* using the aggregators from tokenList instead of detectedToken to avoid conflicts between static and dynamic list
* removing aggregator from the detectTokens object List
A patch made in #15672 was found to be unnecessary. Instead of setting
a `rootGlobals` object upon construction of the root compartment, we
are now creating a `sentryHooks` object in the initial top-level
compartment. I hadn't realized at the time that the root compartment
would inherit all properties of the initial compartment `globalThis`.
This accomplishes the same goals as #15672 except without needing a
patch.
The Sentry `Dedupe` integration has been filtering out our events, even
when they were never sent due to our `beforeSend` handler. It was
wrongly identifying them as duplicates because it has no knowledge of
`beforeSend` or whether they were actually sent or not.
To resolve this, the filtering we were doing in `beforeSend` has been
moved to a Sentry integration. This integration is installed ahead of
the `Dedupe` integration, so `Dedupe` should never find out about any
events that we filter out, and thus will never consider them as sent
when they were not.
Our Sentry setup relies upon application state, but it wasn't able to
access it in LavaMoat builds because it's running in a separate
Compartment.
A patch has been introduced to the LavaMoat runtime to allow the root
Compartment to mutate the `rootGlobals` object, which is accessible
from outside the compartment as well. This lets us expose application
state to our Sentry integration.
* addding the legacy tokenlist, tuning token detection OFF by default, adding new message while importing tokens
updating the controller version and calling detectNewToken on network change
fixing rebase error
Run yarn lavamoat:auto for updating policies
updating lavamoat
Deleted node modules and run again lavamoat auto
fixing rebase issues
updating lavamoat policies
updating lavamoat after rebasing
policies
updating custom token warning and blocking detectedtoken link when tpken detection is off for supported networks
to update the token in fetchTosync
updating the contract map object
Revert build-system lavamoat policy changes
Move token list selection logic from components to getTokenList selector
updating the tokenList
Update lavamoat
Fix error
updating lavamoat
lint fix
fix unit test fail
fix unit test fail
lint fix
fixing rebase locale error
rebase fix
Revert build-system policy changes
temp
addressing review comments
* rebase fix
* Backup user data
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
Tests for prependZero (utils.js)
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
Fix advancedtab test
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
backup controller tests
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
Lint fixes
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
Backup controller don't have a store.
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
Restore from file.
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
Advanced Tab tests
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
Lint fix
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
e2e tests for backup
unit tests for restore.
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
Fix comments on PR.
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
restore style
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
Lint fixes
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
We should move the exportAsFile to a utility file in the shared/ directory
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
Move export as file to shared folder
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
Refactor create download folder methods
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
Lint fixes.
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
Move the backup/restore buttons closer to 3box
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
Change descriptions
Add to search
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
refactor code to use if instead of &&
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
Lint fixes
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
Restore button should change cursor to pointer.
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
Fix restore not uploading same file twice.
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
Do not backup these items in preferences
identities
lostIdentities
selectedAddress
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
lint fixes.
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
* Only update what is needed.
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
* Fixed test for search
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
* remove txError as it currently does nothing.
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
* Remove dispatch, not needed since we're not dispatching any actions.
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
* Event should be title case.
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
* Make backup/restore normal async functions
rename event as per product suggestion.
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
* Use success Actionable message for success message and danger for error
message
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
* change event name to match with backup
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
* Lint fixes
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
* lint fixes
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
* fix e2e
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
Two comments have been added to reference a longer explanation of what
the legacy provider streams are, why we still have them, and why we
want to remove them.
* Fix "app-init" injection
The way we were injecting variables into the `app-init.js` bundle was
accidentally overwriting the bundle output with the raw `app-init.js`
source file. This is a problem because the bundling process handles a
lot of things we care about like source maps, polyfills and other
necessary Babel transformations, environment variable injection, and
minification.
Instead of using string replacement to inject variables, we are now
using environment variables. The old string replacement strategy has
been removed, and the `app-init.js` module is now generated using the
same process as our other bundles.
A new option, "extraEnvironmentVariables", was added to allow us to
inject environment variables specifically for this bundle.
* Add check to ensure APPLY_LAVAMOAT is set
* Stop throwing an error when adding gas defaults for a simple send, that has data, to an address without a response code
* Lint fix
* fixup lint
Co-authored-by: brad-decker <bhdecker84@gmail.com>
* remove decentralized 4byte function signature registry since it is griefed and we can't algorithmically check for best option when 4byte is down
* add migration
* remove nock of on chain registry call in getMethodDataAsync test
* Don't send errors to sentry if users have not opted-in to participate in metametrics
* Don't capture opt-out metrics
* Move the metrics-opt in screen to immediately after the welcome screen
* Ensure that global.getSentryState is set in the background
* Fix e2e tests after rearranging onboardin flow
* Fix unit tests
* More e2e test fixes
* Remove unnecessary wrappers around capture exception
* Ensure that editing a transaction from a transfer to a simple send properly resets data and updates type
* Handle case where there are no unapproved txes
* Improve comment in updateSendAsset
* Remove unnecessary code in send transaction edit function
* Fix
* Ensure hex data is properly reset when changing from a safe transfer from tx to native send
* set more appropriate default for ticker symbol when wallet_addEthereumChain is called
* throw error to dapp when site suggests network with same chainId but different ticker symbol from already added network, instead of showing error and disabled notification to user
Renames the `MetaMaskController.workerController` property to `snapExecutionService`, which better matches the naming scheme used throughout the Snaps codebase. No functional changes.
