The third and fourth parameters were unused, so they have been removed.
The tests descriptions for both `getToErrorObject` and
`getToWarningObject` have been improved as well.
The chosen token in the `send` flow was set from one of two places:
`metamask.selectedTokenAddress` or `metamask.send.token`. The former is
used most of the time, but the latter is used for the 'Edit' button
shown in the upper-left of the confirmation UI.
The send flow will now exclusively use `metamask.send.token` for the
token state during the send flow. `metamask.selectedTokenAddress` is
now only used for the selected token state on the Home screen. This
simplifies the Redux state, as the send token is now in one place
instead of two, and `metamask.selectedTokenAddress` has only one
purpose.
The `TokenInput` component now takes the token as a prop, instead of
using the `selectedTokenAddress` state. The `UserPreferencedTokenInput`
component that wrapped `TokenInput` has also been updated to take the
token as a prop.
This function primarily ensured that there was a reasonable fallback
for `txParams` if the given transaction was missing it. This fallback
was only used in one place: the customize gas modal, during the send
flow specifically.
The helper function has been removed, and the default `txParams` is set
in the one place it was needed. In the future we should attempt to
simplify this modal so it doesn't need to know details about the
context in which it's being used.
The transaction list now filters by token in the `TransactionList`
component instead of in the transaction selector. This was done in
preparation for the asset page work.
Technically this approach is slightly less efficient than before, as
we're now filtering the transactions after they've been grouped
together rather than beforehand. The difference is minimal though, and
this method is more correct.
The old filtering was broken because it inappropriately filtered out
cancel transactions. Cancel transactions always have the `to` address
set to the same as the `from` address, and the token filter only
returned transactions where the `to` address was set to the token
address.
Now that we're only filtering by the `to` address of the initial
transaction, token transaction groups will be included in their
entirety, including any cancel transactions.
The `decimals` property of tokens was being set as a string instead of
a Number for any tokens added via `getTokenParams`. It's now cast to a
Number instead.
This prop is no longer required, now that the new fullscreen redesign
has been implemented. This was unused before the redesign as well,
seemingly by accident.
The fullscreen UI now shows roughly the same design as the popup UI.
A few additional changes depicted in the new fullscreen designs will
be implemented in subsequent PRs (e.g. the inline buttons on assets)
This was done now to make asset pages easier to implement. Implementing
asset pages solely for the popup UI would have been complicated by the
fact that we use viewport size to switch between the two layouts, so we
would have had to re-route upon resizing the window.
The `AccountDetailsDropdown` component has been rewritten to use the
new `Menu` component, and to follow the latest designs.
This should be functionally equivalent. A couple of the icons have
changed, but that's about it.
Support for a subtitle was added to `MenuItem` to support the `origin`
subtitle used for the explorer link for custom RPC endpoints.
A few adjustments were required to `test/helper.js` to accommodate
the use of `Menu` from a JSDOM context (this is the first time it's
been used in a unit test). A `popover-content` element was added to the
fake DOM, and another global was added that `react-popper` used
internally.
An additional driver method (`clickPoint`) was added to the e2e driver
to allow clicking the background behind the menu to dismiss it. This
wasn't possible using the `clickElement` method, because that method
would refuse to click an obscured element. The only non-obscured
element to click was the menu backdrop, and that didn't work either
because the center was obscured by the menu (Selenium clicks the center
of whichever element is targeted).
The `MenuBar` component has been converted to a functional component.
This was done to make upcoming changes related to the home screen
redesign easier to implement.
The `TransactionViewBalance` component has been split into three
separate components. This was done primarily to make the asset page
easier to implement. Also the name `TransactionViewBalance` didn't
describe this component very well anymore.
Instead of the Ethereum and token-specific logic being in the same
component, the two cases were split into the `EthOverview` and
`TokenOverview` components respectively. They both use the
`WalletOverview` component, which has the structure shared by both
cases.
A `Menu` component has been extracted from the
`ConnectedAccountsListOptions` component. The menu and the menu items
are now the `Menu` and `MenuItem` components respectively.
A custom body was added to the Storybook preview to ensure that the
`popover-content` element was present in the DOM before the Menu was
constructed.
