A race condition exists where after adding an unapproved transaction,
it could be mutated and then replaced when the default gas parameters
are set. This happens because the transaction is added to state and
broadcast before the default gas parameters are set, because
calculating the default gas parameters to use takes some time.
Once they've been calculated, the false assumption was made that the
transaction hadn't changed.
The method responsible for setting the default gas now retrieves an
up-to-date copy of `txMeta`, and conditionally sets the defaults only
if they haven't yet been set.
This race condition was introduced in #2962, though that PR also added
a loading screen that avoided this issue by preventing the user from
interacting with the transaction until after the gas had been
estimated. Unfortunately this loading screen was not carried forward to
the new UI.
* Remove `estimatedGas` property from `txMeta`
The `estimatedGas` property was a cache of the gas value estimated for
a transaction when the default gas limit was set. This property wasn't
used anywhere. It may have been useful for debugging purposes, but the
same gas estimate is already stored on the `history` property so it
should be present in state logs regardless.
* Remove `gasLimitSpecified` txMeta property
The `gasLimitSpecified` property of `txMeta` wasn't used for anything.
It might have been useful for debugging purposes, but whether or not
the gas limit was specified can also be determined from looking at the
transaction history, so it's not a huge loss.
* Remove `gasPriceSpecified` txMeta property
The `gasPriceSpecified` property of `txMeta` wasn't used for anything.
It might have been useful for debugging purposes, but whether or not
the gas price was specified can also be determined from looking at the
transaction history, so it's not a huge loss.
* Remove `simpleSend` txMeta property
The `simpleSend` property of `txMeta` was used to ensure a buffer was
not added to the gas limit during gas estimation for simple send
transactions. It was made redundant by #8484, which accomplishes this
without the use of this property.
Previously a transaction would get assigned a default value during the
`addTxGasDefaults` function, after the transaction was added and sent
to the UI.
Instead the transaction is assigned a default value before it gets
added. This flow is simpler to follow, and it avoids the race condition
where the transaction is assigned a value from the UI before this
default is set. In that situation, the UI-assigned value would be
overridden, which is obviously not desired.
An alert is now shown when the user switches from an account that is
connected to the active tab to an account that is not connected. The
alert prompts the user to dismiss the alert or connect the account
they're switching to.
The "loading" state is handled by disabling the buttons, and the error
state is handled by displaying a generic error message and disabling
the connect button.
The new reducer for this alert has been created with `createSlice` from
the Redux Toolkit. This utility is recommended by the Redux team, and
represents a new style of writing reducers that I hope we will use more
in the future (or at least something similar). `createSlice` constructs
a reducer, actions, and action creators automatically. The reducer is
constructed using their `createReducer` helper, which uses Immer to
allow directly mutating the state in the reducer but exposing these
changes as immutable.
`addToAddressBook` returned a thunk that didn't return a Promise,
despite doing async work. It now returns a Promise.
The callers of this action creator were updated to `await` the
completion of the operation. It was called just before redirecting the
user to a different page or closing a modal, and it seemed appropriate
to wait before doing those things.
The `getSelectedAddress` selector has a fallback of selecting the first
MetaMask account. This is not useful. The only time the
`selectedAddress` is not set is during onboarding, before any accounts
exist, so selecting the first account wouldn't be useful anyway.
Co-authored-by: Erik Marks <25517051+rekmarks@users.noreply.github.com>
`setRpcTarget` returned a thunk that didn't return a Promise, despite
doing async work. It now returns a Promise.
The callers of this action creator didn't need to be updated, as they
were all in event handlers that didn't require knowing when the
operation had completed.
Changes to the background state were being detected in the `update`
event handler in `ui/index.js` that receives state updates from the
background. However this doesn't catch every update; some state
changes are received by the UI in-between these `update` events.
The background `getState` function is callable directly from the UI,
and many action creators call it via `forceUpdateMetamaskState` to
update the `metamask` state immediately without waiting for the next
`update` event. These state updates skip this change detection in
`ui/index.js`.
For example, if a 3Box state restoration resulted in a `currentLocale`
change, and then a `forceUpdateMetamaskState` call completed before the
next `update `event was received, then `updateCurrentLocale` wouldn't
be called, and the `locale` store would not be updated correctly with
the localized messages for the new locale.
We now check for background state changes in the `updateMetamaskState`
action creator. All `metamask` state updates go through this function,
so we aren't missing any changes anymore.
`setProviderType` returned a thunk that didn't return a Promise,
despite doing async work. It now returns a Promise.
None of the callers of this action creator needed to know when it
completed, so no changes to the call sites were made.
A simple default store of `{ metamask: {} }` is now used for the
actions tests.
While I would prefer that any expectations about the store be included
in each test, the mere existence of this `metamask` object seems like
a fairly reasonable default, as it's (hopefully) impossible for it to
be unset at runtime.
The `2-state.json` test state file was deleted as well, as it was no
longer used.
Many of the "message manager" background methods return a full copy of
the background state in their response; presumably to save us from
making a full round-trip to update the UI `metamask` state after it
changes. However, the action creators responsible for calling these
methods were calling `updateMetamaskState` even when the background
method failed. In effect, they were setting the UI `metamask` state to
`undefined`.
They have been updated to only set the UI `metamask` state if the
background method succeeded.
`setSelectedAddress` returned a thunk that didn't return a Promise,
despite doing async work. It now returns a Promise.
This action creator was only called in two places, and neither benefit
from using the Promise now returned. They were both event handlers. In
both cases there was an existing Promise chain, but the only thing
after this set was a `catch` block that displayed any error
encountered. I decided not to return the result of `setSelectedAddress`
to this chain, because all it would do is set the warning a second
time in the event of failure.
