that `react-popper` used
internally.
An additional driver method (`clickPoint`) was added to the e2e driver
to allow clicking the background behind the menu to dismiss it. This
wasn't possible using the `clickElement` method, because that method
would refuse to click an obscured element. The only non-obscured
element to click was the menu backdrop, and that didn't work either
because the center was obscured by the menu (Selenium clicks the center
of whichever element is targeted).
The `TransactionViewBalance` component has been split into three
separate components. This was done primarily to make the asset page
easier to implement. Also the name `TransactionViewBalance` didn't
describe this component very well anymore.
Instead of the Ethereum and token-specific logic being in the same
component, the two cases were split into the `EthOverview` and
`TokenOverview` components respectively. They both use the
`WalletOverview` component, which has the structure shared by both
cases.
CSF = Storybook’s Component Story Format (CSF)
See https://storybook.js.org/docs/formats/component-story-format/
Note that the migrations still use CommonJS require, so the default export as
an object is quite ergonomic (& I don't want to touch the migrations).
What
- modify `ui/app/helpers/utils/transactions.util.js` and
`ui/lib/account-link.js` to strip trailing slashes
if they are present.
- added relevant tests not just for the new scenario,
but also the general scenarios for these functions,
as there previously was no test coverage for these
two functions.
Why
- Current behaviour, when user enters a block explorer URL
when configuring a custom RPC, and that block explorer URL
contains a trailing `/`.
- e.g. `https://block.explorer/`
- this results in a double-slash (`//`) in the transaction
and account URLs generated by MetaMask.
- e.g. `https://block.explorer/tx/0xabcd...`,
`https://block.explorer/account/0xabcd...`
- This needs to be handled using a router redirect
on the server of the block explorer,
and this changes would avoid that requirement.
All asset list items now use the same component (`AssetListItem`).
Previously the tokens and the Ethereum balance were totally separate
components, despite being styled similarly.
Various unnecessary DOM elements and style rules were removed, but the
overall list looks identical to how it looked before.
Add alert suggesting that the user switch to a connected account. This
alert is displayed when the popup is opened over an active tab that is
connected to some account, but not the current selected account. The
user can choose to switch to a connected account, or dismiss the alert.
This alert is only shown once per account switch. So if the user
repeatedly opens the popup on a dapp without switching accounts, it'll
only be shown the first time. The alert also won't be shown if the user
has just dismissed an "Unconnected account" alert on this same dapp
and account, as that would be redundant.
The alert has a "Don't show me this again" checkbox that allows the
user to disable the alert. It can be re-enabled again on the Alerts
settings page.
The unconnected account alert can now be disabled. A "don't show this
again" checkbox has been added to the alert, which prevents that alert
from being shown in the future.
An alert settings page has been added to the settings as well. This
page allows the user to disable or enable any alert.
This controller was not used. It was used by the
`ComputedBalancesController`, which was removed in #7057 (as it was
also unused).
The pending balances calculator was only used by the balances
controller.
A race condition exists where after adding an unapproved transaction,
it could be mutated and then replaced when the default gas parameters
are set. This happens because the transaction is added to state and
broadcast before the default gas parameters are set, because
calculating the default gas parameters to use takes some time.
Once they've been calculated, the false assumption was made that the
transaction hadn't changed.
The method responsible for setting the default gas now retrieves an
up-to-date copy of `txMeta`, and conditionally sets the defaults only
if they haven't yet been set.
This race condition was introduced in #2962, though that PR also added
a loading screen that avoided this issue by preventing the user from
interacting with the transaction until after the gas had been
estimated. Unfortunately this loading screen was not carried forward to
the new UI.
* Remove `estimatedGas` property from `txMeta`
The `estimatedGas` property was a cache of the gas value estimated for
a transaction when the default gas limit was set. This property wasn't
used anywhere. It may have been useful for debugging purposes, but the
same gas estimate is already stored on the `history` property so it
should be present in state logs regardless.
* Remove `gasLimitSpecified` txMeta property
The `gasLimitSpecified` property of `txMeta` wasn't used for anything.
It might have been useful for debugging purposes, but whether or not
the gas limit was specified can also be determined from looking at the
transaction history, so it's not a huge loss.
* Remove `gasPriceSpecified` txMeta property
The `gasPriceSpecified` property of `txMeta` wasn't used for anything.
It might have been useful for debugging purposes, but whether or not
the gas price was specified can also be determined from looking at the
transaction history, so it's not a huge loss.
* Remove `simpleSend` txMeta property
The `simpleSend` property of `txMeta` was used to ensure a buffer was
not added to the gas limit during gas estimation for simple send
transactions. It was made redundant by #8484, which accomplishes this
without the use of this property.
Previously a transaction would get assigned a default value during the
`addTxGasDefaults` function, after the transaction was added and sent
to the UI.
Instead the transaction is assigned a default value before it gets
added. This flow is simpler to follow, and it avoids the race condition
where the transaction is assigned a value from the UI before this
default is set. In that situation, the UI-assigned value would be
overridden, which is obviously not desired.
The test for receiving ETH from a contract had been clicking on the
first transaction list item, assuming it was pending. This is not
necessarily true; if the pending transaction hadn't yet been rendered,
this could select the first confirmed transaction instead.
The test has been updated to look for the first _pending_ transaction,
rather than just the first transaction.
Note that this likely does not fix the intermittent failure we've been
experiencing. The failure has been observed with this fix in place.
This test would occasionally fail due to a fluke of timing, where a
pending transaction would take slightly longer than expected to
be rendered in the "confirmed transactions" list. This `wait` block
ensures the test will try again until it has confirmed.
The test artifact directory for failed test "verbose reports" was
mistakenly being set to `[browser]/undefined`. This was broken during
the refactor in #7798, when the `driver` parameter was mistakenly left
in after the `verboseReportOnFailure` function was converted to a
method being called on `driver`.
An alert is now shown when the user switches from an account that is
connected to the active tab to an account that is not connected. The
alert prompts the user to dismiss the alert or connect the account
they're switching to.
The "loading" state is handled by disabling the buttons, and the error
state is handled by displaying a generic error message and disabling
the connect button.
The new reducer for this alert has been created with `createSlice` from
the Redux Toolkit. This utility is recommended by the Redux team, and
represents a new style of writing reducers that I hope we will use more
in the future (or at least something similar). `createSlice` constructs
a reducer, actions, and action creators automatically. The reducer is
constructed using their `createReducer` helper, which uses Immer to
allow directly mutating the state in the reducer but exposing these
changes as immutable.
`addToAddressBook` returned a thunk that didn't return a Promise,
despite doing async work. It now returns a Promise.
The callers of this action creator were updated to `await` the
completion of the operation. It was called just before redirecting the
user to a different page or closing a modal, and it seemed appropriate
to wait before doing those things.
The `getSelectedAddress` selector has a fallback of selecting the first
MetaMask account. This is not useful. The only time the
`selectedAddress` is not set is during onboarding, before any accounts
exist, so selecting the first account wouldn't be useful anyway.
Co-authored-by: Erik Marks <25517051+rekmarks@users.noreply.github.com>
`setRpcTarget` returned a thunk that didn't return a Promise, despite
doing async work. It now returns a Promise.
The callers of this action creator didn't need to be updated, as they
were all in event handlers that didn't require knowing when the
operation had completed.
Changes to the background state were being detected in the `update`
event handler in `ui/index.js` that receives state updates from the
background. However this doesn't catch every update; some state
changes are received by the UI in-between these `update` events.
The background `getState` function is callable directly from the UI,
and many action creators call it via `forceUpdateMetamaskState` to
update the `metamask` state immediately without waiting for the next
`update` event. These state updates skip this change detection in
`ui/index.js`.