The `Identicon` component was being passed a `network` prop, despite
not accepting a `network` prop.
A duplicate set of `token-cell` tests have also been deleted, as they
used this prop. The tests were never run, because the file was misnamed
(it needs to be named `.test.js`).
CSF = Storybook’s Component Story Format (CSF)
See https://storybook.js.org/docs/formats/component-story-format/
Note that the migrations still use CommonJS require, so the default export as
an object is quite ergonomic (& I don't want to touch the migrations).
This changeset updates the `getOriginOfCurrentTab` selector and the container
for the ConnectedSites page to use `activeTab.origin` instead of parsing the
URL. The `activeTab` URL is parsed in `queryCurrentActiveTab` before the UI is
launched and any subsequent parsing of the URL is unnecessary.
See `queryCurrentActiveTab` in `ui.js:86` [1].
[1]:e7bb0876f5/app/scripts/ui.js (L86-L118)
The account options menu is now much faster, and it correctly closes
when 'Switch account' is selected.
A static width had to be set on the menu so that it could be positioned
reliably. Without this width set, it was rendered as a different size
before positioning than after, which resulted in it being positioned
incorrectly. A `z-index` had to be added (equal to the `z-index` used
by the popover component) to ensure it wasn't rendered beneath the
popover.
The menu is automatically positioned relative to the account options
button, appearing below the button by default but above it instead if
there isn't room below. It is positioned to be inside the bounds of the
popover as well.
The account options button is now a `<button>` rather than a `<i>`.
This required a few additional style rules to overrule the default
button styles. Additionally the size was increased so that it matches
the designs more closely.
The callbacks for connecting, disconnecting, and switching accounts
have been updated to use state and props to determine the correct
address to use, rather than being bound to the correct address
parameter in the render function. This means we aren't creating a new
function upon each render anymore.
The `showAccountOptions` method still needs to be bound once per
account, but this was switched to use more readable syntax (`.bind`,
instead of the double arrow function).
`react-popper` and `@popperjs/core` were both added as dependencies.
These should be used for any UI requiring relative positioning (e.g.
tooltips, menus, etc.). Older versions of these libraries are already
in our codebase as transitive dependencies of the tooltip library we're
using.
The connected accounts are now ordered by keyring controller order
whenever the `lastSelected` time is equal. This ensures the order is
identical to what connected sites see. This is especially important
when no accounts have been selected, as it ensures the correct account
is marked as the "Primary" account.
The asset list has been updated to more closely match the new designs.
There are still a few major differences (e.g. the selection state, the
token menu) that can't be implemented until the asset screen has been
implemented.
The background color of the selected asset has been lightened, so that
it's less jarring until we remove it.
What
- modify `ui/app/helpers/utils/transactions.util.js` and
`ui/lib/account-link.js` to strip trailing slashes
if they are present.
- added relevant tests not just for the new scenario,
but also the general scenarios for these functions,
as there previously was no test coverage for these
two functions.
Why
- Current behaviour, when user enters a block explorer URL
when configuring a custom RPC, and that block explorer URL
contains a trailing `/`.
- e.g. `https://block.explorer/`
- this results in a double-slash (`//`) in the transaction
and account URLs generated by MetaMask.
- e.g. `https://block.explorer/tx/0xabcd...`,
`https://block.explorer/account/0xabcd...`
- This needs to be handled using a router redirect
on the server of the block explorer,
and this changes would avoid that requirement.
The tabs on the Home page have been updated to match the new home
screen designs.
A new `activeClassName` prop was added to the `Tab` component to allow
applying different styles to the active tab state.
I ran into specificity problems when overriding the default `Tab` styles
because the import order of our CSS is bizarre and wrong. For now I've
used a crude workaround, but we can fix this properly later by changing
the import order to place styles likely to be overridden first.
All asset list items now use the same component (`AssetListItem`).
Previously the tokens and the Ethereum balance were totally separate
components, despite being styled similarly.
Various unnecessary DOM elements and style rules were removed, but the
overall list looks identical to how it looked before.
`getShowFiatSelector` would return the `showFiatInTestnets` value
directly when on mainnet, which could be `undefined`. Now it is cast to
a Boolean instead.
