* Migration 51: ensure chainId is set in network controller provider state for all infura/default networks
* Clean up
* Migrate incorrect as well as falsy chainIds
Co-authored-by: Erik Marks <rekmarks@protonmail.com>
Our automatic token detection was hard-coded to only work on our built-
in Infura Mainnet endpoint. It now works with custom Mainnet RPC
endpoints as well.
Relates to #6992
Ensures that `hideLoadingIndication` is always called in all actions that call `showLoadingIndication`. It's unclear how many of these actions were failing to hide the loading indication, because other actions superset `hideLoadingIndication`.
At the very least, `updateTransaction` was probably failing to hide the loading indication in the error case.
This PR also refactors a lot of actions to call `hideLoadingIndication` once in `finally` blocks as opposed to multiple times across `try` and `catch` blocks. We avoided making changes to functions using `Promise` methods, because `Promise.finally` is not supported by Waterfox, and it's not properly transpiled by Babel.
This update comes with a breaking change to the Approval controller. It
now requires a `defaultApprovalType` parameter.
I don't think we have any use for a default approval type, but I've
added a "NO_TYPE" one for now because it's a strict requirement. We
should consider making this parameter optional in the future, for cases
like this where it's not needed.
This update will hopefully address some caching issues we've been
seeing with our phishing configuration. See here for more details:
https://github.com/MetaMask/controllers/pull/297
This PR introduces the new approval controller to the extension codebase. We use it for the permissions controller's pending approval functionality.
The approval controller sets us up for a new pattern of requesting and managing user confirmations in RPC methods. Along with the generic RPC method middleware, the approval controller will allow us to eliminate our message managers, and decouple various method handlers from our provider stack, making the implementations more portable between the extension and mobile.
The Firefox e2e tests now use the `.zip` file for testing the
extension. We've found this to produce more similar results to
production, compared to the old method of loading the unzipped
directory.
Passing in a `.zip` file to the Chrome driver didn't seem to work. I
didn't investigate this further to see if it was possible, but I'm not
sure it makes a difference on Chrome anyway.
From a behavioral standpoint this PR fixes the issue with tracking, and persisting, tokens that the user hides. Whether we can/should optimize this to prevent duplicates of the accountHiddenTokens and hiddenToken is a point of contention, but it acts similiarly to how we track tokens and accountTokens.
Also to note, for tokens under a custom network there is no way to distinguish two different custom network sets of hidden tokens, they are all under the `rpc` property, same as accountTokens.
* @metamask/inpage-provider@^8.0.0
* Replace public config store with JSON-RPC notifications
* Encapsulate notification permissioning in permissions controller
* Update prefix of certain internal RPC methods and notifications
* Add accounts to getProviderState
* Send accounts with isUnlocked notification (#10007)
* Rename provider streams, notify provider of stream failures (#10006)
The `waitUntilCalled` utility now has a timeout. It will now throw an
error if the stub is not called enough times, rather than blocking
forever.
The return type had to be changed to a function, so that we could throw
when the timeout is triggered. I tried returning an error that rejected
first, but if you don't handle the error synchronously Node.js will
consider it to be an unhandled Promise rejected (even if it _is_
handled later on).
I worked around this by resolving in the timeout case as well, so that
there is never a "deferred" Promise exception in the timeout case. The
returned function re-throws the error if it's given. That way there is
never any unhandled Promise rejection.
* Migration to remove legacy local storage keys from localStorage
* Update app/scripts/migrations/050.js
Co-authored-by: Mark Stacey <markjstacey@gmail.com>
* Update app/scripts/migrations/050.js
Co-authored-by: Mark Stacey <markjstacey@gmail.com>
* Fix unit tests for migration 50
* Fixing stubbing and localstorage reference in migration 50
* Update test/helper.js
Co-authored-by: Mark Stacey <markjstacey@gmail.com>
Co-authored-by: Mark Stacey <markjstacey@gmail.com>
The metrics e2e test would fail if the segment events still weren't
dispatched when the page loaded. The Segment events are sent on a set
interval, so it isn't abnormal for them to lag behind the page load
itself. The `waitUntilCalled` utility has been used to wait until all
required events have been dispatched.
