* Swaps: Show a network name dynamically in a tooltip
* Replace “Ethereum” with “$1”, change “Test” to “Testnet”
* Replace 이더리움 with $1
* Translate network names, use ‘Ethereum’ by default if a translation is not available yet
* Reorder messages to resolve ESLint issues
* Add a snapshot test for the FeeCard component, increase Jest threshold
* Enable snapshot testing into external .snap files in ESLint
* Add the “networkNameEthereum” key in ko/messages.json, remove default “Ethereum” value
* Throw an error if chain ID is not supported by the Swaps feature
* Use string literals when calling the `t` fn,
* Remove periodic calls to the /featureFlag API
* Always show the Swap button on the main page
* Check if the Swaps feature is enabled, show loading animation while waiting
* Reuse an existing useEffect call
* Use ‘isFeatureFlagLoaded’ in React’s state, resolve lint issues
* Add a watch mode for Jest testing
* Add unit tests for Swaps: fetchSwapsLiveness, add /ducks/swaps into Jest testing
* Remove Swaps Jest tests from Mocha’s ESLint rules
* Ignore Swaps Jest tests while running Mocha, update paths
* Increase test coverage to the current max
* Fix ESLint issues for Swaps
* Enable the Swaps feature by default and after state reset, remove loading screen before seeing Swaps
* Update Jest config, fix tests
* Update Jest coverage threshold to the current maximum
* Update ESLint rule in jest.config.js
* Disable the “Review Swap” button if the feature flag hasn’t loaded yet
* Update jest threshold
* origin/develop: (82 commits)
Add links to release headers (#10808)
Removing unnecessary params from withFixtures function call. (#10831)
Fix _getPermittedAccounts type safety (#10819)
Refactoring send-edit.spec.js to use fixtures (#10792)
Refactoring address-book.spec.js to use fixtures (#10804)
Update the changelog when creating an RC (#10795)
Update changelog headers and fix dates (#10805)
Add support for locators into driver abstraction (#10802)
remove node-sass dependency (#10797)
Add release header when updating changelog (#10794)
Ensure correct primary currency image is displayed on home screen and token list (#10777)
upgrade eslint deps (#10789)
only applies rules to the appropriate files (#10788)
Set the BSC_CONTRACT_ADDRESS to lowercase (#10800)
Prevent duplicate changelog entries (#10786)
Add changelog entries under release candidate header (#10784)
Remove script for creating master sync PR (#10791)
Remove date from changelog release header (#10790)
Remove useless negation (#10787)
Refactoring ethereum-on.spec.js to use fixtures (#10778)
...
* Replace logic for eth swap token in fetchQuotesAndSetQuoteState with getSwapsEthToken call (#10624)
* Move swaps constants to the shared constants directory (#10614)
* Fix: ETH 'token' now only appears once in the swaps to and from dropdowns. (#10650)
* Swaps support for local testnet (#10658)
* Swaps support for local testnet
* Create util method for comparison of token addresses/symbols to default swaps token
* Get chainId from txMeta in _trackSwapsMetrics of transaction controller
* Add comment to document purpose of getTransactionGroupRecipientAddressFilter
* Use isSwapsDefaultTokenSymbol in place of repeated defaultTokenSymbol comparisons in build-quote.js
* Additional swaps network support (#10721)
* Add swaps support for bnc chain
* Use single default token address in shared/constants/swaps
* Ensure swaps gas prices are fetched from the correct chain specific endpoint (#10744)
* Ensure swaps gas prices are fetched from the correct chain specific endpoint
* Just rely on fetchWithCache to cache swaps gas prices, instead of directly using storage in getSwapsPriceEstimatesLastRetrieved
* Empty commit
* update @metamask/etherscan-link to v2.0.0 (#10747)
* Use correct block explorer name and link in swaps when on custom network (#10743)
* Use correct block explorer name and link in swaps when on custom network.