For example, if a 3Box state restoration resulted in a `currentLocale`
change, and then a `forceUpdateMetamaskState` call completed before the
next `update `event was received, then `updateCurrentLocale` wouldn't
be called, and the `locale` store would not be updated correctly with
the localized messages for the new locale.
We now check for background state changes in the `updateMetamaskState`
action creator. All `metamask` state updates go through this function,
so we aren't missing any changes anymore.
`setProviderType` returned a thunk that didn't return a Promise,
despite doing async work. It now returns a Promise.
None of the callers of this action creator needed to know when it
completed, so no changes to the call sites were made.
A simple default store of `{ metamask: {} }` is now used for the
actions tests.
While I would prefer that any expectations about the store be included
in each test, the mere existence of this `metamask` object seems like
a fairly reasonable default, as it's (hopefully) impossible for it to
be unset at runtime.
The `2-state.json` test state file was deleted as well, as it was no
longer used.
Many of the "message manager" background methods return a full copy of
the background state in their response; presumably to save us from
making a full round-trip to update the UI `metamask` state after it
changes. However, the action creators responsible for calling these
methods were calling `updateMetamaskState` even when the background
method failed. In effect, they were setting the UI `metamask` state to
`undefined`.
They have been updated to only set the UI `metamask` state if the
background method succeeded.
`setSelectedAddress` returned a thunk that didn't return a Promise,
despite doing async work. It now returns a Promise.
This action creator was only called in two places, and neither benefit
from using the Promise now returned. They were both event handlers. In
both cases there was an existing Promise chain, but the only thing
after this set was a `catch` block that displayed any error
encountered. I decided not to return the result of `setSelectedAddress`
to this chain, because all it would do is set the warning a second
time in the event of failure.
`showAccountDetail` returned a thunk that didn't return a Promise,
despite doing async work. Now it returns a Promise.
This action is only called in one place, and it looks like the actions
dispatched alongside it were meant to be run in parallel, so no changes
were made there.
The `shift-list-item` component for displaying ShapeShift transactions
has been removed, along with three other components that were used
solely by that component (`copyButton`, `eth-balance`, and
`fiat-value`).
This component hasn't been used in some time, as ShapeShift
transactions no longer exist to display. The controller that ShapeShift
transactions originated from was removed in #8118, and it became
impossible to create new ShapeShift transactions from within MetaMask
in #6746
This state has been removed from the background. It was used for the
old UI, and has been unused for some time. A migration has been added
to delete this state as well.
The action creator responsible for updating this state has been removed
from the UI as well, along with the `callBackgroundThenUpdateNoSpinner`
convenience function, which was only used for this action.
The `transForward` app state is no longer used, so it has been removed.
Associated actions have been removed as well.
This state dates back a few years, so I was unable to determine when it
was made obsolete.
Keyrings are added either through the `getKeyringForDevice` background
method (as part of the hardware wallet connect flow), or via
`importAccountWithStrategy` (when importing an account). The
`addNewKeyring` action and corresponding background method has not been
used in a long time.
This state hasn't been used since #5886. The nonce we display in our UI
is now from the background, rather than queried directly from the
front-end.
This also means we save making this network call each time a pending
transaction is added, and each time the transaction list is mounted.
Some of the unit tests for `actions.js` were calling async actions
without `await`-ing them. All async actions are now called with `await`
to ensure they've completed.
`markPasswordForgotten` is an asynchronous function, but it was being
called synchronously. The page was redirected without waiting for the
operation to complete.
We now wait for the operation to complete before continuing. Failure is
still not being handled correctly, but that will be addressed in a
separate PR.
* Add popover for informing user about the connected status indicator
* Ensure user only sees connected status info popover once
* Default connectedStatusPopoverHasBeenShown to true and set it to false in a migration
* Add unit test for migration 42
* Initialize AppStateController if it does not exist in migration 42
* Update connect indicator popup locale text
* Code cleanup for connected-indicator-info-popup
* Code cleanup for connected-indicator-info-popup
This method adds the given account to the given origin's list of
exposed accounts. This method is not yet used, but it will be in
subsequent PRs (e.g. #8312)
This method has been added to the background API, and a wrapper action
creator has been written as well.
Now that identities are available synchronously in the permissions
controller, accounts can be validated synchronously as well. Any
account the user wants to give permissions to should already be tracked
as an identity in the preferences controller.
* Fix order of accounts in `eth_accounts` response
The accounts returned by `eth_accounts` were in a fixed order - the
order in which the keyring returned them - rather than ordered with the
selected account first. The accounts returned by the `accountsChanged`
event were ordered with the selected account first, but the same order
wasn't used for `eth_accounts`.
We needed to store additional state in order to determine the correct
account order correctly on all dapps. We had only been storing the
current selected account, but since we also need to determine the
primary account per dapp (i.e. the last "selected" account among the
accounts exposed to that dapp), that wasn't enough.
A `lastSelected` property has been added to each identity in the
preferences controller to keep track of the last selected time. This
property is set to the current time (in milliseconds) whenever a new
selection is made. The accounts returned with `accountsChanged` and by
`eth_accounts` are both ordered by this property.
The `updatePermittedAccounts` function was merged with the internal
methods for responding to account selection, to keep things simpler. It
wasn't called externally anyway, so it wasn't needed in the public API.
* Remove caveat update upon change in selected account
The order of accounts in the caveat isn't meaningful, so the caveat
doesn't need to be updated when the accounts get re-ordered.
* Emit event regardless of account order
Now that we're no longer relying upon the caveat for the account order,
we also have no way of knowing if a particular account selection
resulted in a change in order or not. The notification is now emitted
whenever an exposed account is selected - even if the order stayed the
same.
The inpage provider currently caches the account order, so it can be
relied upon to ignore these redundant events. We were already emiting
redundant `accountsChanged` events in some cases anyway.
Selecting a new account now results in all domains that can view this
change being notified. Previously only the dapp in the active tab was
being notified (though not correctly, as the `origin` was accidentally
set to the MetaMask chrome extension origin).
This handling of account selection has been moved into the background
to minimize the gap between account selection and the notification
being sent out. It's simpler for the UI to not be involved anyway.
Previously all browser globals were allowed to be used anywhere by
ESLint because we had set the `env` property to `browser` in the ESLint
config. This has made it easy to accidentally use browser globals
(e.g. #8338), so it has been removed. Instead we now have a short list
of allowed globals.
All browser globals are now accessed as properties on `window`.
Unfortunately this change resulted in a few different confusing unit
test errors, as some of our unit tests setup assumed that a particular
global would be used via `window` or `global`. In particular,
`window.fetch` didn't work correctly because it wasn't patched by the
AbortController polyfill (only `global.fetch` was being patched).
The `jsdom-global` package we were using complicated matters by setting
all of the JSDOM `window` properties directly on `global`, overwriting
the `AbortController` for example.
The `helpers.js` test setup module has been simplified somewhat by
removing `jsdom-global` and constructing the JSDOM instance manually.
The JSDOM window is set on `window`, and a few properties are set on
`global` as well as needed by various dependencies. `node-fetch` and
the AbortController polyfill/patch now work as expected as well,
though `fetch` is only available on `window` now.
The tests for the detect-tokens controller were nearly all broken. They
have been fixed, and a few improvements were made to controller itself
to help with this.
* The core `detectNewTokens` method has been updated to be async, so
that the caller can know when the operation had completed.
* The part of the function that used `Web3` to check the token balances
has been split into a separate function, so that that part could be
stubbed out in tests. Eventually we should test this using `ganache`
instead, but this was an easier first step.
