* NFTs: Use Unknown Collection instead of first NFT name
* Use localization in hook
* Get localization for previously owned
* Fix tests
---------
Co-authored-by: Dan Miller <danjm.com@gmail.com>
* fix(18194): Redirect to extension expanded view when click back to safety button
* Bump phishing warning version
---------
Co-authored-by: Dan J Miller <danjm.com@gmail.com>
The `network` store of the network controller crams two types of data
into one place. It roughly tracks whether we have enough information to
make requests to the network and whether the network is capable of
receiving requests, but it also stores the ID of the network (as
obtained via `net_version`).
Generally we shouldn't be using the network ID for anything, as it has
been completely replaced by chain ID, which all custom RPC endpoints
have been required to support for over a year now. However, as the
network ID is used in various places within the extension codebase,
removing it entirely would be a non-trivial effort. So, minimally, this
commit splits `network` into two stores: `networkId` and
`networkStatus`. But it also expands the concept of network status.
Previously, the network was in one of two states: "loading" and
"not-loading". But now it can be in one of four states:
- `available`: The network is able to receive and respond to requests.
- `unavailable`: The network is not able to receive and respond to
requests for unknown reasons.
- `blocked`: The network is actively blocking requests based on the
user's geolocation. (This is specific to Infura.)
- `unknown`: We don't know whether the network can receive and respond
to requests, either because we haven't checked or we tried to check
and were unsuccessful.
This commit also changes how the network status is determined —
specifically, how many requests are used to determine that status, when
they occur, and whether they are awaited. Previously, the network
controller would make 2 to 3 requests during the course of running
`lookupNetwork`.
* First, if it was an Infura network, it would make a request for
`eth_blockNumber` to determine whether Infura was blocking requests or
not, then emit an appropriate event. This operation was not awaited.
* Then, regardless of the network, it would fetch the network ID via
`net_version`. This operation was awaited.
* Finally, regardless of the network, it would fetch the latest block
via `eth_getBlockByNumber`, then use the result to determine whether
the network supported EIP-1559. This operation was awaited.
Now:
* One fewer request is made, specifically `eth_blockNumber`, as we don't
need to make an extra request to determine whether Infura is blocking
requests; we can reuse `eth_getBlockByNumber`;
* All requests are awaited, which makes `lookupNetwork` run fully
in-band instead of partially out-of-band; and
* Both requests for `net_version` and `eth_getBlockByNumber` are
performed in parallel to make `lookupNetwork` run slightly faster.
* added the rest of the sev1 warnings to getSnapInstallWarnings
* added and updated translations
* Updated getSnapInstallWarnings to include warnings for all weight-1 permissions
* Updated snap install warning and css according to designs
* fix snaps tests
* fixed alignment/spacing
* updated e2e tests to click through the newly displayed public key access warning
* lint fix
* fixed update snap test
* refactored getSnapInstallWarnings, moved logic to PERMISSION_DESCRIPTIONS
* fix logic to account for objects & arrays
* update function description
* add missing properties to ethereum provider description
* moved id and message to baseDescription to fix error
* add optional chaining to fix undefined error
* more optional chaining
* more optional chaining
* Update UI related to MetaMask Snaps Platform trademark
* Remove redundant UI text according to new designs
* Fix lint errors
* Fix e2e test expectation
* Fix lint in test
* Fix e2e test expectation
* Fix some UI parts
* Update CSS for noSnaps message
* Add next design iteration
* Add minor fix
* Update locale message
* Fix learn more text size
* Refactor usage of design system components
---------
Co-authored-by: Erik Marks <rekmarks@protonmail.com>
The `HardwareKeyringTypes` constant has been renamed to `KeyringTypes`
and moved to a separate constants module, to reflect that it contains
more than just hardware wallet keyring types. This corrects a mistake
made recently during a TypeScript conversion.
* Added fallback copy for when we're not able to retrieve a erc721 or erc1155 name in the setApprovalForAll screen and added unit tests
* Fixing lint
* Review requested changes
* Modify small copy changes in messages.json
* Fixing nft e2e tests
* Fixing nft e2e tests final
* Added snapshots for tests and removed data-testid
* Modify translation messages and e2e tests
* add e2e test for onboarding flow
* Add method to test if we create a new wallet
* fix code
* editng code
* Add test if import wrong SRP
* fix test
* add test where we chack if user select diffrent type of SRP
* update test for checking if user select different SRP
* update code
* add test for if user enter wrong password in confirm password field
* add two test to verify if user is on correct page after import wallet
* update cod
* lint fix
* fix code to test pass
* fix code
* improve code
* change completeCreateNewWalletOnboardingFlow function parameters and update code
* delete unnecessary wait
---------
Co-authored-by: dzfjz <120640011+dzfjz@users.noreply.github.com>
Co-authored-by: dzfjz <dzenana.fejzic-ext@consensys.net>
* Revert "Moved subscribe and filter into network controller (#16693)"
This reverts commit 6f6984fa58. That
commit was an RPC middleware refactor intended to move the subscribe
and filter middleware into the network controller, to simplify the
process of sharing this middleware between clients.
