Update NetworkController so that when it is creating the network client
based on configuration for a custom RPC endpoint, it verifies that the
configuration object contains both a chain ID and RPC URL. This check is
already present on the core side; bringing it over makes the tests more
consistent so we can compare them more easily.
This line was accidentally left in a previous PR that swapped Nock in
the NetworkController tests for a fake provider. It does not show up in
the core version of these tests.
This test for the `destroy` method in NetworkController uses `toBe` on
the core side because the use of `toBeTruthy` produces a lint warning
there. It doesn't here, but it's good to be consistent anyway so that
comparing the differences in NetworkController tests between this
extension and core is easier.
This controller action exists within the core version of
NetworkController. Although there are no plans to make use of this
action within the extension, it has accompanying tests. So ultimately,
the goal of this commit (like others) is to make it easier to compare
differences in the NetworkController tests between this repo and core
by adding a test for the `getProviderConfig` action.
* Add Snaps privacy warning on snap install
Add snap install warning status to storage
Add storybook
Add test for snap-privacy-warning
Resolve button type issue
Fix popup display logic
Update fixture
Update popup information and read more handling
Replace deprecated button
Update unit test
* Update buttons and add cancel flow
* Refactoring (review 1)
* Add more unit tests
In the `core` version of this controller, event types are not held in an
enum but are specified directly as strings instead.
Simplifying the event types will make it easier to compare the
NetworkController unit tests between extension and core.
This makes it possible to test that mock functions are called the
correct amount of times (otherwise Jest will think that a mock function
has been called for as many tests as exist in the NetworkController unit
test suite).
On the `core` side, the tests for `NetworkController.initializeProvider`
use the `lookupNetworkTests` to automatically test the `lookupNetwork`
behavior that `initializeProvider` initiates. This commit makes use of
the helper to bring the tests closer to the `core` version.
The NetworkController tests in the `core` repo use a `refreshNetwork`
test helper to exercise the behavior performed by various methods
when switching the network. This commit brings over this test helper and
refactors tests for those methods to use it.
import account without password
---------
Co-authored-by: Mike B <32695229+plasmacorral@users.noreply.github.com>
Co-authored-by: Gustavo Antunes <17601467+gantunesr@users.noreply.github.com>
Co-authored-by: Howard Braham <howrad@gmail.com>
* Added code fences to the following controllers: app-state, metametrics, preferences
* Fixed prettier
* Updated code to be align with new changes in MMI
* Changing code fences
* Remove uneeded files
* Fixed tests
* Fixed code fence
* Changing logic to use async/await
* Removed accountAddress
* Reverted code from develop
* Added code fences for account menu
* updates test and messages json
* clean up
* icons
* icons color correct
* icon size fix
* icon size fix
* adds mmi entries and updates to the new IconName
* clean up
* lint
* clean up
* prettier
* prettier
* camel case
---------
Co-authored-by: Antonio Regadas <antonio.regadas@consensys.net>
Co-authored-by: António Regadas <apregadas@gmail.com>
Hex and number responses from the `net_version` request are now
accepted. While most chains return decimal strings for this request,
some chains were returning hex responses instead and failing our
validation for this request (which was added in v10.30.0). This
resolves that problem.
Support for number responses was added because it likely worked in
older versions as well, so support is maintained to avoid similar
problems.
Fixes#19151
The `lookupNetwork` unit tests have been updated to expand test
coverage and match the unit tests for the core network controller. A
helper function `lookupNetworkTests` has been copied from core. It
covers most of the behavior of the function. Vidation tests and
functional tests not covered in core have been retained, but any tests
that are now redundant have been deleted.
Relates to #1197
The detection of the Infura "blocked" status has been updated to apply
only to built-in networks. The message we show to users in this state
is meant only for Infura; we don't want to show it for third-party RPC
APIs that happen to use the same error response.
This brings the network controller further in alignment with the core
network controller.
This isn't tested, but it was found in the course of porting unit tests
from core to extension. It will be covered by these tests, which will
be added in the next PR.
NetworkController doesn't handle `eth_subscribe` or `eth_unsubscribe`
specially, but as it's supported by Infura, we want to make sure we
exercise these RPC methods in the network client tests, even if it is
just to ensure that they get passed through to the network.
We had tests for these RPC methods, but they were commented out in
c095b1accd when the network client code
was extracted to a separate file. At the time we were considering adding
subscription- and filter-based middleware to NetworkController, and so
we commented out the tests for `eth_subscribe` and `eth_unsubscribe`
temporarily until we could rewrite them in a way that would exercise the
new middleware. We reverted that change in
bd23a49013, which meant that we could
restore the existing tests, but it appears that this task was not caught
during review. This commit takes care of restoring them.
Co-authored-by: legobeat <109787230+legobeat@users.noreply.github.com>
We now set the network status to "unknown" rather than "unavailable"
when the network ID is invalid. This better reflects what we know when
this happens, and it makes the network controller better aligned with
the core network controller.
This was accomplished by using a regular error for the network ID
assertion rather than using `assert` directly. `assert` would throw an
error with a `code` property, which resutled in us treating it like an
RPC error.
This isn't tested, but it was found in the course of porting unit tests
from core to extension. It will be covered by these tests, which will
be added in the next PR.
This change should have no functional impact because we treat these two
network statuses as equivalent. The distinction between unknown and
unavailable is useful only for debugging.