`showAccountDetail` returned a thunk that didn't return a Promise,
despite doing async work. Now it returns a Promise.
This action is only called in one place, and it looks like the actions
dispatched alongside it were meant to be run in parallel, so no changes
were made there.
This state has been removed from the background. It was used for the
old UI, and has been unused for some time. A migration has been added
to delete this state as well.
The action creator responsible for updating this state has been removed
from the UI as well, along with the `callBackgroundThenUpdateNoSpinner`
convenience function, which was only used for this action.
The `transForward` app state is no longer used, so it has been removed.
Associated actions have been removed as well.
This state dates back a few years, so I was unable to determine when it
was made obsolete.
Keyrings are added either through the `getKeyringForDevice` background
method (as part of the hardware wallet connect flow), or via
`importAccountWithStrategy` (when importing an account). The
`addNewKeyring` action and corresponding background method has not been
used in a long time.
This state hasn't been used since #5886. The nonce we display in our UI
is now from the background, rather than queried directly from the
front-end.
This also means we save making this network call each time a pending
transaction is added, and each time the transaction list is mounted.
Some of the unit tests for `actions.js` were calling async actions
without `await`-ing them. All async actions are now called with `await`
to ensure they've completed.
`markPasswordForgotten` is an asynchronous function, but it was being
called synchronously. The page was redirected without waiting for the
operation to complete.
We now wait for the operation to complete before continuing. Failure is
still not being handled correctly, but that will be addressed in a
separate PR.
* Add popover for informing user about the connected status indicator
* Ensure user only sees connected status info popover once
* Default connectedStatusPopoverHasBeenShown to true and set it to false in a migration
* Add unit test for migration 42
* Initialize AppStateController if it does not exist in migration 42
* Update connect indicator popup locale text
* Code cleanup for connected-indicator-info-popup
* Code cleanup for connected-indicator-info-popup
This method adds the given account to the given origin's list of
exposed accounts. This method is not yet used, but it will be in
subsequent PRs (e.g. #8312)
This method has been added to the background API, and a wrapper action
creator has been written as well.
Now that identities are available synchronously in the permissions
controller, accounts can be validated synchronously as well. Any
account the user wants to give permissions to should already be tracked
as an identity in the preferences controller.
* Fix order of accounts in `eth_accounts` response
The accounts returned by `eth_accounts` were in a fixed order - the
order in which the keyring returned them - rather than ordered with the
selected account first. The accounts returned by the `accountsChanged`
event were ordered with the selected account first, but the same order
wasn't used for `eth_accounts`.
We needed to store additional state in order to determine the correct
account order correctly on all dapps. We had only been storing the
current selected account, but since we also need to determine the
primary account per dapp (i.e. the last "selected" account among the
accounts exposed to that dapp), that wasn't enough.
A `lastSelected` property has been added to each identity in the
preferences controller to keep track of the last selected time. This
property is set to the current time (in milliseconds) whenever a new
selection is made. The accounts returned with `accountsChanged` and by
`eth_accounts` are both ordered by this property.
The `updatePermittedAccounts` function was merged with the internal
methods for responding to account selection, to keep things simpler. It
wasn't called externally anyway, so it wasn't needed in the public API.
* Remove caveat update upon change in selected account
The order of accounts in the caveat isn't meaningful, so the caveat
doesn't need to be updated when the accounts get re-ordered.
* Emit event regardless of account order
Now that we're no longer relying upon the caveat for the account order,
we also have no way of knowing if a particular account selection
resulted in a change in order or not. The notification is now emitted
whenever an exposed account is selected - even if the order stayed the
same.
The inpage provider currently caches the account order, so it can be
relied upon to ignore these redundant events. We were already emiting
redundant `accountsChanged` events in some cases anyway.
Selecting a new account now results in all domains that can view this
change being notified. Previously only the dapp in the active tab was
being notified (though not correctly, as the `origin` was accidentally
set to the MetaMask chrome extension origin).
This handling of account selection has been moved into the background
to minimize the gap between account selection and the notification
being sent out. It's simpler for the UI to not be involved anyway.
Previously all browser globals were allowed to be used anywhere by
ESLint because we had set the `env` property to `browser` in the ESLint
config. This has made it easy to accidentally use browser globals
(e.g. #8338), so it has been removed. Instead we now have a short list
of allowed globals.
All browser globals are now accessed as properties on `window`.
Unfortunately this change resulted in a few different confusing unit
test errors, as some of our unit tests setup assumed that a particular
global would be used via `window` or `global`. In particular,
`window.fetch` didn't work correctly because it wasn't patched by the
AbortController polyfill (only `global.fetch` was being patched).
The `jsdom-global` package we were using complicated matters by setting
all of the JSDOM `window` properties directly on `global`, overwriting
the `AbortController` for example.
The `helpers.js` test setup module has been simplified somewhat by
removing `jsdom-global` and constructing the JSDOM instance manually.
The JSDOM window is set on `window`, and a few properties are set on
`global` as well as needed by various dependencies. `node-fetch` and
the AbortController polyfill/patch now work as expected as well,
though `fetch` is only available on `window` now.
The tests for the detect-tokens controller were nearly all broken. They
have been fixed, and a few improvements were made to controller itself
to help with this.
* The core `detectNewTokens` method has been updated to be async, so
that the caller can know when the operation had completed.
* The part of the function that used `Web3` to check the token balances
has been split into a separate function, so that that part could be
stubbed out in tests. Eventually we should test this using `ganache`
instead, but this was an easier first step.
* The internal `tokenAddresses` array is now initialized on
construction, rather than upon the first Preferences controller update.
The `detectNewTokens` function would have previously failed if it ran
prior to this initialization, so it was failing if called before any
preferences state changes.
Additionally, the `detectTokenBalance` function was removed, as it was
no longer used.
