We are soon removing the automatic refresh on network change behavior.
A warning has been added to ensure sites know about this upcoming
change.
Any site that calls `.enable` is advised to use a
`networkChanged` event handler to reload manually if they rely upon
that behavior. They are also advised to set the flag
`autoRefreshOnNetworkChange` to `false` to opt-out of the reload
behavior early.
This warning might be irritating for certain sites, as they might be
indifferent to whether or not the site reloads, and not eager to set a
flag to opt-in early just to silence the warning. However there was no
other obvious way to warning the right people about this change, as
any warning prior to an actual reload would only be seen by the few
people that set their browser console to preserve logs.
Relates to #3599
* Fix styling of `.transaction-list`
* Filter `incomingTxListSelector` by network as well
* Start and stop block tracker polling in incoming tx controller
* Add fetch with abort in bg for `IncomingTxController`
* Nix notification for Share Address
* Add Connections settings tab in place of privacy mode toggle
* Split ProviderApprovalController into two stores
* Remove privacyMode feature flag altogether
* Add migration to remove privacyMode feature flag
* Ensure address book send flow correctly matches address book addresses to ens addresses
* Use nodify on background.setAddressBook to receive correct result in actions.js
* Better error handling for actions.js addToAddressBook
* Eliminate unnecessary data normalization and move more data manipluation to ens-input and send-content containers
* Add background environment type
The `getEnvironmentType` method now checks for the background
environment as well, instead of returning 'notification' for that case.
Instead of adding another regex for the background path, the regexes
for each environment have been replaced with the URL constructor[0].
This is the standard method of parsing URLs, and is available in all
supported browsers.
[0]: https://developer.mozilla.org/en-US/docs/Web/API/URL
* Add note regarding a missing manifest permission
The `url` parameter to `tabs.query(...)` requires the `tabs` permission,
and will be ignored otherwise. We are missing this permission, so that
call does not work.
* Close window after opening full screen
The browser behaviour when opening a new tab differs between Chrome and
Firefox. In the case of a popup, Chrome will close the popup whereas
Firefox will leave it open. In the case of the notification window,
Chrome will move the new tab to the foreground, whereas Firefox will
leave the notification window in the foreground when opening a new tab.
We always want to close the current UI (popup or notification) when
switching to a full-screen view. The only exception to this is when the
switch is triggered from the background, which has no UI.
Closes#6513, #6685
* Replace use of backup-notification with use of home notification
* Pin notifications relative to window
* Remove unneeded isRequired condition on some home.component properties
* Refactor rendering of home notifications
* UX for multiple notifications
* Adds dismissal to provider request notification.
* Fix test failures
The e2e tests have been updated to reference `home-notification`
classnames instead of the removed `background-notification`. The
active tab proptypes and default values were updated as well.
The notice asking whether you wanted to connect to a site was showing
up in places it shouldn't, like on the Firefox/Chrome settings pages
and on our fullscreen extension. It has now been restricted to only
be displayed for active tabs with specific protocols:
* http
* https
* dat
* dweb
* ipfs
* ipns
* ssb
This prevents the notice from being shown on settings pages, browser
extensions, and files such as PDFs.
The minimum version supported is now Firefox 60. This is the current
Extended Support Release. Various features we use were not supported by
Firefox 53, such as `browser_action.default_popup`, `tabs.query`, and
`permissions:unlimitedStorage`.
The `seedWords` state was removed from the PreferencesController
recently in #6920. That state hadn't been used in some time, and there
was a long period during which `seedWords` was periodically scrubbed
from the state, so it's highly unlikely that it still exists in state
for most users. It's hard to guarantee that it _doesn't_ though,
especially if a user hasn't opened MetaMask in a few months.