* added eth sign first step
* added modal
* added validation for form
* updated width with block
* added state trigger for toggle
* updated Eth sign modal text changes
* added eth sign toggle tex
* removed unnecessary code
* fixed form validation text
* updated eth toggle text
* added test
* added analytics
* updated design changes
* lint fix
* updated error text
* updated changes
* UX: Multichain: Implement Account Details Popover
* Styling account details popover
* using ButtonSecondary with variant, removing Text
* adding account-details jest test
* Close popover when outside area clicked
* Move all export functionality into the popover
* Improve jest tests
* Implement new design for export key screens
* Hide warning when popover is closed
* Vertically align the copy button
* Move AccountDetailsDisplay to its own file
* Move authentication to its own file
* Move private key to its own component
* Fix misalignment of avatar on display screen
* Move private key to its own component
* Update ui/components/multichain/account-details/account-details-authenticate.js
Co-authored-by: Nidhi Kumari <nidhi.kumari@consensys.net>
* Update ui/components/multichain/account-details/account-details.test.js
Co-authored-by: Nidhi Kumari <nidhi.kumari@consensys.net>
* Prevent account name overflow, update text size
* Use FormTextField
* Add analytics
* Move location of accountDetailsAddress
* Ensure passsword input is used
---------
Co-authored-by: Victor Thomas <10986371+vthomas13@users.noreply.github.com>
Co-authored-by: Nidhi Kumari <nidhi.kumari@consensys.net>
* Rename `provider` to `providerConfig`
The network controller `provider` state has been renamed to
`providerConfig`. This better reflects what this state is, and makes
this controller more closely aligned with the core network controller.
All references to the provider configuration have been updated to
prefer `providerConfig` over `provider`, to make the distinction clear
between a provider and provider config.
Closes#18902
* Add migration
* Simplify network controller unit test setup
The network controller unit tests have been refactored to simplify the
setup steps related to the controller messenger. The messenger is now
constructed by the `withController` helper function, rather than being
manually setup in each test that references it.
Relates to https://github.com/MetaMask/core/issues/1197
* Bring tests closer in alignment to core
The function to build default controller constructor parameters has
been removed, bringing these tests closer in alignment to the core
tests.
* feat: add yaml feature management
Add yaml feature file per build type.
Also add method to parse yaml and set
enabled features env to true. The build
process will then replace any process.env[feature]
that exists on the config by its value
* chore: add example for desktop
* Added initial draft of build features
* [TMP] Sync between computers
* Is able to succesfully build stable extension with snaps feature
* Removing var context from builds.yml
* Add asssets to builds.yml
* Minor bug fixes and removing debug logs
* [WIP] Test changes
* Removed TODOs
* Fix regession bug
Also
* remove debug logs
* merge Variables.set and Variables.setMany with an overload
* Fix build, lint and a bunch of issues
* Update LavaMoat policies
* Re-add desktop build type
* Fix some tests
* Fix desktop build
* Define some env variables used by MV3
* Fix lint
* Fix remove-fenced-code tests
* Fix README typo
* Move new code
* Fix missing asset copy
* Move Jest env setup
* Fix path for test after rebase
* Fix code fences
* Fix fencing and LavaMoat policies
* Fix MMI code-fencing after rebase
* Fix MMI code fencing after merge
* Fix more MMI code fencing
---------
Co-authored-by: cryptotavares <joao.tavares@consensys.net>
Co-authored-by: Frederik Bolding <frederik.bolding@gmail.com>
Co-authored-by: Brad Decker <bhdecker84@gmail.com>
* Add updated version of the Snaps list UI
Add more changes to match the designs of snaps list
Add next design iteration for snaps list
Update icons, sizes and pointer behaviour
Add redesign for snap settings page
Refactor and improve designs
Fix unit tests and refactor code
Fix e2e test
Fix lint
Update margin values
Add CSS override for connected sites list and update margins
Update paddings as requested
Fix vertical alignment of links
Fix tooltip position on the enable button
Add usage of getSnapName function for displaying snap names
Fix e2e tests and update date format for snap install date
Improve unit test for snap-settings-card
Change installation info logic
Update mocked state for snap
Add tests for ViewSnap component, refactor and update mocked state
Add check for version info
Change Snaps icon in Settings
Refactor Snaps list to use selector
Add handling in case of missing version history
* Fix icon ref
* Remove console logs
* Remove onClick from selector
* Add code fencing for imports in selectors.js
* switched to use banner alert and added story
* enabled dismiss functionality
* remove close button
* bump global branches coverage target
* replace Typography with Text and (link) Button with ButtonLink
* unit test for component rendering
* left-align button links to match text
* update copy to reflect figma mock ups
* update unit test snapshot
* bump coverage threshold
* update snapshot to reflect button component changes
* update snapshot to reflect box changes
In the core version of NetworkController, `setProviderType` sets
`rpcTarget` (its name for `rpcUrl`) and `nickname` to `undefined`.
While it would be better to completely remove these properties, it would
be better to follow suit so that we can make the tests between the two
versions of the controllers more alike.
* Use fake provider for NetworkController unit tests
In the unit tests for NetworkController, it's important to prevent
network requests from occurring. Currently we do that by using Nock.
However, the `core` version of NetworkController uses a fake provider
object. This is arguably a better approach for unit tests because it
prevents us from having to think about the behavior that a specific
middleware may have. For instance, the Infura middleware intercepts
`eth_chainId` to return a static result, and the block cache middleware
replaces the `latest` block tag with the latest block number, making an
extra call to `eth_blockNumber` in doing so. We have to account for
these kinds of behaviors when using Nock, but we do not need to do this
when using a fake provider.