The `wait-until-called` module was converted to an ES5 module, so that
it could be used from an e2e test. The optional `callCount` parameter
has also been added, to allow waiting for more than one call.
The `segmentSpy` had to be converted to a `segmentStub`, to allow the
`waitUntilCalled` utility to be used.
The e2e test driver used to perform the initial navigation
automatically within the `buildWebDriver` function, so that that step
wouldn't need to be repeated at the beginning of each test. However
this prevented you from doing any setup in the test before the first
navigation.
The navigation has now been moved into each individual test. It should
be functionally equivalent, except now it's possible to control exactly
when the first navigation occurs.
A 1 second delay was also removed, as it didn't seem to be necessary
when testing this. It was initially added as an attempted fix to an
intermittent failure. It did not fix that failure.
* Remove use of ethgassthat; use metaswap /gasPrices api for gas price estimates
* Remove references to ethgasstation
* Pass base to BigNumber constructor in fetchExternalBasicGasEstimates
* Update ui/app/hooks/useTokenTracker.js
Co-authored-by: Erik Marks <25517051+rekmarks@users.noreply.github.com>
* Delete gas price chart
* Remove price chart css import
* Delete additional fee chart code
* Lint fix
* Delete more code no longer used after ethgasstation removal
Co-authored-by: Erik Marks <25517051+rekmarks@users.noreply.github.com>
The assertion ensuring that there were at least 3 metrics received
didn't end up being useful. If this assertion fails, it doesn't explain
what segment events _were_ received.
By removing this assertion and letting the later assertions catch this
case, we at least learn which of the three expected events were
present.
An e2e test has been added that uses the new mock Segment server to
verify that the three initial page metric events are sent correctly.
Using the mock Segment server requires a special build with this mock
Segment server hostname embedded, so a distinct job for building and
running this test was required. As such, it was left out of the
`run-all.sh` script.
* Freezeglobals: remove Promise freezing, add lockdown
* background & UI: temp disable sentry
* add loose-envify, dedupe symbol-observable
* use loose envify
* add symbol-observable patch
* run freezeGlobals after sentry init
* use require instead of import
* add lockdown to contentscript
* add error code in message
* try increasing node env heap size to 2048
* change back circe CI option
* make freezeGlobals an exported function
* make freezeGlobals an exported function
* use freezeIntrinsics
* pass down env to child process
* fix unknown module
* fix tests
* change back to 2048
* fix import error
* attempt to fix memory error
* fix lint
* fix lint
* fix mem gain
* use lockdown in phishing detect
* fix lint
* move sentry init into freezeIntrinsics to run lockdown before other imports
* lint fix
* custom lockdown modules per context
* lint fix
* fix global test
* remove run in child process
* remove lavamoat-core, use ses, require lockdown directly
* revert childprocess
* patch package postinstall
* revert back child process
* add postinstall to ci
* revert node max space size to 1024
* put back loose-envify
* Disable sentry to see if e2e tetss pass
* use runLockdown, add as script in manifest
* remove global and require from runlockdown
* add more memory to tests
* upgrade resource class for prep-build & prep-build-test
* fix lint
* lint fix
* upgrade remote-redux-devtools
* skillfully re-add sentry
* lintfix
* fix lint
* put back beep
* remove envify, add loose-envify and patch-package in dev deps
* Replace patch with Yarn resolution (#9923)
Instead of patching `symbol-observable`, this ensures that all
versions of `symbol-observable` are resolved to the given range, even
if it contradicts the requested range.
Co-authored-by: Mark Stacey <markjstacey@gmail.com>
A few inconsistencies in JSDoc formatting have been fixed throughout
the project. Many issues remain; these were just the few things that
were easy to fix with a regular expression.