* Implements ability to defer seed phrase backup to later
* Adds incremental-security.spec.js, including test dapp that sends signed tx with stand alone localhost provider
* Update metamask-responsive-ui for incremental account security changes
* Update backup-notification style and fix responsiveness of seed phrase screen
* Remove uneeded files from send-eth-with-private-key-test/
* Apply linguist flags in .gitattributes for send-eth-with-private-key-test/ethereumjs-tx.js
* Improve docs in controllers/onboarding.js
* Clean up metamask-extension/test/e2e/send-eth-with-private-key-test/index.html
* Remove unnecessary newlines in a couple first-time-flow/ files
* Fix import of backup-notification in home.component
* Fix git attrs file
* Style Send Header
* Move Send to-row to send view and restyle
* Add "Recents" group to select recipient view
* Rename SendToRow to AddRecipient
* Basic UI and Layout
* New ENSInput component
* wip - fuzzy search for input
* small refactor
* Add Dialog
* contact list initial
* initial error on invalid address
* clean up edit
* Click to open modal
* Create AddToAddressBookModal component
* Modal styling and layout
* modal i18n
* Add to Addressbook
* ens wip
* ens wip
* ENS Resolution
* Reset input
* Send to explicit address
* Happy Path Complete
* Add back error checking
* Reset send-to when emptying input
* Add back warning object
* Fix linter
* Fix unit test #1 - fix import paths
* Remove dead tests
* One more to go
* Fix all unit tests
* add unit test for reducers and actions
* test rendering AddRecipient
* Add tests for dialog boxes in AddRecipient
* Add test for validating
* Fix linter
* Fix e2e tests
* Token send e2e fix
* Style View Contact
* Style edit-contact
* Fix e2e
* Fix from-import-beta-ui e2e spec
* Make section header say "add recipient” by default
* Auto-focus add recipient input
* Update placeholder text
* Update input title font size
* Auto advance to next step if user paste a valid address
* Ellipsify address when recipient is selected
* Fix app header background color on desktop
* Give each form row a margin of 16px
* Use .container/.component naming pattern for ens-input
* Auto-focus on input when add to addressbook modal is opened; Save on Enter
* Fix and add unit test
* Fix selectors name in e2e tests
* Correct e2e test token amount for address-book-send changes
* Adds e2e test for editing a transaction
* Delete test/integration/lib/send-new-ui.js
* Add tests for amount max button and high value error on send screen to test/e2e/metamask-ui.spec.js
* lint and revert to address as object keys
* add chainId based on current network to address book entry
* fix test
* only display contacts for the current network
* Improve ENS message when not found on current network
* Add error to indicate when network does not support ENS
* bump gaba
* address book, resolve comments
* Move contact-list to its own component
* De-duplicate getaddressbook selector and refactor name selection logic in contact-list-tab/
* Use contact-list component in contact-list-tab.component (i.e. in settings)
* Improve/fix settings headers for popup and browser views
* Lint fixes related to address book updates
* Add 'My accounts' page to settings address book
* Update add new contact button in settings to match floating circular design
* Improve styles of view contact page
* Improve styles and labels of the add-contact.component
* Further lint fixes related to address book updates
* Update unit tests as per address book updates
* Ensure that contact list groups are sorted alphabetically
* Refactor settings component to use a container for connection to redux; allow display of addressbook name in settings header
* Decouple ens-input.component from send context
* Add ens resolution to add contact screen in settings
* Switching networks when an ens address is shown on send form removes the ens address.
* Resolve send screen search for ensAddress to matching address book entry if it exists
* Show resolved ens icon and address if exists (settings: add-contact.component)
* Make the displayed and copied address in view-contact.component the checksummed address
* Default alias state prop in AddToAddressBookModal to empty string
* Use keyCode to detect enter key in AddToAddressBookModal
* Ensure add-contact component properly updates after QR code detection
* Fix display of all recents after clicking 'Load More' in contact list
* Fix send screen contact searching after network switching
* Code cleanup related to address book changes
* Update unit tests for address book changes
* Update ENS name not found on network message
* Add ens registration error message
* Cancel on edit mode takes user back to view screen
* Adds support for memo to settings contact list view and edit screens
* Modify designs of edit and view contact in popup environment
* Update settings content list UX to show split columns in fullscreen and proper internal navigation
* Correct background address book API usages in UI
`seedWords` used to be stored on the metamask state temporarily at
certain points. This hasn't been the case since #5994, but references
to this state remained. All of the logic remained for correctly updating
these `seedWords`, handling them during navigation, and scrubbing them
from the state.
However the state was never updated in practice. The `seedWords` are
still returned by `verifySeedPhrase`, and they're still stored in
component state in a few places. But they aren't ever set in the Redux
metadata state or the Preferences controller.
All references to this state have been removed, along with any logic
for interacting with this state. A few unused actions were removed as
well.
The CSS is now served as an external file instead of being injected.
This was done to improve performance. Ideally we would come to a middle
ground between this and the former behaviour by injecting only the CSS
that was required for the initial page load, then lazily loading the
rest. However that change would be more complex. The hope was that
making all CSS external would at least be a slight improvement.