This was done to fix a PropType warning in a component that will be
included in a future PR, where this selector was used for a required
prop.
Defaults have been added for all three preferences. The default values
added are both falsey, so this shouldn't result in any functional
change. This was done to help make this preferences more easily
discoverable.
The IDs for the `numberOfTokens` and `numberOfAccounts` Action
Dimensions were swapped. These are the correct IDs. We'll have to
consider that these are swapped when viewing any pre-v8.0.0 metrics.
The `.scss` file extension is not required when importing SCSS files.
It has been removed from all imports, for consistency. I chose to
remove it rather than add it everywhere because imports without the
extension seem to be more common.
The CSS class for the fallback Ethereum logo used in the identicon
component was with the `AssetList` styles, and was confusingly named
`balance-icon`. It has been migrated to the identicon styles, and
renamed `identicon__eth-logo`.
A few redundant rules have been removed as well (they were always
overridden by inline styles).
Add alert suggesting that the user switch to a connected account. This
alert is displayed when the popup is opened over an active tab that is
connected to some account, but not the current selected account. The
user can choose to switch to a connected account, or dismiss the alert.
This alert is only shown once per account switch. So if the user
repeatedly opens the popup on a dapp without switching accounts, it'll
only be shown the first time. The alert also won't be shown if the user
has just dismissed an "Unconnected account" alert on this same dapp
and account, as that would be redundant.
The alert has a "Don't show me this again" checkbox that allows the
user to disable the alert. It can be re-enabled again on the Alerts
settings page.
This component was indended to show both ETH/fiat and token balance,
but today is not used for token balance. As a result, large pieces of
this component and many props were unused in practice. The condition
about `formattedBalance` returning a falsy or `None` or `...` result
was also removed, as that doesn't seem to be possible.
The `balanceValue` passed into the `Balance` component in the asset
list has also been removed, as it isn't used.
When disabling an alert, the background `alertEnabledness` state of the
alert was being set to `undefined` instead of `false`. This didn't have
any user-facing effect, since `undefined` is falsey, but it did result
in a PropType error on the Alert settings page. This mistake was made
in #8550.
The `alertEnabledness` state is now correctly set to `false` instead of
`undefined`.
The unconnected account alert can now be disabled. A "don't show this
again" checkbox has been added to the alert, which prevents that alert
from being shown in the future.
An alert settings page has been added to the settings as well. This
page allows the user to disable or enable any alert.
The hover state background color of the "Account" in the popup home
screen menu bar has been updated to match the hover state background
color of the connected status indicator. Both hover state backgrounds
now match.
The checkbox color was sometimes incorrect after it was checked. I'm
not sure how to consistently reproduce this issue, but I was able to
make this happen most of the time if I clicked the checkbox while some
text was highlighted.
It seems that the `:checked` and `:indeterminate` pseudo-selectors were
not being applied right away for some reason. Either that or React
wasn't setting the `checked` state of the `input` element right away.
This problem has been worked around by using CSS classes instead of
pseudo-selectors. I am no longer able to reproduce the issue now.
A change made in #8284 had the unintended side-effect of making this
scrollbar appear on the home screen. Previously it was scrollable
without any scroll bar being visible.
This new dropdown component uses a native `select` element, thus
avoiding various issues encountered in attempting to reuse our existing
dropdown components for the new permission system alert modal.
The prefixed forms of `appearance` have been added temporarily so that
the component can be used in Storybook, as our Storybook config isn't
setup to do autoprefixing yet. Our real build system does handle
autoprefixing for this rule correctly already.
Resolves three different style issues due to overflow of content
and addresses an issue where UI was being squished due to available
screen real estate.
- On the choose account modal, when a user has enough accounts to need
to scroll within the account chooser, the last-connected data column
was squished. This is resolved by using a tooltip and icon for this data
rather than text printed in column.
- On the connection permission result screen where it shows the Dapp icon ->
Metamask icon, the bottom of the logos and dropshadows were being cut off
this was resolved by removing the height set on this element and allowing
it to fill the available space.
- On the confirmation screen the content appeared off center due to the scrollbar being overlayed instead of auto. This was resolved by removing some of the setting of manual overflow controls on the body element.