The tests have been updated to ensure they're actually testing the
behavior they purport to be testing. I've simulated a test failure with
each one to check that it'd fail when it should. The preferences
controller instance was updated to set addresses correctly as well.
The "global" action constants (the ones previously in `actions.js`)
have been moved to a separate module. This was necessary to avoid a
circular dependency in an upcoming change that was causing problems.
In general the "ducks" pattern of organizing Redux stores does result
in circular dependency problems. This is because reuse of actions
between reducers is encouraged, so it's not uncommon for two reducers
to want to reference an action from the other. Going forward we can
avoid this problem by moving action constants that are shared between
reducers into this shared module.
This action was never triggered in practice, as MetaMask is never
unlocked from the UI. The unlock always occurs as a result of a
background state update.
* Connect screen popup redesign
* Open permission request in notification instead of tab
* Remove no longer user locales
* Update permissions unit test mock to accout for change of opts passed to permissions controller
* Lint fix
* Inline broken line svg in permission-page-container-content.component.js for faster loading
* Add back button to second screen on connect flow
* Add xOfY locale and use for the page count in the connect flow
* Lint fix for svgs permission-page-container-content.component.js
* Fix rebase error
* Lint fix
* Clean up styles on the connect-screen-into-popup branch
* Use closeCurrentWindow to close window on cancel when in full screen connect flow
* Handle errors in rejectPermissionsRequest
* Full screen styles for connect flow
* Lint fixed in permissions-connect and actions.js
* Redirect screen now shows metamask icon instead of users identicon
* Fix subtitle spacing in permissions-connect-header'
* Use window.close instead of closeCurrentWindow() in cancelPermissionsRequest
* Use permissions-connect-header__subtitle in permissions-connect-header.component
The `network` prop was being passed to the Identicon despite that not
being an Identicon prop, and the `userAddress` prop was being passed
down by the container but was unused. The methods removed were not
called anywhere.
The `metamask.send.from` field was assumed by various selectors to be
an object, but instead it was recently set to a string. The selectors
have been updated to assume it's a string, and to fetch the full
account object explicitly.
The selector `getSendFromObject` was repurposed for this, as that's
basically what it already did. The optional address parameter was
removed though, as that was only used to fetch the `from` address in
cases where the `send` state was set without there being a `from`
address set. That case is no longer possible, as the `from` address is
always set upon the initialization of the `send` state.
The `getSendFromObject` selector no longer fetches the 'name' of that
address from the address book state either. This property was not used
in either of the cases this selector was used.
The `tabId` of the message sender is now added to the middleware
request object. This step is omitted if the `tabId` is not provided.
This is done early in the middleware stack, so the `tabId` should be
available for any subsequent middleware to use.
The Onboarding Middleware has also been modified to get the `tabId`
from the request object, rather than expecting it as a parameter upon
creation.
This refactor will enable further uses of the `tabId`.
* Revert "Revert "Update Wyre ETH purchase url" (#7631)"
This reverts commit bc67d1eeca.
* Restrict widget to just debit card payments
Apple Pay apparently only works on Safari.
* Use @metamask/eslint-config@1.1.0
* Use eslint-plugin-mocha@6.2.2
* Mark root ESLint config as root
* Update Mocha ESLint rules with shared ESLint config
This was done to reduce the number of direct dependencies we have. It
should be functionally equivalent. The bundle size should not change,
as we use `clone` as a transitive dependency in a number of places.
The e2e tests were failing intermittently after removing an account
because the account was shown as not deleted after the removal. I
suspect this was because the account _had_ been removed, but that
change to the background state hadn't yet propagated to the UI.
The background state is now synced before the loading overlay for
removing the account is removed, ensuring that the removed account
cannot be seen in the UI after removal.
* Remove unused functions from `mapDispatchToProps`
The actions import was also updated to import only the two actions
used, rather than all actions.
* Remove unused container component
Well, technically it was the props injected by this container that were
unused. The container served no purpose, so the component it surrounded
is now used directly instead.
* Remove both unused `getCurrentViewContext` selectors
* Remove unused SHOW_CONFIG_PAGE action
* Remove checks for `currentView` with name `config`
Now that the SHOW_CONFIG_PAGE action has been removed, it's no longer
possible for `currentView.name` to be set to that value.
* Remove unused `wallet-view` container props
* Delete unused SHOW_SEND_PAGE and SHOW_ADD_TOKEN_PAGE actions
* Remove unused `account-menu.container` props
* Remove unused SHOW_INFO_PAGE action
* Remove unused SET_NEW_ACCOUNT_FORM action
* Remove unused onboarding stream
* Pass `sender` through to `setupProviderEngine`
The Port `sender` has been passed down a few more layers. This allows
us to get more information from the sender deeper in the stack, but
also simplifies things a bit as well. For example, now the "fake"
URL object with the `metamask` hostname is no longer needed.
* Create onboarding middleware
This middleware intercepts `wallet_registerOnboarding` RPC messages. It
will register the sender as an oboarding initiator if possible, and
otherwise ignores the message.