Performance metrics were collected before and after this change to
determine whether this change actually helped. The metrics collected
were the timing events provided by Chrome DevTools:
* DOM Content Loaded (DCL) [1]
* Load (L) [2]
* First Paint (FP) [3]
* First Contentful Paint (FCP) [3]
* First Meaningful Paint (FMP) [3]
Here are the results (units in milliseconds):
Injected CSS:
| Run | DCL | L | FP | FCP | FMP |
| :--- | ---: | ---: | ---: | ---: | ---: |
| 1 | 1569.45 | 1570.97 | 1700.36 | 1700.36 | 1700.36 |
| 2 | 1517.37 | 1518.84 | 1630.98 | 1630.98 | 1630.98 |
| 3 | 1603.71 | 1605.31 | 1712.56 | 1712.56 | 1712.56 |
| 4 | 1522.15 | 1523.72 | 1629.3 | 1629.3 | 1629.3 |
| **Min** | 1517.37 | 1518.84 | 1629.3 | 1629.3 | 1629.3 |
| **Max** | 1603.71 | 1605.31 | 1712.56 | 1712.56 | 1712.56 |
| **Mean** | 1553.17 | 1554.71 | 1668.3 | 1668.3 | 1668.3 |
| **Std. dev.** | 33.41 | 33.43 | 38.16 | 38.16 | 38.16 |
External CSS:
| Run | DCL | L | FP | FCP | FMP |
| :--- | ---: | ---: | ---: | ---: | ---: |
| 1 | 1595.4 | 1598.91 | 284.97 | 1712.86 | 1712.86 |
| 2 | 1537.55 | 1538.99 | 199.38 | 1633.5 | 1633.5 |
| 3 | 1571.28 | 1572.74 | 268.65 | 1677.03 | 1677.03 |
| 4 | 1510.98 | 1512.33 | 206.72 | 1607.03 | 1607.03 |
| **Min** | 1510.98 | 1512.33 | 199.38 | 1607.03 | 1607.03 |
| **Max** | 1595.4 | 1598.91 | 284.97 | 1712.86 | 1712.86 |
| **Mean** | 1553.8025 | 1555.7425 | 239.93 | 1657.605 | 1657.605 |
| **Std. dev.** | 29.5375 | 30.0825 | 36.88 | 37.34 | 37.34 |
Unfortunately, using an external CSS file made no discernible improvement
to the overall page load time. DCM and L were practically identical, and
FCP and FMP were marginally better (well within error margins).
However, the first paint time was _dramatically_ improved. This change
seems worthwhile for the first paint time improvement alone. It also
allows us to delete some code and remove a dependency.
The old `css.js` module included two third-party CSS files as well, so
those have been imported into the main Sass file. This was easier than
bundling them in the gulpfile.
The resulting CSS bundle needs to be served from the root because we're
using a few `@include` rules that make this assumption. We could move
this under `/css/` if desired, but we'd need to update each of these
`@include` rules.
Relates to #6646
[1]: https://developer.mozilla.org/en-US/docs/Web/Events/DOMContentLoaded
[2]: https://developer.mozilla.org/en-US/docs/Web/Events/load
[3]: https://developers.google.com/web/fundamentals/performance/user-centric-performance-metrics
Set the minimum browser version supported in the extension manifest.
Currently we only ship the extension on Chrome and Firefox, so the
minimum version has been set for those two browsers.
Relates to #6805
* Abstract domain provider from its stream transport
Creating new provider-consuming extensions, like [a new
platform](https://github.com/MetaMask/metamask-extension/blob/develop/docs/porting_to_new_environment.md)
can be frustrating for new contributors because our provider
construction has been tangled with our streaming interface.
Here I've broken up our streaming domain connection from the provider
construction, so developers can more easily construct local and
domain-restricted providers without dealing with streams.
* Abstract public API from stream interface
* clean up noop
* Document non-streaming interface
* getSiteMetadata must be async
* Clean up filters on stream end
* Document cleaning up filters
* Allow named filterMiddleware to be cleaned up
* Linted
* Require site metadata
* Destroy any destroyable middleware during cleanup
* Lint
The Drizzle tests have not been used for some time. They were used to
ensure compatibility with newer versions of `web3` v1. If we want to
re-add tests to ensure compatibility with newer `web3` versions, we
should find some way of doing that more reliably than was done here -
these tests were somewhat flaky and unreliable.