* Fix up custom etherscan link code in build-quote.js
* Use blockExplorerUrl hostname instead of 'blockExplorerBaseUrl'
* Use correct etherscan-link method for token links in build-quote
* Create correct token link in build-quote for mainnet AND custom networks
* Block explorer url improvements in awaiting-swap.js and build-quote.js
* Use swapVerifyTokenExplanation message with substitutable block explorer for all applicable locales
* Ensure that block explorer links are not shown in awaiting-swap if no url is available
* Ensure that the correct default currency symbols are used for fees on the view quote screen (#10753)
* Updating y18n and netmask to resolve dependency issues (#10765)
netmask@1.0.6 -> 2.0.1, y18n@3.2.1 -> 3.2.2, y18n@4.0.0 -> 4.0.1
* Ensure that priceSlippage fiat amounts are always shown in view-quote.js (#10762)
* Ensure that the approval fee in the swaps custom gas modal is in network specific currency (#10763)
* Use network specific swaps contract address when checking swap contract token approval (#10774)
* Set the BSC_CONTRACT_ADDRESS to lowercase (#10800)
* Ensure correct primary currency image is displayed on home screen and token list (#10777)
* [skip e2e] Update changelog for v9.3.0 (#10740)
* Version v9.3.0
* [skip e2e] Update changelog for v9.3.0 (#10803)
Co-authored-by: Dan J Miller <danjm.com@gmail.com>
Co-authored-by: ryanml <ryanlanese@gmail.com>
Co-authored-by: David Walsh <davidwalsh83@gmail.com>
Co-authored-by: MetaMask Bot <metamaskbot@users.noreply.github.com>
* build - declare background as html
* build - fill in empty file when a missing file is expected
* lint - fix
* Update development/build/manifest.js
Co-authored-by: Mark Stacey <markjstacey@gmail.com>
* Update development/build/manifest.js
Co-authored-by: Mark Stacey <markjstacey@gmail.com>
Co-authored-by: Mark Stacey <markjstacey@gmail.com>
* Use correct block explorer name and link in swaps when on custom network.
* Fix up custom etherscan link code in build-quote.js
* Use blockExplorerUrl hostname instead of 'blockExplorerBaseUrl'
* Use correct etherscan-link method for token links in build-quote
* Create correct token link in build-quote for mainnet AND custom networks
* Block explorer url improvements in awaiting-swap.js and build-quote.js
* Use swapVerifyTokenExplanation message with substitutable block explorer for all applicable locales
* Ensure that block explorer links are not shown in awaiting-swap if no url is available
* origin/develop: (45 commits)
eth-block-tracker@5.0.1 (#10737)
Allow 11 characters in symbol for RPC (#10670)
security - update SES lockdown (#10663)
build - refactor build system for easier configuration (#10718)
ci - cache deps before patch-package (#10735)
Additional swaps network support (#10721)
Update @metamask/controllers to v6.2.1 (#10701)
Fix 10562 - Hide the suggested token pane when not on Mainnet or test network (#10702)
Fix mismatchedChain typo in custom network approval screen (#10723)
Fix 10706 - Prevent autocomplete from add token input (#10700)
fix: remove unused `metamask.rpcUrl` from redux state + fix tests to reflect that (#10714)
rule out empty string for symbol (#10712)
Removing hard references to 12 word seed phrases in copy (#10704)
Add MetaMask to list of BIP44 HD path examples (#10703)
resolve issue with missing template error (#10692)
Delete setupFetchDebugging.js (#10636)
Excluding sourcemaps comment in production builds (#10695)
deps - remove "remotedev-server" (#10687)
Adding default properties to NetworkForm (#10682)
make migration more safe (#10689)
...
