The `@include Paragraph` was added in one of the typography PRs but I believe it was intended for the token options text, not the icon. I believe the Paragraph only applies to text like everywhere else in the UI and this should be safe to remove from the icon to display the font-family from Font Awesome.
We now use string literals for all transaction category localized
messages. This makes it easier to verify that we have translations for
each of them, and that we aren't leaving any unused translations around.
* Update standard swaps build quote screen token verification message
* Add actionable warning token verification message to swaps build quote screen
* Simplify swapTokenVerification translations
* Use original verifyThisTokenOn message instead of swapsConfirmTokenAddressOnEtherscan
* Restore verifyThisTokenOn message to hi locale
* Support type and the withRightButton option as parameters on the actionable message component
* Use 'continue' in place of swapPriceDifferenceAcknowledgementNoFiat message
* Use wrapperClassName property on infotooltip in actionable-message
* Remove unnecessary change
* Lint fix
Fixes#5611
The origin that suggests a transaction is now shown on the transaction
confirmation page. If the transaction was initiated from within
MetaMask (e.g. via the 'Send' flow or swaps), no origin is shown.
This was based upon designs that were linked in the PR #9377. This is a
temporary measure until our newer transaction confirmation designs can
be implemented.
The decrupt message confirmation UI will crash if the origin metadata
is not present. This PR makes the UI tolerant of that metadata being
missing. It was always intended to be optional anyway.
Fixes#9244
When trying to connect a Trezor account on a fresh install of MetaMask,
the radio buttons on the account selection page would not respond to
being clicked.
When debugging this, it looks like the `onChange` event was never
triggered. A radio `<input>` element should trigger `onChange` whenever
the selection state change, but seemingly this wouldn't happen if the
change in selection state was undone during the same render cycle. If
I paused at a breakpoint during the render, I could see the checkbox
get selected then unselected again without triggering `onChange`.
The simplest fix was to use `onClick` instead of `onChange`. This seems
more appropriate anyway because we're treating the radio button as a
controlled component here, so the state of the underlying element isn't
really of any concern.
The "Next nonce" warning warns users when the custom nonce they set is
higher than our suggested nonce. This warning was mistakenly being
shown even when we didn't have a suggested nonce yet.
Fixes#9989
Additional validation was added in #9907 to ensure that the "Known
contract address" warning was shown when sending tokens to another
token address after switching assets on the Send screen. Unfortunately
this change had the unintended side-effect of preventing _all_ token
sends after switching assets, so long as the recipient was not an
internal address.
The problem is that the `validate` function expects to be passed the
address of the token send recipient in the case where a token is
selected. Instead the token address was being passed to the validate
function.
The `query` state is now used, which should always contain the
recipient address. This is the same state used in the only other place
the `validate` function is called.
The TokenList component on the `add-token` page had the name `InfoBox`,
which doesn't seem applicable. It has been renamed to `TokenList`, to
match the module filename and the component name we use elsewhere.
* Remove use of ethgassthat; use metaswap /gasPrices api for gas price estimates
* Remove references to ethgasstation
* Pass base to BigNumber constructor in fetchExternalBasicGasEstimates
* Update ui/app/hooks/useTokenTracker.js
Co-authored-by: Erik Marks <25517051+rekmarks@users.noreply.github.com>
* Delete gas price chart
* Remove price chart css import
* Delete additional fee chart code
* Lint fix
* Delete more code no longer used after ethgasstation removal
Co-authored-by: Erik Marks <25517051+rekmarks@users.noreply.github.com>
Our Storybook dependencies have been updated to v6.1.9, from v5. This
was done to address a security vulnerability in a transitive dependency
of these packages (`highlight.js`).
The primary changes required by this Storybook update were the change
in import path for the `withKnobs` hook, the change in background
config format, and the webpack configuration. Storybook seems to work
correctly.
The migration was guided by the Storybook changelog[1] and the
Storybook v6 migration guide[2].
There is one Storybook error remaining; it fails to load the Euclid
font. This is a pre-existing error though, so we can fix it in a later
PR.
The `yarn.lock` file was deduplicated in this PR as well, as it was
required to fix various install warnings that were introduced with this
update.
[1]: https://github.com/storybookjs/storybook/blob/next/CHANGELOG.md
[2]: https://github.com/storybookjs/storybook/blob/next/MIGRATION.md
* Validate sendToken address when component updates
On a reproduction of trying to get the error message it seems that if an token address is provided in the address form with ETH selected then changing to a token address, the error message won't show.