The changes include:
* Using lower-case for primitive types, but capitalizing non-primitive
types
* Separating the parameter identifier and the description with a dash
* Omitting a dash between the return type and the return description
* Ensuring the parameter type is first and the identifier is second (in
a few places it was backwards)
* Using square brackets to denote when a parameter is optional, rather
than putting "(optional)" in the parameter description
* Including a type and identifier with every parameter
* Fixing inconsistent spacing, except where it's used for alignment
* Remove incorrectly formatted `@deprecated` tags that reference non-
existent properties
* Remove lone comment block without accompanying function
Additionally, one parameter was renamed for clarity.
* Alternative savings fix
* Further required changes to savings fix
* Further fix to savings calculations that properly accounts for metamask fees
* metaMaskFeeInEth property on quotes to decimal string
* Fix swaps controller unit tests
* Improve documentation in swaps controller
* Prevent getMedianEthValueQuote from mutation passed quotes array with .sort() call
* Another fix and refactor to savings calculations in _findTopQuoteAndCalculateSavings
Cleaner structuring of conditionals for setting tokenValueOfQuoteForSorting, ethValueOfQuote and metaMaskFeeInEth in swaps controller
Stop subtracting medianMetaMaskFee from savings, but include it in savings data
Another fix and refactor to savings calculations in _findTopQuoteAndCalculateSavings
* Add and update unit tests for _findTopQuoteAndCalculateSavings
* Improve calculation of overallValueOfQuoteForSorting for case where ETH is the source token
* Clean up getMedianEthValueQuote code, test and comments
* Clean up _findTopQuoteAndCalculateSavings, create test input and expected results helper functions
* Update getMedianEthValueQuote to account for multiple quotes with overall values equal to the median
* Add jsdoc comment for meansOfQuotesFeesAndValue
* Fix jsdoc comment for getMedianEthValueQuote
* create custom addHexPrefix function
* switch to custom addHexPrefix
Co-authored-by: Mark Stacey <markjstacey@gmail.com>
Co-authored-by: Erik Marks <rekmarks@protonmail.com>
Some of the unit tests for the incoming transaction controller included
a 1 second wait. The wait was to ensure that a state update did not
occur, as it happens asynchronously.
The tests work equally well using a `setTimeout` with a zero second
wait, because the asynchronous block update is guaranteed to have been
queued up by the time this timeout function is called. The timeout has
been reduced to `0` to speed up the tests.
Additionally, `undefined` has been added to the list of network names
used to construct the fake API responses. This is to ensure that the
API returns a valid response, so that the test fails when it should.
The incoming transactions controller now uses the `chainId` for the
current network instead of the `networkId`. This ensures that custom
RPC endpoints for the built-in supported networks do correctly receive
incoming transactions.
As part of this change, the incoming transactions controller will also
cease keeping track of the "last block fetched" for networks that are
not supported. This piece of state never really represented the last
block fetched, as _no_ blocks were fetched for any such networks. It
been removed.
Unit tests have been added to the incoming transactions controller to
ensure that block updates are correctly resulting in state updates when
incoming transactions are enabled. All other events that trigger state
updates are tested as well.
The tests were written to be minimally dependent upon implementation
details of the controller itself. `nock` was used to mock the API
response from Etherscan. Each event is triggered asynchronously by
`sinon`, as in production they are likely only triggered
asynchronously.
This was extracted from #9583
This PR includes a new `wait-until-called` module meant to help with
writing asynchronous tests. It allows you to wait until a stub has been
called.
The shared mocks used previously in the incoming transaction controller
tests have been replaced with functions that can generate a new mock
for each test.
We should avoid ever sharing mocks between tests. It's quite easy for
a mock to get accidentally mutated or not correctly "reset" for the
next test, leading to test inter-dependencies and misleading results.
In particular, it is unsafe to share a `sinon` fake (e.g. a spy or
stub) because they can't be fully reset between tests. Or at least it's
difficult to reset them property, and it can't be done while also
following their recommendations for preventing memory leaks.
The spy API and all related state can be reset with `resetHistory`,
which can be called between each test. However `sinon` also recommends
calling `restore` after each test, and this will cause `sinon` to drop
its internal reference to the fake object, meaning any subsequent call
to `resetHistory` would fail. This is intentional, as it's required to
prevent memory from building up during the test run, but it also means
that sharing `sinon` fakes is particularly difficult to do safely.