* The internal `tokenAddresses` array is now initialized on
construction, rather than upon the first Preferences controller update.
The `detectNewTokens` function would have previously failed if it ran
prior to this initialization, so it was failing if called before any
preferences state changes.
Additionally, the `detectTokenBalance` function was removed, as it was
no longer used.
The tests have been updated to ensure they're actually testing the
behavior they purport to be testing. I've simulated a test failure with
each one to check that it'd fail when it should. The preferences
controller instance was updated to set addresses correctly as well.
The "global" action constants (the ones previously in `actions.js`)
have been moved to a separate module. This was necessary to avoid a
circular dependency in an upcoming change that was causing problems.
In general the "ducks" pattern of organizing Redux stores does result
in circular dependency problems. This is because reuse of actions
between reducers is encouraged, so it's not uncommon for two reducers
to want to reference an action from the other. Going forward we can
avoid this problem by moving action constants that are shared between
reducers into this shared module.
This action was never triggered in practice, as MetaMask is never
unlocked from the UI. The unlock always occurs as a result of a
background state update.
* Connect screen popup redesign
* Open permission request in notification instead of tab
* Remove no longer user locales
* Update permissions unit test mock to accout for change of opts passed to permissions controller
* Lint fix
* Inline broken line svg in permission-page-container-content.component.js for faster loading
* Add back button to second screen on connect flow
* Add xOfY locale and use for the page count in the connect flow
* Lint fix for svgs permission-page-container-content.component.js
* Fix rebase error
* Lint fix
* Clean up styles on the connect-screen-into-popup branch
* Use closeCurrentWindow to close window on cancel when in full screen connect flow
* Handle errors in rejectPermissionsRequest
* Full screen styles for connect flow
* Lint fixed in permissions-connect and actions.js
* Redirect screen now shows metamask icon instead of users identicon
* Fix subtitle spacing in permissions-connect-header'
* Use window.close instead of closeCurrentWindow() in cancelPermissionsRequest
* Use permissions-connect-header__subtitle in permissions-connect-header.component
* Add UI for selecting multiple accounts on the first permissions connect screen
* Make accounts list scrollable on connect screen
* Change title wording on connect screen to 'select your accounts'
* Add select all tooltip to info circle on top of connect screen account list
* Add security info footer to the first screen of the connect flow
* Apply redesigns to page 2 of connect flow
* Display number of accounts on connect flow second screen if there are multiple to connect
* Update e2e tests for connect screen multi-select changes
* Remove unused chooseAnAcount message
* Fix styling/display of redirect elements on second page of connect flow
* Assorted small fixes in permissions connect
* Remove unnecessary tiny delays in spec files
* Remove incorrect use of bem modified in choose-account
* Remove unused locale
* Use Set for managing selected accounts in choose-acount and permissions-connect componets
* Compone!
* Move connect flow header into a reusable component, and implement new header designs
* Update locales and add missing locales
* Improve permission list item design (second screen of connect flow)
* Check box component improvements
* Fixes in variables.scss
* Simplfy code in selectAll of choose-account.component
* Hide checkboxes on first pages on connect flow when there is only one account
* Allow autofill of default new account modal text with right arrow
* Disable next button on first screen of connect flow when no accounts selected
* Improve choose-account/index.scss
* Remove metamask secure graphic
* Fix connect flow redirect screen
* Fix connectToMultiple locale
* Remove locales no longer used after connect flow multiple connect updates
* Fix size of dapp icon on redirect screen of connect flow
* Clean up choose-account code
* Stop using placeholder in new-account-modal
* Remove unused styles in permission-page-container/index.scss
* Pass origin instead of site name to PermissionsConnectHeader in connect flow
* Make iconName a required prop in permissions-connect-header
* Show checkbox in cases where there is one account in the choose-account list
* Do not render select all checkbox when only 1 list item, instead of just hiding it
* Small cleanup in choose-account/index.scss
Two tabs have been created on the home screen: 'Assets' and 'History'.
This tabbed view is shown only on small screens (e.g. in the popup).
The fullscreen view is unchanged.
The toggle-able left sidebar no longer exists, so some 'sidebar-left'
specific code and styles have been removed. The button in the menu bar
has been removed as well.
The 'History' title of the transaction history is now redundant when
where are no pending transactions, so it as been conditionally hidden.
A passthrough for `data-testid` has been added to the Tab component for
convenience in e2e tests.
The 'Add Token' component has been redesigned to be more in-line with
the new home screen design. The description instructing the user to
click the 'Add Token' button has been removed, and the section itself
has been made roughly the same size as one of the list item. The text
now appears on just one line, overflowing to two if necessary.
The styles for the TokenCell component have been moved to be alongside
the component. They have also been renamed from `token-list-item` to
match the component name.
This commit updates the existing _Connected Sites_ section to a modal using
the `Popover` component. This will serve as a base for the new modal design.
The `network` prop was being passed to the Identicon despite that not
being an Identicon prop, and the `userAddress` prop was being passed
down by the container but was unused. The methods removed were not
called anywhere.
These two functions were not especially useful. `tOrDefault` was used
only by `tOrKey`, and `tOrKey` was only used in one place. All it did
was return the given `key` directly if it was falsey, so it was easily
replaced by a condition.
The `metamask.send.from` field was assumed by various selectors to be
an object, but instead it was recently set to a string. The selectors
have been updated to assume it's a string, and to fetch the full
account object explicitly.
The selector `getSendFromObject` was repurposed for this, as that's
basically what it already did. The optional address parameter was
removed though, as that was only used to fetch the `from` address in
cases where the `send` state was set without there being a `from`
address set. That case is no longer possible, as the `from` address is
always set upon the initialization of the `send` state.
The `getSendFromObject` selector no longer fetches the 'name' of that
address from the address book state either. This property was not used
in either of the cases this selector was used.
The "Transaction View" component has been merged with the Home
component. The division between these two components seemed wrong
because the "Transaction View" contained the menu bar (distinctly a
"home" thing, not a "transaction" thing), and we will be adding more
non-transaction-related components shortly.
This also let us use a single `Media` component instead of two.
The `tabId` of the message sender is now added to the middleware
request object. This step is omitted if the `tabId` is not provided.
This is done early in the middleware stack, so the `tabId` should be
available for any subsequent middleware to use.
The Onboarding Middleware has also been modified to get the `tabId`
from the request object, rather than expecting it as a parameter upon
creation.
This refactor will enable further uses of the `tabId`.
Implement `eth_decrypt` and `eth_getEncryptionPublicKey`. This allows decryption backed by the user's private key. The message decryption uses a confirmation flow similar to the messaging signing flow, where the message to be decrypted is also able to be decrypted inline for the user to read directly before confirming.
* Revert "Revert "Update Wyre ETH purchase url" (#7631)"
This reverts commit bc67d1eeca.
* Restrict widget to just debit card payments
Apple Pay apparently only works on Safari.
* Use @metamask/eslint-config@1.1.0
* Use eslint-plugin-mocha@6.2.2
* Mark root ESLint config as root
* Update Mocha ESLint rules with shared ESLint config
* Various component tests and some conditional statements
Conditional in account-menu in removeAccount when keyring sometimes is not initially provideed
Conditional on unlock-page when there is no target.getBoundingClientRect on the element.
* Update helpers
* Remove component debugging
* Add default params for render helpers
* Remove stubComponent for old Mascot
Changes in https://github.com/MetaMask/metamask-extension/pull/7893 has prevented the need to stub it out.