We've been using the `eslint-plugin-json` plugin for some time, but we
haven't been visiting `.json` files in the lint script. The lint script
has now been updated to incude `.json` files, which means any invalid
JSON will result in a lint error.
Unfortunately this JSON plugin doesn't seem to apply the other eslint
rules (such as `key-spacing`) to the JSON files. I wasn't able to find a
way to get that to work. Instead I manually auto-formatted each of the
locale `message.json` files, which fixed many whitespace
inconsistencies.
The `states.json` file was deleted completely, as it appears to be
unused. It wasn't a valid JSON file anyway, it was JavaScript. It looks
like a `states.js` file is automatically generated, but an old copy was
accidentally saved as `states.json` and included in the repo.
Many duplicate key errors were found and fixed in the
`development/states/` JSON files.
`package-lock.json` was added to `.eslintignore` because it was very
slow to lint, and linting it doesn't provide much value.
* Add loading spinner to pending tx status label.
* Add border around account icon in top right
* Change style of settings toggle buttons; wrap with local components
* Eliminate large space after settings labels when no description
* Remove network form from advanced tab of settings
* Keep new account container height to contents when in full screen
While working on #6805, I noticed that many variables were being used
before they were declared. Technically this worked fine in practice
because we were using the `transform-es2015-block-scoping` Babel plugin,
which transforms `let` and `const` to `var`, which is hoisted. However,
after removing that Babel transformation, many things broke.
All instances of variables or classes being used before declared have
been fixed.
The `no-use-before-define` eslint rule has been added to catch these
cases going forward. The rule is disabled for function declarations for
the moment, because those are always hoisted. We could disable that too
if we want to, but it's purely stylistic and would require a lot more
changes.
* Introduce delay for eth_estimateGas calls with in test
* Add test that fails when gas estimates of contract method calls without gas are too high.
* Get transaction gas data from unApprovedTxs instead of confirmTransaction
* Fix selection of gas data in gas-modal-page-container.container
* Lint changes related to Version-6.7.2-gasLimitFix
* Fix e2e tests on Version-6.7.2-gasLimitFix
* Fix unit and integration tests for changes from Version-6.7.2-gasLimitFix
* more e2e fixes
* Add assertions for transaction values on confirm screen
* Fix display of transaction amount on confirm screen.
* Introduce delay for eth_estimateGas calls with in test
* Add test that fails when gas estimates of contract method calls without gas are too high.
* Get transaction gas data from unApprovedTxs instead of confirmTransaction
* Fix selection of gas data in gas-modal-page-container.container
* Lint changes related to Version-6.7.2-gasLimitFix
* Fix e2e tests on Version-6.7.2-gasLimitFix
* Fix unit and integration tests for changes from Version-6.7.2-gasLimitFix
* more e2e fixes
* Add assertions for transaction values on confirm screen
* Fix display of transaction amount on confirm screen.
This silences a warning message that was printed to the console whenever
this module was loaded during tests.
The API changes between these two versions were reviewed carefully for
differences. The only difference made was to `PBKDF2_HMAC_SHA256.bytes`,
which was replaced by `Pbkdf2HmacSha256`.
The length argument no longer has a default value, so it has been set
to match what the default value was in the previous version we used,
which is 32 (the SHA256 hash size).
* transactions/pending - check nonce against the network and mark as dropped if not included in a block
* transactions/pending - unifiy "dropped" txs
* transactions/pending - test - fix for new expected behavior
* fix comment
* transactions/pending - clean up dropped event
* fix spelling
Co-Authored-By: frankiebee <frankie.diamond@gmail.com>
* nit fix
* test/tx-pending - clarify test description
* Set a default value for code in _determineTransactionCategory
* Adds e2e tests that fail when token txs without gas param are not properly handled.
* Adds unit tests for _determineTransactionCategory
* Base error throwing and simple gas setting in estimateTxGas on transactionCategory
* Add networks tab to settings, with header.
* Adds network list to settings network tab.
* Adds form to settings networks tab and connects it to network list.
* Network tab: form adding and editing working
* Settings network form properly handles input errors
* Add translations for settings network form
* Clean up styles of settings network tab.
* Add popup-view styles and behaviour to settings network tab.