Tokens are now updated when the account switches after a failed account
import. The usual account switching flow (via the account menu) already
updated tokens, but this step was omitted when the account switched
after a failed import.
* Remove `estimatedGas` property from `txMeta`
The `estimatedGas` property was a cache of the gas value estimated for
a transaction when the default gas limit was set. This property wasn't
used anywhere. It may have been useful for debugging purposes, but the
same gas estimate is already stored on the `history` property so it
should be present in state logs regardless.
* Remove `gasLimitSpecified` txMeta property
The `gasLimitSpecified` property of `txMeta` wasn't used for anything.
It might have been useful for debugging purposes, but whether or not
the gas limit was specified can also be determined from looking at the
transaction history, so it's not a huge loss.
* Remove `gasPriceSpecified` txMeta property
The `gasPriceSpecified` property of `txMeta` wasn't used for anything.
It might have been useful for debugging purposes, but whether or not
the gas price was specified can also be determined from looking at the
transaction history, so it's not a huge loss.
* Remove `simpleSend` txMeta property
The `simpleSend` property of `txMeta` was used to ensure a buffer was
not added to the gas limit during gas estimation for simple send
transactions. It was made redundant by #8484, which accomplishes this
without the use of this property.
An alert is now shown when the user switches from an account that is
connected to the active tab to an account that is not connected. The
alert prompts the user to dismiss the alert or connect the account
they're switching to.
The "loading" state is handled by disabling the buttons, and the error
state is handled by displaying a generic error message and disabling
the connect button.
The new reducer for this alert has been created with `createSlice` from
the Redux Toolkit. This utility is recommended by the Redux team, and
represents a new style of writing reducers that I hope we will use more
in the future (or at least something similar). `createSlice` constructs
a reducer, actions, and action creators automatically. The reducer is
constructed using their `createReducer` helper, which uses Immer to
allow directly mutating the state in the reducer but exposing these
changes as immutable.
`removeFromAddressBook` returned a thunk that didn't return a Promise,
despite doing async work. It now returns a Promise.
The callers were updated to `await` the completion of this operation.
`addToAddressBook` returned a thunk that didn't return a Promise,
despite doing async work. It now returns a Promise.
The callers of this action creator were updated to `await` the
completion of the operation. It was called just before redirecting the
user to a different page or closing a modal, and it seemed appropriate
to wait before doing those things.
`editRpc` returned a thunk that didn't return a Promise, despite doing
async work. It now returns a Promise.
In the one place where this is used, it didn't seem important to update
the callsite to block on this finishing. Only one call followed it in
the event handler, and it didn't seem to depend on this.
`updateAndSetCustomRpc` returned a thunk that didn't return a Promise,
despite doing async work. It now returns a Promise.
In the one place where this is used, it didn't seem important to update
the callsite to block on this finishing. Only one call followed it in
the event handler, and it didn't seem to depend on this.
The `getSelectedAddress` selector has a fallback of selecting the first
MetaMask account. This is not useful. The only time the
`selectedAddress` is not set is during onboarding, before any accounts
exist, so selecting the first account wouldn't be useful anyway.
Co-authored-by: Erik Marks <25517051+rekmarks@users.noreply.github.com>
`setRpcTarget` returned a thunk that didn't return a Promise, despite
doing async work. It now returns a Promise.
The callers of this action creator didn't need to be updated, as they
were all in event handlers that didn't require knowing when the
operation had completed.
`editRpc` returned a thunk that didn't return a Promise, despite doing
async work. It now returns a Promise.
In the one place where this is used, it didn't seem important to update
the callsite to block on this finishing. Only one call followed it in
the event handler, and it didn't seem to depend on this.
Changes to the background state were being detected in the `update`
event handler in `ui/index.js` that receives state updates from the
background. However this doesn't catch every update; some state
changes are received by the UI in-between these `update` events.
The background `getState` function is callable directly from the UI,
and many action creators call it via `forceUpdateMetamaskState` to
update the `metamask` state immediately without waiting for the next
`update` event. These state updates skip this change detection in
`ui/index.js`.