Change logout to lock in account-menu test
This was done to reduce the number of direct dependencies we have. It
should be functionally equivalent. The bundle size should not change,
as we use `clone` as a transitive dependency in a number of places.
Unhandled rejections are now caught using built-in Node.js APIs instead
of with `bluebird`. `bluebird` was added as a production dependency but
was only used for this purpose. The code responsible for catching
unhandled rejection in the browser was removed, as this test helper is
never run in the browser.
Additionally, unhandled rejections are tracked over the course of all
tests, and result in a non-zero exit code if they remain at the end.
This was done because it is possible for errors to trigger the
`uncaughtRejection` event but then still be handled later on. This is
uncommon, and doesn't seem to happen in our test suite. But if it does
in the future, it'll be logged but won't result in a non-zero exit
code.
* Add benchmark to CI
The page load benchmark for Chrome is now run during CI, and the
results are collected and summarized in the `metamaskbot` comment.
Closes#6881
* Double default number of samples
The number of default samples was changed from 10 to 20. The results
from 10 samples would show statistically significant changes in page
load times between builds, so weren't a sufficiently useful metric.
A margin of error metric has been added, which is calculated from a 95%
confidence interval. This confidence interval is calculated using
Student's t-distribution, which is generally preferred for smaller
sample sizes (< ~30) of populations following a normal distribution.
The script `benchmark.js` will collect page load metrics from the
extension, and print them to a file or the console. A method for
collecting metrics was added to the web driver to help with this.
This script will calculate the min, max, average, and standard
deviation for four metrics: 'firstPaint', 'domContentLoaded', 'load',
and 'domInteractive'. The variation between samples is sometimes high,
with the results varying between samples if only 3 were taken. However,
all tests I've done locally with 5 samples have produced results within
one standard deviation of each other. The default number of samples has
been set to 10, which should be more than enough to produce consistent
results.
The benchmark can be run with the npm script `benchmark:chrome` or
`benchmark:firefox`, e.g. `yarn benchmark:chrome`.
The 'can retype the seed phrase' test would fail sometimes when one of
the words in the seed phrase was a subset of another word (e.g. 'issue'
and 'tissue'). This is because the selector used to find the word
looked for the first element that contained the text, rather than an
exact match.
To simplify the selector and make it more reliable, test ids were added
to each seed phrase word. The selector now uses CSS instead of XPath,
and it only finds exact matches.
A test id was also added to the div containing the shuffled seed words
to select from, so that the chosen seed words wouldn't be selected
in place of the real target when the same word appears twice.
There have been intermittent test failures at the beginning of various
e2e test runs. Most tests start with waiting for the 'Welcome' button
to be visible and enabled, which means waiting for the loading screen
to go away.
It looks like the reason the test intermittently fails is that
sometimes the loading screen doesn't appear until a few moments _after_
the page loads (or that it vanishes and comes back).
It was rather difficult to track down each possible cause for the
loading screens, so in the meantime a pause has been added at the start
of each run. This should hopefully suffice to ensure the momentary gap
in loading has been passed by the time the first test starts up.
The `withFixtures` helper will instantiate ganache, a web driver, and
a fixture server initialized with the given set of fixtures. It is
meant to facilitating writing small, isolated e2e tests.
The first example test has been added: simple-send. It ensures that the
user can send 1 ETH to another account.
These new e2e tests will run during the normal e2e test run.
Closes#6548
The driver now has a page navigation function that can navigate to any
of the three primary pages used in the extension. Additional pages and
support of paths can be added later as needed.
As of #7663, an in-memory store was used in place of local storage
during e2e tests, to facilitate the use of state fixtures. However,
this made it difficult to export state during a test run. The
instructions for exporting state to create fixtures assumed that local
storage was being used.
A new global function has been added to the background context to allow
exporting state. This method is available during testing and
development, and it works with either local storage or the in-memory
store. The fixture instructions have been updated to reference this new
function.
The signature request e2e tests were previously using ropsten. This
expectation was even hard-coded into the test contract dapp.
Instead the contract-dapp has been updated to use the current `chainId`
when calling `signTypedData` (falling back to the `networkId` if
`chainId` is not set). The fixture used by `signature-request` has been
updated to use ganache.
The switch case has been moved to a separate function so that the
initialization steps following the web driver instantiation could more
easily be deduplicated.
The e2e tests were failing intermittently after removing an account
because the account was shown as not deleted after the removal. I
suspect this was because the account _had_ been removed, but that
change to the background state hadn't yet propagated to the UI.
The background state is now synced before the loading overlay for
removing the account is removed, ensuring that the removed account
cannot be seen in the UI after removal.
* Remove unused functions from `mapDispatchToProps`
The actions import was also updated to import only the two actions
used, rather than all actions.
* Remove unused container component
Well, technically it was the props injected by this container that were
unused. The container served no purpose, so the component it surrounded
is now used directly instead.
* Remove both unused `getCurrentViewContext` selectors
* Remove unused SHOW_CONFIG_PAGE action
* Remove checks for `currentView` with name `config`
Now that the SHOW_CONFIG_PAGE action has been removed, it's no longer
possible for `currentView.name` to be set to that value.
* Remove unused `wallet-view` container props
* Delete unused SHOW_SEND_PAGE and SHOW_ADD_TOKEN_PAGE actions
* Remove unused `account-menu.container` props
* Remove unused SHOW_INFO_PAGE action
* Remove unused SET_NEW_ACCOUNT_FORM action
* Wait until element is clickable before clicking in e2e tests
A new `findClickableElement` has been added to the webdriver to allow
finding an element and blocking until it's both visible and enabled.
This is now used by the pre-existing `clickElement` method as well.
All cases where something is clicked in the e2e tests have been
updated to use one of these methods, to ensure we don't run into
intermittent failures when loading screens take longer than usual.
These rows on the Advanced Settings page were being looked up in the
e2e tests by the order they appeared in. Instead they're now referenced
by data id, so that we can add new settings and re-arrange them without
breaking the e2e tests.
The transaction navigation in the e2e tests has been made simpler with
the addition of data attributes to help with finding the navigation
buttons. Each button is now labelled according to its purpose.
* Specify type before parameter name
Various JSDoc `@param` entries were specified as `name {type}` rather
than `{type} name`.
A couple of `@return` entries have been given types as well.
* Use JSDoc optional syntax rather than Closure syntax
* Use @returns rather than @return
* Use consistent built-in type capitalization
Primitive types are lower-case, and Object is upper-case.
* Separate param/return description with a dash
The Selenium webdriver is difficult to use, and easy to misuse. To help
use the driver and make it easier to maintain our e2e tests, all driver
interactions are now performed via a `driver` module. This is basically
a wrapper class around the `selenium-webdriver` that exposes only the
methods we want to use directly, along with all of our helper methods.
These tests were updated in #7473 to navigate in a different order,
because the transaction order changed. Unfortunately this meant that
a second contract deployment was being confirmed, where it was
previously being rejected.
This updates the test to ensure the same transaction is rejected and
confirmed as prior to the change in #7473
The account details close button is difficult to click from the e2e
tests because it has a size of zero. The actual icon is added via CSS
as an `::after` pseudo-element.
The CSS has been adjusted to give the icon a size, and it the markup
is now a `button` rather than a `div`.
* Make gas estimate update on debounced token amount change, not just on blur after change
* Updated tests
* Ensure `updateGas` is bound early
Co-authored-by: Mark Stacey <markjstacey@gmail.com>
Typically the fullscreen UI will open upon installation, though this
behaviour was suppressed in development. This was dealt with in the e2e
tests by waiting for it to open, then closing it.
Instead this behaviour is now suppressed for test builds as well.