This refactor resulted in `eth_subscribe` notifications being sent on
the wrong connections, causing the UI to break in some cases (the UI
`provider` connection does not support notifications). This happened
because the `setupProviderEngine` function runs per-connection,
whereas the engine setup inside the network controller is global. The
global network client cannot support notifications because it has no
way to route them; they'll need to stay in the per-connection provider
engine.
Closes#17467
* Add e2e test
An e2e test has been added that confirms subscriptions are only
broadcast to the site that registered them. This test fails on
`develop`.
* NFTs: Remove feature flag for release
* Update security tab jest test
* Fix broken test
* Update snapshot
* Update test
* Fix test
* remove nft build
* move tests to main e2e job
* remove nft scripts
* remove test for nft build
---------
Co-authored-by: David Walsh <davidwalsh83@gmail.com>
* adding base what's new for NFT autodetection
* lintfix
* Adding nfts svg image
* adding new notification to fixture builder for e2e
* lint:fix
* Adding new messaging, styling what's new
* styling descriptions, increasing fullscreen height
* applying firstNotification styling to NFT whats new announcement
* adding scrollDown button to whats new popup
* adding Opensea announcement, removing old announcement, moving scrollDown button up to popover component
* verify-locales:fix
* updating icon
* Removed a feature flag
* Add test for transaction security provider
* add rest of the test cases for transaction security provider
* change code
---------
Co-authored-by: Filip Sekulic <filip.sekulic@consensys.net>
* Added test for submitting second swap without waiting for first one to finish
* Added more test code
* Removed look around Review Swap button
* Added test verification for the transaction details
* Changed mocked API for token import
* Added assert error messages
* Fixed lint errors
* Removed empty lines and improved coding consistency
* Removed empty lines
* added long test
* Wait for a maximum of 65 seconds, not a hardcoded length
* Fix lint
---------
Co-authored-by: Frederik Bolding <frederik.bolding@gmail.com>
This release only includes one breaking change, which is the renaming
of the package to be under the `@metamask` scope. It includes
improvements to the types that will unblock migrating our network
clients to TypeScript.
The PhishingController has been updated to v2. This release should
dramatically reduce network traffic and double the update speed of the
phishing list.
This was accomplished by combining both of our phishing configurations
into one list (the "stalelist"), then creating a separate list of the
changes just the past few days (the "hotlist"). Now users will download
a smaller list more frequently (every 30 minutes rather than every
hour), whereas the full list is only updated every 4 days.
The combined configuration means that we no longer know which list was
responsible for each block. The phishing warning page has been updated
to dynamically look this information up, to ensure users are still
directed to the correct place to dispute a block. This update to the
phishing warning page also includes the recent redesign.
* feat: add desktop enable button component
This component will be added
to the experimental page. Users
will then be able to initialize
a desktop connection
* feat: add desktop pairing page
* feat: add desktop deep-linking shared lib
* test: add initial entries to render helper
Allow specifying initialEntries for
MemoryRouter. This change will allow
testing pages that use the useParam
hook.
* feat: add desktop error page
Error page for any desktop pairing
related issue
* feat: add desktop routes to route component
* feat: add enable desktop button to experimental tab
* feat: add desktop icon when paired in dev mode
* feat: disable ledger live control when desktop enabled
* feat: register desktop error actions on ui init
* fix: add missing code fencing
* chore: remove enable desktop rpc middleware
Now that we are adding the UI
there's no need for this rpc middleware
(as it was used to test desktop background
code)
* fix: display experimental tab for desktop
Use DesktopManager in background script to redirect internal and external connections to the desktop app.
Include DesktopController in the MetaMask controller.
Support desktop keyrings in MetaMask controller via the overrides object.
Create middleware handler to connect to the desktop app while UI code is pending.
Add build system support for desktop specific configuration variables.
* Ensure simulation failure warning is shown on all networks and accounts
* Add e2e test to cover failure warning behaviour on non-eip-1559 network
* Fix new e2e test
The network controller has some tests, but they are incomplete and don't
follow our latest best practices for writing unit tests.