This should make it easier to compare the difference between the unit
tests in this repo vs. in the `core` repo, which should ultimately help
us merge the two controllers together.
* Rename fake-provider-engine to fake-provider
* Rearrange imports
* Move fake-provider and fake-block-tracker into a directory and exclude it from coverage
* Make FakeBlockTracker inert, and fix JSDocs
* Remove generics from FakeProvider
* Call beforeCompleting (and beforeResolving) using async/await
* Fix signature of sendAsync; align other signatures within FakeProvider
* No need to check whether error is not a string
* Don't exclude the provider-api-tests directory from coverage
* Make sure to mock both net_version and eth_getBlockByNumber when testing network status
* Fix FakeProvider so that none of the methods have optional callbacks
The mobile sync feature has been removed. It has been disabled for
years. When we enable sync again, it will be using a different
implementation. This has already been removed on the mobile side.
The network controller method `upsertNetworkConfiguration` has been
made async. It makes one async call internally, which is the optional
step of setting the given network as the active network.
If the `setActive` option is set to `true`, this function will not
resolve until after the network switch has completed. If the
`setActive` option is `false`, this change will not have any functional
impact.
Relates to https://github.com/MetaMask/metamask-extension/issues/18587
* Fix swaps controller: update provider after networkIdStore state update
* Listen for changes on networkController.store, instead of networkController.networkIdStore, in the swaps controller
* Fix unit tests
In the `core` version of NetworkController, `removeNetworkConfiguration`
throws an error if the given network configuration ID doesn't match an
existing network configuration. This commits adds the same check for
consistency. It also makes some minor changes to the implementation and
tests for `removeNetworkConfiguration` for consistency as well.
* updated ethereum logo icon
* Updating eth logo (#18631)
* Updating eth logo
* Removing border from eth logo identicon
* Removing old eth logo
* updated snapshot and lint errors
* updated eth logo from svg to png
---------
Co-authored-by: George Marshall <george.marshall@consensys.net>
The network controller method `setActiveNetwork` is now async, and the
asynchronous `_setProviderConfig` step is now awaited. The function
will not resolve until the network has finished switching.
This change affects the `eth_switchEthereumChain` and
`eth_addEthereumChain` middleware, and it affects any network switching
performed in our UI.
Relates to https://github.com/MetaMask/metamask-extension/issues/18587
The network controller method `setProviderType` is now async, and the
async operation `_setProviderConfig` called at the end of the method is
now awaited.
Because the only async operation was the last step, this should have no
impact upon the flow of execution. The only functional change is that
now any callers have the option of waiting until the network switch
operation has completed.
One such change was made, in the `switch-ethereum-chain` middleware. As
a result, an error thrown while the network is switching will now
be thrown in this middleware and returned to the dapp as an internal
error.
Relates to https://github.com/MetaMask/metamask-extension/issues/18587
* Consolidate network stores
The network controller used to have multiple different state stores,
which were composed together to form the main controller state store.
They have been consolidated into a single store. This required few
changes because most state access was already being done through the
composed store.
Fixes https://github.com/MetaMask/metamask-extension/issues/18303
* Add JSDoc comment
Internal network controller methods and fields are now private fields,
using the JavaScript `#` syntax rather than the `private` TypeScript
keyword or a leading underscore.
The one reference to a private field was in the preferences controller
unit tests. Fortunately it was being used to create a test fixture that
was unused. The unnecessary test fixtures have been removed from that
test suite.
Fixes https://github.com/MetaMask/metamask-extension/issues/18588
The network controller internal method `_setProviderConfig` has been
made async, the async `_switchNetwork` operation is now `await`-ed.
Since the `_switchNetwork` call was the last operation, this has zero
functional impact.
Relates to https://github.com/MetaMask/metamask-extension/issues/18587
* Remove the network controller `previousProviderStore`
The `previousProvider` network controller state has been replaced with
a private internal property. This was only used internally, it did not
need to be part of state.
This relates to https://github.com/MetaMask/metamask-extension/issues/18303
* Remove redundant tests
The network controller internal method `_switchNetwork` has been made
async, and the `lookupNetwork` call is now awaited. Because this method
is only used internally, and because the `await`-ed async operation was
the last operation in this function, this change has no functional
impact whatsoever.
Relates to https://github.com/MetaMask/metamask-extension/issues/18587
* WIP commit
* Moving copy out of messages.json, styling changes
* handling scroll button click and disable logic
* moving scrollButton up to popover component, adding logic for accepting terms of use in popover and onboarding flows
* adding terms of use to e2e wallet creation/import
* adjusting failing unit test
* fixing QR code e2e
* updating welcome test
* setting app state in fixtures
* Update app/scripts/controllers/app-state.js
removing console log
Co-authored-by: Nidhi Kumari <nidhi.kumari@consensys.net>
* Update ui/components/app/terms-of-use-popup/terms-of-use-popup.stories.js
adding args to ToU popup storybook
Co-authored-by: Nidhi Kumari <nidhi.kumari@consensys.net>
* Update ui/components/app/terms-of-use-popup/terms-of-use-popup.js
Co-authored-by: Nidhi Kumari <nidhi.kumari@consensys.net>
* updating DS components in terms of use
* popover styling changes
* adding metametrics tracking
* editing scrollbutton behavior
* adding unit test
* code fencing
---------
Co-authored-by: Nidhi Kumari <nidhi.kumari@consensys.net>
In order to be able to better compare differences between the version of
NetworkController in this repo and the version in the `core` repo before
we replace this version with the `core` version, this commit converts
the NetworkController network client tests to TypeScript.