* update ses
* build - reference ses directly
* deps - unify regenerator-runtime versions on 0.13.7
* patches - apply regenerator-runtime ses compat patch\nhttps://github.com/facebook/regenerator/pull/411
* patches - patch regenerator-runtime for latest ses fix
* reduc patch, new lockdown severe override taming
* updated redux patch
* update redux patch for production
* ignore lockdown in lint
* deps - bump patch-package just in case
* trailing comma
* remove ses as dep
* fix path for frozen promise
* remove js extension in lockdown require
* Revert "ignore lockdown in lint"
This reverts commit 8cefdc94dd25d7781bb09eed8af36441397676da.
* Revert "build - reference ses directly"
This reverts commit 30371a377dcdd781c1bf9abe55e9c8ae34da26b5.
* deps - update ses
* Revert "fix path for frozen promise"
This reverts commit 966e4c60921a25befe8ca8dea58313cc25852f72.
Co-authored-by: kumavis <aaron@kumavis.me>
* Swaps support for local testnet
* Create util method for comparison of token addresses/symbols to default swaps token
* Get chainId from txMeta in _trackSwapsMetrics of transaction controller
* Add comment to document purpose of getTransactionGroupRecipientAddressFilter
* Use isSwapsDefaultTokenSymbol in place of repeated defaultTokenSymbol comparisons in build-quote.js
* origin/develop:
Position the 3dot menu in the same spot on asset screen and home screen (#10642)
Move swaps constants to the shared constants directory (#10614)
prefer chainId over networkId in most cases (#10594)
no more node:console (#10640)
fix: speedup cancellation (#10579)
Setting balance to 0x0 when the original value is undefined (#10634)
Hide zero balance tokens at useTokenTracker layer (#10630)
Removing double click bug from delete custom network modal (#10628)
remove transactionCategory in favor of more types (#10615)
Ensure permission log will only store JSON-able data (#10524)
Replace logic for eth swap token in fetchQuotesAndSetQuoteState with getSwapsEthToken call (#10624)
add trezor HD path for ledger wallets (#10616)
In #10510 we changed how tokens are stored, keying them by `chainId`
rather than network type. However we didn't update our mobile sync
function to account for this, which ended up breaking the filtering
logic used to prepare the data that is synced.
Specifically, custom tokens added by users are filtered out to just
those that are confirmed to be ERC20 tokens in our built-in list of
tokens. This filters out unrecognized tokens and NFTs.
The filtering logic has been restored to the pre-#10510 behaviour.
* origin/develop:
Updating references to MetaMask support (#10563)
Remove dead code related to the selectedFromToken variable in swaps/index.js (#10570)
make lavamoat optional for dev mode (#10538)
Adding a warning when sending a token to its own contract address (#10546)
handle undefined network (#10560)
cache balances by chain id (#10545)
Fix/handle safe low undefined (#10561)
Remove unused `hasHexData` prop (#10529)
Resolving pull-ws to v3.3.2 (#10543)
Sync `master` with `develop` (#10540)
* Add warning system for 'confusable' ENS names (#9129)
Uses unicode.org's TR39 confusables.txt to display a warning when
'confusable' unicode points are detected.
Currently only the `AddRecipient` component has been updated, but the new
`Confusable` component could be used elsewhere
The new `unicode-confusables` dependency adds close to 100KB to the
bundle size, and around 30KB when gzipped.
Adds 'tag' prop to the tooltop-v2 component
Use $Red-500 for confusable ens warning
Lint Tooltip component
Update copy for confusing ENS domain warning.
* Fix prop type
Co-authored-by: Mark Stacey <markjstacey@gmail.com>
* Use the includeFailedTokens option with useTokenTracker in viewQuote
* Show appropriate error message if we do not have data on the balance of token on the view-quote screen
* Update app/_locales/en/messages.json
Co-authored-by: Mark Stacey <markjstacey@gmail.com>
Co-authored-by: Mark Stacey <markjstacey@gmail.com>
* Updating Spanish messages.json
* Updating Spanish (Latin America) messages.json
* More updates to Spanish messages.json
* More updates to Spanish (Latin America) messages.json
* Lint fixes
The message `swapGetQuotes` is no longer used, so it has been removed.