* add PermissionsController
remove provider approval controller
integrate rpc-cap
create PermissionsController
move provider approval functionality to permissions controller
add permissions approval ui, settings page
add permissions activity and history
move some functionality to metamask-inpage-provider
rename siteMetadata -> domainMetadata
add accountsChange notification to inpage provider
move functionality to inpage provider
update inpage provider
Remove 'Connections' settings page (#7369)
add hooks for exposing accounts in settings
rename unused messages in non-English locales
Add external extension id to metadata (#7396)
update inpage provider, rpc-cap
add eth_requestAccounts handling to background
prevent notifying connections if extension is locked
update inpage provider
Fix lint errors
add migration
review fixes
transaction controller review updates
removed unused messages
* Login Per Site UI (#7368)
* LoginPerSite original UI changes to keep
* First commit
* Get necessary connected tab info for redirect and icon display for permissioned sites
* Fix up designs and add missing features
* Some lint fixes
* More lint fixes
* Ensures the tx controller + tx-state-manager orders transactions in the order they are received
* Code cleanup for LoginPerSite-ui
* Update e2e tests to use new connection flow
* Fix display of connect screen and app header after login when connect request present
* Update metamask-responsive-ui.spec for new item in accounts dropdown
* Fix approve container by replacing approvedOrigins with domainMetaData
* Adds test/e2e/permissions.spec.js
* Correctly handle cancellation of a permissions request
* Redirect to home after disconnecting all sites / cancelling all permissions
* Fix display of site icons in menu
* Fix height of permissions page container
* Remove unused locale messages
* Set default values for openExternalTabs and tabIdOrigins in account-menu.container
* More code cleanup for LoginPerSite-ui
* Use extensions api to close tab in permissions-connect
* Remove unnecessary change in domIsReady() in contentscript
* Remove unnecessary private function markers and class methods (for background tab info) in metamask-controller.
* Adds getOriginOfCurrentTab selector
* Adds IconWithFallback component and substitutes for appropriate cases
* Add and utilize font mixins
* Remove unused method in disconnect-all.container.js
* Simplify buttonSizeLarge code in page-container-footer.component.js
* Add and utilize getAccountsWithLabels selector
* Remove console.log in ui/app/store/actions.js
* Change last connected time format to yyyy-M-d
* Fix css associated with IconWithFallback change
* Ensure tracked openNonMetamaskTabsIDs are correctly set to inactive on tab changes
* Code cleanup for LoginPerSite-ui
* Use reusable function for modifying openNonMetamaskTabsIDs in background.js
* Enables automatic switching to connected account when connected domain is open
* Prevent exploit of tabIdOriginMap in background.js
* Remove unneeded code from contentscript.js
* Simplify current tab origin and window opener logic using remotePort listener tabs.queryTabs
* Design and styling fixes for LoginPerSite-ui
* Fix permissionHistory and permission logging for eth_requestAccounts and eth_accounts
* Front end changes to support display of lastConnected time in connected and permissions screens
* Fix lint errors
* Refactor structure of permissionsHistory
* Fix default values and object modifications for domain and permissionsHistory related data
* Fix connecting to new accounts from modal
* Replace retweet.svg with connect-white.svg
* Fix signature-request.spec
* Update metamask-inpage-provider version
* Fix permissions e2e tests
* Remove unneeded delay from test/e2e/signature-request.spec.js
* Add delay before attempting to retrieve network id in dapp in ethereum-on=.spec
* Use requestAccountTabIds strategy for determining tab id that opened a given window
* Improve default values for permissions requests
* Add some message descriptions to app/_locales/en/messages.json
* Code clean up in permission controller
* Stopped deep cloning object in mapObjectValues
* Bump metamask-inpage-provider version
* Add missing description in app/_locales/en/messages.json
* Return promises from queryTabs and switchToTab of extension.js
* Remove unused getAllPermissions function
* Use default props in icon-with-fallback.component.js
* Stop passing to permissions controller
* Delete no longer used clear-approved-origins modal code
* Remove duplicate imports in ui/app/components/app/index.scss
* Use URL instead of regex in getOriginFromUrl()
* Add runtime error checking to platform, promise based extension.tab methods
* Support permission requests from external extensions
* Improve font size and colour of the domain origin on the permission confirmation screen
* Add support for toggling permissions
* Ensure getRenderablePermissionsDomains only returns domains with exposedAccount caveat permissions
* Remove unused code from LoginPerSite-ui branch
* Ensure modal closes on Enter press for new-account-modal.component.js
* Lint fix
* fixup! Login Per Site UI (#7368)
* Some code cleanup for LoginPerSite
* Adds UX for connecting to dapps via the connected sites screen (#7593)
* Adds UX for connecting to dapps via the connected sites screen
* Use openMetaMaskTabIds from background.js to determine if current active tab is MetaMask
* Delete unused permissions controller methods
* Fixes two small bugs in the LoginPerSite ui (#7595)
* Restore `providerRequest` message translations (#7600)
This message was removed, but it was replaced with a very similar
message called `likeToConnect`. The only difference is that the new
message has "MetaMask" in it. Preserving these messages without
"MetaMask" is probably better than deleting them, so these messages
have all been restored and renamed to `likeToConnect`.
* Login per site no sitemetadata fix (#7610)
* Support connected sites for which we have no site metadata.
* Change property containing subtitle info often populated by origin to a more accurate of purpose name
* Lint fix
* Improve disconnection modal messages (#7612)
* Improve disconnectAccountModalDescription and disconnectAllModalDescription messages
* Update disconnectAccountModalDescription app/_locales/en/messages.json
Co-Authored-By: Mark Stacey <markjstacey@gmail.com>
* Improve disconnectAccount modal message clarity
* Adds cancel button to the account selection screen of the permissions request flow (#7613)
* Fix eth_accounts permission language & selectability (#7614)
* fix eth_accounts language & selectability
* fix MetaMask capitalization in all messages
* Close sidebar when opening connected sites (#7611)
The 'Connected Sites' button in the accounts details now closes the
sidebar, if it is open. This was accomplished by pulling the click
handler for that button up to the wallet view component, where another
button already followed a similar pattern of closing the sidebar.
It seemed confusing to me that one handler was in the `AccountsDetails`
container component, and one was handed down from above, so I added
PropTypes to the container component.
I'm not sure that the WalletView component is the best place for this
logic, but I've put it there for now to be consistent with the add
token button.