The added types here are copied from the `core` repo. We plan on
making more improvements on the `core` side at some point to polish the
tests and types and reduce some of the duplication, but for now we're
just trying to keep things as similar as possible.
* UX: Multichain: App header
* Export app header, provide required information, put feature flag in place
* Provide available data
* Implement account picker -- centered and opens account popover
* Remove backgrounds, use isUnlocked
* Fix placement of the global menu
* Show logo when unlocked
* Add selector for getting current network, provide props to AvatarNetwork and PickerNetwork
* Wire up the network menu to the header
* fixed ui for all the screens
* updated story for header
* fixed import and header settings
* updated lint error
* fixed tests
* updated header
* removed test
* updated snapshot test
* updated network menu
* updated changes
* removed comment from menu bar
* updated css
* updated test for network list menu
* updated stylesheet
* updated ButtonIcon import
---------
Co-authored-by: NidhiKJha <menidhikjha@gmail.com>
This helps us more easily compare the unit tests for NetworkController
in this repo and the NetworkController in the `core` repo.
Co-authored-by: Mark Stacey <markjstacey@gmail.com>
Co-authored-by: legobeat <109787230+legobeat@users.noreply.github.com>
* Ensure that all networkConfiguration object in networkController state have an id
* Lint fix
* Update app/scripts/migrations/084.ts
Co-authored-by: Mark Stacey <markjstacey@gmail.com>
* Add unit tests for error cases
* Simplify code
* Remove unnecessary any typing
* Fix network controller type checking
* Lint fix
* Improve typing
---------
Co-authored-by: legobeat <109787230+legobeat@users.noreply.github.com>
Co-authored-by: Mark Stacey <markjstacey@gmail.com>
Converting this controller to TypeScript furthers the goal of getting
this whole codebase converted, of course, but it also helps in comparing
the differences between this version of the NetworkController and the
version in the `core` repo more easily, which will ultimately help us in
coalescing the two implementations.
Co-authored-by: Mark Stacey <markjstacey@gmail.com>
Co-authored-by: legobeat <109787230+legobeat@users.noreply.github.com>
The announcement controller has been updated to v2.0.1. The breaking
change in v2 was the migration to the BaseControllerV2 API. This
affected the constructor, as well as some methods/properties that we do
not use.
* use session storage, instead of chrome.runtime.onStartup and globalThis, for firstTimeLoaded architecture
* Ensure account tracker accounts remain defined upon service worker restart
* lint fix
* Simplify code
* Only call browser.storage.session in mv3
* Only call browser.storage.session.set after resetStates in mv3
* fix metamask controller reset states unit tests
* fix test
* fix test
* Actually fix tests
* lint fix
* Added confirm add institutional feature page
* Finished implementing component
* Added all institutional ducks
* Fixed tests
* Removed ducks and console log
* Fixed snapshots
* Fixed messages json
* Changed method name and using useEffect
* Replace useEffect hook with a simple if statement to check if connectRequest exists and add null return statement to avoid warnings
* Remove unneeded dependency
* Added back useEffect and added a extra check to return null if connectRequest is false
* Fixed eslint problem
* Fixed all issues commented in the pr
* Update `@metamask/swappable-obj-proxy`
The package `@metamask/swappable-obj-proxy` has been updated to the
latest version. The breaking changes include moving the package under
the `@metamask` scope and converting it to TypeScript.
* Update policy
The package `safe-event-emitter` has been updated to v2. This update
includes renaming the package to be scoped under `@metamask`, and it
includes a TypeScript migration.
* Add permission cell component
Add storybook and handling for revoked permission colors
* Fix things after conflict resolve after rebase
* Add code refactoring and minor UI changes
* Add permission cell component to snap-update flow
* Update storybook
* Add unit tests for permission cell
* Update component padding
* Fix spacing between permission cells
* Fix main icon color for approved permissions
* Update width value with constant
We want to convert NetworkController to TypeScript in order to be able
to compare differences in the controller between in this repo and the
core repo. To do this, however, we need to convert the dependencies of
the controller to TypeScript.
As a part of this effort, this commit converts
`shared/constants/metametrics` to TypeScript. Note that simple objects
have been largely replaced with enums. There are some cases where I even
split up some of these objects into multiple enums.
Co-authored-by: Mark Stacey <markjstacey@gmail.com>
* added site connection menu component
* reverted change for unlock page
* updated snapshot
* updated state with useSelector
* updated state for connected
* updated icons
* updated test
* updated snapshot
* moved component to multichain folder
* updated color
* added multichain connection to menu bar
* updated default color
* updated css
* updated multichain site with connected site info
* updated ui for not connected state
* removed scripts
* updated lint errors
* updated lint errors
* updated stories
* updated story for not connected to current state
* updated story for not connected to current state
* updated badge to 16px
* updated badge position
* updated snapshot
* fixed lint errors
* updated not connected state icon
* updated constants for status and added new locale string
* NFTs: Use Unknown Collection instead of first NFT name
* Use localization in hook
* Get localization for previously owned
* Fix tests
---------
Co-authored-by: Dan Miller <danjm.com@gmail.com>
* fix(18194): Redirect to extension expanded view when click back to safety button
* Bump phishing warning version
---------
Co-authored-by: Dan J Miller <danjm.com@gmail.com>
The `network` store of the network controller crams two types of data
into one place. It roughly tracks whether we have enough information to
make requests to the network and whether the network is capable of
receiving requests, but it also stores the ID of the network (as
obtained via `net_version`).