* Increase likelyhood of valid method signatures being returned by getMethodData
* Update coverage
* Update coverage
* Update coverage
* add a migration to clear knownMethodData
* Small typo changes
Co-authored-by: Alex <adonesky@gmail.com>
* Only have timeout for when payload is getState
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
* Fix test
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
* we should not call normalize if we're failing the transaction
refactor out update history
we should fail if un update we get an error and the warning message is
error submitting.
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
* refactor _setTransactionStatus
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
* add function to check if url is localhost
* allow localhost rpcUrls in `wallet_addEthereumChain`
* allow localhost blockExplorerUrls
* wrap new URL in try/catch
* Return an estimated amount for a completed swap if an RPC provider has a delay
* Create a recursive function for updating post tx balance
* Add a few tests for the "getSwapsTokensReceivedFromTxMeta" fn
* Trigger Build
* When background port closes, UI should display a user friendly error.
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
Remove console.log
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
A couple of fixes
1. Use timeout in metaRPCClientFactory to check if UI can't
communicate with bg
2. Refactor locale setup
3. Fixed wording/capitalization
4. Fix locales usage so that linting works
5. Refactor CSS
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
do not simulate errorwq
Refactor loading css
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
Remove the onDisconnect event handler in ui as this is handled in
metarpcclientfactory
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
Do not throw in bg
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
Fix PR comments
Remove unused message 'failedToLoadMessage'
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
Move usage of locales to shared/** so that linter can see it.
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
Do not simulate error.
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
metarpc can handle multiple requests, responseHandled should be a map.
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
reload metamask button on critical error
Use metamask state (if available) to the locale, else read locale files
manually.
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
use constant and numeric separator
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
refactor error utils
remove error simulation
Memoize setupLocale function
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
test cases
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
Do not simulate error
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
1. store should be metamask state
2. code refactorings.
Tests: mock setupLocale
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
Mock fetchLocale instead
Test setup locale
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
UI/CSS changes.
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
Do not simulate failure
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
* spell MetaMask correctly
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
* Rename state to mockStore
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
* we should clean up this.responseHandled[id] in the error case.
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
* Fixed PR comments.
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
* clean up response handled.
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
* origin/develop: (131 commits)
Update `protobufjs` and remove obsolete advisory exclusion (#14841)
Include snap version in pill (#14803)
Update PULL_REQUEST_TEMPLATE.md (#14790)
fix: keystone transaction qrcode has no white spacing (#14798)
Snap notifications integration (#14605)
Upgrade @metamask/eth-ledger-bridge-keyring (#14799)
snaps-skunkworks@0.15.0 (#14772)
Fix proptype errors in network dropdown, tx list item details, and account details modal tests (#14747)
Ensure transaction type is correctly updated on edit (#14721)
Add fiat onboarding for AVAX and MATIC through Wyre (#14683)
Bump @metamask/contract-metadata from 1.33.0 to 1.35.0 (#14791)
Slight cleanup of constants/transactions, useTransactionDisplayData, and TransactionIcon (#14784)
Migrate the "estimateGas" API call to "getFees" for STX (#14767)
Ignore advisory GHSA-wm7h-9275-46v2 (#14789)
Adding flag for MV3 (#14762)
Add types to send state (#14740)
Remove site origin on snap install (#14752)
Update design tokens library from 1.5 to 1.6 WIP (#14732)
Enables the "Safe Transaction From" copy for safeTransferFrom transactions (#14769)
remove draft transaction (#14701)
...
* origin/master: (101 commits)
Updating changelog
Add token standard to custom token details (#14506)
Revert "Dark Mode: What's New Announcement (#14346)"
Ensure network name in confirm page container is defined (#14520)
Updating lavamoat policies
Fix the alerts toggles in settings (#14498)
Disable swaps whenever the environment is not development or testing, so that behaviour follows production for QA purposes (#14499)
[skip e2e] Updating changelog for v10.14.0 (#14487)
Version v10.14.0
Docs - segment metrics (#14435)
Add snaps view search (#14419)
Run main, flask and beta in sequence in generate-lavamoat-policies.sh (#14470)
Modify import SRP page (#14425)
Dark Mode: Implement Metrics (#14455)
HoldToRevealButton component (#13785)
e2e test import json file as import account strategy (#14449)
MetaMetrics: Identify 'number_of_tokens' user trait (#14427)
MetaMetrics: Identify 'nft_autodetection_enabled' & 'opensea_api_enabled' (#14367)
Swaps: Sort "token_from" dropdown tokens by their fiat value first and "token_to" by top tokens (#14436)
Update segment instantiation check. Only check if SEGMENT_WRITE_KEY exists (#14407)
...
