* Add lint:shellcheck:package
* Add double quote as per jq suggestion
* Use single quotes
* Ignore SC2016
* Use shellcheck script
* Set some flags
* Put shellcheck --version on new line
* Disable SC2016 (singe quotes is actually what we want here)
This rule prevents using an async function as a Promise executor (e.g.
as the argument to a `Promise` constructor). This pattern is usually a
mistake because it implies that the Promise constructor was not
necessary in the first place. It also makes error handling difficult,
as any errors thrown would be uncaught unless you wrap the body in a
try/catch block.
* Add support for one-click onboarding
MetaMask now allows sites to register as onboarding the user, so that
the user is redirected back to the initiating site after onboarding.
This is accomplished through the use of the `metamask-onboarding`
library and the MetaMask forwarder.
At the end of onboarding, a 'snackbar'-stype component will explain to the
user they are about to be moved back to the originating dapp, and it will
show the origin of that dapp. This is intended to help prevent phishing
attempts, as it highlights that a redirect is taking place to an untrusted
third party.
If the onboarding initiator tab is closed when onboarding is finished,
the user is redirected to the onboarding originator as a fallback.
Closes#6161
* Add onboarding button to contract test dapp
The `contract-test` dapp (run with `yarn dapp`, used in e2e tests) now
uses a `Connect` button instead of connecting automatically. This
button also serves as an onboarding button when a MetaMask installation
is not detected.
* Add new static server for test dapp
The `static-server` library we were using for the `contract-test` dapp
didn't allow referencing files outside the server root. This should
have been possible to work around using symlinks, but there was a bug
that resulted in symlinks crashing the server.
Instead it has been replaced with a simple static file server that
will serve paths starting with `node_modules` from the project root.
This will be useful in testing the onboarding library without vendoring
it.
* Add `@metamask/onboarding` and `@metamask/forwarder`
Both libraries used to test onboarding are now included as dev
dependencies, to help with testing. A few convenience scripts
were added to help with this (`yarn forwarder` and `yarn dapp-forwarder`)
* Add shellcheck lint script
* Add to build
* Add shellcheck lint to main lint task
* Put shellcheck in the right place, hopefully?
* Fix declared multiple executor types
* Add sudo
* Address shellcheck warnings
* Add test-lint-shellcheck
* Add test-lint-shellcheck to workflow
* Use correct lint task
* output version which could be helpful for debugging
* Address PR feedback
* consistency++
* Delete unused code
* Run threebox imports through migrations
* Remove 3box feature flag
* Remove unnecessary use of 'type' in threebox._updatePlugin
* Fix threebox controller getLastUpdated
* Turn off threebox by default
* Rename restoredFromThreeBox to showRestorePrompt
* Remove accientally added method from threebox controller
* Restore from threebox on import from unlock screen
* Throw on non 404 errors from Box.getconfig in new3Box
* ci - install deps - limit install scripts to those needed for build
* Update .circleci/scripts/deps-install.sh
Co-Authored-By: Mark Stacey <markjstacey@gmail.com>
* ci - install deps - expand install scripts needed for tests
* ci - install deps - expand install scripts needed for integration tests
* ci - install deps - fix node-sass script ref
* github - set codeowners for scripts/deps-install
* development - add utility to show deps with install scripts
* lint fix
* deps - move read-installed to devDeps
* Adds ab test controller with a fullScreenVsPopup test
* Add migration for fullScreenVsPopup state
* Move abtest state under an 'abtests' object.
* MetaMask shows fullScreen group of a/b test unapproved txs in a full browser tab
* Ensure cancel metrics event in confirm-transaction-base.component.js is sent in all cases
* Switch to existing tab for unapproved tx if it exists when opening in full screen
* Send metrics event for entering a/b test from confirm screen
* Fix lint, unit and integration tests related to a/b test code
* Remove unnecessary tabs.query call in triggerUiInNewTab
* Add '--quiet' flag to verify locales script
The `--quiet` flag reduces the console output to just the essential
information for running in a CI environment. For each locale, it will
print the number of unused messages (if any).
* Add `verify-locales` script to lint CI job
The locales are now verified as part of the lint CI job. Any unused
messages detected will result in the job failing.