Generally we shouldn't be using the network ID for anything, as it has
been completely replaced by chain ID, which all custom RPC endpoints
have been required to support for over a year now. However, as the
network ID is used in various places within the extension codebase,
removing it entirely would be a non-trivial effort. So, minimally, this
commit splits `network` into two stores: `networkId` and
`networkStatus`. But it also expands the concept of network status.
Previously, the network was in one of two states: "loading" and
"not-loading". But now it can be in one of four states:
- `available`: The network is able to receive and respond to requests.
- `unavailable`: The network is not able to receive and respond to
requests for unknown reasons.
- `blocked`: The network is actively blocking requests based on the
user's geolocation. (This is specific to Infura.)
- `unknown`: We don't know whether the network can receive and respond
to requests, either because we haven't checked or we tried to check
and were unsuccessful.
This commit also changes how the network status is determined —
specifically, how many requests are used to determine that status, when
they occur, and whether they are awaited. Previously, the network
controller would make 2 to 3 requests during the course of running
`lookupNetwork`.
* First, if it was an Infura network, it would make a request for
`eth_blockNumber` to determine whether Infura was blocking requests or
not, then emit an appropriate event. This operation was not awaited.
* Then, regardless of the network, it would fetch the network ID via
`net_version`. This operation was awaited.
* Finally, regardless of the network, it would fetch the latest block
via `eth_getBlockByNumber`, then use the result to determine whether
the network supported EIP-1559. This operation was awaited.
Now:
* One fewer request is made, specifically `eth_blockNumber`, as we don't
need to make an extra request to determine whether Infura is blocking
requests; we can reuse `eth_getBlockByNumber`;
* All requests are awaited, which makes `lookupNetwork` run fully
in-band instead of partially out-of-band; and
* Both requests for `net_version` and `eth_getBlockByNumber` are
performed in parallel to make `lookupNetwork` run slightly faster.
Currently, the network controller notifies consumers about events by
emitting them directly from the controller. In order to migrate the
controller to the core repo, where controllers use the BaseControllerV2
interface, events should be emitted via a messenger object.
This commit updates the network controller to use a messenger, and then
updates all of the controllers that listen for network events to use the
messenger as well.
* added the rest of the sev1 warnings to getSnapInstallWarnings
* added and updated translations
* Updated getSnapInstallWarnings to include warnings for all weight-1 permissions
* Updated snap install warning and css according to designs
* fix snaps tests
* fixed alignment/spacing
* updated e2e tests to click through the newly displayed public key access warning
* lint fix
* fixed update snap test
* refactored getSnapInstallWarnings, moved logic to PERMISSION_DESCRIPTIONS
* fix logic to account for objects & arrays
* update function description
* add missing properties to ethereum provider description
* moved id and message to baseDescription to fix error
* add optional chaining to fix undefined error
* more optional chaining
* more optional chaining
* UX: Multichain: Account Menu List
* Move to using stylesheet
* Add hover state
* Implement George's suggestions
* Add connected site avatar
* Add hardware tag
* Create story for selected hardware item
* Progress on the AccountListItemMenu
* Add story for AccountListItemMenu
* Better position the account menu
* Fix AvatarFavicon missing name prop
* Update menu options label to be account specific
* Update text of 'View on Explorer'
* Add AccountListMenu component
* Move all items to multichain directory
* Fix paths
* Fix linting, use AvatarIcon
* Add title and close button to account menu
* Center the popover title
* Add search functionality
* Implementation WIP
* Add MULTICHAIN feature flag
* Add MULTICHAIN feature flag, add actions for menu items
* Properly dispatch events
* Fix search box padding
* Fix sizing of menu item text
* Fix isRequired
* Fix alignment of the popover
* Update label for hardware wallet items, add text for no search results
* Update keyring retreival to remove account and add label
* Fix storybook
* Fix double link click issue, prevent wrapping of values
* Use labelProps for tag variant
* Restructure item menu story
* Empower storybooks for all new components
* Allow only 3 decimals for currencies
* Avoid inline styles
* Prefix classes with multichain, fix account-list-menu storybook
* Close the accounts menu when account details is clicked
* Restore tag.js
* Create global file for multichain css
* Add index file for multichain js
* Update file paths
* Ensure the block domain is present in menu
* Add AccountListItem test
* Add AccountListItemMenu tests
* Show account connect to current dapp
* Improve tests
* Make avatar smaller
* Add tooltip for account menu
* Align icon better
* Update snapshot
* Rename files to DS standard
* Add index files for export
* Export all multichain components
* Update snapshot
* Remove embedded style in popover
* Add comments for props, cleanup storybook
* Improve test coverage
* Improve test code quality
* Remove border form avatar
* Switch to using the ButtonLink iconName prop
* Only show tooltip if character limit is reached
* Restore prior search settings
* Add test for tooltip
* feat: add the consensys zkEVM as a default network
* fix: change infuraNetworkStatus in navigate-txs file
* fix: remove account tracker for zkEVM + remove zkEVM from infura list
* fix: change consensys zkevm name to linea + change rpc url for linea network
* fix: rebase conflicts
* feat: add new colors for linea goerli network
* feat: add new function inside network dropdown to render non infura networks
* feat: add feature toggle for linea network
* fix: add new unit test
---------
Co-authored-by: Dan J Miller <danjm.com@gmail.com>
* Update UI related to MetaMask Snaps Platform trademark
* Remove redundant UI text according to new designs
* Fix lint errors
* Fix e2e test expectation
* Fix lint in test
* Fix e2e test expectation
* Fix some UI parts
* Update CSS for noSnaps message
* Add next design iteration
* Add minor fix
* Update locale message
* Fix learn more text size
* Refactor usage of design system components
---------
Co-authored-by: Erik Marks <rekmarks@protonmail.com>
The `HardwareKeyringTypes` constant has been renamed to `KeyringTypes`
and moved to a separate constants module, to reflect that it contains
more than just hardware wallet keyring types. This corrects a mistake
made recently during a TypeScript conversion.