* updated state on edit
* Update transaction type in updateEditableParams method instead of in the send duck
* Fix unit test
* Fix unit tests
* Fix and improve unit tests
Co-authored-by: dragana8 <dragana.simic@consensys.net>
The phishing warning page URL environment variable has been renamed
from `PHISHING_PAGE_URL` to `PHISHING_WARNING_PAGE_URL`. We call this
page the "phishing warning page" everywhere else, and this name seemed
better suited (it's not a phishing page itself).
The variable has been listed and documented in `.metamaskrc.dist` as
well.
An externally hosted phishing warning page is now used rather than the
built-in phishing warning page.The phishing page warning URL is set via
configuration file or environment variable. The default URL is either
the expected production URL or `http://localhost:9999/` for e2e testing
environments.
The new external phishing page includes a design change when it is
loaded within an iframe. In that case it now shows a condensed message,
and prompts the user to open the full warning page in a new tab to see
more details or bypass the warning. This is to prevent a clickjacking
attack from safelisting a site without user consent.
The new external phishing page also includes a simple caching service
worker to ensure it continues to work offline (or if our hosting goes
offline), as long as the user has successfully loaded the page at least
once. We also load the page temporarily during the extension startup
process to trigger the service worker installation.
The old phishing page and all related lines have been removed. The
property `web_accessible_resources` has also been removed from the
manifest. The only entry apart from the phishing page was `inpage.js`,
and we don't need that to be web accessible anymore because we inject
the script inline into each page rather than loading the file directly.
New e2e tests have been added to cover more phishing warning page
functionality, including the "safelist" action and the "iframe" case.
* Update version parsing to allow rollback release
When we want to rollback a release on Chrome, sometimes we use the
fourth part of the version for the rollback release. This is because
the Chrome web stores does not directly allow rolling back, but instead
requires us to re-submit the release we want to roll back to with a
higher version number.
The manifest version parsing now allows for a fourth version part.
The comments have also been updated to be more descriptive, and to fix
a minor inaccuracy.
* Fix typo in comment
Co-authored-by: David Walsh <davidwalsh83@gmail.com>
Co-authored-by: David Walsh <davidwalsh83@gmail.com>
* Rename NotificationController to AnnouncementController
* Fix test
* Add test for missing NotificationController state
* Bump controllers
* Move test to correct file
* Rename config key
* Add migration 71 to list of migrations
* Fix selector after migration
* fix failed off chain tx mismatch with next confirmed transaction
* dont drop failed txs when tx in confirmed
* add comment for reassigning logic
* resolve change requests
We currently store the JSON-RPC request and response objects in the permission activity log. The utility of doing this was always rather dubious, but never problematic. Until now.
In Flask, as the restricted methods have expanded in number, user secrets may be included on JSON-RPC message objects. This PR removes these properties from the permission activity log, and adds a migration which does the same to existing log objects. We don't interact with the log objects anywhere in our codebase, but we don't want unexpected properties to cause errors in the future should any log objects be retained.
This PR also updates relevant tests and test data. It makes a minor functional change to how a request is designated as a success or failure, but this should not change any behavior in practice.
* MetaMetrics: identify number_of_tokens
* MetaMetrics: update number_of_tokens
do not filter by unique addresses.
Each token contract x chain id combo is a unique contract
* MetaMetrics: update MetaMetricsTraits @typedef
- add number_of_tokens
* MetaMetrics: clean up number_of_tokens
* MetaMetrics: alphabetize in test
* segment: instantiate w/out SEGMENT_HOST check
If SEGMENT_HOST is null, then the analytics-node library will usea defaulted host
* Segment: rm IN_TEST check for instantiation
* Add new user trait for 'Number of NFT collections'.
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
FIx JS DOC
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
Arrange TRAITS in alphabetical order
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
Unit Tests for allCollectibles traits tracking.
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
change cid to chainId
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
* invert condition
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
* jsdoc - alphabetical order
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
* change {string} to the literal {number_of_nft_collections}
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
* Optimize _getNumberOfNFTs
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
* Set up correct timer value for fetching new quotes
* Show red timer in Swaps if quotes fetching will happen in less than 10s (previously it was 30s)
* Fix a UI issue with the notification close button
* Make stx refresh rates optional, since not every network supports them
Certain build steps accidentally omitted the `version` variable. It has
now been restored to all steps, ensuring that all environment variables
are correctly injected into all bundles.
A check has been added to the Sentry setup module to ensure the release
is not omitted in the future.