* Switch to using string literals for locale keys
Various message keys were being specified with a string template
instead of a string literal. They have been switched to use string
literals so that the script for detecting unused messages can find
them.
* Remove unused locale messages
A number of unused locale messages have been removed - probably
leftover from old UI elements that have since been removed.
The `verify_locale_strings` script has been augmented to search the UI
for string literals, and match those against the locale message keys in
the `en` locale. Any messages without a corresponding string literal
are assumed to be unused.
The script has also been updated with an optional `--fix` parameter,
which will automatically delete any unused messages from locales.
148 unused messages were found in this case, out of a total of about
650 messages. Another 70 messages are _potentially_ unused and require
further investigation, but weren't as easy to rule out because they
were found in string literals.
* Remove additional unused locale messages
The following messages were more difficult to rule out because they
were present as string literals in the UI. They do appear to be
unused as locale keys though.
* Adds threebox controller
* Adds threebox approval modal
* Fix unit tests and lint after addition of threebox
* Correct threebox behaviour after rejecting request for backup; fixes e2e tests.
* Update threebox controller for automatic syncing
* Ensure frontend locale updates when preferences are changed via direct update within controller
* Add toggle in settings for 3box syncing
* Update threebox controller for latest 3box version
* Delete unnecessary frontend changes for threebox integration
* Backing up address book contacts with threebox
* Update unit tests for 3box-integration additions
* Only enable threebox by default for new wallets
* Mock globals for correct unit tests
* 3box '1.10.2' -> '^1.10.2'
* Correct capilalization on 3Box
* Use log.debug instead of console.log in threebox controller
* Update yarn.lock
* Remove edge build
* Split 3box module into background deps js file
* extra bundle opts for bg-libs
* sync yarn.lock
* new3Box logic
* Show confirm threebox restore after import
* Remove bg-libs.js from manifest file for dev builds
* Switch 3Box controller to using the spaces api (instead of the profile api)
* Finalize switching to spaces api and only restoring from 3box after import
* Update metamask-controller-test.js for threebox controller changes
* Make threebox modal style consistent with others and update success button wording
* Use mock 3box when in test
* Correct 3box modal header
* Remove unnecessary property of threebox controller provider
* Remove unnecessary method calls after restoration from 3box in the threebox-restore-confirm modal.
* Replace setThreeBoxSyncingPermission calls in routes/index.js with turnThreeBoxSyncingOn
* Replace erroneous use of with
* Replace erroneous use of threeboxSyncing with threeBoxSyncingAllowed in advancted-tab directory
* Lint fixes for 3box changes
* Log errors encountered when updating 3Box
* Remove unnecessary parameter from state update
* Add timeout to initial 3Box sync
The initial 3Box sync will now timeout after 1 minute. If the timeout
is triggered, 3Box is disabled and cannot be re-enabled unless the
initial sync does finally finish. If it never finishes, 3Box cannot
be enabled unless the extension is reinstalled.
The Advanced Settings page was updated to show this option as disabled
in that circumstance, with a new discription explaining why it's
disabled. The UI here could certainly be improved.
Additionally, "on" and "off" labels were added to the toggle to match
the other toggles on the Advanced Settings page.
* Use non-minified 3Box module
We had previously used the minified 3Box module to avoid a build error
encountered when `envify` was processing the `libp2p` module (which is
used by 3Box). The build would fail because `esprima` (used by `envify`)
is incompatible with the object spread/rest operator (which is used in
`libp2p`).
That issue has been solved by adding a global Babelify transformation
specifically for transpiling out the object rest/spread operator from
dependencies. It has been targetted to only affect `libp2p` to avoid
extending the build time too much. This workaround can be used until
a new version of `esprima` is released that includes this bug fix.
* Use app key addresses for threebox
* Replace use of modal for confirming 3box restoration with a home notification
* Adds e2e tests for restoring from threebox
* Update eth-keyring-controller to 5.1.0
* Correct parameters passed to getAppKeyAddress in threebox.js
* Add prefix to origin passed to getAppKeyAddress in threebox.js
* Remove unused locale message.
