This is a continuation of #9726, which did not fix the problem
described.
If the initial network when the extension is started is something other
than Mainnet, the swaps controller will never successfully retrieve
swap quotes. This is because `ethers` will continue to communicate
with whichever network the provider was initially on.
We tried fixing this by hard-coding the `chainId` to Mainnet's
`chainId` when constructing the Ethers provider, but this did not work.
I suspect this failed because the `provider` we pass to `ethers` is not
compliant with EIP 1193, as `ethers` doubtless expects it to be.
Instead the entire `ethers` provider is now reconstructed each time the
network changes. This mirrors the approach we take in some other
controllers.
If the initial network when the extension is started is something other
than Mainnet, the swaps controller will never successfully retrieve
swap quotes. This is because the `ethers` provider used by the swaps
controller doesn't allow network changes by default - it assumes that
the network remains the same as when the provider was initialized.
This was fixed by hard-coding Mainnet as the initial chain ID for this
`ethers` provider used by the swaps controller.
Some adjustments needed to be made to the `provider` stub to allow
setting `1` as the network ID and chain ID in unit tests.
`@metamask/eslint-config` has been updated to v4.1.0. This update
requires that we update `eslint` to v7 as well, which in turn requires
updating most `eslint`-related packages.
Most notably, `babel-eslint` was replaced with `@babel/eslint-parser`,
and `babel-eslint-plugin` was replaced by `@babel/eslint-plugin`. This
required renaming all the `babel/*` rules to `@babel/*`.
Most new or updated rules that resulted in lint errors have been
temporarily disabled. They will be fixed and re-enabled in subsequent
PRs.
* Calculate savings per swap relative to median values
* Update test mock quotes, add getMedian tests
* Identify assets by sourceToken and destinationToken
* Delete CachedBalancesController.cachedBalances
* Migrate provider to Rinkeby instead of deleting it
* Convert hex transaction metamaskNetworkId values to decimal
* Don't migrate provider state in e2e tests
* Don't kick custom RPC users to Rinkeby unnecessarily
* Use provider.chainId for address book chainId values
* Add address book migration
* Fix failing unit test
* fixup! Merge branch 'develop' into address-book-use-chainId
* Select address book entries for display by chainId
* Merge all address book entry keys
* fixup! Merge all address book entry keys
* Delete localhost provider type
* Use ganache-cli default chain ID for tests
* Delete unused test firstTimeState variable
* Migrate default ganache-cli network to frequentRpcListDetail
* Add default test provider state
* Add test functionality to createJsonRpcClient
* Lint locales
* Update test middleware creation
* fixup! Update test middleware creation
* Create wrapper function for segment events
* Extract transaction controller metrics calls into own function
Co-authored-by: Mark Stacey <markjstacey@gmail.com>
* Stop passing a gas param to the estimateGas call initiated in the swaps controller timedoutGasReturn
* Stop passing gas params to timedoutGasReturn
* Lint fix
* Stop passing no longer used param to setInitialGasEstimate
When the `chainId` for a custom RPC endpoint is edited, we now migrate
the corresponding address book entries to ensure they are not orphaned.
The address book entries are grouped by the `metamask.network` state,
which unfortunately was sometimes the `chainId`, and sometimes the
`networkId`. It was always the `networkId` for built-in Infura
networks, but for custom RPC endpoints it would be set to the user-set
`chainId` field, with a fallback to the `networkId` of the network.
A recent change will force users to enter valid `chainId`s on all
custom networks, which will be normalized to be hex-prefixed. As a
result, address book contacts will now be keyed by a different string.
The contact entries are now migrated when this edit takes place.
There are some edge cases where two separate entries share the same set
of contacts. For example, if two entries have the same `chainId`, or if
they had the same `networkId` and had no `chainId` set. When the
`chainId` is edited in such cases, the contacts are duplicated on both
networks. This is the best we can do, as we don't have any way to know
which network the contacts _should_ be on.
The `typed-message-manager` unit tests have also been updated as part
of this commit because the addition of `sinon.restore()` to the
preferences controller tests ended up clearing a test object in-between
individual tests in that file. The test object is now re-constructed
before each individual test.
* Remove network config store
* Remove inline networks variable in network controller
* Re-key network controller 'rpcTarget' to 'rpcUrl'
* Require chainId in lookupNetwork, implement eth_chainId
* Require chain ID in network form
* Add alert, migrations, and tests
* Add chainId validation to addToFrequentRpcList
* Update public config state selector to match new network controller
state
* Use network enums in networks-tab.constants
* Ensure chainId in provider config is current
* Update tests
* Use verifyPassword instead of submitPassword when exporting priv key
Fixes#9287 which was when submitPassword is called will fully clear the keyring state
https://github.com/MetaMask/KeyringController/blob/master/index.js#L155ad823d0ac1/index.js (L562)ad823d0ac1/index.js (L726)
Also, pass hideWarning action prop so it will clear the appState.warning if a correct password is never provided on componentWillUnmount
* Hide Warning on componentWillUnmount
* Update exportAccount tests to verifyPassword
* Update ui/app/store/actions.js
Co-authored-by: Mark Stacey <markjstacey@gmail.com>
* Remove mountWithStore enzyme component wrapper in favor for renderWithProvider testing-library/react for tests
Change dropdown component tests to testing-library/react
* Clear Account Details in AppState
We store sensitive information in the AppState under accountDetail for when the modal is active and present. This adds a new action/reducer and componentWillUnmount to clean up the persisted data left after leaving the modal.