* Added fallback copy for when we're not able to retrieve a erc721 or erc1155 name in the setApprovalForAll screen and added unit tests
* Fixing lint
* Review requested changes
* Modify small copy changes in messages.json
* Fixing nft e2e tests
* Fixing nft e2e tests final
* Added snapshots for tests and removed data-testid
* Modify translation messages and e2e tests
When the network client tests in this repo were copied over to the core
repo, some alterations were made. This commit copies them back to this
repo so that the two test suites are easier to compare to each other.
Changes include:
* Extracting `testsFor*` functions (functions that bundle similar tests
together) into separate files
* Reordering the tests defined in
`testsForRpcMethodsThatCheckForBlockHashInResponse`
* Reordering the set of RPC methods listed in `shared-tests.js`
* Reordering the type definitions defined in `shared-tests.js` to be
closer to the functions that use them
* Updating the tests defined in `testsForRpcMethodSupportingBlockParam`
so that when they make requests they pass params, even if it's just an
empty array
* MMI adds the Jwt dropdown
* MMI prettier
* review fixes
* adds the component
* adds tests and story file
* lint & prettier fix
* prettier fix
* prettier and clean up
* prettier and clean up
* Add tooltips to show info about a permission
* Make Tooltip component in scope regardless of build type
* Add descriptions
* Add translation variables and fix tooltip
* Use new icons
* Add missing description after rebase
* Fix build issues
* Fix icons
* Fix translation
* Add missing description
* Fix Ethereum icon
* Update coverage
* Revert "Moved subscribe and filter into network controller (#16693)"
This reverts commit 6f6984fa58. That
commit was an RPC middleware refactor intended to move the subscribe
and filter middleware into the network controller, to simplify the
process of sharing this middleware between clients.
This refactor resulted in `eth_subscribe` notifications being sent on
the wrong connections, causing the UI to break in some cases (the UI
`provider` connection does not support notifications). This happened
because the `setupProviderEngine` function runs per-connection,
whereas the engine setup inside the network controller is global. The
global network client cannot support notifications because it has no
way to route them; they'll need to stay in the per-connection provider
engine.
Closes#17467
* Add e2e test
An e2e test has been added that confirms subscriptions are only
broadcast to the site that registered them. This test fails on
`develop`.
* adding base what's new for NFT autodetection
* lintfix
* Adding nfts svg image
* adding new notification to fixture builder for e2e
* lint:fix
* Adding new messaging, styling what's new
* styling descriptions, increasing fullscreen height
* applying firstNotification styling to NFT whats new announcement
* adding scrollDown button to whats new popup
* adding Opensea announcement, removing old announcement, moving scrollDown button up to popover component
* verify-locales:fix
* updating icon
* NFTs: Remove feature flag for release
* Update security tab jest test
* Fix broken test
* Update snapshot
* Update test
* Fix test
* Remove last usages of flag
* Update CI jobs
* Fix jest tests
* add banner-tip component
* set fixed width
* add banner tip props to logo
* fix logo type naming
* update test
* reduce png sizes
* upate type name and add image element test
* updates
* Update ui/components/component-library/banner-tip/banner-tip.js
Co-authored-by: George Marshall <george.marshall@consensys.net>
* update BannerTip
* fix text case banner tip
---------
Co-authored-by: George Marshall <george.marshall@consensys.net>
* Use tokenList to get token details, when available, in getTokenStandardAndDetails
Previously, every call to getTokenStandardAndDetails would fetch data via the provider.
This would result in at least 3 network requests whenever that method is called for an
ERC20 token, contributing to unneccesary loading and lagging in multiple places.
This commit takes advantage of stored data we already have available to avoid the unnecessary
loading.
* Lint fix
* Fix build-quote test
* bump coverage targets
* Pass provider to token-util, for use in ethers Contract module
* Check all possible sources of ERC20 token data before async call to assetsContractController
* Add and update tests
* Update app/scripts/metamask-controller.js
Co-authored-by: Alex Donesky <adonesky@gmail.com>
* Update app/scripts/metamask-controller.js
Co-authored-by: Alex Donesky <adonesky@gmail.com>
* Remove unnecessary this.ethQuery changes
* Use metamask-eth-abis instead of human-standard-token-abi in token-util.ts
* Add explanatory comments to getTokenStandardAndDetails
* lint fix
* Cleanup
* fix test
* Update app/scripts/metamask-controller.js
Co-authored-by: Alex Donesky <adonesky@gmail.com>
* update error message
---------
Co-authored-by: Alex Donesky <adonesky@gmail.com>
* Add Bridge button
* Add newline to the end of bridge svg
* Move Portfolio button
* Vertically center Portfolio button
* Use IconButton for Portfolio button
* Change portfolio button size
* Lowering coverage to get this in for release by a very small amount
* Add unit tests for Portfolio button
---------
Co-authored-by: georgewrmarshall <george.marshall@consensys.net>
* MMI adds all mmi images, build type and manifest files
* build-for-all-custodians
* fix remove-fenced-code test
* no need for axios
* runs prettier
* linter
* MMI moving file out of codebase
* MMI adds locale appNameMmi
* MMI adds locale appNameMmi to verify-locale-strings
* feat: disable deposit popover and replace it with global redirect to onramp on pdapp
* feat: remove legacy code for hardcoded onramp providers
* fix: remove unused visuals and components related to legacy code of deposit popover
* fix: remove unused messages
* feat: use a custom hook for all onramps related methods and variables
* fix: modify the custom hook implementation to include test networks
* fix: remove deprecated file buy-url
* fix: remove references for deleted deposit logos
* fix: network-controller failing unit test
* fix: snapshot loading-swaps-quotes-stories-metadata.test.js.snap
* fix: storybook tests
* fix: remove unused constatns related to buyable onramp chains
* fix: remove unused variables and fix eslint
* adding unit test for useRamps custom hook
* feat: add comment on the proper usage of useRamps within confirm-page-container component
* fix: add unit tests for buy button in token-overview page
* fix: add unit test for open the buy crypto URL for a buyable chain ID in token page
* feat: add unit test coverage for eth-overview page
* fix: update locales
The migration template has been converted to TypeScript. We can start
writing migrations in TypeScript today; they have no dependencies on
JavaScript modules.