* Improve `openNewPage` helper function
The two delays were removed, and the window handle for the new page is
now returned. This was made possible with the new `newWindow` function
added in `v4.0.0-alpha.3` of `selenium-webdriver`.
* Replace recursion with loops
This should result in far more pleasant stack traces for any
exceptions in these functions. It might also be faster. These functions
seem easier to understand as loops as well.
* Remove unused string parameter
The `closeAllWindowHandlesExcept` function has been simplified by
removing a branch that handles the case where the `exceptions`
parameter given is a string. That parameter is never a string.
Update `selenium-webdriver` to v4.0.0-alpha.5. Despite the fact that
this version has "alpha" in the name, the maintainer of
`selenium-webdriver` has described this release as stable [1].
A few APIs were removed or changed in v4, which required changes to our
Firefox webdriver.
The port used for webdriver communication can now be specified
manually. This was required to ensure the threebox tests kept working,
because they used two different driver instances. This new version of
`selenium-webdriver` now uses the same port for each instance of the
webdriver (unlike the old version, which generated a new port for each
one), so it was necessary to manually specify the port to prevent the
same port from being used for both instances.
`chromedriver` required an update, as the version we were using was not
compatible with the new W3C WebDriver protocol. I've updated
`geckodriver` as well, just to bring it in line with the version of
Firefox we are using.
[1]: https://github.com/SeleniumHQ/selenium/issues/5617#issuecomment-373446249
* Remove unused onboarding stream
* Pass `sender` through to `setupProviderEngine`
The Port `sender` has been passed down a few more layers. This allows
us to get more information from the sender deeper in the stack, but
also simplifies things a bit as well. For example, now the "fake"
URL object with the `metamask` hostname is no longer needed.
* Create onboarding middleware
This middleware intercepts `wallet_registerOnboarding` RPC messages. It
will register the sender as an oboarding initiator if possible, and
otherwise ignores the message.
* Add network store for testing
An alternative persistent state store has been created for use with e2e
tests. Instead of reading state from disk, it tries to load state from
a local fixture server running on port `12345` and serving state from
the path `/state.json`, and returns a blank state otherwise.
* Add e2e test fixture server
A fixture server has been added for serving background state, which the
background will read upon startup as part of restoring persisted state.
The `signature-request` e2e test has been updated to use a fixture to
bypass the registration step. The fixture used (`imported-account`) was
generated by pausing midway through that test run
* Add Get Accounts button
This button calls `eth_accounts`. This button is always enabled, even
when not connected.
* Disable account buttons by default
The buttons that require you to have first connected have been disabled
by default. Previously they would be enabled until the JavaScript
finished initializing the page, at which point they'd be disabled. This
resulted in a distracting flash as the page loaded and the buttons
changed.
The `signTypedData` button was added to the accounts button set as
well, rather than being left enabled regardless of connected status.
* Allow connect button to become re-enabled
The Connect button was broken previously in that after being disabled,
it would stay disabled even if the dapp lost access to MetaMask. The
button will now be enabled whenever not connected.
* Stringify signTypedData results
* Defer metamask onboarding bundle to speed up page load
The `ganache.js` helper module uses `ganache-core` to start `ganache`
instead of `ganache-cli`, and allows all of the same customization.
Using `ganache` programmatically from our e2e tests is much faster, as
we don't have to wait that arbitrary 5 seconds before each test as we
wait for `ganache-cli` to start up.
* Use arrow property initializer functions
* Use pure components where applicable
* Add UNSAFE_ prefix for deprecated lifecycle hooks
* Add allow UNSAFE_
* Removed unused "Component"
* Replace boron with 'fade-modal'
* Upgrade react/no-deprecated to an error
* Paste react-tooltip-component source directly
* Use arrow functions to bind `this`
* Add UNSAFE_ prefix
* Update react-redux, react-router-dom
* Remove things from inlined 'fade-modal'
* Adjust mountWithRouter to get unit tests passing again
* Remove domkit
* Add Wrapper to render-helpers
* Upgrade @storybook/addon-knobs
* add PermissionsController
remove provider approval controller
integrate rpc-cap
create PermissionsController
move provider approval functionality to permissions controller
add permissions approval ui, settings page
add permissions activity and history
move some functionality to metamask-inpage-provider
rename siteMetadata -> domainMetadata
add accountsChange notification to inpage provider
move functionality to inpage provider
update inpage provider
Remove 'Connections' settings page (#7369)
add hooks for exposing accounts in settings
rename unused messages in non-English locales
Add external extension id to metadata (#7396)
update inpage provider, rpc-cap
add eth_requestAccounts handling to background
prevent notifying connections if extension is locked
update inpage provider
Fix lint errors
add migration
review fixes
transaction controller review updates
removed unused messages
* Login Per Site UI (#7368)
* LoginPerSite original UI changes to keep
* First commit
* Get necessary connected tab info for redirect and icon display for permissioned sites
* Fix up designs and add missing features
* Some lint fixes
* More lint fixes
* Ensures the tx controller + tx-state-manager orders transactions in the order they are received
* Code cleanup for LoginPerSite-ui
* Update e2e tests to use new connection flow
* Fix display of connect screen and app header after login when connect request present
* Update metamask-responsive-ui.spec for new item in accounts dropdown
* Fix approve container by replacing approvedOrigins with domainMetaData
* Adds test/e2e/permissions.spec.js
* Correctly handle cancellation of a permissions request
* Redirect to home after disconnecting all sites / cancelling all permissions
* Fix display of site icons in menu
* Fix height of permissions page container
* Remove unused locale messages
* Set default values for openExternalTabs and tabIdOrigins in account-menu.container
* More code cleanup for LoginPerSite-ui
* Use extensions api to close tab in permissions-connect
* Remove unnecessary change in domIsReady() in contentscript
* Remove unnecessary private function markers and class methods (for background tab info) in metamask-controller.
* Adds getOriginOfCurrentTab selector
* Adds IconWithFallback component and substitutes for appropriate cases
* Add and utilize font mixins
* Remove unused method in disconnect-all.container.js
* Simplify buttonSizeLarge code in page-container-footer.component.js
* Add and utilize getAccountsWithLabels selector
* Remove console.log in ui/app/store/actions.js
* Change last connected time format to yyyy-M-d
* Fix css associated with IconWithFallback change
* Ensure tracked openNonMetamaskTabsIDs are correctly set to inactive on tab changes
* Code cleanup for LoginPerSite-ui
* Use reusable function for modifying openNonMetamaskTabsIDs in background.js
* Enables automatic switching to connected account when connected domain is open
* Prevent exploit of tabIdOriginMap in background.js
* Remove unneeded code from contentscript.js
* Simplify current tab origin and window opener logic using remotePort listener tabs.queryTabs
* Design and styling fixes for LoginPerSite-ui
* Fix permissionHistory and permission logging for eth_requestAccounts and eth_accounts
* Front end changes to support display of lastConnected time in connected and permissions screens
* Fix lint errors
* Refactor structure of permissionsHistory
* Fix default values and object modifications for domain and permissionsHistory related data
* Fix connecting to new accounts from modal
* Replace retweet.svg with connect-white.svg
* Fix signature-request.spec
* Update metamask-inpage-provider version
* Fix permissions e2e tests
* Remove unneeded delay from test/e2e/signature-request.spec.js
* Add delay before attempting to retrieve network id in dapp in ethereum-on=.spec
* Use requestAccountTabIds strategy for determining tab id that opened a given window
* Improve default values for permissions requests
* Add some message descriptions to app/_locales/en/messages.json
* Code clean up in permission controller
* Stopped deep cloning object in mapObjectValues
* Bump metamask-inpage-provider version
* Add missing description in app/_locales/en/messages.json
* Return promises from queryTabs and switchToTab of extension.js
* Remove unused getAllPermissions function
* Use default props in icon-with-fallback.component.js
* Stop passing to permissions controller
* Delete no longer used clear-approved-origins modal code
* Remove duplicate imports in ui/app/components/app/index.scss
* Use URL instead of regex in getOriginFromUrl()
* Add runtime error checking to platform, promise based extension.tab methods
* Support permission requests from external extensions
* Improve font size and colour of the domain origin on the permission confirmation screen
* Add support for toggling permissions
* Ensure getRenderablePermissionsDomains only returns domains with exposedAccount caveat permissions
* Remove unused code from LoginPerSite-ui branch
* Ensure modal closes on Enter press for new-account-modal.component.js
* Lint fix
* fixup! Login Per Site UI (#7368)
* Some code cleanup for LoginPerSite
* Adds UX for connecting to dapps via the connected sites screen (#7593)
* Adds UX for connecting to dapps via the connected sites screen
* Use openMetaMaskTabIds from background.js to determine if current active tab is MetaMask
* Delete unused permissions controller methods
* Fixes two small bugs in the LoginPerSite ui (#7595)
* Restore `providerRequest` message translations (#7600)
This message was removed, but it was replaced with a very similar
message called `likeToConnect`. The only difference is that the new
message has "MetaMask" in it. Preserving these messages without
"MetaMask" is probably better than deleting them, so these messages
have all been restored and renamed to `likeToConnect`.