* Reject permissions request upon tab close (#7618)
Permissions requests are now rejected when the page is closed. This
only applies to the full-screen view, as that is the view permission
requests should be handled in. The case where the user deals with the
request through a different view is handled in #7617
* Handle tab update failure (#7619)
`extension.tabs.update` can sometimes fail if the user interacts with
the tabs directly around the same time. The redirect flow has been
updated to ensure that the permissions tab is still closed in that
case. The user is on their own to find the dapp tab again in that case.
* Login per site tab popup fixes (#7617)
* Handle redirect in response to state update in permissions-connect
* Ensure origin is available to permissions-connect subcomponents during redirect
* Hide app bar whenever on redirect route
* Improvements to handling of redirects in permissions-connect
* Ensure permission request id change handling only happens when page is not null
* Lint fix
* Decouple confirm transaction screen from the selected address (#7622)
* Avoid race condtion that could prevent contextual account switching (#7623)
There was a race condition in the logic responsible for switching the
selected account based upon the active tab. It was asynchronously
querying the active tab, then assuming it had been retrieved later.
The active tab info itself was already in the redux store in another
spot, one that is guaranteed to be set before the UI renders. The
race condition was avoided by deleting the duplicate state, and using
the other active tab state.
* Only redirect back to dapp if current tab is active (#7621)
The "redirect back to dapp" behaviour can be disruptive when the
permissions connect tab is not active. The purpose of the redirect was
to maintain context between the dapp and the permissions request, but
if the user has already moved to another tab, that no longer applies.
* Fix JSX style lint errors
* Remove unused state
Maker has upgraded its Dai token to "Multi-Collateral Dai" (MCD) and requires
all users interacting with Dai migrate their tokens to the new version. Dai
now exclusively refers to Multi-Collateral Dai and what was previouly called
Dai is now Sai (Single Collateral Dai).
In this description, Sai refers to what was (prior to the 2019-11-18) known as Dai.
Dai is the _new_ token.
This changeset:
1. Only affects users who had non-zero Sai at the old contract address
2. Displays a persistent notification for users with Sai
3. Updates the token symbol for users already tracking the Sai token
4. Bumps our direct and indirect eth-contract-metadata dependencies
The notification copy:
> A message from Maker: The new Multi-Collateral Dai token has been released. Your old tokens are now called Sai. Please upgrade your Sai tokens to the new Dai.
The copy is from the Maker team.
* ENS Reverse Resolution support
* Save punycode for ENS domains with Unicode characters
* Update SenderToRecipient recipientEns tooltip
* Use cached results when reverse-resolving ENS names
* Display ENS names in tx activity log
* Add estimated time to pending transactions
* add sytles for pending transactions component
* add media queries styling for pending transactions component
* fix lint errors, remove extra spaces
* refactor code to call `fetchBasicGasAndTimeEstimates` method once
* refactor code to call `getgetRenderableTimeEstimate` method once
* fix, correct export to use `transaction-time-remaining-component`
* fix indentation issues after running `yarn lint`
* newBigSigDig in gas-price-chart.utils supports strings
* Code cleanup
* Ensure fetchBasicGasAndTimeEstimates is only called from tx-list if there are pending-txs
* Move gas time estimate utilities into utility file
* Move getTxParams to transaction selector file
* Add feature flag for display of remaining transaction time in tx history list
* Fix circular dependency by removing unused import of transactionSelector in selectors.js
* Use correct feature flag property name transactionTime
* Ensure that tx list component correctly responds to turning tx time feature on
* Prevent precision errors in newBigSigDig
* Code clean up for pending transaction times
* Update transaction-time-remaining feature to count down seconds, countdown seconds and show '< 30'
* Code clean up for transaction-time-remaining feature
* tests - create tests for pending middlewares
* transactions - add r,s,v values to the txMeta to match the JSON rpc response
* network - add new middleware for eth_getTransactionByHash that the checks pending tx's for a response value
* transactions/pending - use getTransactionReceipt for checking if tx is in a block
* meta - file rename
If the extension ID is set, an alternate title and subtitle are used
for the Connect Request screen. The title is always `External
Extension`, and the subtitle is `Extension ID: [id]` instead of the
origin (which would just be `[extension-scheme]://[id]` anyway).
The hostname for the site is used as a fallback in case it has no
title.
The artificial hostname set for internal connections has been renamed
from 'MetaMask' to 'metamask' because URL objects automatically
normalize hostnames to be all lower-case, and it was more convenient to
use a URL object so that the parameter would be the same type as used
for an untrusted connection.
* Ensure correct transaction category when sending to contracts but there is no txParams data
* Update gas when pasting address in send
* Gracefully fall back is send.util/estimateGas when blockGasLimit from background is falsy
* Remove network request frontend fallback for blockGasLimit
* Add some needed slow downs to e2e tests
The 3Box initialization is triggered by login, but it no longer blocks
the login from finishing. The 3Box initialization is designed to run in
the background, so there's no reason to block on it.
* Delete unused code
* Run threebox imports through migrations
* Remove 3box feature flag
* Remove unnecessary use of 'type' in threebox._updatePlugin
* Fix threebox controller getLastUpdated
* Turn off threebox by default
* Rename restoredFromThreeBox to showRestorePrompt
* Remove accientally added method from threebox controller
* Restore from threebox on import from unlock screen
* Throw on non 404 errors from Box.getconfig in new3Box
* Adds ab test controller with a fullScreenVsPopup test
* Add migration for fullScreenVsPopup state
* Move abtest state under an 'abtests' object.