Additionally two descriptions were updated to be English. The
descriptions are not meant to be translated.
Co-authored-by: Fernando Sproviero <fernandospr@gmail.com>
* Faulty use of adjective instead of noun in Dutch
The word `imported` in Dutch has different forms for adjective, noun and verb usage. I removed two instances of the letter `e` that I noticed when using Metamask.
Line `166` might similarly be wrong, but I don't know where in the interface it is so didn't verify.
**Question for devs:** is the `description` key in English on purpose or is it use for for me to translate it?
* Another faulty usage of geimporteerde
The updates to `zh_CN` merged in #9388 were a fair bit behind the
`develop` branch, so they ended up introducing various lint failures
despite passing on CI on the PR.
The localized messages have been updated to include English
descriptions, and one extraneous message has been removed.
* Update standard swaps build quote screen token verification message
* Add actionable warning token verification message to swaps build quote screen
* Simplify swapTokenVerification translations
* Use original verifyThisTokenOn message instead of swapsConfirmTokenAddressOnEtherscan
* Restore verifyThisTokenOn message to hi locale
* Support type and the withRightButton option as parameters on the actionable message component
* Use 'continue' in place of swapPriceDifferenceAcknowledgementNoFiat message
* Use wrapperClassName property on infotooltip in actionable-message
* Remove unnecessary change
* Lint fix
* Update `ko` localized messages
These translations were provided by Lionbridge.
* Update `lockoutTimeTooGreat` message
* Update statements with bold 'Never'
The sentences did not make sense previously. They have been updated to
be grammatically correct and to emphasize the negation.
* Apply suggested change to 'swapNewQuoteIn'
* use @lavamoat/allow-scripts for package postinstall allow list
* dnode: set "weak" to false
Co-authored-by: kumavis <kumavis@users.noreply.github.com>
Co-authored-by: Erik Marks <25517051+rekmarks@users.noreply.github.com>
Fixes#10111
Determine if the msgParams/address for the newRequestEncryptionPublicKey is a ledger keyring via getKeyringForAccount and return a promise rejection.
Fixes#6071
The origin of the dapp that suggested signing has been added to the
signature request confirmation page. This only applies to `eth_sign`,
`personal_sign`, `eth_signTypedData`, and `eth_signTypedData_v1`. The
confirmation page for `eth_signTypedData_v3` and `eth_signTypedData_v4`
already featured the origin.
The localized message descriptions from the `en` locale have been
restored to all other locales. These descriptions are intended to help
translators understand the context for each message, and are not
intended to be translated.
* origin/develop: (29 commits)
Reset swaps routeState in navigateBackToBuildQuote (#10166)
Fix decrypt message confirmation UI crash (#10252)
Fix site metadata JSON-RPC handler (#10243)
Fix design system error constants (#10246)
Remove unused environment variables (#10234)
Update `yarn.lock` (#10241)
Update postMessage structure for TrezorConnect 8 (#10192)
Increase minimum Firefox version to v68 (#10195)
Bump socket.io from 2.2.0 to 2.4.1 (#10232)
Update `@reduxjs/toolkit` from v1.3.2 to v1.5.0 (#10228)
eth-rpc-errors@4.0.2 (#10226)
Add MAX_SAFE_CHAIN_ID and refactor chain ID validation (#10224)
add chip component (#10199)
add new typography component (#10197)
@metamask/inpage-provider@8.0.3 (#10219)
Add NETWORK_TYPE_RPC constant (#10203)
Further improve organization of constants (#10200)
add includePaths to sass-loader in storybook (#10213)
Disable the swaps submit button after the first time it is clicked (#10162)
Remove default to 18 decimals in quotesToRenderableData method (#10212)
...
Firefox v68 is the _previous_ Extended Support Release. We are
increasing this because our current minimum version doesn't support
async iterators, so some of our dependencies cause the extension to
crash.