* Login per site no sitemetadata fix (#7610)
* Support connected sites for which we have no site metadata.
* Change property containing subtitle info often populated by origin to a more accurate of purpose name
* Lint fix
* Improve disconnection modal messages (#7612)
* Improve disconnectAccountModalDescription and disconnectAllModalDescription messages
* Update disconnectAccountModalDescription app/_locales/en/messages.json
Co-Authored-By: Mark Stacey <markjstacey@gmail.com>
* Improve disconnectAccount modal message clarity
* Adds cancel button to the account selection screen of the permissions request flow (#7613)
* Fix eth_accounts permission language & selectability (#7614)
* fix eth_accounts language & selectability
* fix MetaMask capitalization in all messages
* Close sidebar when opening connected sites (#7611)
The 'Connected Sites' button in the accounts details now closes the
sidebar, if it is open. This was accomplished by pulling the click
handler for that button up to the wallet view component, where another
button already followed a similar pattern of closing the sidebar.
It seemed confusing to me that one handler was in the `AccountsDetails`
container component, and one was handed down from above, so I added
PropTypes to the container component.
I'm not sure that the WalletView component is the best place for this
logic, but I've put it there for now to be consistent with the add
token button.
* Reject permissions request upon tab close (#7618)
Permissions requests are now rejected when the page is closed. This
only applies to the full-screen view, as that is the view permission
requests should be handled in. The case where the user deals with the
request through a different view is handled in #7617
* Handle tab update failure (#7619)
`extension.tabs.update` can sometimes fail if the user interacts with
the tabs directly around the same time. The redirect flow has been
updated to ensure that the permissions tab is still closed in that
case. The user is on their own to find the dapp tab again in that case.
* Login per site tab popup fixes (#7617)
* Handle redirect in response to state update in permissions-connect
* Ensure origin is available to permissions-connect subcomponents during redirect
* Hide app bar whenever on redirect route
* Improvements to handling of redirects in permissions-connect
* Ensure permission request id change handling only happens when page is not null
* Lint fix
* Decouple confirm transaction screen from the selected address (#7622)
* Avoid race condtion that could prevent contextual account switching (#7623)
There was a race condition in the logic responsible for switching the
selected account based upon the active tab. It was asynchronously
querying the active tab, then assuming it had been retrieved later.
The active tab info itself was already in the redux store in another
spot, one that is guaranteed to be set before the UI renders. The
race condition was avoided by deleting the duplicate state, and using
the other active tab state.
* Only redirect back to dapp if current tab is active (#7621)
The "redirect back to dapp" behaviour can be disruptive when the
permissions connect tab is not active. The purpose of the redirect was
to maintain context between the dapp and the permissions request, but
if the user has already moved to another tab, that no longer applies.
* Fix JSX style lint errors
* Remove unused state
* Add support for one-click onboarding
MetaMask now allows sites to register as onboarding the user, so that
the user is redirected back to the initiating site after onboarding.
This is accomplished through the use of the `metamask-onboarding`
library and the MetaMask forwarder.
At the end of onboarding, a 'snackbar'-stype component will explain to the
user they are about to be moved back to the originating dapp, and it will
show the origin of that dapp. This is intended to help prevent phishing
attempts, as it highlights that a redirect is taking place to an untrusted
third party.
If the onboarding initiator tab is closed when onboarding is finished,
the user is redirected to the onboarding originator as a fallback.
Closes#6161
* Add onboarding button to contract test dapp
The `contract-test` dapp (run with `yarn dapp`, used in e2e tests) now
uses a `Connect` button instead of connecting automatically. This
button also serves as an onboarding button when a MetaMask installation
is not detected.
* Add new static server for test dapp
The `static-server` library we were using for the `contract-test` dapp
didn't allow referencing files outside the server root. This should
have been possible to work around using symlinks, but there was a bug
that resulted in symlinks crashing the server.
Instead it has been replaced with a simple static file server that
will serve paths starting with `node_modules` from the project root.
This will be useful in testing the onboarding library without vendoring
it.
* Add `@metamask/onboarding` and `@metamask/forwarder`
Both libraries used to test onboarding are now included as dev
dependencies, to help with testing. A few convenience scripts
were added to help with this (`yarn forwarder` and `yarn dapp-forwarder`)
The units for the amounts shown on the approve screen in the
transaction fee section were missing. It appears that they were present
in an early version of the approve screen (#7271) but they got lost
somewhere along the way.
Maker has upgraded its Dai token to "Multi-Collateral Dai" (MCD) and requires
all users interacting with Dai migrate their tokens to the new version. Dai
now exclusively refers to Multi-Collateral Dai and what was previouly called
Dai is now Sai (Single Collateral Dai).
In this description, Sai refers to what was (prior to the 2019-11-18) known as Dai.
Dai is the _new_ token.
This changeset:
1. Only affects users who had non-zero Sai at the old contract address
2. Displays a persistent notification for users with Sai
3. Updates the token symbol for users already tracking the Sai token
4. Bumps our direct and indirect eth-contract-metadata dependencies
The notification copy:
> A message from Maker: The new Multi-Collateral Dai token has been released. Your old tokens are now called Sai. Please upgrade your Sai tokens to the new Dai.
The copy is from the Maker team.