Certain build steps accidentally omitted the `version` variable. It has
now been restored to all steps, ensuring that all environment variables
are correctly injected into all bundles.
A check has been added to the Sentry setup module to ensure the release
is not omitted in the future.
* Set up correct timer value for fetching new quotes
* Show red timer in Swaps if quotes fetching will happen in less than 10s (previously it was 30s)
* Fix a UI issue with the notification close button
* Make stx refresh rates optional, since not every network supports them
* origin/develop: (210 commits)
Dark Mode: Remove unwanted background for price quote (#14278)
Dark Mode: Fix colors in toggle button (#14280)
Ensure proper color for swaps edit link (#14273)
Dark Mode: Ensure actionable message button colors are the same color as previously (#14271)
Add token standard to Token Added event. (#14253)
Token Aggregators component for Tokens Detected page (#14157)
Ensure Metafox follows cursor on Fetching quotes screen (#14261)
TransactionsControllerTest: catch uncaught errors (#14196)
GasModalPageContainer story: convert knobs and actions to controls / args (#13516)
Show STX switch for wrapping / unwrapping (#14225)
Change over ImportToken stories to use controls instead of knobs, update props in stories (#14246)
Change over FeeCard stories to use controls instead of knobs, update props in stories (#13766)
Update What's new screen with Token Detection information (#14124)
Improvements for multi-layer fee UX (#13547)
metaMetricsEvent -> trackEvent (#14249)
E2e dapp interactions (#14149)
failing contract interaction e2e (#14227)
Removed metrics event (#14042)
Add TypeScript to the build system (#13489)
Build user traits object when metamask state changes (#14192)
...
An array of integers is now used to represent the SRP in three cases:
* In the import wallet flow, the UI uses it to pass the user-provided
SRP to the background (which converts the array to a buffer).
* In the create wallet flow, the UI uses it to retrieve the generated
SRP from the background.
* When persisting the wallet to state, the background uses it to
serialize the SRP.
Co-authored-by: Elliot Winkler <elliot.winkler@gmail.com>
* Draft methods to brak updateTransaction into smaller more targeted
methods.
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
* This is a combination of 76 commits.
normalize and validate tx params.
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
Method to normalize tx and check if it's unapproved.
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
Move the methods to controllers/transactions/index.js
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
Flesh out the methods to update transaction with custom notes.
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
enforce that only the properties for the specific methid can be updated via the method.
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
Test update gas fees
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
Update swap approval transaction
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
use lodash to remove undefined properties
update swap transaction tests
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
Updates transaction user settings.
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
Lint fixes.
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
Add more parameters to updateSwapTransaction
approvalTxId
estimatedBaseFee
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
Add Update Transaction Metrics
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
Update transaction gas fees actions.js
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
Lint fixes.
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
Update EIP 1559 Params.
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
Lint Fixes.
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
Documentations.
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
Remove metrics from this PR
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
Lint fixes: Removed unused variables
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
Add more params to updateTransactionGasFees.
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
Update eip1559 method to editableParams.
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
lint fixes.
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
Fix Mocha tests
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
add gasPrice to updateEditableParams
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
Remove duplicated Params in notes.
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
A few more tests to cover if
transaction status is not unapproved
transaction is passed more parameters than it requires.
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
Update Transaction Gas Fees.
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
Update gas fees in edit-gas-popover.
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
Remove metrics.
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
Update gas settings and user settings.
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
Lint fixes.
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
Fix unit tests.
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
Lint fixes.
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
Draft methods to brak updateTransaction into smaller more targeted
methods.
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
normalize and validate tx params.
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
Method to normalize tx and check if it's unapproved.
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
Move the methods to controllers/transactions/index.js
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
Flesh out the methods to update transaction with custom notes.
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
Test update gas fees
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
Update swap approval transaction
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
use lodash to remove undefined properties
update swap transaction tests
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
Updates transaction user settings.
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
Lint fixes.
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
Add Update Transaction Metrics
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
Update transaction gas fees actions.js
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
Lint fixes.
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
Update EIP 1559 Params.
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
Lint Fixes.
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
Documentations.
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
Remove metrics from this PR
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
Lint fixes: Removed unused variables
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
Add more params to updateTransactionGasFees.
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
Update eip1559 method to editableParams.
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
lint fixes.
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
Fix Mocha tests
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
add gasPrice to updateEditableParams
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
Remove duplicated Params in notes.
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
A few more tests to cover if
transaction status is not unapproved
transaction is passed more parameters than it requires.
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
Update Transaction Gas Fees.
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
Remove metrics.
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
Update gas settings and user settings.
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
Lint fixes.
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
Fix unit tests.
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
Lint fixes.
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
Remove dup;icated method from rebase.
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
unrelated change
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
Force re-run workflow
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
Lint fix
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
Do not hideLoading since we're not showing it.
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
UpdateTransaction should be renamed to updateGasFees
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
updateGasFees in gas-modal-page-container.