Instead we should never share mocks in the first place, which has other
benefits anyway.
This was discovered while writing tests for #9583. I mistakenly
believed that `sinon.restore()` would reset the spy state, and this was
responsible for many hours of debugging test failures.
This is a continuation of #9726, which did not fix the problem
described.
If the initial network when the extension is started is something other
than Mainnet, the swaps controller will never successfully retrieve
swap quotes. This is because `ethers` will continue to communicate
with whichever network the provider was initially on.
We tried fixing this by hard-coding the `chainId` to Mainnet's
`chainId` when constructing the Ethers provider, but this did not work.
I suspect this failed because the `provider` we pass to `ethers` is not
compliant with EIP 1193, as `ethers` doubtless expects it to be.
Instead the entire `ethers` provider is now reconstructed each time the
network changes. This mirrors the approach we take in some other
controllers.
If the initial network when the extension is started is something other
than Mainnet, the swaps controller will never successfully retrieve
swap quotes. This is because the `ethers` provider used by the swaps
controller doesn't allow network changes by default - it assumes that
the network remains the same as when the provider was initialized.
This was fixed by hard-coding Mainnet as the initial chain ID for this
`ethers` provider used by the swaps controller.
Some adjustments needed to be made to the `provider` stub to allow
setting `1` as the network ID and chain ID in unit tests.
The e2e test for the contract deposit action was unnecessarily reliant
upon timing. After initiating a deposit, it would grab the first
transaction in the transaction list and assume it was the deposit that
it had just initiated. If it looked prior to the unapproved transaction
being added to the list, it would grab the wrong transaction.
It now looks specifically for _unconfirmed_ transactions, meaning it
will block until the deposit transaction is rendered.
This was discovered in testing a test-dapp PR:
https://github.com/MetaMask/test-dapp/pull/76
Refs #9663
See [`node/no-deprecated-api`][1] for more information.
This change enables `node/no-deprecated-api` and fixes the issues raised by the rule.
[1]:https://github.com/mysticatea/eslint-plugin-node/blob/v11.1.0/docs/rules/no-deprecated-api.md
The change to the way that `punycode` is imported is to address the fact that
third-party module is hidden by the built-in. This is a silly hack but it works.
`@metamask/eslint-config` has been updated to v4.1.0. This update
requires that we update `eslint` to v7 as well, which in turn requires
updating most `eslint`-related packages.
Most notably, `babel-eslint` was replaced with `@babel/eslint-parser`,
and `babel-eslint-plugin` was replaced by `@babel/eslint-plugin`. This
required renaming all the `babel/*` rules to `@babel/*`.
Most new or updated rules that resulted in lint errors have been
temporarily disabled. They will be fixed and re-enabled in subsequent
PRs.
* Calculate savings per swap relative to median values
* Update test mock quotes, add getMedian tests
* Identify assets by sourceToken and destinationToken
* Delete CachedBalancesController.cachedBalances
* Migrate provider to Rinkeby instead of deleting it
* Convert hex transaction metamaskNetworkId values to decimal
* Don't migrate provider state in e2e tests
* Don't kick custom RPC users to Rinkeby unnecessarily
* Use provider.chainId for address book chainId values
* Add address book migration
* Fix failing unit test
* fixup! Merge branch 'develop' into address-book-use-chainId
* Select address book entries for display by chainId
* Merge all address book entry keys
* fixup! Merge all address book entry keys
* Delete localhost provider type
* Use ganache-cli default chain ID for tests
* Delete unused test firstTimeState variable
* Migrate default ganache-cli network to frequentRpcListDetail
* Add default test provider state
* Add test functionality to createJsonRpcClient
* Lint locales
* Update test middleware creation
* fixup! Update test middleware creation
* Use initial transaction for settings swap transaction title params, and remove addition of swap properties to cancel transcations
* Update unit test data
* Use token symbol properties from initial transaction for filitering in transaction list
* Only shows the swaps intro popup on mainnet
* Remove code that closes swaps popup from e2e tests
* correct casing on isMainnet prop in home component
* Create wrapper function for segment events
* Extract transaction controller metrics calls into own function
Co-authored-by: Mark Stacey <markjstacey@gmail.com>
* Stop passing a gas param to the estimateGas call initiated in the swaps controller timedoutGasReturn
* Stop passing gas params to timedoutGasReturn
* Lint fix
* Stop passing no longer used param to setInitialGasEstimate
When the `chainId` for a custom RPC endpoint is edited, we now migrate
the corresponding address book entries to ensure they are not orphaned.