* Fix save button on settings network form
* Adds 'Add Network' button and addMode to settings networks tab
* Lint fix for settings networks tab addition
* Fix navigation in settings networks tab.
* Editing an rpcurl in networks tab does not create new network, just changes rpc of old
* Fix layout of settings tabs other than network
* Networks dropdown 'Custom Rpc' item links to networks tab in settings.
* Update settings sidebar networks subheader.
* Make networks tab buttons width consistent with input widths in extension view.
* Fix settings screen subheader height in popup view
* Fix height of add networks button in popup view
* Add optional label to chainId and symbol form labels in networks setting tab
* Style fixes for networks tab headers
* Add ability to customize block explorer used by custom rpc
* Stylistic improvements+fixes to custom rpc form.
* Hide cancel button.
* Highlight and show network form of provider by default.
* Standardize network subheader name to 'Networks'
* Update e2e tests for new settings network form
* Update unit tests for new rpcPrefs prop
* Extract blockexplorer url construction into method.
* Fix broken styles on non-network tabs in popup mode
* Fix block explorer url links for cases when provider in state has not been updated.
* Fix vertical spacing of network form
* Don't allow click of save button on network form if nothing has changed
* Ensure add network button is shown in popup view
* Lint fix for networks tab
* Fix block explorer url preference setting.
* Fix e2e tests for custom blockexplorer in account details modal changes.
* Update integration test states to include frequentRpcList property
* Fix some capitalizations in en/messages.json
* Remove some console.logs added during custom rpc form work
* Fix external account link text and url for modal and dropdown.
* Documentation, url validation, proptype required additions and lint fixes on network tab and form.
* eslint: Check for unused function arguments
* eslint: Ignore unused '_' in argument list
Also allow any number of '_' e.g., '__' or '___' which is to be used sparingly
* Remove and rename unused arguments
* Adds a transactionCategory to txMeta for use in UI
* Update transaction controller and tx-gas-util documentation on new code param in multiple functions.
* Add i18n strings
* Finish Auto timeout
* Fix linter
* Fix copies
* Add unit test to Advanced Tab component
* Add back actions and container
* Add basic test to ensure container completeness
* No zero, fix linters
* restrict negative in input
* Ensure home screen does not render if there are unapproved txs (#6501)
* Ensure that the confirm screen renders before the home screen if there are unapproved txs.
* Only render confirm screen before home screen on mount.
* inpage - revert _metamask api to isEnabled isApproved isUnlocked
* Send metrics event from backend for on chain transaction failures
* Passes state object to backEndMetaMetricsEvent, and adds getMetaMetricState selector
* Opens the original webpage from where installation of MetaMask was requested
* Asking for dynamic permissions
* code for forwarder/without extra permissions
* Lint fix for onboardingComplete message sending code.
* Move send to pages/
* Fix unit tests
* Finish UI
* Integrate asset dropdown to send actions
* Remove console.log
* Hide asset change during edit
* Enable switch from send token to seand eth
* Enable switching from token to eth when editing
* Fix linter
* Fixing test
* Fix unit tests
* Fix linter
* Fix react warning; remove console.log
* fix flat test
* Add metrics
* Address code review comments
* Consistent spacing between send screen form rows.
* Reduce height of gas buttons on send screen.
* Make send screen gas button height dependent on size of contents.
* Check balance before showing cancel
* Fix linter
* Use existing helper methods for calculating increased cancel price
* Add tooltip for disabled button
* Lint fix for cancelError branch.
* Disabling of cancel button should account for value of tx.
* feat: `inpageProvider.autoRefreshOnNetworkChange` to allow dapps to control if it refreshes or not
* feat: check the `autoRefreshOnNetworkChange` before a refresh
* fix linting error
* fix: use `window.ethereum` now `web3.ethereum`
* Add metametrics provider and util.
* Add backend api and state for participating in metametrics.
* Add frontend action for participating in metametrics.
* Add metametrics opt-in screen.
* Add metametrics events to first time flow.
* Add metametrics events for route changes
* Add metametrics events for send and confirm screens
* Add metametrics events to dropdowns, transactions, log in and out, settings, sig requests and main screen
* Ensures each log in is measured as a new visit by metametrics.
* Ensure metametrics is called with an empty string for dimensions params if specified
* Adds opt in metametrics modal after unlock for existing users
* Adds settings page toggle for opting in and out of MetaMetrics
* Switch metametrics dimensions to page level scope
* Lint, test and translation fixes for metametrics.