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
fix:
update previous gas params update method
add types to the jsdoc comments.
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
updateTransactionGasFees should have been updatePreviousGasParams
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
Previous gas fees can be updated for confirmed transactions.
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
add updatePreviousGasParams to mocked functions.
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
Lint fixes
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
* we need to await the first dispatch before we call the second
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
* update values to make tests pass
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
* More changes to make e2e pass
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
* Need to wait a bit after save for changes to take effect.
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
* Remove merge comments.
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
* Await one dispatch before calling another
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
* We don't need goHome anymore.
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
* Tests must use async...await syntax too since we have await in the
useTranasctionFunction
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
* Add delay after button click for values to update
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
* Wait a moment after clicking save for values to update
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
* Wait after clicking save...
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
* Merge update transaction gas fees and transaction user settings
Show loading indicator on edit gas popover
Fix tests.
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
* Lint fixes
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
* Fix JSDoc
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
* updatePreviousGasParams should also return updated transaction meta.
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
* Changed registryUrl for snaps only in firefox
Fixed getPlatform to only be imported into metamask-controller in flask
Removed snaps specific testrunner script and use run-all with a cli option
* Fixed flakey tests
* Removed unneeded await
* Added delay
* Fixed linting
* deprecate extensionizer for webextension-polyfill
* fix tests
* remove extensionizer
* fix browser windows api calls
* fix broken on firefox
* fix getAcceptLanguages call
* update more browser apis that are now promisified
* remove unnecessary console error ignoring in e2e tests
* fix issue where we show contract address as recipient when calling safe transfer method on erc721 or erc1155 contracts
* updates function name getTransactionData -> parseStandardTokenTransactionData, and adds documentation
* Initial native notification implementation
* Simplify implementation
* Implementation based on RateLimitController
* Update controllers package
* Add notification to permission list
* Wire up correctly
* Remove snap_notify from the exclusion list
* Added more info for EIP-712 schema errors
* Changed EthereumProviderError to EthereumRpcError
* Fixed error code to not be hardcoded for signTypedData
* Changed registryUrl for snaps only in firefox
Fixed getPlatform to only be imported into metamask-controller in flask
Removed snaps specific testrunner script and use run-all with a cli option
* Fixed flakey tests
* Removed unneeded await
* Added delay
* Fixed linting
* Draft methods to brak updateTransaction into smaller more targeted
methods.
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
* This is a combination of 52 commits.
normalize and validate tx params.
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
Method to normalize tx and check if it's unapproved.
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
Move the methods to controllers/transactions/index.js
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
Flesh out the methods to update transaction with custom notes.
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
Test update gas fees
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
use lodash to remove undefined properties
update swap transaction tests
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
Updates transaction user settings.
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
Lint fixes.
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
Add Update Transaction Metrics
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
Update transaction gas fees actions.js
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
Lint fixes.
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
Update EIP 1559 Params.
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
Lint Fixes.
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
Documentations.
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
Remove metrics from this PR
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
Lint fixes: Removed unused variables
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
Update swap approval transaction
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
1. updateSwapApprovalTransaction should have id as first parameter
2. updateSwapApprovalTransaction should not show loading indicator
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
update swap transaction.
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
Remove metrics code.
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
Add updateTransactionParams to actions.js updateXXX and return txData at
the end of updateXXX method
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
Fix swapApprovalTransaction update to use same return method as swap
update
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
Draft methods to brak updateTransaction into smaller more targeted
methods.
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
normalize and validate tx params.
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
Method to normalize tx and check if it's unapproved.
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
Move the methods to controllers/transactions/index.js
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
Flesh out the methods to update transaction with custom notes.
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
Test update gas fees
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
Update swap approval transaction
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
use lodash to remove undefined properties
update swap transaction tests
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
Lint fixes.
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
Add Update Transaction Metrics
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
Update transaction gas fees actions.js
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
Lint fixes.
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
Update EIP 1559 Params.
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
Lint Fixes.
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
Documentations.
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
Remove metrics from this PR
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
Lint fixes: Removed unused variables
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
Update swap approval transaction
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
1. updateSwapApprovalTransaction should have id as first parameter
2. updateSwapApprovalTransaction should not show loading indicator
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
update swap transaction.
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
Remove metrics code.
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
Add updateTransactionParams to actions.js updateXXX and return txData at
the end of updateXXX method
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
Fix swapApprovalTransaction update to use same return method as swap
update
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
Remove duplicate tests
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
Remove comments.
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
Do not hideLoading, since we're not showing it.
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
...approveTxMeta no longer needed here.
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
Remove estimated base fee from swap approval txs.
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
remove txTradeMeta from params
make sure rebase didn't mess up any code - first pass
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
Lint fixes
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
* make use of getTokenStandardAndDetails method exposed on assetsContractController to determine how to represent the contract being interacted with in token contract method calls
An array of integers is now used to represent the SRP in three cases:
* In the import wallet flow, the UI uses it to pass the user-provided
SRP to the background (which converts the array to a buffer).