* Prevent CORS errors in firefox e2e tests
* Ensure extraneous scripts are excluded from the local test dev build
* Move threeBoxLastUpdate state from home.component to redux
* Threebox PR code cleanup
* Always use first address when initializing threebox
* Replace setRestoredFromThreeBox api with setRestoredFromThreeBoxToFalse and setRestoredFromThreeBoxToTrue
* Update development/metamaskbot-build-announce.js to include ui-libs and bg-libs in hard coded bundle list
* Update test/e2e/threebox.spec.js to use new helpers added with pull #7144
* Make setFeatureFlag available on the ui window during testing
* Hide threebox feature behind a feature flag that can only be activated via dev console
* Remove unnecessary migration of threebox feature flag
* Prevent this.init() call in threebox constructor if feature flag is not turned on
* Prevent threebox notification from showing if feature flag is falsy
* http://localhost/8889 -> http://localhost/* in gulp manifest:testing tasks
* ci - create source-map-explorer build-artifacts
* ci - add source-map-explorer builds to metamaskbot comment
* lint fix
* ci - source-map-explorer - include all bundles
* Add extra locales to index.json
* Fix verify locale script bugs
- All locales didn't work because it was putting an object inside of an object.
- Individual checks didn't work because of how the destructuring was done.
- Extra items were being printed as missing items.
* Sync up string changes w/ Brave wallet
* Add 33 new locales from Brave wallet
* Merge tml into ta code
As a solution to the constant lockfile churn issues we've had with
`npm`, the project now uses `yarn` to manage dependencies.
The `package-lock.json` file has been replaced with `yarn.lock`, which
was created using `yarn import`. It should approximate the contents of
`package-lock.json` fairly well, though there may be some changes due to
deduplication. The codeowners file has been updated to reference this
new lockfile.
All documentation and npm scripts have been updated to reference `yarn`
rather than `npm`. Note that running scripts using `npm run` still works
fine, but it seemed better to switch those to `yarn` as well to avoid
confusion.
The `npm-audit` Bash script has been replaced with `yarn-audit`. The
output of `yarn audit` is a bit different than `npm audit` in that it
returns a bitmask to describe which severity issues were found. This
made it simpler to check the results directly from the Bash script, so
the associated `npm-audit-check.js` script was no longer required. The
output should be exactly the same, and the information is still sourced
from the same place (the npm registry).
The new `yarn-audit` script does have an external dependency: `jq`.
However, `jq` is already assumed to be present by another CI script, and
is present on all CI images we use. `jq` was not added to `package.json`
as a dependency because there is no official package on the npm
registry, just wrapper scripts. We don't need it anywhere exept on CI
anyway.
The section in `CONTRIBUTING` about how to develop inside the
`node_modules` folder was removed, as the advice was a bit dated, and
wasn't specific to this project anyway.
The CSS is now served as an external file instead of being injected.
This was done to improve performance. Ideally we would come to a middle
ground between this and the former behaviour by injecting only the CSS
that was required for the initial page load, then lazily loading the
rest. However that change would be more complex. The hope was that
making all CSS external would at least be a slight improvement.