Our metrics show that usage of Firefox versions older than this is
quite low (under 0.7% of Firefox users in the past month). These older
versions are also _very behind_ on security updates. Using the Extended
Support Release also makes it easier for us to test the minimum
version, and ensure our extension remains compatible with it.
Relates to #6805
* origin/develop:
add new typography component (#10197)
@metamask/inpage-provider@8.0.3 (#10219)
Add NETWORK_TYPE_RPC constant (#10203)
Further improve organization of constants (#10200)
add includePaths to sass-loader in storybook (#10213)
Disable the swaps submit button after the first time it is clicked (#10162)
Remove default to 18 decimals in quotesToRenderableData method (#10212)
use dart sass, and update related modules (#10208)
Fetch with a timeout everywhere (#10101)
Make hiring link a link on text (#10206)
improve design system scss (#10193)
zh_TW: Translate buy, assets, activity (#10207)
Update TW term 乙太 -> 以太 (#10191)
Fix hardware account selection (#10198)
Add hiring note to the README (#10190)
drop the fox in about (#10174)
This restores support for versions of the inpage provider prior to v8.
This is intended to support dapps and extensions that directly
instantiated their own provider rather than using the injected
provider.
* Forward traffic between old and new provider streams
* Ignore publicConfig stream for non-legacy muxes
* Transform accountsChanged notification for legacy streams
* Convert publicConfigStore to singleton
Co-authored-by: Mark Stacey <markjstacey@gmail.com>
* Migration 51: ensure chainId is set in network controller provider state for all infura/default networks
* Clean up
* Migrate incorrect as well as falsy chainIds
Co-authored-by: Erik Marks <rekmarks@protonmail.com>
Our automatic token detection was hard-coded to only work on our built-
in Infura Mainnet endpoint. It now works with custom Mainnet RPC
endpoints as well.
Relates to #6992
* origin/develop: (66 commits)
Disable swaps based on chainId, instead of network id (#10155)
improve handling of last selected provider (#10093)
Add links to Community Forum to README (#10152)
@metamask/contract-metadata@1.21.0 (#10142)
Prevent malformed next nonce warning (#10143)
add module resolution for node-analytics/axios (#10139)
Ensure that gas for swap tx submitted at same time as approval is in hex (#10135)
Fix useTransactionDisplayData unit tests (#10134)
Fix network settings Kovan block explorer link (#10117)
Use destructured signal (#10115)
throw a new wrapped error instead of default one from segment (#10118)
@metamask/contract-metadata@1.20.0 (#10116)
Use late-bound noop function when disabling console (#10110)
Bump @metamask/contract-metadata from 1.19.0 to 1.20.0 (#10104)
Remove unnecessary swaps footer space when in dropdown mode (#10100)
Tighten up loading indication logic (#10103)
Skip reporting of successive persistence failures (#10099)
Update `@metamask/controllers` to v5.1.0 (#10096)
@metamask/obs-store@5.0.0 (#10092)
set last provider when switching to a customRPC (#10084)
...
* origin/develop: (60 commits)
Ensure that gas for swap tx submitted at same time as approval is in hex (#10135)
Fix useTransactionDisplayData unit tests (#10134)
Fix network settings Kovan block explorer link (#10117)
Use destructured signal (#10115)
throw a new wrapped error instead of default one from segment (#10118)
@metamask/contract-metadata@1.20.0 (#10116)
Use late-bound noop function when disabling console (#10110)
Bump @metamask/contract-metadata from 1.19.0 to 1.20.0 (#10104)
Remove unnecessary swaps footer space when in dropdown mode (#10100)
Tighten up loading indication logic (#10103)
Skip reporting of successive persistence failures (#10099)
Update `@metamask/controllers` to v5.1.0 (#10096)
@metamask/obs-store@5.0.0 (#10092)
set last provider when switching to a customRPC (#10084)
Fetch swap quote refresh time from API (#10069)
Fix `fetch-with-cache` handling of interwoven requests (#10079)
Fix 9874 - Improve gas maximum estimation (#10043)
Add eth_getProof to safe methods (#10070)
fix metametrics option tracking (#10071)
Disable console in contentscript (#10040)
...