The address book entries are grouped by the `metamask.network` state,
which unfortunately was sometimes the `chainId`, and sometimes the
`networkId`. It was always the `networkId` for built-in Infura
networks, but for custom RPC endpoints it would be set to the user-set
`chainId` field, with a fallback to the `networkId` of the network.
A recent change will force users to enter valid `chainId`s on all
custom networks, which will be normalized to be hex-prefixed. As a
result, address book contacts will now be keyed by a different string.
The contact entries are now migrated when this edit takes place.
There are some edge cases where two separate entries share the same set
of contacts. For example, if two entries have the same `chainId`, or if
they had the same `networkId` and had no `chainId` set. When the
`chainId` is edited in such cases, the contacts are duplicated on both
networks. This is the best we can do, as we don't have any way to know
which network the contacts _should_ be on.
The `typed-message-manager` unit tests have also been updated as part
of this commit because the addition of `sinon.restore()` to the
preferences controller tests ended up clearing a test object in-between
individual tests in that file. The test object is now re-constructed
before each individual test.
* Remove network config store
* Remove inline networks variable in network controller
* Re-key network controller 'rpcTarget' to 'rpcUrl'
* Require chainId in lookupNetwork, implement eth_chainId
* Require chain ID in network form
* Add alert, migrations, and tests
* Add chainId validation to addToFrequentRpcList
* Update public config state selector to match new network controller
state
* Use network enums in networks-tab.constants
* Ensure chainId in provider config is current
* Update tests
JSON files are now sorted by key with `prettier`, using the plugin
`prettier-plugin-sort-json`. This does not affect `package.json`
because `prettier` uses a special parser for that file, as it has
a more restrictive format than JSON.
Instead of using `eslint-plugin-json` for linting JSON files,
`prettier` is now used. `prettier` is capable of detecting and
correcting more problems than `eslint-plugin-json` can, such as
indentation.
All JSON files have been run through `prettier`. The changes are all
superficial.
* Use verifyPassword instead of submitPassword when exporting priv key
Fixes#9287 which was when submitPassword is called will fully clear the keyring state
https://github.com/MetaMask/KeyringController/blob/master/index.js#L155ad823d0ac1/index.js (L562)ad823d0ac1/index.js (L726)
Also, pass hideWarning action prop so it will clear the appState.warning if a correct password is never provided on componentWillUnmount
* Hide Warning on componentWillUnmount
* Update exportAccount tests to verifyPassword
* Update ui/app/store/actions.js
Co-authored-by: Mark Stacey <markjstacey@gmail.com>
* Remove mountWithStore enzyme component wrapper in favor for renderWithProvider testing-library/react for tests
Change dropdown component tests to testing-library/react
* Add react-testing-library
Adds react-testing-library as a dependency, creates a wrapper function with Provider store/I18n context support, and implements it in unconnected-account-alert.
* Refactor renderWithProvider store to extra param, instead of component prop store
* Clear Account Details in AppState
We store sensitive information in the AppState under accountDetail for when the modal is active and present. This adds a new action/reducer and componentWillUnmount to clean up the persisted data left after leaving the modal.
* Remove reduntant clearAccountDetails call when clicking done button
* Fix require-unicode-regexp issues
See [`require-unicode-regexp`](https://eslint.org/docs/rules/require-unicode-regexp) for more information.
This change enables `require-unicode-regexp` and fixes the issues raised by the rule.