This will validate the sendtoken address on prop change to properly update the warning message.
* Update test to include second doesAmountErrorRequireUpdate call when state is updated and component is updated
This fixes a PropType error when using non-custom slippage, and it
fixes a type inconsistency when custom slippage is used.
Previously, `slippage` was being converted explicitly to a `Number` as
it was passed into `BuildQuote`, but not as it was passed into
`AwaitingSwap`. Also the PropType was set as `string`, despite the fact
that it's a number in most cases, and is used for math.
The PropType has been changed to `number`, and the selective casting to
`Number` has been removed. Instead, the `maxSlippage` value is cast to
a `Number` as it's being selected, so that the type is always
consistent.
* Revert "Update fee card designs to show savings and MM fee (#9629)"
This reverts commit d9924ca771.
* Revert "Update main-quote-summary designs/styles (#9612)"
This reverts commit 5456d55c88.
* Add token verification message to swaps build quote screen
* Adds description for locale
* Use <a> tag for etherscan link
* Remove unnecessary span
* Update ui/app/pages/swaps/build-quote/build-quote.js
Co-authored-by: Mark Stacey <markjstacey@gmail.com>
Co-authored-by: Mark Stacey <markjstacey@gmail.com>
* Move add contact button in fullscreen/expanded view.
Fixes#9868
Move the add contact button that is overlapping (x)/close setting icon lower, on the same line as Contacts in fullscreen/expanded view.
This reverts commit f30d261e69.
The custom HD path option was found to be unsafe to use, because the
displayed list of accounts would differ depending on which application
was open on the Ledger device. Essentially Ledger was accepting invalid
inputs, and returning junk responses.
This was too dangerous to ship, as it could leave users with an account
that they can't reliably recover. If we don't know how the derivation
is happening, then allowing this import puts our users at risk of
losing funds.
We can re-introduce this functionality after adding validation to
ensure that we only allow inputs that are handled correctly by Ledger.
* Update fee card designs to show savings and MM fee
css touch up
More semantic html and remove unnecessary container wrapper
Update message for case when there are no savings, in new swaps fee card designs
Improve display of tilde in savings designs
* Ensure terms of service is shown when insufficient eth warning is shown on view-quote screen
* Logic simplification in fee-card.js
* Better center info tooltip icons in fee-card
* Add comment about use of \!important in fee card css
* Use container class property on info tooltip in fee card
* Remove function call that was made redundant with 980b14089 but not removed during rebase
* Document where we need BigNumber-related changes
* Fix 1 unit test
* Debug progress
* Add required values for each upstream usage of getBigNumber
* Switch to base 10
* Address feedback
* Fixes related to swaps custom gas limit
* Update ui/app/pages/swaps/view-quote/view-quote.js
Co-authored-by: Erik Marks <25517051+rekmarks@users.noreply.github.com>
* Move selectQuotePopover onSubmit dispatches to a single action creator
* Correct type of minimumGasLimit in view-quote.js
Co-authored-by: Erik Marks <25517051+rekmarks@users.noreply.github.com>
Failed metric events on the opt-in page no longer leave the user stuck
on that page. If the metric events fail, they still bubble up as errors
to be caught by Sentry and logged to the console, but the user is still
brought to the next page.
Fixes#9800
The bug with our onboarding library integration was introduced in #8873
because of a change in when `completeOnboarding` was called. We hadn't
realized at the time that the onboarding integration relied upon the
onboarding completing event to know when the onboarding state should
be cleared. Because onboarding is now marked as completed earlier, the
state was cleared just as it was intended to be used.
The onboarding completed event has been moved back to where it was
before: after the user exits the "end of flow" page.
The original problem that #8873 was addressing was a routing issue,
where the user would be redirected back to the seed phrase confirmation
page despite already having confirmed their seed phrase. This was fixed
in a different way here, by updating the routing in the first time flow
switch to skip straight to the end of flow page if the seed phrase has
already been confirmed.
This does involve one user-facing change in behavior; if the user opens
any MetaMask UI before navigating away from the end-of-flow screen,
they will still be considered mid-onboarding so it'll redirect to the
end-of-flow screen. But we do mark onboarding as completed if the user
closes the tab/window while on the end of flow screen, which was
another goal of #8873.