* MetaMask shows fullScreen group of a/b test unapproved txs in a full browser tab
* Ensure cancel metrics event in confirm-transaction-base.component.js is sent in all cases
* Switch to existing tab for unapproved tx if it exists when opening in full screen
* Send metrics event for entering a/b test from confirm screen
* Fix lint, unit and integration tests related to a/b test code
* Remove unnecessary tabs.query call in triggerUiInNewTab
* Adds threebox controller
* Adds threebox approval modal
* Fix unit tests and lint after addition of threebox
* Correct threebox behaviour after rejecting request for backup; fixes e2e tests.
* Update threebox controller for automatic syncing
* Ensure frontend locale updates when preferences are changed via direct update within controller
* Add toggle in settings for 3box syncing
* Update threebox controller for latest 3box version
* Delete unnecessary frontend changes for threebox integration
* Backing up address book contacts with threebox
* Update unit tests for 3box-integration additions
* Only enable threebox by default for new wallets
* Mock globals for correct unit tests
* 3box '1.10.2' -> '^1.10.2'
* Correct capilalization on 3Box
* Use log.debug instead of console.log in threebox controller
* Update yarn.lock
* Remove edge build
* Split 3box module into background deps js file
* extra bundle opts for bg-libs
* sync yarn.lock
* new3Box logic
* Show confirm threebox restore after import
* Remove bg-libs.js from manifest file for dev builds
* Switch 3Box controller to using the spaces api (instead of the profile api)
* Finalize switching to spaces api and only restoring from 3box after import
* Update metamask-controller-test.js for threebox controller changes
* Make threebox modal style consistent with others and update success button wording
* Use mock 3box when in test
* Correct 3box modal header
* Remove unnecessary property of threebox controller provider
* Remove unnecessary method calls after restoration from 3box in the threebox-restore-confirm modal.
* Replace setThreeBoxSyncingPermission calls in routes/index.js with turnThreeBoxSyncingOn
* Replace erroneous use of with
* Replace erroneous use of threeboxSyncing with threeBoxSyncingAllowed in advancted-tab directory
* Lint fixes for 3box changes
* Log errors encountered when updating 3Box
* Remove unnecessary parameter from state update
* Add timeout to initial 3Box sync
The initial 3Box sync will now timeout after 1 minute. If the timeout
is triggered, 3Box is disabled and cannot be re-enabled unless the
initial sync does finally finish. If it never finishes, 3Box cannot
be enabled unless the extension is reinstalled.
The Advanced Settings page was updated to show this option as disabled
in that circumstance, with a new discription explaining why it's
disabled. The UI here could certainly be improved.
Additionally, "on" and "off" labels were added to the toggle to match
the other toggles on the Advanced Settings page.
* Use non-minified 3Box module
We had previously used the minified 3Box module to avoid a build error
encountered when `envify` was processing the `libp2p` module (which is
used by 3Box). The build would fail because `esprima` (used by `envify`)
is incompatible with the object spread/rest operator (which is used in
`libp2p`).
That issue has been solved by adding a global Babelify transformation
specifically for transpiling out the object rest/spread operator from
dependencies. It has been targetted to only affect `libp2p` to avoid
extending the build time too much. This workaround can be used until
a new version of `esprima` is released that includes this bug fix.
* Use app key addresses for threebox
* Replace use of modal for confirming 3box restoration with a home notification
* Adds e2e tests for restoring from threebox
* Update eth-keyring-controller to 5.1.0
* Correct parameters passed to getAppKeyAddress in threebox.js
* Add prefix to origin passed to getAppKeyAddress in threebox.js
* Remove unused locale message.
* Prevent CORS errors in firefox e2e tests
* Ensure extraneous scripts are excluded from the local test dev build
* Move threeBoxLastUpdate state from home.component to redux
* Threebox PR code cleanup
* Always use first address when initializing threebox
* Replace setRestoredFromThreeBox api with setRestoredFromThreeBoxToFalse and setRestoredFromThreeBoxToTrue
* Update development/metamaskbot-build-announce.js to include ui-libs and bg-libs in hard coded bundle list
* Update test/e2e/threebox.spec.js to use new helpers added with pull #7144
* Make setFeatureFlag available on the ui window during testing
* Hide threebox feature behind a feature flag that can only be activated via dev console
* Remove unnecessary migration of threebox feature flag
* Prevent this.init() call in threebox constructor if feature flag is not turned on
* Prevent threebox notification from showing if feature flag is falsy
* http://localhost/8889 -> http://localhost/* in gulp manifest:testing tasks
* Prevent multiple warnings for the same locale message
Our i18n helper issues warnings whenever a requested message is
missing. These warnings are helpful in assisting translation efforts,
but they can be distracting otherwise. They're especially problematic
for locales that are missing many messages. My browser ended up
crashing on more than one occasion due to the sheer volume of warnings.
The warning has been updated to only be issued once per missing key.
This required updating the method to pass in the current locale. The
current locale was added to the warning itself as well, which could be
helpful for cases where a message is missing in both the current locale
and the fallback ('en').
* Change locale and localeMessages as single action
Updating the current locale and the locale messages resulted in two
renders, and during the first the state was inconsistent (it would say
the locale had changed to the new one, but still be using the old set
of locale messages). Instead the locale is now updated with one atomic
action.
This was required after adding the locale to the missing locale message
warning, as otherwise it would say the message was missing from the
wrong locale.
* Add missing test descriptions
* Fix async tests that expect a rejection
These tests expected the function under test to return a rejected
promise, and had assertions to be run in the `catch` clause. However,
the tests would still pass if the function didn't reject, with
the assertions never being run.
The tests have been updated to fail if the function doesn't throw.
* Handle ignored promise rejection
In the case where `forceUpdateMetamaskState` rejects, the function
`setSeedPhraseBackedUp` would never resolve. It has been updated to
pass along the rejection instead.
* Return after rejecting promise in action
A few actions would continue after encountering an error, resulting in
errors being compounded. Instead all actions will now return after
encountering an error (which it looks like was the intention in these
cases anyway).