* Update design for metametrics opt-in screen
* Complete responsive styling of metametrics-opt-in modal
* Use new chart image on metrics opt in screens
* Incorporate the metametrics opt-in screen into the new onboarding flow
* Update e2e tests to accomodate metametrics changes
* Mock out metametrics network requests in integration tests
* Fix tx-list integration test to support metametrics provider.
* Send number of tokens and accounts data with every metametrics event.
* Update metametrics event descriptor schema and add new events.
* Fix import tos bug and send gas button bug due to metametrics changes.
* Various small fixes on the metametrics branch.
* Add origin custom variable type to metametrics.util
* Fix names of onboarding complete actions (metametrics).
* Fix names of Metrics Options actions (metametrics).
* Clean up code related to metametrics.
* Fix bad merge conflict resolution and improve promise handling in sendMetaMetrics event and confrim tx base
* Don't send a second metrics event if user has gone back during first time flow.
* Collect metametrics on going back from onboarding create/import.
* Add missing custom variable constants for metametrics
* Fix metametrics provider
* Make height of opt-in modal responsive.
* Adjust text content for opt-in modal.
* Update metametrics event names and clean up code in opt-in-modal
* Put phishing warning step next to last in onboarding flow
* Link terms of service on create and import screens of first time flow
* Add subtext to options on the onboarding select action screen.
* Fix styling of bullet points on end of onboarding screen.
* Combine phishing warning and congratulations screens.
* Fix placement of users if unlocking after an incomplete onboarding import flow.
* Fix capitalization in opt-in screen
* Fix last onboarding screen translations
* Add link to 'Learn More' on the last screen of onboarding
* Code clean up: metametrics branch
* Update e2e tests for phishing warning step removal
* e2e tests passing on metametrics branch
* Different tracking urls for metametrics on development and prod
* Action select step of onboarding flow added.
* Update navigation on create and import password screens.
* Adds terms of service checkbox to create and import account screens.
* Add security warning to jazzicon intro step
* Update and streamline unique image to confirm seed steps of first time flow.
* UI touch ups to welcome screen.
* UI touch up on select action page
* Fix first time import flow.
* Add end of flow screen to first time flow
* Replace unique image screen with updated fishing warning screen.
* Update e2e tests for onboarding flow changes.
* Add required translations to onboarding flow.
* Update design of select action screen to emphasize create new wallet option.
* Clean up onboarding flow code.
* Remove notice related code from first-time-flow directory.
* Use updater function argument in new-account.component
* Extract advanced gas input controls to their own component
* Add advanced inline gas toggle to settings
* Add optional advanced inline gas to send send screen
* Adds optional advanced gas inputs to the confirm screen
* Add info modals for advanced gas inputs.
* Fix translation of advance gas toggle description.
* Lint and unit test fixes for inline-advanced-gas-inputs
* Increase margin above advanced options button on send screen
* Move methods from constructor to property syntax in advanced-gas-inputs.component
* mm-controller - dont overwrite existing rpc settings
* ui-networkDropdown - dont pass old network as chainId
* add methods preferencesController.updateRpc and metamaskController.updateAndSetCustomRpc
* use updateAndSetCustomRpc in settings to allow rpcs to be updated
* use new rpc as nickname if no nick name has been supplied
* fix update rpc method
* Refactor and fix styling for first time flow. Remove seed phrase from persisted metamask state
* Fix linting and tests
* Fix translations, initialization notice routing
* Fix drizzle tests
* Fix e2e tests
* Fix integration tests
* Fix styling
* Fix migration naming from 030 to 031
* Open extension in browser when user has not completed onboarding
* up to E's in translation, starting from about 60% incomplete
* Spanish at 100%
* Integrating changes as suggested by fernandomg
* with updates from Herman and Esteban.
* Use selector for state.metamask.accounts in all cases.
* Default to cached balance when selecting metamask accounts
* Adds the cached-balances controller
* Documentation and small codes fixes for #5843
Co-Authored-By: danjm <danjm.com@gmail.com>
* Fixed Vivek's bug
Fixes#5850
What was happening:
It seems that his MetaMask had crashed while some new transactions had
been loading defaults. He probably had a network connectivity issue to
Infura (which we are working with Infura to address).