The `disable-console` script introduced in #10040 used an arrow-
function no-op function to replace `console.log` and `console.info`.
This replacement function was early-bound to the `this` context of the
`disable-console` script, because that's how arrow functions work.
This violates an assumption baked into Sentry, which also replaces the
`console` functions. It wraps them in a function it uses to track
console logs as breadcrumbs. This wrapper function blows up for some
reason if the "original" `console` function is early-bound to a `this`
value of `undefined`.
This resulted in various UI freezes. One example is during onboarding,
when using Firefox with Enhanced Tracking Protection set in "strict"
mode. After submitting a password in the 'Create wallet' flow, the
Sentry `console` wrapper would throw and leave the user stuck on the
loading screen.
By replacing the no-op arrow function with a no-op function
declaration, the problem has been resolved.
Relates to #10097
The `disable-console` script introduced in #10040 used an arrow-
function no-op function to replace `console.log` and `console.info`.
This replacement function was early-bound to the `this` context of the
`disable-console` script, because that's how arrow functions work.
This violates an assumption baked into Sentry, which also replaces the
`console` functions. It wraps them in a function it uses to track
console logs as breadcrumbs. This wrapper function blows up for some
reason if the "original" `console` function is early-bound to a `this`
value of `undefined`.
This resulted in various UI freezes. One example is during onboarding,
when using Firefox with Enhanced Tracking Protection set in "strict"
mode. After submitting a password in the 'Create wallet' flow, the
Sentry `console` wrapper would throw and leave the user stuck on the
loading screen.
By replacing the no-op arrow function with a no-op function
declaration, the problem has been resolved.
Relates to #10097
Failure to persist state will now only report to Sentry if the last
attempt to save state succeeded. This ensures that if anyone is stuck
in a state where state can't be saved (e.g. low disk space), we aren't
flooded with repeated errors on Sentry.
Failure to persist state will now only report to Sentry if the last
attempt to save state succeeded. This ensures that if anyone is stuck
in a state where state can't be saved (e.g. low disk space), we aren't
flooded with repeated errors on Sentry.
This update comes with a breaking change to the Approval controller. It
now requires a `defaultApprovalType` parameter.
I don't think we have any use for a default approval type, but I've
added a "NO_TYPE" one for now because it's a strict requirement. We
should consider making this parameter optional in the future, for cases
like this where it's not needed.
This update will hopefully address some caching issues we've been
seeing with our phishing configuration. See here for more details:
https://github.com/MetaMask/controllers/pull/297
* origin/develop: (46 commits)
Fetch swap quote refresh time from API (#10069)
Fix `fetch-with-cache` handling of interwoven requests (#10079)
Fix 9874 - Improve gas maximum estimation (#10043)
Add eth_getProof to safe methods (#10070)
fix metametrics option tracking (#10071)
Disable console in contentscript (#10040)
Use Boolean for filters (#10066)
Add approval controller (#9401)
Cache dependencies (#10065)
Bump ini from 1.3.5 to 1.3.7 (#10064)
Add HTML coverage report to MetaMask bot comment (#10061)
Remove coveralls (#10063)
Prevent metaMaskFee prop error in FeeCard (#10047)
Display boolean values when signing typed data (#10048)
Use CircleCI executors to simplify CI config (#10055)
Use `.zip` for Firefox e2e tests (#10056)
Update `selenium-webdriver` and `geckodriver` (#10057)
Update Firefox version used on CI for e2e tests (#10058)
Add web3 shim usage notification (#10039)
Refactor home notification (#10046)
...
`eth_getProof` is an unpermissioned, read-only RPC method for getting account-related Merkle proofs, specified here: https://eips.ethereum.org/EIPS/eip-1186
It's been supported by major Ethereum clients, and Infura, for some time. By adding it to the safe methods list, we enable this method for our users.