* Redesign approve screen
* Add translations to approve screen components
* Show account in header of approve screen
* Use state prop bool for unlimited vs custom check in edit-approval-permission
* Set option to custom on input change in edit-approval-permission
* Allow setting of approval amount to unlimited in edit-approval-permission
* Fix height of confirm-approval popup
* Ensure decimals prop passted to confirm-approve.component is correct type
* Ensure first param passed to calcTokenValue in confirm-approve.util is the correct type
* Fix e2e test of permission editing
* Remove unused code from edit-approval-permission.container
* ENS Reverse Resolution support
* Save punycode for ENS domains with Unicode characters
* Update SenderToRecipient recipientEns tooltip
* Use cached results when reverse-resolving ENS names
* Display ENS names in tx activity log
* Add estimated time to pending transactions
* add sytles for pending transactions component
* add media queries styling for pending transactions component
* fix lint errors, remove extra spaces
* refactor code to call `fetchBasicGasAndTimeEstimates` method once
* refactor code to call `getgetRenderableTimeEstimate` method once
* fix, correct export to use `transaction-time-remaining-component`
* fix indentation issues after running `yarn lint`
* newBigSigDig in gas-price-chart.utils supports strings
* Code cleanup
* Ensure fetchBasicGasAndTimeEstimates is only called from tx-list if there are pending-txs
* Move gas time estimate utilities into utility file
* Move getTxParams to transaction selector file
* Add feature flag for display of remaining transaction time in tx history list
* Fix circular dependency by removing unused import of transactionSelector in selectors.js
* Use correct feature flag property name transactionTime
* Ensure that tx list component correctly responds to turning tx time feature on
* Prevent precision errors in newBigSigDig
* Code clean up for pending transaction times
* Update transaction-time-remaining feature to count down seconds, countdown seconds and show '< 30'
* Code clean up for transaction-time-remaining feature
* Cleanup beforeunload handler after transaction is resolved
The notification window was updated to reject transactions upon close
in #6340. A handler that rejects the transaction was added to
`window.onbeforeunload`, and it was cleared in `actions.js` if it was
confirmed or rejected.
However, the `onbeforeunload` handler remained uncleared if the
transaction was resolved in another window. This results in the
transaction being rejected when the notification window closes, even
long after the transaction is submitted and confirmed. This has been
the cause of many problems with the Firefox e2e tests.
Instead the `onbeforeunload` handler is cleared in the
`componentWillUnmount` lifecycle function, alongside where it's set in
the first place. This ensures that it's correctly unset regardless
of how the transaction was resolved, and it better matches user
expectations.
* Fix indentation and remove redundant export
The `run-all.sh` Bash script now uses consistent indentation, and is
consistent about only re-exporting the Ganache arguments when they
change.
* Ensure transactions are completed before checking balance
Various intermittent e2e test failures appear to be caused by React
re-rendering the transaction list during the test, as the transaction
goes from pending to confirmed. To avoid this race condition, the
transaction is now explicitly looked for in the confirmed transaction
list in each of the tests using this pattern.
* Enable all e2e tests on Firefox
The remaining tests that were disabled on Firefox now work correctly.
Only a few timing adjustments were needed.
* Update Firefox used in CI
Firefox v70 is now used on CI instead of v68. This necessitated
rewriting the function where the extension ID was obtained because the
Firefox extensions page was redesigned.
* tests - create tests for pending middlewares
* transactions - add r,s,v values to the txMeta to match the JSON rpc response
* network - add new middleware for eth_getTransactionByHash that the checks pending tx's for a response value
* transactions/pending - use getTransactionReceipt for checking if tx is in a block
* meta - file rename
If the extension ID is set, an alternate title and subtitle are used
for the Connect Request screen. The title is always `External
Extension`, and the subtitle is `Extension ID: [id]` instead of the
origin (which would just be `[extension-scheme]://[id]` anyway).
The hostname for the site is used as a fallback in case it has no
title.
The artificial hostname set for internal connections has been renamed
from 'MetaMask' to 'metamask' because URL objects automatically
normalize hostnames to be all lower-case, and it was more convenient to
use a URL object so that the parameter would be the same type as used
for an untrusted connection.
* Add a delay after connecting
This addresses an intermittent test failure where the MetaMask
Notification window cannot be found. It appears to be caused by the
Send button being clicked too soon after connecting to a dapp, before
the background has had a chance to process the approval. The premature
send is ignored and the window never appears.
This delay (2 seconds) should be sufficient time for the connection to
be processed. A later 5-second delay was also reduced to 2 seconds.
* Select onboarding buttons by button text
The onboarding buttons were being selected using the classname, which
was common to all onboarding buttons. This resulting in buttons being
selected just before a page transition, leading to an error about
the element reference being stale when a click was attempted.
The CSS class selectors have been replaced by text selectors, which
are more specific and shouldn't be at risk of resolving early. They're
also easier to read.
* Remove retypeSeedPhrase function
This function was used to re-type the seed phrase in the event that a
failure occurred when confirming the seed phrase. I'm not sure what
failure this was meant to address exactly, but this contingency hasn't
been needed for some time. We can tell that it hasn't been used because
it wasn't updated for the incremental account security changes, so it
couldn't have worked since then (it would have clicked the wrong
button).
* Use `AdvancedGasInputs` in `AdvancedTabContent`
The `AdvancedGasInputs` component was originally extracted from the
`AdvancedTabContent` component, duplicating much of the rendering
logic. They have since evolved separately, with bugs being fixed in one
place but not the other.
The inputs and outputs expected weren't exactly the same, as the
`AdvancedGasInputs` component converts the input custom gas price and
limit, and it converts them both in the setter methods as well.
The `GasModalPageContainer` had to be adjusted to avoid converting
these values multiple times.
Both components dealt with input debouncing separately, both in less
than ideal ways. `AdvancedTabContent` didn't debounce either field, but
it did debounce the check for whether the gas limit field was below the
minimum value. So if a less-than-minimum value was set, it would be
propogated upwards and could be saved if the user clicked 'Save'
quickly enough. After a second delay it would snap back to the minimum
value. The `AdvancedGasInputs` component debounced both fields, but
it would replace any gas limit below the minimum with the minimum
value. This led to a problem where a brief pause during typing would
reset the field to 21000.
The `AdvancedGasInputs` approach was chosen, except that it was
updated to no longer change the gas limit if it was below the minimum.
Instead it displays an error. Parent components were checked to ensure
they would detect the error case of the gas limit being set too low,
and prevent the form submission in those cases. Of the three parents,
one had already dealt with it correctly, one needed to convert the
gas limit from hex first, and another needed the gas limit check added.
Closes#6872
* Cleanup send components
Empty README files have been removed, and a mistake in the index file
for the send page has been corrected. The Gas Slider component class
name was updated as well; it looks like it was originally created from
`AdvancedTabContent`, so it still had that class name.
* Ensure correct transaction category when sending to contracts but there is no txParams data
* Update gas when pasting address in send
* Gracefully fall back is send.util/estimateGas when blockGasLimit from background is falsy
* Remove network request frontend fallback for blockGasLimit
* Add some needed slow downs to e2e tests
The 3Box initialization is triggered by login, but it no longer blocks
the login from finishing. The 3Box initialization is designed to run in
the background, so there's no reason to block on it.
* Add UseNonce toggle
* Get the toggle actually working and dispatching
* Display nonce field on confirmation page
* Remove console.log
* Add placeholder
* Set customNonceValue
* Add nonce key/value to txParams
* remove customNonceValue from component state
* Use translation file and existing CSS class
* Use existing TextField component
* Remove console.log
* Fix lint nits
* Okay this sorta works?
* Move nonce toggle to advanced tab
* Set min to 0
* Wrap value in Number()
* Add customNonceMap
* Update custom nonce translation
* Update styles
* Reset CustomNonce
* Fix lint
* Get tests passing
* Add customNonceValue to defaults
* Fix test
* Fix comments
* Update tests
* Use camel case
* Ensure custom nonce can only be whole number
* Correct font size for custom nonce input
* UX improvements for custom nonce feature
* Fix advanced-tab-component tests for custom nonce changes
* Update title of nonce toggle in settings
* Remove unused locale message
* Cast custom nonce to string in confirm-transaction-base.component
* Handle string conversion and invalid values for custom nonces in handler
* Don't call getNonceLock in tx controller if there is a custom nonce
* Set nonce details for cases where nonce is customized
* Fix incorrectly use value for deciding whether to getnoncelock in approveTransaction
* Default nonceLock to empty object in approveTransaction
* Reapply use on nonceLock in cases where customNonceValue in approveTransaction.