As a result of this network cutout, his three unapproved transactions
were not marked failed, and were not marked as `loadingDefaults =
false`, as their gas prices had not yet been estimated.
Normally this behavior is supposed to clean itself up when the
transaction controller starts up, via the
`TransactionController._onBootCleanUp()` function, but in this case,
during unlock, that function was unable to do its job because when it
requested the transaction list, the current network was in the `loading`
state, making it proceed as if there were no pending transactions.
To fix this, I am doing two things:
- Setting transactions to loadingDefaults = false in more catch blocks.
- Calling `onBootCleanUp()` when the network store's status changes, so
that it will re-trigger when loading completes.
* Fixed reference
* Fixed infinite loop bug
Was refreshing the tx list on every tx state change instead of just
network changes, creating an infinite loop.
* Add notes to tx updates to clarify logs
* Auto fail transactions that have been approved for over 12 hours
Converts txs using a migration.
This migration uses a new helper function that generates tx-failing
migrations, and only requires a version, error message, and condition to
run on each transaction.
* Linted
* Only migrate approved txs to failed
* Cleanup
* Cleanup
* Small lint fixes
* transactions - use safe-event-emitter over events
* tests - pass a platform object on init with a noop showTransactionNotification
* test - fix for tx-state-history-helper trying to reduce an empty array
* deps - safe-event-emitter
* lint
* Add beginning of test
* Resubmit approved transactions on new block
May fix#4343 and related issues, where an error could leave
transactions stranded in the approved state.
* Remove unused test
* Re-approve transactions when retrying approved
* Add retry approved test
* Include approved in pending tx count
* Fix getPendingTxs()
* Linted
* Only throw hash error in submitted state
* Only check submitted txs for block inclusion
* Fix test expectations
* Parameterize NetworkDisplay background colour
* Update design for login request screen
* Pass siteTitle, siteImage through for calls to ethereum.enable()
* Bring the site images closer together
Fixes#4250 (#5559)
* Added localized names for languages
* Capital letter for Čeština
* capital letter Русский
* i18n - use localized names in language selection
* fix build
* package-lock.json build fix
* added drizzle app for testing
* working
* clean up
* clean up script
* make build step required
* add drizzle-tests to .eslintignore
* clean up drizzle run script
* lint
* use truffle unbox
* undo eslintignore changes
* revert change
* dont use global
* dont need this steps
* use the new account flow
* restore package-lock.json
* french locales: fix typos and improve wording
* french locales: more fixes and rewording
* fixed typo
* fixed typo
* added missing translations
* fixed alphabetical order
* fixed alphabetical order
* added missing translations for FR
* fixed verify-locale-strings.js
* fixed indentation
* fixed indentation
* updated french locale
* updated changelog with changes logs
* a few fixes after receiving comments, mostly Caps removing and adding
* translated 2 missing french locale words and also remove a caps
* Update messages.json
* Update messages.json
* french locales: fix typos and improve wording
* french locales: more fixes and rewording
* fixed typo
* fixed typo
* added missing translations
* fixed alphabetical order
* fixed alphabetical order
* added missing translations for FR
* fixed verify-locale-strings.js
* fixed indentation
* fixed indentation
* updated french locale
* updated changelog with changes logs
* a few fixes after receiving comments, mostly Caps removing and adding
* Increase suggested gas percentile to 65
I keep submitting transactions then waiting a long time. Apparently 50th percentile isn't enough.
* Update test for getGasPrice
Noticed the implementation used the old Ledger logo. Simply replaced the .svg without testing, so hope someone can test the extension before merging 😄 .
According to the current implementation any domain ending in .eth or .test will try to resolve through ENS even if the DNS is able to resolve it.
changing `onBeforeRequest` to `onErrorOccurred` will only resolve those .eth or .test domains that the DNS is not able to resolve.
Fixes#4462
Ensures that resetAccount() can work on non-stock providers.
I'm unclear how this was ever working, this code hasn't moved in months,
but users report it recently breaking. Maybe we only recently pushed it
to prod.
Previously importing an empty string would result in a new empty Keyring
object to be constructed, with no notification to the user.
Now we render a clear error explaining the mistake.
Addresses #4475, where entries in the identities object do not
necessarily have corresponding accounts in the vault.
On password submission, this change passes known accounts to the
preferencesController (responsible for nickname management), and removes
unknown entries.
Includes "TODO" notes for where we could log the issue to sentry or
notify the user.