* Fix styling of `.transaction-list`
* Filter `incomingTxListSelector` by network as well
* Start and stop block tracker polling in incoming tx controller
* Add fetch with abort in bg for `IncomingTxController`
* Nix notification for Share Address
* Add Connections settings tab in place of privacy mode toggle
* Split ProviderApprovalController into two stores
* Remove privacyMode feature flag altogether
* Add migration to remove privacyMode feature flag
* Add background environment type
The `getEnvironmentType` method now checks for the background
environment as well, instead of returning 'notification' for that case.
Instead of adding another regex for the background path, the regexes
for each environment have been replaced with the URL constructor[0].
This is the standard method of parsing URLs, and is available in all
supported browsers.
[0]: https://developer.mozilla.org/en-US/docs/Web/API/URL
* Add note regarding a missing manifest permission
The `url` parameter to `tabs.query(...)` requires the `tabs` permission,
and will be ignored otherwise. We are missing this permission, so that
call does not work.
* Close window after opening full screen
The browser behaviour when opening a new tab differs between Chrome and
Firefox. In the case of a popup, Chrome will close the popup whereas
Firefox will leave it open. In the case of the notification window,
Chrome will move the new tab to the foreground, whereas Firefox will
leave the notification window in the foreground when opening a new tab.
We always want to close the current UI (popup or notification) when
switching to a full-screen view. The only exception to this is when the
switch is triggered from the background, which has no UI.
Closes#6513, #6685
The `seedWords` state was removed from the PreferencesController
recently in #6920. That state hadn't been used in some time, and there
was a long period during which `seedWords` was periodically scrubbed
from the state, so it's highly unlikely that it still exists in state
for most users. It's hard to guarantee that it _doesn't_ though,
especially if a user hasn't opened MetaMask in a few months.
* Style Send Header
* Move Send to-row to send view and restyle
* Add "Recents" group to select recipient view
* Rename SendToRow to AddRecipient
* Basic UI and Layout
* New ENSInput component
* wip - fuzzy search for input
* small refactor
* Add Dialog
* contact list initial
* initial error on invalid address
* clean up edit
* Click to open modal
* Create AddToAddressBookModal component
* Modal styling and layout
* modal i18n
* Add to Addressbook
* ens wip
* ens wip
* ENS Resolution
* Reset input
* Send to explicit address
* Happy Path Complete
* Add back error checking
* Reset send-to when emptying input
* Add back warning object
* Fix linter
* Fix unit test #1 - fix import paths
* Remove dead tests
* One more to go
* Fix all unit tests
* add unit test for reducers and actions
* test rendering AddRecipient
* Add tests for dialog boxes in AddRecipient
* Add test for validating
* Fix linter
* Fix e2e tests
* Token send e2e fix
* Style View Contact
* Style edit-contact
* Fix e2e
* Fix from-import-beta-ui e2e spec
* Make section header say "add recipient” by default
* Auto-focus add recipient input
* Update placeholder text
* Update input title font size
* Auto advance to next step if user paste a valid address
* Ellipsify address when recipient is selected
* Fix app header background color on desktop
* Give each form row a margin of 16px
* Use .container/.component naming pattern for ens-input
* Auto-focus on input when add to addressbook modal is opened; Save on Enter
* Fix and add unit test
* Fix selectors name in e2e tests
* Correct e2e test token amount for address-book-send changes
* Adds e2e test for editing a transaction
* Delete test/integration/lib/send-new-ui.js
* Add tests for amount max button and high value error on send screen to test/e2e/metamask-ui.spec.js
* lint and revert to address as object keys
* add chainId based on current network to address book entry
* fix test
* only display contacts for the current network
* Improve ENS message when not found on current network
* Add error to indicate when network does not support ENS
* bump gaba
* address book, resolve comments
* Move contact-list to its own component
* De-duplicate getaddressbook selector and refactor name selection logic in contact-list-tab/
* Use contact-list component in contact-list-tab.component (i.e. in settings)
* Improve/fix settings headers for popup and browser views
* Lint fixes related to address book updates
* Add 'My accounts' page to settings address book
* Update add new contact button in settings to match floating circular design
* Improve styles of view contact page
* Improve styles and labels of the add-contact.component
* Further lint fixes related to address book updates
* Update unit tests as per address book updates
* Ensure that contact list groups are sorted alphabetically
* Refactor settings component to use a container for connection to redux; allow display of addressbook name in settings header
* Decouple ens-input.component from send context
* Add ens resolution to add contact screen in settings
* Switching networks when an ens address is shown on send form removes the ens address.
* Resolve send screen search for ensAddress to matching address book entry if it exists
* Show resolved ens icon and address if exists (settings: add-contact.component)
* Make the displayed and copied address in view-contact.component the checksummed address
* Default alias state prop in AddToAddressBookModal to empty string
* Use keyCode to detect enter key in AddToAddressBookModal
* Ensure add-contact component properly updates after QR code detection
* Fix display of all recents after clicking 'Load More' in contact list
* Fix send screen contact searching after network switching
* Code cleanup related to address book changes
* Update unit tests for address book changes
* Update ENS name not found on network message
* Add ens registration error message
* Cancel on edit mode takes user back to view screen
* Adds support for memo to settings contact list view and edit screens
* Modify designs of edit and view contact in popup environment
* Update settings content list UX to show split columns in fullscreen and proper internal navigation
* Correct background address book API usages in UI
`seedWords` used to be stored on the metamask state temporarily at
certain points. This hasn't been the case since #5994, but references
to this state remained. All of the logic remained for correctly updating
these `seedWords`, handling them during navigation, and scrubbing them
from the state.