* Maintain console logging in dev mode
Co-authored-by: kumavis <aaron@kumavis.me>
Co-authored-by: Erik Marks <rekmarks@protonmail.com>
Co-authored-by: Mark Stacey <markjstacey@gmail.com>
On Firefox 56 and Waterfox Classic, our `runLockdown.js` script throws
an error. This is fine on the HTML pages, as the next script tags still
get run without issue (though they don't benefit from the SES lockdown
sadly). But in the `contentscript`, an exception thrown here appears to
halt the execution of subsequent scripts.
To prevent the `contentscript` from crashing completely, lockdown
errors are now caught and logged. They are also logged to Sentry on the
pages where Sentry is setup.
`eth_getProof` is an unpermissioned, read-only RPC method for getting account-related Merkle proofs, specified here: https://eips.ethereum.org/EIPS/eip-1186
It's been supported by major Ethereum clients, and Infura, for some time. By adding it to the safe methods list, we enable this method for our users.
* Maintain console logging in dev mode
Co-authored-by: kumavis <aaron@kumavis.me>
Co-authored-by: Erik Marks <rekmarks@protonmail.com>
Co-authored-by: Mark Stacey <markjstacey@gmail.com>
This PR introduces the new approval controller to the extension codebase. We use it for the permissions controller's pending approval functionality.
The approval controller sets us up for a new pattern of requesting and managing user confirmations in RPC methods. Along with the generic RPC method middleware, the approval controller will allow us to eliminate our message managers, and decouple various method handlers from our provider stack, making the implementations more portable between the extension and mobile.
On Firefox 56 and Waterfox Classic, our `runLockdown.js` script throws
an error. This is fine on the HTML pages, as the next script tags still
get run without issue (though they don't benefit from the SES lockdown
sadly). But in the `contentscript`, an exception thrown here appears to
halt the execution of subsequent scripts.
To prevent the `contentscript` from crashing completely, lockdown
errors are now caught and logged. They are also logged to Sentry on the
pages where Sentry is setup.
The Chrome minimum version has been increased from v58 to v63. We found
that we had very few users on versions below v63, and v62 is
incompatible with our SES lockdown dependency.
This also makes us compatible with Object rest/spread syntax, so we
might not have to transpile that anymore. I'll revisit that separately.
When you load an extension `.zip` file in Firefox, it fails to load
scripts with the `.cjs` file extension. However, it works if you load
the extension via the `manifest.json` file instead.
After renaming the `lockdown.cjs` file to `lockdown.js`, it works in
Firefox in all cases, regardless whether it's loaded by manifest or by
`.zip`.
The new metrics controller has a `trackEvent` function that was being
called unbound, so `this` references were undefined. It is now bound
early in both places where it is passed in as a parameter.
The SES lockdown added in #9729 had the effect of obfuscating our error
messages. Any messages printed to the console would have the error
message replaced with the string "Error #" followed by a number. The
stack was also updated to point at `lockdown.cjs`, though the original
stack was preserved beneath the top stack frame.
Marking the `console` API as untamed seems to have fixed both issues.
The original error message is now printed to the console, along with
the original stack.
When the SES lockdown was added in #9729, the lockdown and the Sentry
initialization were migrated from the main bundle into separate
modules, which were run as separate `<script>` tags. These extra tags
were accidentally omitted for `home.html` and `notification.html`. As
a result Sentry was not initialized on these pages, so any errors
thrown on them would not be collected. They also do not benefit from
the SES lockdown.
The SES lockdown and Sentry initialization modules have been added to
both pages where they were missing.
When you load an extension `.zip` file in Firefox, it fails to load
scripts with the `.cjs` file extension. However, it works if you load
the extension via the `manifest.json` file instead.
After renaming the `lockdown.cjs` file to `lockdown.js`, it works in
Firefox in all cases, regardless whether it's loaded by manifest or by
`.zip`.