* In the create wallet flow, the UI uses it to retrieve the generated
SRP from the background.
* When persisting the wallet to state, the background uses it to
serialize the SRP.
Co-authored-by: Elliot Winkler <elliot.winkler@gmail.com>
* Draft methods to brak updateTransaction into smaller more targeted
methods.
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
* normalize and validate tx params.
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
* Method to normalize tx and check if it's unapproved.
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
* Move the methods to controllers/transactions/index.js
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
* Flesh out the methods to update transaction with custom notes.
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
* Test update gas fees
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
* Update swap approval transaction
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
* use lodash to remove undefined properties
update swap transaction tests
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
* Updates transaction user settings.
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
* Lint fixes.
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
* Add Update Transaction Metrics
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
* Update transaction gas fees actions.js
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
* Lint fixes.
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
* Update EIP 1559 Params.
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
* Lint Fixes.
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
* Documentations.
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
* Remove metrics from this PR
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
* Lint fixes: Removed unused variables
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
* Add more params to updateTransactionGasFees.
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
* Update eip1559 method to editableParams.
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
* lint fixes.
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
* Fix Mocha tests
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
* add gasPrice to updateEditableParams
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
* Remove duplicated Params in notes.
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
* A few more tests to cover if
transaction status is not unapproved
transaction is passed more parameters than it requires.
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
* Update EIP1559 params.
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
* Remove metrics
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
* Add updateTransactionParams to actions.js updateXXX and return txData at the end of updateXXX method
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
* Lint fixes.
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
* change method name to update editable params.
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
* lint fixes.
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
* Editable params should pass in the txParams and not the full tx object
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
* Fix jest tests
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
* lint fixes.
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
* Do not hideLoading since we're not showing it.
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
* Proper JSDOCs comments.
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
* Remove gas settings from updateEditableParams since we already have a
dedicated gas update method.
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
* Fix duplicate codes from rebasing.
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
* Lint fixes.
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
* Draft methods to brak updateTransaction into smaller more targeted
methods.
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
* normalize and validate tx params.
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
* Method to normalize tx and check if it's unapproved.
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
* Move the methods to controllers/transactions/index.js
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
* Flesh out the methods to update transaction with custom notes.
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
* enforce that only the properties for the specific methid can be updated via the method.
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
* Rename calls to check transaction status.
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
* Test update gas fees
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
* Test update estimated base fee
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
* Update swap approval transaction
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
* use lodash to remove undefined properties
update swap transaction tests
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
* Updates transaction user settings.
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
* Lint fixes.
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
* Remove commented log lines
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
* Add more parameters to updateSwapTransaction
approvalTxId
estimatedBaseFee
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
* Fix documentation for updateSwapTransaction
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
* Add Update Transaction Metrics
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
* Update transaction gas fees actions.js
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
* Lint fixes.
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
* Update EIP 1559 Params.
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
* Lint Fixes.
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
* Documentations.
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
* Remove metrics from this PR
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
* Lint fixes: Removed unused variables
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
* Add more params to updateTransactionGasFees.
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
* Update eip1559 method to editableParams.
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
* lint fixes.
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
* Fix Mocha tests
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
* add gasPrice to updateEditableParams
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
* Remove duplicated Params in notes.
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
* A few more tests to cover if
transaction status is not unapproved
transaction is passed more parameters than it requires.
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
* Fix: Insufficient number of substitutions for key "stxSuccessDescription"
* Only calculate "approvalGas" if the "approvalNeeded" param is truthy in a quote
* "Swap from" has to be set to enable "Review Swap", set a default token for "Swap from"
* Fix: Unable to find value of key "undefined" for locale
* Use array destructuring
* Fix: Insufficient number of substitutions for key "stxSuccessDescription"
* Only calculate "approvalGas" if the "approvalNeeded" param is truthy in a quote
* "Swap from" has to be set to enable "Review Swap", set a default token for "Swap from"
* Fix: Unable to find value of key "undefined" for locale
* Use array destructuring
This PR adds `snaps` under Flask build flags to the extension. This branch is mostly equivalent to the current production version of Flask, excepting some bug fixes and tweaks.
Closes#11626
* Do not call `decimalToHex` for `minimumGasLimit`, which is already in hex
* Add `0x` prefix when returning a gas estimate
* Fix UTs
Co-authored-by: Dan J Miller <danjm.com@gmail.com>
ESLint rules have been added to enforce our JSDoc conventions. These
rules were introduced by updating `@metamask/eslint-config` to v9.
Some of the rules have been disabled because the effort to fix all lint
errors was too high. It might be easiest to enable these rules one
directory at a time, or one rule at a time.
Most of the changes in this PR were a result of running
`yarn lint:fix`. There were a handful of manual changes that seemed
obvious and simple to make. Anything beyond that and the rule was left
disabled.