This commit greatly increases the amount of test coverage for the API
that we want to retain in NetworkController, in particular the seemingly
myriad paths that the code takes starting from `initializeProvider`,
`resetConnection`, `setRpcTarget`, `setProviderType`,
`rollbackToPreviousProvider`, and `lookupNetwork`.
There were a couple of pieces of logic I noted which don't seem to have
any effect due to being redundant or unreachable, but they also don't
make our lives more difficult, either, so I opted to leave them in.
Co-authored-by: Mark Stacey <markjstacey@gmail.com>
Co-authored-by: Zachary Belford <belfordz66@gmail.com>
* Add ipfs gateway and collectible state to mock-state.json
* Add collectible-default-image test with snapshot and testids
* Add Collectible Details test, snapshot, and test-ids
* Add Collectible Options tests and test-ids
* Add Collectible Items test and test-ids.
* Add more tests to Add Collectible component
* Update Security Tab snapshot with ipfs gateway state value
* Add data-testid to Menu component for menu background
* Lint
* Bump coverage targets
* Remove commented import
---------
Co-authored-by: David Walsh <davidwalsh83@gmail.com>
* Added translation for eth sign toggle
* Disabled the ability to call eth_sign by default. Added ability within advanced settings to renable support for eth_sign
* Add test case for eth_sign being enabled and disabled
* Modified copy
* Moved rpc method preference to its own object within store
* Complete work on moving rpc method preference into its own object within store
* Fix with prettier
* Fix lint
* Fix a unit test
* Fix test
* Renamed function and object keys to be more intuitive
* Fix e2e test
* Enabled eth_sign through preferences fixture
* Fix lint
* Fix e2e test
Wait for the notification popup to close, leaving 2 window handles the extension and the test dapp
* Fix e2e test
* Fix unit test
Enable eth_sign method
* Lint fix
---------
Co-authored-by: PeterYinusa <peter.yinusa@consensys.net>
Co-authored-by: Dan J Miller <danjm.com@gmail.com>
* Use network provider state, instead of CurrencyRateController state, select 'nativeCurrency'
* Fix unit tests
* Lint fix
* Only use the network provider ticket for the native currency when useCurrencyRateCheck is false
* Fix unit test
* Fix tests for real
* add test for deleting added custom network
* update code because of failing on firefox browser
* changing steps for adding custom network
* chage code for custom network
* Add transaction activity log component
* Remove duplicate tx activity log snapshot.
* Convert Advanced Tab to tlr.
* Lint fix
* Change ENS to DNS in mock state data.
* Add test ids for speedup, cancel, rety buttons.
* Convert TransactionListItemDetails component to RTL.
* Convert PageContainerHeader component to RTL.
* Convert TokenInput component to RTL.
* Convert UnitInput component to RTL.
* Convert withModalProps to RTL.
* Convert i18n-helper to RTL.
* Convert ConfirmSeedPhrase component to TLR.
* Convert AddRecipient component to RTL.
* Set process.env metamask build type to 'main' for test
Co-authored-by: Brad Decker <bhdecker84@gmail.com>
Co-authored-by: Pedro Figueiredo <pedro.figueiredo@consensys.net>
* Recipient name passed to confirm-page-container component should be used if pet name exists for the to address
* Ensure recipient edit/add popup is shown for non-owned accounts
* Ensure contract name is rendered if it exists for recipient address
* Ensure that shortened address is last fallback after account, addressbook, token and ens names
A `debug` flag has been added to our e2e test runner scripts, enabling
e2e debug logs. When this flag is enabled, all driver interactions will
be logged to the console. This is extremely useful when debugging e2e
tests, because it lets you known how far the test had progressed before
failing.
This flag should work with all existing e2e test scripts, including
both `test:e2e:single` and all of the test commands that run entire
test suites.
The README has been updated to reference this flag in the section
regarding how to run a single e2e test. To ensure this wasn't totally
missed for the other scripts, I added a line suggesting that users use
`--help` to see all supported options.
Fix e2e test
Update siteicon for v4 signature type
Code refactor
Code refactor
Remove origin and address in signatrue request
Update e2e tests
Use getNetworkName function
Move header component inline jsx
Update snaps
* First e2e mv3 specific dapp testcase
* Fix testpath for snaps
* Update `it` description
Co-authored-by: Mark Stacey <markjstacey@gmail.com>
* e2e test paths improvement
Co-authored-by: Mark Stacey <markjstacey@gmail.com>
* Wait until element is not present
* Wait for non empty element on add account test
* Wait for non empty element for all instances of get account text
* Point to account value directly
* Add accounts as const