However the state was never updated in practice. The `seedWords` are
still returned by `verifySeedPhrase`, and they're still stored in
component state in a few places. But they aren't ever set in the Redux
metadata state or the Preferences controller.
All references to this state have been removed, along with any logic
for interacting with this state. A few unused actions were removed as
well.
While working on #6805, I noticed that many variables were being used
before they were declared. Technically this worked fine in practice
because we were using the `transform-es2015-block-scoping` Babel plugin,
which transforms `let` and `const` to `var`, which is hoisted. However,
after removing that Babel transformation, many things broke.
All instances of variables or classes being used before declared have
been fixed.
The `no-use-before-define` eslint rule has been added to catch these
cases going forward. The rule is disabled for function declarations for
the moment, because those are always hoisted. We could disable that too
if we want to, but it's purely stylistic and would require a lot more
changes.
* transactions/pending - check nonce against the network and mark as dropped if not included in a block
* transactions/pending - unifiy "dropped" txs
* transactions/pending - test - fix for new expected behavior
* fix comment
* transactions/pending - clean up dropped event
* fix spelling
Co-Authored-By: frankiebee <frankie.diamond@gmail.com>
* nit fix
* test/tx-pending - clarify test description
* Set a default value for code in _determineTransactionCategory
* Adds e2e tests that fail when token txs without gas param are not properly handled.
* Adds unit tests for _determineTransactionCategory
* Base error throwing and simple gas setting in estimateTxGas on transactionCategory
* Add networks tab to settings, with header.
* Adds network list to settings network tab.
* Adds form to settings networks tab and connects it to network list.
* Network tab: form adding and editing working
* Settings network form properly handles input errors
* Add translations for settings network form
* Clean up styles of settings network tab.
* Add popup-view styles and behaviour to settings network tab.
* Fix save button on settings network form
* Adds 'Add Network' button and addMode to settings networks tab
* Lint fix for settings networks tab addition
* Fix navigation in settings networks tab.
* Editing an rpcurl in networks tab does not create new network, just changes rpc of old
* Fix layout of settings tabs other than network
* Networks dropdown 'Custom Rpc' item links to networks tab in settings.
* Update settings sidebar networks subheader.
* Make networks tab buttons width consistent with input widths in extension view.
* Fix settings screen subheader height in popup view
* Fix height of add networks button in popup view
* Add optional label to chainId and symbol form labels in networks setting tab
* Style fixes for networks tab headers
* Add ability to customize block explorer used by custom rpc
* Stylistic improvements+fixes to custom rpc form.
* Hide cancel button.
* Highlight and show network form of provider by default.
* Standardize network subheader name to 'Networks'
* Update e2e tests for new settings network form
* Update unit tests for new rpcPrefs prop
* Extract blockexplorer url construction into method.
* Fix broken styles on non-network tabs in popup mode
* Fix block explorer url links for cases when provider in state has not been updated.
* Fix vertical spacing of network form
* Don't allow click of save button on network form if nothing has changed
* Ensure add network button is shown in popup view
* Lint fix for networks tab
* Fix block explorer url preference setting.
* Fix e2e tests for custom blockexplorer in account details modal changes.
* Update integration test states to include frequentRpcList property
* Fix some capitalizations in en/messages.json
* Remove some console.logs added during custom rpc form work
* Fix external account link text and url for modal and dropdown.
* Documentation, url validation, proptype required additions and lint fixes on network tab and form.
* eslint: Check for unused function arguments
* eslint: Ignore unused '_' in argument list
Also allow any number of '_' e.g., '__' or '___' which is to be used sparingly
* Remove and rename unused arguments
* mm-controller - dont overwrite existing rpc settings
* ui-networkDropdown - dont pass old network as chainId
* add methods preferencesController.updateRpc and metamaskController.updateAndSetCustomRpc
* use updateAndSetCustomRpc in settings to allow rpcs to be updated
* use new rpc as nickname if no nick name has been supplied
* fix update rpc method
* Refactor and fix styling for first time flow. Remove seed phrase from persisted metamask state
* Fix linting and tests
* Fix translations, initialization notice routing
* Fix drizzle tests
* Fix e2e tests
* Fix integration tests
* Fix styling
* Fix migration naming from 030 to 031
* Open extension in browser when user has not completed onboarding
* Use selector for state.metamask.accounts in all cases.
* Default to cached balance when selecting metamask accounts
* Adds the cached-balances controller
* Documentation and small codes fixes for #5843
Co-Authored-By: danjm <danjm.com@gmail.com>
* Fix rounding issue when sending max tokens
* Ensure amount row shows exact amount of max tokens on send screen (#2)
* Fix tests
* Change stored redux value from BigNumber to hex string. Fix TokenInput default value
* Auto fail transactions that have been approved for over 12 hours
Converts txs using a migration.
This migration uses a new helper function that generates tx-failing
migrations, and only requires a version, error message, and condition to
run on each transaction.
* Linted
* Only migrate approved txs to failed
* Cleanup
* Cleanup
* Small lint fixes
* transactions - use safe-event-emitter over events
* tests - pass a platform object on init with a noop showTransactionNotification
* test - fix for tx-state-history-helper trying to reduce an empty array
* deps - safe-event-emitter
* lint
* Add beginning of test
* Resubmit approved transactions on new block
May fix#4343 and related issues, where an error could leave
transactions stranded in the approved state.
* Remove unused test
* Re-approve transactions when retrying approved
* Add retry approved test
* Include approved in pending tx count
* Fix getPendingTxs()
* Linted
* Only throw hash error in submitted state
* Only check submitted txs for block inclusion
* Fix test expectations
* Increase suggested gas percentile to 65
I keep submitting transactions then waiting a long time. Apparently 50th percentile isn't enough.
* Update test for getGasPrice