This release only includes one breaking change, which is the renaming
of the package to be under the `@metamask` scope. It includes
improvements to the types that will unblock migrating our network
clients to TypeScript.
The minimum browser versions have been updated to Chromium v80 and
Firefox v78.
Chromium v80 is >3 years old, and very few users use older versions
than that.
Firefox v78 is two extended support releases ago (v91 and v102 ar the
previous and current ESR releases).
The PhishingController has been updated to v2. This release should
dramatically reduce network traffic and double the update speed of the
phishing list.
This was accomplished by combining both of our phishing configurations
into one list (the "stalelist"), then creating a separate list of the
changes just the past few days (the "hotlist"). Now users will download
a smaller list more frequently (every 30 minutes rather than every
hour), whereas the full list is only updated every 4 days.
The combined configuration means that we no longer know which list was
responsible for each block. The phishing warning page has been updated
to dynamically look this information up, to ensure users are still
directed to the correct place to dispute a block. This update to the
phishing warning page also includes the recent redesign.
* feat: add desktop enable button component
This component will be added
to the experimental page. Users
will then be able to initialize
a desktop connection
* feat: add desktop pairing page
* feat: add desktop deep-linking shared lib
* test: add initial entries to render helper
Allow specifying initialEntries for
MemoryRouter. This change will allow
testing pages that use the useParam
hook.
* feat: add desktop error page
Error page for any desktop pairing
related issue
* feat: add desktop routes to route component
* feat: add enable desktop button to experimental tab
* feat: add desktop icon when paired in dev mode
* feat: disable ledger live control when desktop enabled
* feat: register desktop error actions on ui init
* fix: add missing code fencing
* chore: remove enable desktop rpc middleware
Now that we are adding the UI
there's no need for this rpc middleware
(as it was used to test desktop background
code)
* fix: display experimental tab for desktop
The network controller has a variety of methods that just retrieve
controller state. These methods are not necessary because controller
state is already part of the public API of the controller and can be
accessed directly.
These methods are:
- getCurrentChainId
- getCurrentRpcUrl
- getNetworkIdentifier
- getNetworkState
- getProviderConfig
- isNetworkLoading
This is part of a larger effort to normalize the API of both network
controllers, to make them easier to merge.
Use DesktopManager in background script to redirect internal and external connections to the desktop app.
Include DesktopController in the MetaMask controller.
Support desktop keyrings in MetaMask controller via the overrides object.
Create middleware handler to connect to the desktop app while UI code is pending.
Add build system support for desktop specific configuration variables.
* refactor class to functional component
* update messages
* fix: use classnames
* feat: add hold to reveal modal
* feat: add new zendesk url for secret recovery phrase and noncustodial wallet
* update: clipboard to clear copied text after delay
* fix: remove save to csv
* feat: update styles for reveal seed page
* fix: update reveal seed snapshot
* add test to check for modal
* fix: lint
* fix: unused messages locale
* fix: use new banner component
* fix: use new button from design system
* fix: update snapshot
* fix: lint
* revert text
* fix: lint
* fix: remove --copy-only
* fix: marginBottom prop value
* fix: iconName and prop error
* --made the QR code slightly smaller so it's less likely to have a scrollbar
--updated the snapshots
* fix: error message not displaying
* SRP hold to reveal using more DS components (#17583)
* Updating to add DS components and remove CSS
* Fixing rendered html and removing some unneeded props
* fix: set block to true
---------
Co-authored-by: Monte <monte.lai@consensys.net>
* fix: add descriptions to messages
* Update ui/components/ui/export-text-container/export-text-container.component.js
fix: lint
Co-authored-by: HowardBraham <HowardBraham@users.noreply.github.com>
* fix: remove using displayWarning in requestRevealSeedWords
* fix: update test to remove displayError
* fix: update design system enums
* fix: messages descriptions
* fix: banner to banneralert
* fix: update preview
* add additional tests
* fix: use jest instead of sinon
* add test if long press isn't completed
* add test if password is wrong
---------
Co-authored-by: Howard Braham <howrad@gmail.com>
Co-authored-by: George Marshall <george.marshall@consensys.net>
The network controller has some tests, but they are incomplete and don't
follow our latest best practices for writing unit tests.