* Remove reduntant clearAccountDetails call when clicking done button
* Fix require-unicode-regexp issues
See [`require-unicode-regexp`](https://eslint.org/docs/rules/require-unicode-regexp) for more information.
This change enables `require-unicode-regexp` and fixes the issues raised by the rule.
* Remove case-insensitive flag from regexps
This change fixes the `_validateERC20AssetParams` tests, ensuring that the given
options are all valid except those that are being tested. Previously the `symbol`
property was invalid _in addition to_ the `decimals` property.
This migration had referred to the non-existent
`TransactionsController` instead of `TransactionController`, so it
effectively did nothing. Now it should work.
This migration hasn't been included in any release yet, so we can fix
it in-place instead of adding an additional corrected migration.
The migration comment has also been updated, as it was inaccurate.
It seems that this blocklist checker never worked correctly. Ever since
the initial commit, it was comparing the Number `1` to the `networkId`,
which is a string. Additionally, even if it did throw, the transaction
continued unhindered. The user could still approve it, and there was no
indication shown to the user that anything went wrong. Also some of the
blocklist entries were incorrectly mixed-case, and were never hit.
We can remove this for now, and re-add it later on after we rewrite the
transaction controller.
The `metamaskNetworkId` property in the `txMeta` for incoming
transactions was incorrectly set as a Number instead of a String. This
change was made accidentally as part of #8627.
As a result incoming transactions were being excluded from the
transaction list, as they didn't have a matching network ID.
`metamaskNetworkId` is now set to a string, and a migration has been
added to ensure `metamaskNetworkId` is converted to a string for any
incoming transactions in state.
Imported accounts can be removed, but the permissions controller is not
informed when this happens. Permissions are now removed as part of the
account removal process.
Additionally, the `getPermittedIdentitiesForCurrentTab` selector now
filters out any non-existent accounts, in case a render occurs in the
middle of an account removal.
This was resulting in a render crash upon opening the popup on a site
that was connected to the removed account.
The `TokenRatesController` was accidentally broken in #8744, when the
logic for starting and stopping polling was moved from the `isActive`
property to start/stop functions.
A reference to the now-obsolete `isActive` property was accidentally
left behind, resulting in no exchange rate updates.
A new page has been created for viewing assets. This replaces the old
`selectedToken` state, which previously would augment the home page
to show token-specific information.
The new asset page shows the standard token overview as seen previously
on the home page, plus a history filtered to show just transactions
relevant to that token.
The actions that were available in the old token list menu have been
moved to a "Token Options" menu that mirrors the "Account Options"
menu.
The `selectedTokenAddress` state has been removed, as it is no longer
being used for anything.
`getMetaMetricState` has been renamed to `getBackgroundMetaMetricState`
because its sole purpose is extracting data from the background state
to send metrics from the background. It's not really a selector, but
it was convenient for it to use the same selectors the UI uses to
extract background data, so I left it there for now.
A new Redux store has been added to track state related to browser history.
The most recent "overview" page (i.e. the home page or the asset page) is
currently being tracked, so that actions taken from the asset page can return
the user back to the asset page when the action has finished.
What
- modify `ui/app/helpers/utils/transactions.util.js` and
`ui/lib/account-link.js` to strip trailing slashes
if they are present.
- added relevant tests not just for the new scenario,
but also the general scenarios for these functions,
as there previously was no test coverage for these
two functions.
Why
- Current behaviour, when user enters a block explorer URL
when configuring a custom RPC, and that block explorer URL
contains a trailing `/`.
- e.g. `https://block.explorer/`
- this results in a double-slash (`//`) in the transaction
and account URLs generated by MetaMask.
- e.g. `https://block.explorer/tx/0xabcd...`,
`https://block.explorer/account/0xabcd...`
- This needs to be handled using a router redirect
on the server of the block explorer,
and this changes would avoid that requirement.
Add alert suggesting that the user switch to a connected account. This
alert is displayed when the popup is opened over an active tab that is
connected to some account, but not the current selected account. The
user can choose to switch to a connected account, or dismiss the alert.
This alert is only shown once per account switch. So if the user
repeatedly opens the popup on a dapp without switching accounts, it'll
only be shown the first time. The alert also won't be shown if the user
has just dismissed an "Unconnected account" alert on this same dapp
and account, as that would be redundant.
The alert has a "Don't show me this again" checkbox that allows the
user to disable the alert. It can be re-enabled again on the Alerts
settings page.
The unconnected account alert can now be disabled. A "don't show this
again" checkbox has been added to the alert, which prevents that alert
from being shown in the future.
An alert settings page has been added to the settings as well. This
page allows the user to disable or enable any alert.
This controller was not used. It was used by the
`ComputedBalancesController`, which was removed in #7057 (as it was
also unused).
The pending balances calculator was only used by the balances
controller.