For example, if a 3Box state restoration resulted in a `currentLocale`
change, and then a `forceUpdateMetamaskState` call completed before the
next `update `event was received, then `updateCurrentLocale` wouldn't
be called, and the `locale` store would not be updated correctly with
the localized messages for the new locale.
We now check for background state changes in the `updateMetamaskState`
action creator. All `metamask` state updates go through this function,
so we aren't missing any changes anymore.
`setProviderType` returned a thunk that didn't return a Promise,
despite doing async work. It now returns a Promise.
None of the callers of this action creator needed to know when it
completed, so no changes to the call sites were made.
These action creators for the "message manager" controller
interactions have been updated to use `async/await`. There should be
almost no changes in behavior. The only things removed were a few debug
log statements, and a single `console.log`.
Many of the "message manager" background methods return a full copy of
the background state in their response; presumably to save us from
making a full round-trip to update the UI `metamask` state after it
changes. However, the action creators responsible for calling these
methods were calling `updateMetamaskState` even when the background
method failed. In effect, they were setting the UI `metamask` state to
`undefined`.
They have been updated to only set the UI `metamask` state if the
background method succeeded.
`setSelectedAddress` returned a thunk that didn't return a Promise,
despite doing async work. It now returns a Promise.
This action creator was only called in two places, and neither benefit
from using the Promise now returned. They were both event handlers. In
both cases there was an existing Promise chain, but the only thing
after this set was a `catch` block that displayed any error
encountered. I decided not to return the result of `setSelectedAddress`
to this chain, because all it would do is set the warning a second
time in the event of failure.
The `forceUpdateMetamaskState` function now uses `async/await` instead
of a Promise constructor. This was done to make an upcoming change
easier (making `updateMetamaskState` async).
`showAccountDetail` returned a thunk that didn't return a Promise,
despite doing async work. Now it returns a Promise.
This action is only called in one place, and it looks like the actions
dispatched alongside it were meant to be run in parallel, so no changes
were made there.
`forceUpdateMetamaskState` was being called in various action creators
without `await`. Each action creator now waits for the state update to
complete before continuing.
`setCurrentCurrency` returned a thunk that didn't return a Promise,
despite doing async work. It now returns a Promise.
The callers in this case never needed to know when this action had
completed, but at least this makes our tests more reliable. They were
already `await`-ing this action, despite the lack of Promise.
The action creators that use `forceUpdateMetamaskState` without
awaiting that task's completion have been updated to use `async/await`.
This was done in preparation for `await`-ing the completion of
`forceUpdateMetamaskState`, which will be done in a subsequent PR.
The `shift-list-item` component for displaying ShapeShift transactions
has been removed, along with three other components that were used
solely by that component (`copyButton`, `eth-balance`, and
`fiat-value`).
This component hasn't been used in some time, as ShapeShift
transactions no longer exist to display. The controller that ShapeShift
transactions originated from was removed in #8118, and it became
impossible to create new ShapeShift transactions from within MetaMask
in #6746
This state has been removed from the background. It was used for the
old UI, and has been unused for some time. A migration has been added
to delete this state as well.
The action creator responsible for updating this state has been removed
from the UI as well, along with the `callBackgroundThenUpdateNoSpinner`
convenience function, which was only used for this action.
The `transForward` app state is no longer used, so it has been removed.
Associated actions have been removed as well.
This state dates back a few years, so I was unable to determine when it
was made obsolete.
Keyrings are added either through the `getKeyringForDevice` background
method (as part of the hardware wallet connect flow), or via
`importAccountWithStrategy` (when importing an account). The
`addNewKeyring` action and corresponding background method has not been
used in a long time.
The `estimateGasMethod` function passed to `estimateGas` is now an
async function. It is now invoked using `async/await` rather than a
Promise constructor.
This was done as part of a broader effort to use Promises rather than
callbacks when interacting with the background.
The background connection used in `actions.js` was being promisified
in specific actions. Instead it's now promisified once. This was made
possible by changes in `pify` v5.0.0 that ensure the binding works
correctly when passing in an object to `pify` (e.g. the `this` value
is correctly set to the wrapped background connection).
This async background connection has been temporarily assigned to a
separate variable, until we can transition all of our actions to using
this. This was done to reduce the size of this PR. There are a lot of
actions.