Performance metrics were collected before and after this change to
determine whether this change actually helped. The metrics collected
were the timing events provided by Chrome DevTools:
* DOM Content Loaded (DCL) [1]
* Load (L) [2]
* First Paint (FP) [3]
* First Contentful Paint (FCP) [3]
* First Meaningful Paint (FMP) [3]
Here are the results (units in milliseconds):
Injected CSS:
| Run | DCL | L | FP | FCP | FMP |
| :--- | ---: | ---: | ---: | ---: | ---: |
| 1 | 1569.45 | 1570.97 | 1700.36 | 1700.36 | 1700.36 |
| 2 | 1517.37 | 1518.84 | 1630.98 | 1630.98 | 1630.98 |
| 3 | 1603.71 | 1605.31 | 1712.56 | 1712.56 | 1712.56 |
| 4 | 1522.15 | 1523.72 | 1629.3 | 1629.3 | 1629.3 |
| **Min** | 1517.37 | 1518.84 | 1629.3 | 1629.3 | 1629.3 |
| **Max** | 1603.71 | 1605.31 | 1712.56 | 1712.56 | 1712.56 |
| **Mean** | 1553.17 | 1554.71 | 1668.3 | 1668.3 | 1668.3 |
| **Std. dev.** | 33.41 | 33.43 | 38.16 | 38.16 | 38.16 |
External CSS:
| Run | DCL | L | FP | FCP | FMP |
| :--- | ---: | ---: | ---: | ---: | ---: |
| 1 | 1595.4 | 1598.91 | 284.97 | 1712.86 | 1712.86 |
| 2 | 1537.55 | 1538.99 | 199.38 | 1633.5 | 1633.5 |
| 3 | 1571.28 | 1572.74 | 268.65 | 1677.03 | 1677.03 |
| 4 | 1510.98 | 1512.33 | 206.72 | 1607.03 | 1607.03 |
| **Min** | 1510.98 | 1512.33 | 199.38 | 1607.03 | 1607.03 |
| **Max** | 1595.4 | 1598.91 | 284.97 | 1712.86 | 1712.86 |
| **Mean** | 1553.8025 | 1555.7425 | 239.93 | 1657.605 | 1657.605 |
| **Std. dev.** | 29.5375 | 30.0825 | 36.88 | 37.34 | 37.34 |
Unfortunately, using an external CSS file made no discernible improvement
to the overall page load time. DCM and L were practically identical, and
FCP and FMP were marginally better (well within error margins).
However, the first paint time was _dramatically_ improved. This change
seems worthwhile for the first paint time improvement alone. It also
allows us to delete some code and remove a dependency.
The old `css.js` module included two third-party CSS files as well, so
those have been imported into the main Sass file. This was easier than
bundling them in the gulpfile.
The resulting CSS bundle needs to be served from the root because we're
using a few `@include` rules that make this assumption. We could move
this under `/css/` if desired, but we'd need to update each of these
`@include` rules.
Relates to #6646
[1]: https://developer.mozilla.org/en-US/docs/Web/Events/DOMContentLoaded
[2]: https://developer.mozilla.org/en-US/docs/Web/Events/load
[3]: https://developers.google.com/web/fundamentals/performance/user-centric-performance-metrics
These files were referencing npm scripts that no longer existed. Notices
appear to no longer exist, and the `ui-dev.js` module is no longer
actively used.
The `mock-dev.js` module is still used for certain integration tests, so
I've just removed the reference to the non-existent script.
We've been using the `eslint-plugin-json` plugin for some time, but we
haven't been visiting `.json` files in the lint script. The lint script
has now been updated to incude `.json` files, which means any invalid
JSON will result in a lint error.
Unfortunately this JSON plugin doesn't seem to apply the other eslint
rules (such as `key-spacing`) to the JSON files. I wasn't able to find a
way to get that to work. Instead I manually auto-formatted each of the
locale `message.json` files, which fixed many whitespace
inconsistencies.
The `states.json` file was deleted completely, as it appears to be
unused. It wasn't a valid JSON file anyway, it was JavaScript. It looks
like a `states.js` file is automatically generated, but an old copy was
accidentally saved as `states.json` and included in the repo.
Many duplicate key errors were found and fixed in the
`development/states/` JSON files.
`package-lock.json` was added to `.eslintignore` because it was very
slow to lint, and linting it doesn't provide much value.
The AppVeyor configuration appears to be unused - this project is not
connected to AppVeyor.
After deleting the AppVeyor config, the JSDoc config was the last thing
in the `development/tools` directory. That felt a little silly, so I
moved it up to `development`.
* Add React and Redux DevTools
* Conditionally load react-devtools
* Add start:dev npm script to run the app with devtools
Co-Authored-By: Mark Stacey <markjstacey@gmail.com>
* Improve auto changelog script
The auto changelog script was creating empty or invalid entries in a
number of different cases, such as when the body of a commit spanned
multiple lines. This has been fixed, and the following additional
improvements have been made:
- Error handling (it will now crash upon encountering an error)
- Commits without a PR number in the subject are listed without the PR
prefix
- Invalid shellcheck warnings ignored
- Only the first line of the commit body is shown
- Carriage returns are stripped (some commits contain them)
This script should be more reliable for helping to manually update the
changelog. It's still not sufficiently robust to use as part of an
automated process - I don't think that's feasible without maintaining
stricter control over commit messages conventions and/or merge
strategies.