The property `quoteDataRows[0]rawNetworkFees` was described as a number
rather than a string. In practice it is a string in all cases. The
PropType and the tests have both been updated to expect it to be a
string.
The `seedPhraseBackedUp` now tracks whether or not the seed phrase has
been backed up. Previously this defaulted to `true`, which left no way
to distinguish whether it had been backed up or not during onboarding.
The default is now `null`, and the UI logic has been updated to account
for this, so that "existing users" (i.e. users that have a backup that
is years old) aren't mistakenly considered to have not backed up their
seed phrase. This value is already set explicitly to `true` or `false`
during onboarding, in both the create and import flow.
This change was made primarily to make it easier to fix the onboarding
library integration, which will be done in a subsequent PR.
This reverts commit f5265c24ab.
Apparently it wasn't unnecessary after all. The Lock page served a few
different purposes. First, it was used to safeguard the seed phrase, in
case the user was interrupted after setting a password. Otherwise
anyone could open MetaMask and see the seed phrase without verifying
the password. Second, the submit function for the initialization unlock
screen also returned the seed phrase, so that it could be set in React
state for the confirmation step. Third, the submit function was also
responsible for navigating back to the seed phrase reveal page.
Removing the lock page had the effect of causing an infinite render
loop if onboarding was interrupted in the "Create" flow after setting
a password but before seed phrase confirmation. That redirect loop has
now been fixed.
* create custom addHexPrefix function
* switch to custom addHexPrefix
Co-authored-by: Mark Stacey <markjstacey@gmail.com>
Co-authored-by: Erik Marks <rekmarks@protonmail.com>
A lint error was accidentally introduced recently when two PRs changed
the same area of code (#9793 and #9795). They didn't conflict, and the
lint passed for both, but when combined they left an unused variable.
This page appears to serve the sole purpose of locking the extension
and redirecting back to the base route if the page is refreshed during
the onboarding flow. This ineffectual before the vault has been
initialized, and it's a barrier to resuming interrupted onboarding
flows when done after initialization.
This prop was being passed to the `CreatePassword` component, but that
component has no prop with this name. In fact, no component in this
entire project does.
Adds swaps-gas-customization-modal and utilize in swaps
Remove swaps specific code from gas-modal-page-container/
Remove slow estimate data from swaps-gas-customization-modal.container
Use average as lower safe price limit in swaps-gas-customization-modal
Lint fix
Fix up unit tests
Update ui/app/ducks/swaps/swaps.js
Co-authored-by: Mark Stacey <markjstacey@gmail.com>
Remove stale properties from gas-modal-page-container.component.js
Replace use of isCustomPrice safe with isCustomSwapsGasPriceSafe, in swaps-gas-customization-modal
Remove use of averageIsSafe in isCustomPriceSafe function
Stop calling resetCustomGasState in swaps
Refactor 'setter' type actions and creators to 'event based', for swaps slice custom gas logic
Replace use of advanced-tab-content.component with advanceGasInputs in swaps gas customization component
Add validation for the gasPrices endpoint
swaps custom gas price should be considered safe if >= to average
Update renderDataSummary unit test
Lint fix
Remove customOnHideOpts for swapsGasCustomizationModal in modal.js
Better handling for swaps gas price loading and failure states
Improve semantics: isCustomSwapsGasPriceSafe renamed to isCustomSwapsGasPriceUnSafe
Mutate state directly in swaps gas slice reducer
Remove unused params
More reliable tracking of speed setting for Gas Fees Changed metrics event
Lint fix
Throw error when fetchSwapsGasPrices response is invalid
add disableSave and customTotalSupplement to swaps-gas-customization container return
Update ui/app/ducks/swaps/swaps.js
Co-authored-by: Mark Stacey <markjstacey@gmail.com>
Improve error handling in fetchMetaSwapsGasPriceEstimates
Remove metricsEvent from swaps-gas-customization-modal context
Base check of gas speed type in swaps-gas-customization-modal on gasEstimateType
Improve naming of variable and functions use to set customPriceIsSafe prop of AdvancedGasInputs in swaps-gas-customization-modal
Simplify sinon spy/stub code in gas-price-button-group-component.test.js
Remove unnecessary getSwapsFallbackGasPrice call in swaps-gas-customization-modal
Remove use of getSwapsTradeTxParams and clean up related gas price logic in swaps
Improve validator of SWAP_GAS_PRICE_VALIDATOR
Ensure default tradeValue