This state hasn't been used since #5886. The nonce we display in our UI
is now from the background, rather than queried directly from the
front-end.
This also means we save making this network call each time a pending
transaction is added, and each time the transaction list is mounted.
The comment above this function was originally written for a different
function: `callBackgroundThenUpdate`. It was mistakenly left above
`callBackgroundThenUpdateNoSpinner` in #1603 when this function was
added.
The original `callBackgroundThenUpdate` function this was written for
was removed recently in #7675, as it was no longer used.
The format of the comment has also been updated to match our
conventions, and JSDoc params have been added.
`markPasswordForgotten` is an asynchronous function, but it was being
called synchronously. The page was redirected without waiting for the
operation to complete.
We now wait for the operation to complete before continuing. Failure is
still not being handled correctly, but that will be addressed in a
separate PR.
* Add popover for informing user about the connected status indicator
* Ensure user only sees connected status info popover once
* Default connectedStatusPopoverHasBeenShown to true and set it to false in a migration
* Add unit test for migration 42
* Initialize AppStateController if it does not exist in migration 42
* Update connect indicator popup locale text
* Code cleanup for connected-indicator-info-popup
* Code cleanup for connected-indicator-info-popup
This method adds the given account to the given origin's list of
exposed accounts. This method is not yet used, but it will be in
subsequent PRs (e.g. #8312)
This method has been added to the background API, and a wrapper action
creator has been written as well.
Selecting a new account now results in all domains that can view this
change being notified. Previously only the dapp in the active tab was
being notified (though not correctly, as the `origin` was accidentally
set to the MetaMask chrome extension origin).
This handling of account selection has been moved into the background
to minimize the gap between account selection and the notification
being sent out. It's simpler for the UI to not be involved anyway.
Previously all browser globals were allowed to be used anywhere by
ESLint because we had set the `env` property to `browser` in the ESLint
config. This has made it easy to accidentally use browser globals
(e.g. #8338), so it has been removed. Instead we now have a short list
of allowed globals.
All browser globals are now accessed as properties on `window`.
Unfortunately this change resulted in a few different confusing unit
test errors, as some of our unit tests setup assumed that a particular
global would be used via `window` or `global`. In particular,
`window.fetch` didn't work correctly because it wasn't patched by the
AbortController polyfill (only `global.fetch` was being patched).
The `jsdom-global` package we were using complicated matters by setting
all of the JSDOM `window` properties directly on `global`, overwriting
the `AbortController` for example.
The `helpers.js` test setup module has been simplified somewhat by
removing `jsdom-global` and constructing the JSDOM instance manually.
The JSDOM window is set on `window`, and a few properties are set on
`global` as well as needed by various dependencies. `node-fetch` and
the AbortController polyfill/patch now work as expected as well,
though `fetch` is only available on `window` now.
The prop passed into the SignatureRequestHeader was changed from
`selectedAccount` to `fromAccount` in #8079, but the header component
itself was never updated to use the new prop name.
The header component for the new Signature Request screen has an
undeclared variable called `name` in it. This was present in the
original implementation of this component in #6891. It's unclear what
this was supposed to be, and it doesn't seem to reference anything that
exists.
This new checkbox component uses a plain `input` component internally,
so the browser treats it like a native checkbox. It is styled by hiding
the native checkbox and replacing it with Font Awesome icons (the same
that we are using in Figma).
Support for a 'disabled' state and an indeterminate state has been
added as well. The `onClick` prop has been made optional, as it may not
be required if the parent component is intercepting the click instead.
The `regular` Font Awesome font style needed to be added so that we
could use the `far fa-square` icon for the unchecked checkbox.
The "global" action constants (the ones previously in `actions.js`)
have been moved to a separate module. This was necessary to avoid a
circular dependency in an upcoming change that was causing problems.
In general the "ducks" pattern of organizing Redux stores does result
in circular dependency problems. This is because reuse of actions
between reducers is encouraged, so it's not uncommon for two reducers
to want to reference an action from the other. Going forward we can
avoid this problem by moving action constants that are shared between
reducers into this shared module.