From a behavioral standpoint this PR fixes the issue with tracking, and persisting, tokens that the user hides. Whether we can/should optimize this to prevent duplicates of the accountHiddenTokens and hiddenToken is a point of contention, but it acts similiarly to how we track tokens and accountTokens.
Also to note, for tokens under a custom network there is no way to distinguish two different custom network sets of hidden tokens, they are all under the `rpc` property, same as accountTokens.
* @metamask/inpage-provider@^8.0.0
* Replace public config store with JSON-RPC notifications
* Encapsulate notification permissioning in permissions controller
* Update prefix of certain internal RPC methods and notifications
* Add accounts to getProviderState
* Send accounts with isUnlocked notification (#10007)
* Rename provider streams, notify provider of stream failures (#10006)
The new metrics controller has a `trackEvent` function that was being
called unbound, so `this` references were undefined. It is now bound
early in both places where it is passed in as a parameter.
The SES lockdown added in #9729 had the effect of obfuscating our error
messages. Any messages printed to the console would have the error
message replaced with the string "Error #" followed by a number. The
stack was also updated to point at `lockdown.cjs`, though the original
stack was preserved beneath the top stack frame.
Marking the `console` API as untamed seems to have fixed both issues.
The original error message is now printed to the console, along with
the original stack.
When the SES lockdown was added in #9729, the lockdown and the Sentry
initialization were migrated from the main bundle into separate
modules, which were run as separate `<script>` tags. These extra tags
were accidentally omitted for `home.html` and `notification.html`. As
a result Sentry was not initialized on these pages, so any errors
thrown on them would not be collected. They also do not benefit from
the SES lockdown.
The SES lockdown and Sentry initialization modules have been added to
both pages where they were missing.
* Migration to remove legacy local storage keys from localStorage
* Update app/scripts/migrations/050.js
Co-authored-by: Mark Stacey <markjstacey@gmail.com>
* Update app/scripts/migrations/050.js
Co-authored-by: Mark Stacey <markjstacey@gmail.com>
* Fix unit tests for migration 50
* Fixing stubbing and localstorage reference in migration 50
* Update test/helper.js
Co-authored-by: Mark Stacey <markjstacey@gmail.com>
Co-authored-by: Mark Stacey <markjstacey@gmail.com>
Attempts to send metrics would fail when no `options` were used. This
was because when the options parameter was not set, it was often sent
over our RPC connection as `undefined`, which gets serialized to `null`
when the message is converted to JSON. This `null` parameter didn't
trigger the default parameter set in the metametrics controller, as
default parameters are only used for `undefined`.
Instead the `options` parameter is now treated as fully optional, with
no default value set. The optional chaining operator is used to ensure
it won't blow up if it's not set. A fallback of `{}` was used for the
one destructure case as well.
If a `gasPrice` was specified in a transaction sent via a dapp, we
would include it in our `eth_estimateGas` call, causing it to fail if
the user had insufficient balance (for either the transaction amount or
the gas fee). This resulted in the fallback gas estimate being used;
the block gas limit. The block gas limit is quite a bit larger than
most transactions need, so this resulted in wildly inflated gas costs
being shown on our confirmation screen.
The `gasPrice` has been removed from the `txParams` object we pass to
`eth_estimateGas`, so now it won't perform any balance checks anymore.
This ensures that we'll get a valid gas estimate, as long as geth is
able to simulate the contract execution properly.
Fixes#9967
* Remove use of ethgassthat; use metaswap /gasPrices api for gas price estimates
* Remove references to ethgasstation
* Pass base to BigNumber constructor in fetchExternalBasicGasEstimates
* Update ui/app/hooks/useTokenTracker.js
Co-authored-by: Erik Marks <25517051+rekmarks@users.noreply.github.com>
* Delete gas price chart
* Remove price chart css import
* Delete additional fee chart code
* Lint fix
* Delete more code no longer used after ethgasstation removal
Co-authored-by: Erik Marks <25517051+rekmarks@users.noreply.github.com>