* Remove unused state 'gas.basicPriceAndTimeEstimates'
* Check for invalid estimates from local storage
Gas estimates were being cached in local storage then later retrieved,
but the retrieved values were not being checked. If the data failed to
save, failed to load, or was cleared since being saved, it would result
in the gas estimates being set to undefined.
The estimates retrieved from local storage are now checked before they
are used. If they are falsy, the estimates are retrieved from the
network instead.
This should fix this Sentry issue:
[METAMASK-6W0T](https://sentry.io/share/issue/cfe470314a5741768b19050815322aa4/)
A few additional changes were made to the gas-duck tests to accommodate
the use of `sinon.restore`. `restore` is strongly recommended by the
`sinon` team, as neglecting to use it can result in memory leaks. It has
the additional benefit of ensuring you create fresh stubs/spies for each
test, which means they no longer need to be reset between tests.
* Introduce delay for eth_estimateGas calls with in test
* Add test that fails when gas estimates of contract method calls without gas are too high.
* Get transaction gas data from unApprovedTxs instead of confirmTransaction
* Fix selection of gas data in gas-modal-page-container.container
* Lint changes related to Version-6.7.2-gasLimitFix
* Fix e2e tests on Version-6.7.2-gasLimitFix
* Fix unit and integration tests for changes from Version-6.7.2-gasLimitFix
* more e2e fixes
* Add assertions for transaction values on confirm screen
* Fix display of transaction amount on confirm screen.
* Introduce delay for eth_estimateGas calls with in test
* Add test that fails when gas estimates of contract method calls without gas are too high.
* Get transaction gas data from unApprovedTxs instead of confirmTransaction
* Fix selection of gas data in gas-modal-page-container.container
* Lint changes related to Version-6.7.2-gasLimitFix
* Fix e2e tests on Version-6.7.2-gasLimitFix
* Fix unit and integration tests for changes from Version-6.7.2-gasLimitFix
* more e2e fixes
* Add assertions for transaction values on confirm screen
* Fix display of transaction amount on confirm screen.
* Add networks tab to settings, with header.
* Adds network list to settings network tab.
* Adds form to settings networks tab and connects it to network list.
* Network tab: form adding and editing working
* Settings network form properly handles input errors
* Add translations for settings network form
* Clean up styles of settings network tab.
* Add popup-view styles and behaviour to settings network tab.
* Fix save button on settings network form
* Adds 'Add Network' button and addMode to settings networks tab
* Lint fix for settings networks tab addition
* Fix navigation in settings networks tab.
* Editing an rpcurl in networks tab does not create new network, just changes rpc of old
* Fix layout of settings tabs other than network
* Networks dropdown 'Custom Rpc' item links to networks tab in settings.
* Update settings sidebar networks subheader.
* Make networks tab buttons width consistent with input widths in extension view.
* Fix settings screen subheader height in popup view
* Fix height of add networks button in popup view
* Add optional label to chainId and symbol form labels in networks setting tab
* Style fixes for networks tab headers
* Add ability to customize block explorer used by custom rpc
* Stylistic improvements+fixes to custom rpc form.
* Hide cancel button.
* Highlight and show network form of provider by default.
* Standardize network subheader name to 'Networks'
* Update e2e tests for new settings network form
* Update unit tests for new rpcPrefs prop
* Extract blockexplorer url construction into method.
* Fix broken styles on non-network tabs in popup mode
* Fix block explorer url links for cases when provider in state has not been updated.
* Fix vertical spacing of network form
* Don't allow click of save button on network form if nothing has changed
* Ensure add network button is shown in popup view
* Lint fix for networks tab
* Fix block explorer url preference setting.
* Fix e2e tests for custom blockexplorer in account details modal changes.
* Update integration test states to include frequentRpcList property
* Fix some capitalizations in en/messages.json
* Remove some console.logs added during custom rpc form work
* Fix external account link text and url for modal and dropdown.
* Documentation, url validation, proptype required additions and lint fixes on network tab and form.
* eslint: Check for unused function arguments
* eslint: Ignore unused '_' in argument list
Also allow any number of '_' e.g., '__' or '___' which is to be used sparingly
* Remove and rename unused arguments