The ESLint config for the extension explicitly includes support for
Prettier. However, this is already being provided by our global ESLint
config (`@metamask/eslint-config`). Therefore there is no need to
include it here. In fact, this is causing weird issues where the `curly`
option is getting overridden somehow. After this change, these syntaxes
are invalid:
``` javascript
if (foo) return;
```
``` javascript
if (foo) return 'bar';
```
* Prevent automatic rejection of confirmations
Confirmations are now only automatically rejected if a user explicitly
closes the notification window. If we close the window programmatically
because there are no notifications left to show, nothing gets rejected.
This partially avoids a race condition where a confirmation gets
rejected automatically without the user having seen the confirmation
first. This could happen if the confirmation was processed just as the
notification window was being closed.
It's still possible for a confirmation that the user has never seen to
get rejected as a result of the user closing the window. But at least
now it's no longer possible for a confirmation to get rejected in this
manner after the user resolves the last confirmation in the queue.
* Fix bug that prevented automatic closure detection
All windows were being detected as explicit window closures,
essentially just as they were previously, because this variable was
cleared too soon.
* Re-open popup when necessary
After the window is automatically closed, a confirmation may have been
queued up while the window was closing. If so, the popup is now re-
opened.
Adds a missing middleware hook for `wallet_requestPermissions` that we failed to add in #12243. Also adds a runtime check that throws an error if any expected hooks are not provided to `createMethodMiddleware`.
Co-authored-by: Mark Stacey <markjstacey@gmail.com>
The Firefox extension version format does not support the version
format we use (SemVer), so we have to specially format the extension
version to be compatible. The format we chose was
`[major].[minor].[patch].[buildType][buildVersion]`. But when we tried
to submit a build with a version in that format, it was rejected as
invalid for unknown reasons.
The Firefox extension format has been updated to
`[major].[minor].[patch][buildType][buildVersion]`. This seems to pass
validation.
The `version_name` manifest field was being used on Chrome to store the
build type. However, Chrome intended this field to be a full
representation of the version, for display purposes. This was evident
when uploading this version to the Chrome Web Store, because it used
`flask` as the entire version.
Instead the `version_name` field now includes the full SemVer version
string. The version parsing code within the build script and in the
wallet itself have been updated accordingly.
The `environment` field we use for Sentry includes the build type for
all build types except `main`, but the log message indicating that
Sentry did not include this. This log message is useful for ensuring
that Sentry is setup correctly, so it should display the same
environment that Sentry is using. It has been updated to do just that.
* added wrapper around account list to prevent storybook from collapsing the list
* updated translation files
* added snap-connect page
* refactored account list out of the choose account component
* fixed width
* removed unnecessary scss from choose-account component, fixed props in choose account story
* removed snaps-connect page, added comments to ChooseAccount
* updated choose account subtitle text, updated styling for title & subtitle, removed redundant account list story
* updated component name, updated paths
* fixed linter errors
* added comments
* removed unused message
* removed selectAccounts key from all locales
* updated class name for account list header, updated allAreSelected function to use length checks
* Revert "removed unused message"
This reverts commit 32771bc83c08f120825ef75f0741f3034e7dbecb.
* Revert "removed selectAccounts key from all locales"
This reverts commit ccfa4a860f9a75693d893d7c404384e719de297e.
* updated locale messages to use selectAccounts key
* removed stray import
* updated scss
* updated translation key
* removed chooseAccounts key from en locale
* removed optional chaining
* changes
* updated subjectMetadata
* updated subject types
* update useOriginMetadata function to include unknown subject type
* updated permission connect header props, removed host and added subjectType to targetSubjectMetadata
* added subjectType to targetSubjectMetadata
* removed console.log
* changed prop name to iconUrl
The ESLint config has been updated to v8. The breaking changes are:
* The Prettier rule `quoteProps` has been changed from `consistent` to
`as-needed`, meaning that if one key requires quoting, only that key is
quoted rather than all keys.
* The ESLint rule `no-shadow` has been made more strict. It now
prevents globals from being shadowed as well.
Most of these changes were applied with `yarn lint:fix`. Only the
shadowing changes required manual fixing (shadowing variable names were
either replaced with destructuring or renamed).
The dependency `globalThis` was added to the list of dynamic
dependencies in the build system, where it should have been already.
This was causing `depcheck` to fail because the new lint rules required
removing the one place where `globalThis` had been erroneously imported
previously.
A rule requiring a newline between multiline blocks and expressions has
been disabled temporarily to make this PR smaller and to avoid
introducing conflicts with other PRs.
The `selectHooks` function has been replaced with the equivalent
function from the `@metamask/rpc-methods` package, which is
functionally equivalent.
The function was included in that package so that it could be used
elsewhere in the `snaps-skunkworks` repo. Eventually the goal is to
migrate much of our RPC logic into this package so that it can be
shared across products, and by our libraries as needed.