* Remove case-insensitive flag from regexps
This change fixes the `_validateERC20AssetParams` tests, ensuring that the given
options are all valid except those that are being tested. Previously the `symbol`
property was invalid _in addition to_ the `decimals` property.
This one gets a bit more complicated because the styles were interwoven and needed to be untangled to be moved. Essentially, though, the goal is to put the styles where they make the most sense and colocate them with their components.
This migration had referred to the non-existent
`TransactionsController` instead of `TransactionController`, so it
effectively did nothing. Now it should work.
This migration hasn't been included in any release yet, so we can fix
it in-place instead of adding an additional corrected migration.
The migration comment has also been updated, as it was inaccurate.
The remaining integration tests are all covered by e2e tests, so
they're no longer needed.
All associated scripts, fixtures, and dependencies have also been
removed.
This tests the `personal_sign` method using the test dapp. This test
reflects part of the `confirm-sig-requests` integration test, which
tests the confirmation of a `personal_sign` signature request.
A `data-testid` prop was added to the 'Sign' button on the signature
request confirmation page, to make it easier to select the 'Sign'
button reliably.
This updated test dapp has a new `personal_sign` button. It also fixes
the `Encrypt` button, which was broken in `v3.0.0`.
The `signature-request` e2e test needed to be updated to find the
'Sign' button by id rather than by text, since there are now two
buttons with the text 'Sign'.
The `withFixtures` helper function now has the option of starting the
test dapp as well. It will wait to ensure it has started up correctly,
and it'll shut it down when the test ends.
This test mirrors the `localization` integration test. It only tests
the display of fiat currency on the home page, and it only tests one
currency (`php`).
Both the primary and secondary balance components on `EthOverview` now
have `data-testid` props, so that they can be more easily referenced in
e2e tests.
This required the addition of a `data-testid` prop to the component
`UserPreferencedCurrencyDisplay`, which is passed through to the
underlying `CurrencyDisplay` component.
The e2e test helper function `withFixtures` now includes verbose
reporting on failure. Whenever a test fails, debugging information will
be saved to disk, just as with the other e2e test modules.
e2e test that use the `withFixtures` helper now check for console
errors after each successful test. If any errors are found, the test
fails.
It's currently enabled for Chrome only, because the Firefox driver
throws an error when you attempt to get the browser logs. Not sure why
exactly, but it's a long-standing problem.
The webdriver method `verboseReportOnFailure` had previously taken a
single parameter, `test`, which was an object representing the current
Mocha test. However, only one property was used (`title`).
Instead the `title` is now passed through directly. This was done to
make this function easier to use outside of a Mocha context.
It seems that this blocklist checker never worked correctly. Ever since
the initial commit, it was comparing the Number `1` to the `networkId`,
which is a string. Additionally, even if it did throw, the transaction
continued unhindered. The user could still approve it, and there was no
indication shown to the user that anything went wrong. Also some of the
blocklist entries were incorrectly mixed-case, and were never hit.
We can remove this for now, and re-add it later on after we rewrite the
transaction controller.
The `metamaskNetworkId` property in the `txMeta` for incoming
transactions was incorrectly set as a Number instead of a String. This
change was made accidentally as part of #8627.
As a result incoming transactions were being excluded from the
transaction list, as they didn't have a matching network ID.
`metamaskNetworkId` is now set to a string, and a migration has been
added to ensure `metamaskNetworkId` is converted to a string for any
incoming transactions in state.
The 'Expand view' button in the 'Account Options' menu was still being
shown on the fullscreen UI. This button is not useful in fullscreen, as
all it does is open the fullscreen UI. It is now hidden on the
fullscreen UI.
Imported accounts can be removed, but the permissions controller is not
informed when this happens. Permissions are now removed as part of the
account removal process.
Additionally, the `getPermittedIdentitiesForCurrentTab` selector now
filters out any non-existent accounts, in case a render occurs in the
middle of an account removal.
This was resulting in a render crash upon opening the popup on a site
that was connected to the removed account.
'Activity' is a better name for this tab because it contains more than
just transactions. Signature requests are also included, and more non-
transaction activity may be included in the future.