This commit greatly increases the amount of test coverage for the API
that we want to retain in NetworkController, in particular the seemingly
myriad paths that the code takes starting from `initializeProvider`,
`resetConnection`, `setRpcTarget`, `setProviderType`,
`rollbackToPreviousProvider`, and `lookupNetwork`.
There were a couple of pieces of logic I noted which don't seem to have
any effect due to being redundant or unreachable, but they also don't
make our lives more difficult, either, so I opted to leave them in.
Co-authored-by: Mark Stacey <markjstacey@gmail.com>
Co-authored-by: Zachary Belford <belfordz66@gmail.com>
* detect and track ui customizations on personal sign requests
* add feature flag check to metrics
* clean up comments
* get data only if it exists
* updated with PR feedback
* moved constants
* lint
* Apply suggestions from code review
Co-authored-by: Ariella Vu <20778143+digiwand@users.noreply.github.com>
---------
Co-authored-by: Ariella Vu <20778143+digiwand@users.noreply.github.com>
This package has been updated to reduce the bundle size (we already use
the v4 version indirectly). The only breaking change applicable to the
usage of this package in the extension is to the package's exports. The
one import line has been updated accordingly.
This update comes with types (v3 was the TypeScript migration).
* Added translation for eth sign toggle
* Disabled the ability to call eth_sign by default. Added ability within advanced settings to renable support for eth_sign
* Add test case for eth_sign being enabled and disabled
* Modified copy
* Moved rpc method preference to its own object within store
* Complete work on moving rpc method preference into its own object within store
* Fix with prettier
* Fix lint
* Fix a unit test
* Fix test
* Renamed function and object keys to be more intuitive
* Fix e2e test
* Enabled eth_sign through preferences fixture
* Fix lint
* Fix e2e test
Wait for the notification popup to close, leaving 2 window handles the extension and the test dapp
* Fix e2e test
* Fix unit test
Enable eth_sign method
* Lint fix
---------
Co-authored-by: PeterYinusa <peter.yinusa@consensys.net>
Co-authored-by: Dan J Miller <danjm.com@gmail.com>
* Add hardcoded list of human-readable snap names
* Make the text properly bold
* Small style fixes to approval screen
* Run yarn lint:fix
* Update snapshots
Any methods in the Ethereum JSON-RPC spec are now included in our
network client tests. These tests were skipped previously because they
are not supported by Infura.
Closes#16938
* Adding browser outdated notification
* updating dependency
* adding unit tests for util function
* adding unit tests for selectors, lintfix
* Added Tests, refactored notification delay logic
* lint:fix
* adding test coverage for method parameter
* Update app/scripts/controllers/app-state.js
adding documentation details
Co-authored-by: Mark Stacey <markjstacey@gmail.com>
* moving declaration into test
* Update app/scripts/controllers/app-state.test.js
spacing in test file
Co-authored-by: Mark Stacey <markjstacey@gmail.com>
* Update jest.config.js
removing duplicate entries
Co-authored-by: Mark Stacey <markjstacey@gmail.com>
* using async submitRequestToBackground method
* removing unused import
* removing unnecessary link syntax in notification
* adding opera and edge and associated tests
* handling the undefined case in bowser.satisfies
* setOutdatedBrowserWarningLastShown try/catch
* lint:fix
* Removing try/catch and letting errors bubble up
Removing deprecated displayWarning method
Co-authored-by: Mark Stacey <markjstacey@gmail.com>
* taking out forceMetamaskUpdateState call
* excludint app-state test from mocha test suite
* Added note: Jest files should match Mocha excluded
* syntax error, lint:fix
---------
Co-authored-by: Mark Stacey <markjstacey@gmail.com>
Co-authored-by: Dan J Miller <danjm.com@gmail.com>
Co-authored-by: Pedro Figueiredo <pedro.figueiredo@consensys.net>
Co-authored-by: brad-decker <bhdecker84@gmail.com>
* Add tests for `retryOnEmpty` middleware
Tests have been added for the `retryOnEmpty` middleware.
This middleware is only used on the Infura network client, so the tests
that demonstrate this retry behavior are only enabled for the `infura`
provider type.
Most of the tests added were to cover cases where the retry middleware
is skipped, so they were applicable for both provider types.
Closes#17004
* Improve readability of block number tests
The test cases for passing a block number parameter have been made more
readable. Specifically, a comment has been added each time params are
built to call attention to the block parameter and what value it has,
so that it's clear whether it's larger or smaller than the current
block number.
Additionally the blocks for "less than the current block number" and
"equal to the current block number" have been combined using
`describe.each`.
Tests have been added to ensure that our middleware will not return a
cached response to a request with unique parameters. Each parameter
supported by each method is tested independently.
Closes#17003
* Put hardware wallets behind an HARDWARE_WALLETS_MV3 flag
Disable Hardware connect buttons if the flag is set.
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
update to metamask/eth-keyring-controller
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
revert to eth-keyring-controller v8
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
LAvamost after rebase
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
lock file.
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
Added toaster for removed NFTs (#17297)
* added notification for remove nfts
* reverted names for tabs
* updated default key
* updated snapshot
* updated remove nft toast to danger
Setup network controller mocks per-test (#17250)
The network controller unit test network mocks are now setup for each
test. This makes modifying network behavior on a per-test basis easier,
and makes it more clear which test relies upon which mocks.
Security provider check (OpenSea) (#16584)
chore: copy update for metamask fee on swaps (#17133)
* linter fix
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
* setLedgerTransportPreference in the metamask-controller should not be called, or should return immediately, if canUseHardwareWallets() is false
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
Co-authored-by: Jyoti Puri <jyotipuri@gmail.com>