This PR introduces the concept of subject _types_ to be associated with each subject in the `SubjectMetadataController`, and used for control flow in our RPC stack (`setupProviderEngine` and so forth).
We already differentiate between "types" of subjects in various places on an ad hoc basis via boolean flags (e.g. `isInternal` in our RPC stack) or the presence/absence of certain values in the subject's metadata (specifically `metadata.extensionId`). The status quo is manageable if not ideal, but will start to become untenable with the introduction of Snaps in the near future.
Therefore, this PR establishes a `SUBJECT_TYPES` enum and adds the `subjectType` property to the metadata of each subject. A new migration is added to accomplish this. Finally, we specify and `INTERNAL` subject type to distinguish internal from external requests.
The `nodeify` utility is no longer needed for the background API.
Instead each method is assumed to be either synchronous or Promise-
returning.
The error handling was updated to at least log the error in the case
where a method fall fails after the connection is broken.
# Permission System 2.0
## Background
This PR migrates the extension permission system to [the new `PermissionController`](https://github.com/MetaMask/snaps-skunkworks/tree/main/packages/controllers/src/permissions).
The original permission system, based on [`rpc-cap`](https://github.com/MetaMask/rpc-cap), introduced [`ZCAP-LD`](https://w3c-ccg.github.io/zcap-ld/)-like permissions to our JSON-RPC stack.
We used it to [implement](https://github.com/MetaMask/metamask-extension/pull/7004) what we called "LoginPerSite" in [version 7.7.0](https://github.com/MetaMask/metamask-extension/releases/tag/v7.7.0) of the extension, which enabled the user to choose which accounts, if any, should be exposed to each dapp.
While that was a worthwhile feature in and of itself, we wanted a permission _system_ in order to enable everything we are going to with Snaps.
Unfortunately, the original permission system was difficult to use, and necessitated the creation of the original `PermissionsController` (note the "s"), which was more or less a wrapper for `rpc-cap`.
With this PR, we shake off the yoke of the original permission system, in favor of the modular, self-contained, ergonomic, and more mature permission system 2.0.
Note that [the `PermissionController` readme](https://github.com/MetaMask/snaps-skunkworks/tree/main/packages/controllers/src/permissions/README.md) explains how the new permission system works.
The `PermissionController` and `SubjectMetadataController` are currently shipped via `@metamask/snap-controllers`. This is a temporary state of affairs, and we'll move them to `@metamask/controllers` once they've landed in prod.
## Changes in Detail
First, the changes in this PR are not as big as they seem. Roughly half of the additions in this PR are fixtures in the test for the new migration (number 68), and a significant portion of the remaining ~2500 lines are due to find-and-replace changes in other test fixtures and UI files.
- The extension `PermissionsController` has been deleted, and completely replaced with the new `PermissionController` from [`@metamask/snap-controllers`](https://www.npmjs.com/package/@metamask/snap-controllers).
- The original `PermissionsController` "domain metadata" functionality is now managed by the new `SubjectMetadataController`, also from [`@metamask/snap-controllers`](https://www.npmjs.com/package/@metamask/snap-controllers).
- The permission activity and history log controller has been renamed `PermissionLogController` and has its own top-level state key, but is otherwise functionally equivalent to the existing implementation.
- Migration number 68 has been added to account for the new state changes.
- The tests in `app/scripts/controllers/permissions` have been migrated from `mocha` to `jest`.
Reviewers should focus their attention on the following files:
- `app/scripts/`
- `metamask-controller.js`
- This is where most of the integration work for the new `PermissionController` occurs.
Some functions that were internal to the original controller were moved here.
- `controllers/permissions/`
- `selectors.js`
- These selectors are for `ControllerMessenger` selector subscriptions. The actual subscriptions occur in `metamask-controller.js`. See the `ControllerMessenger` implementation for details.
- `specifications.js`
- The caveat and permission specifications are required by the new `PermissionController`, and are used to specify the `eth_accounts` permission and its JSON-RPC method implementation.
See the `PermissionController` readme for details.
- `migrations/068.js`
- The new state should be cross-referenced with the controllers that manage it.
The accompanying tests should also be thoroughly reviewed.
Some files may appear new but have just moved and/or been renamed:
- `app/scripts/lib/rpc-method-middleware/handlers/request-accounts.js`
- This was previously implemented in `controllers/permissions/permissionsMethodMiddleware.js`.
- `test/mocks/permissions.js`
- A truncated version of `test/mocks/permission-controller.js`.
Co-authored-by: Mark Stacey <markjstacey@gmail.com>
A propType error was showing up during e2e tests with a `testDev`
build. It was caused by `process.env.IN_TEST` being treated as a
boolean, when in fact it is either the string `'true'` or a boolean.
`IN_TEST` has been updated to always be a boolean. `loose-envify` has
no trouble injecting boolean values, so there's no reason to treat this
as a string.