* Show warning message if custom nonce is higher than MetaMask's next nonce
* Fix e2e test failure caused by custom nonce and 3box toggle conflict
* Update nonce warning message to include the suggested nonce
* Handle nextNonce comparison and update logic in lifecycle
* Default nonce field to suggested nonce
* Clear custom nonce on reject or confirm
* Fix bug where nonces are not shown in tx list on self sent transactions
* Ensure custom nonce is reset after tx is created in background
* Convert customNonceValue to number in approve tranasction controller
* Lint fix
* Call getNextNonce after updating custom nonce
* Delete unused code
* Run threebox imports through migrations
* Remove 3box feature flag
* Remove unnecessary use of 'type' in threebox._updatePlugin
* Fix threebox controller getLastUpdated
* Turn off threebox by default
* Rename restoredFromThreeBox to showRestorePrompt
* Remove accientally added method from threebox controller
* Restore from threebox on import from unlock screen
* Throw on non 404 errors from Box.getconfig in new3Box
* Adds ab test controller with a fullScreenVsPopup test
* Add migration for fullScreenVsPopup state
* Move abtest state under an 'abtests' object.
* MetaMask shows fullScreen group of a/b test unapproved txs in a full browser tab
* Ensure cancel metrics event in confirm-transaction-base.component.js is sent in all cases
* Switch to existing tab for unapproved tx if it exists when opening in full screen
* Send metrics event for entering a/b test from confirm screen
* Fix lint, unit and integration tests related to a/b test code
* Remove unnecessary tabs.query call in triggerUiInNewTab
* Adds threebox controller
* Adds threebox approval modal
* Fix unit tests and lint after addition of threebox
* Correct threebox behaviour after rejecting request for backup; fixes e2e tests.
* Update threebox controller for automatic syncing
* Ensure frontend locale updates when preferences are changed via direct update within controller
* Add toggle in settings for 3box syncing
* Update threebox controller for latest 3box version
* Delete unnecessary frontend changes for threebox integration
* Backing up address book contacts with threebox
* Update unit tests for 3box-integration additions
* Only enable threebox by default for new wallets
* Mock globals for correct unit tests
* 3box '1.10.2' -> '^1.10.2'
* Correct capilalization on 3Box
* Use log.debug instead of console.log in threebox controller
* Update yarn.lock
* Remove edge build
* Split 3box module into background deps js file
* extra bundle opts for bg-libs
* sync yarn.lock
* new3Box logic
* Show confirm threebox restore after import
* Remove bg-libs.js from manifest file for dev builds
* Switch 3Box controller to using the spaces api (instead of the profile api)
* Finalize switching to spaces api and only restoring from 3box after import
* Update metamask-controller-test.js for threebox controller changes
* Make threebox modal style consistent with others and update success button wording
* Use mock 3box when in test
* Correct 3box modal header
* Remove unnecessary property of threebox controller provider
* Remove unnecessary method calls after restoration from 3box in the threebox-restore-confirm modal.
* Replace setThreeBoxSyncingPermission calls in routes/index.js with turnThreeBoxSyncingOn
* Replace erroneous use of with
* Replace erroneous use of threeboxSyncing with threeBoxSyncingAllowed in advancted-tab directory
* Lint fixes for 3box changes
* Log errors encountered when updating 3Box
* Remove unnecessary parameter from state update
* Add timeout to initial 3Box sync
The initial 3Box sync will now timeout after 1 minute. If the timeout
is triggered, 3Box is disabled and cannot be re-enabled unless the
initial sync does finally finish. If it never finishes, 3Box cannot
be enabled unless the extension is reinstalled.
The Advanced Settings page was updated to show this option as disabled
in that circumstance, with a new discription explaining why it's
disabled. The UI here could certainly be improved.
Additionally, "on" and "off" labels were added to the toggle to match
the other toggles on the Advanced Settings page.
* Use non-minified 3Box module
We had previously used the minified 3Box module to avoid a build error
encountered when `envify` was processing the `libp2p` module (which is
used by 3Box). The build would fail because `esprima` (used by `envify`)
is incompatible with the object spread/rest operator (which is used in
`libp2p`).
That issue has been solved by adding a global Babelify transformation
specifically for transpiling out the object rest/spread operator from
dependencies. It has been targetted to only affect `libp2p` to avoid
extending the build time too much. This workaround can be used until
a new version of `esprima` is released that includes this bug fix.
* Use app key addresses for threebox
* Replace use of modal for confirming 3box restoration with a home notification
* Adds e2e tests for restoring from threebox
* Update eth-keyring-controller to 5.1.0
* Correct parameters passed to getAppKeyAddress in threebox.js
* Add prefix to origin passed to getAppKeyAddress in threebox.js
* Remove unused locale message.
* Prevent CORS errors in firefox e2e tests
* Ensure extraneous scripts are excluded from the local test dev build
* Move threeBoxLastUpdate state from home.component to redux
* Threebox PR code cleanup
* Always use first address when initializing threebox
* Replace setRestoredFromThreeBox api with setRestoredFromThreeBoxToFalse and setRestoredFromThreeBoxToTrue
* Update development/metamaskbot-build-announce.js to include ui-libs and bg-libs in hard coded bundle list
* Update test/e2e/threebox.spec.js to use new helpers added with pull #7144
* Make setFeatureFlag available on the ui window during testing
* Hide threebox feature behind a feature flag that can only be activated via dev console
* Remove unnecessary migration of threebox feature flag
* Prevent this.init() call in threebox constructor if feature flag is not turned on
* Prevent threebox notification from showing if feature flag is falsy
* http://localhost/8889 -> http://localhost/* in gulp manifest:testing tasks
* Make chainId available in the metamask-inpage-provider
* Update metamask-inpage-provider to 2.1.0
* Add e2e tests for ethereum.on events
* Move chainId constants to lib/enums.js
* Don't use new chainId enums in createInfuraClient
* Fix app/scripts/lib/select-chain-id.js
* Prevent multiple warnings for the same locale message
Our i18n helper issues warnings whenever a requested message is
missing. These warnings are helpful in assisting translation efforts,
but they can be distracting otherwise. They're especially problematic
for locales that are missing many messages. My browser ended up
crashing on more than one occasion due to the sheer volume of warnings.
The warning has been updated to only be issued once per missing key.
This required updating the method to pass in the current locale. The
current locale was added to the warning itself as well, which could be
helpful for cases where a message is missing in both the current locale
and the fallback ('en').
* Change locale and localeMessages as single action
Updating the current locale and the locale messages resulted in two
renders, and during the first the state was inconsistent (it would say
the locale had changed to the new one, but still be using the old set
of locale messages). Instead the locale is now updated with one atomic
action.
This was required after adding the locale to the missing locale message
warning, as otherwise it would say the message was missing from the
wrong locale.
* Add missing test descriptions
* Fix async tests that expect a rejection
These tests expected the function under test to return a rejected
promise, and had assertions to be run in the `catch` clause. However,
the tests would still pass if the function didn't reject, with
the assertions never being run.
The tests have been updated to fail if the function doesn't throw.
* Handle ignored promise rejection
In the case where `forceUpdateMetamaskState` rejects, the function
`setSeedPhraseBackedUp` would never resolve. It has been updated to
pass along the rejection instead.
* Return after rejecting promise in action
A few actions would continue after encountering an error, resulting in
errors being compounded. Instead all actions will now return after
encountering an error (which it looks like was the intention in these
cases anyway).