This change replaces `getRenderablePermissionsDomains` with a new selector `getConnectedDomainsForSelectedAddress` that works better. The data returned from this selector is used to populated the _Connected Sites_ modal, which (as of #8262) didn't use most of the data returned from the old selector.
The old selector only looked at the first address that was exposed, making it not work for anything other than the first account connected to a particular origin.
This action was never triggered in practice, as MetaMask is never
unlocked from the UI. The unlock always occurs as a result of a
background state update.
The last active time for each account in the Connected Sites list was
formatted as `yyyy-M-d` (i.e. without the zero-padding for the month
and the day). This didn't match the designs, isn't compliant with
ISO-8601, and generally isn't a common date format.
The month and day are now zero-padded.
* Connect screen popup redesign
* Open permission request in notification instead of tab
* Remove no longer user locales
* Update permissions unit test mock to accout for change of opts passed to permissions controller
* Lint fix
* Inline broken line svg in permission-page-container-content.component.js for faster loading
* Add back button to second screen on connect flow
* Add xOfY locale and use for the page count in the connect flow
* Lint fix for svgs permission-page-container-content.component.js
* Fix rebase error
* Lint fix
* Clean up styles on the connect-screen-into-popup branch
* Use closeCurrentWindow to close window on cancel when in full screen connect flow
* Handle errors in rejectPermissionsRequest
* Full screen styles for connect flow
* Lint fixed in permissions-connect and actions.js
* Redirect screen now shows metamask icon instead of users identicon
* Fix subtitle spacing in permissions-connect-header'
* Use window.close instead of closeCurrentWindow() in cancelPermissionsRequest
* Use permissions-connect-header__subtitle in permissions-connect-header.component
There were two existing cases where a footer was added to a popover by
putting it in the popover contents. This has been refactored to place
the footer in the popover instead, so that styles common to all
popover footers could be shared.
The popover now has a `section` element instead, giving the `header`
and `footer` elements a correct section context.
The height of the popover is now set to a maximum of 94% of the
viewport height, rather than a static height of 564px. This setting
ensures that the popover has a maximum height of exactly 564px in the
popup, which matches the designs. However it is now able to shrink or
grow to accommodate larger viewports or smaller popovers.
* Implement tooltip and styled sentence parts on header text of second screen of multi-account-select flow
* Clean up code related to the multi-accounts tooltip implementation
* Add UI for selecting multiple accounts on the first permissions connect screen
* Make accounts list scrollable on connect screen
* Change title wording on connect screen to 'select your accounts'
* Add select all tooltip to info circle on top of connect screen account list
* Add security info footer to the first screen of the connect flow
* Apply redesigns to page 2 of connect flow
* Display number of accounts on connect flow second screen if there are multiple to connect
* Update e2e tests for connect screen multi-select changes
* Remove unused chooseAnAcount message
* Fix styling/display of redirect elements on second page of connect flow
* Assorted small fixes in permissions connect
* Remove unnecessary tiny delays in spec files
* Remove incorrect use of bem modified in choose-account
* Remove unused locale
* Use Set for managing selected accounts in choose-acount and permissions-connect componets
* Compone!
* Move connect flow header into a reusable component, and implement new header designs
* Update locales and add missing locales
* Improve permission list item design (second screen of connect flow)
* Check box component improvements
* Fixes in variables.scss
* Simplfy code in selectAll of choose-account.component
* Hide checkboxes on first pages on connect flow when there is only one account
* Allow autofill of default new account modal text with right arrow
* Disable next button on first screen of connect flow when no accounts selected
* Improve choose-account/index.scss
* Remove metamask secure graphic
* Fix connect flow redirect screen
* Fix connectToMultiple locale
* Remove locales no longer used after connect flow multiple connect updates
* Fix size of dapp icon on redirect screen of connect flow
* Clean up choose-account code
* Stop using placeholder in new-account-modal
* Remove unused styles in permission-page-container/index.scss
* Pass origin instead of site name to PermissionsConnectHeader in connect flow
* Make iconName a required prop in permissions-connect-header
* Show checkbox in cases where there is one account in the choose-account list
* Do not render select all checkbox when only 1 list item, instead of just hiding it
* Small cleanup in choose-account/index.scss
* Fix home container height
The home container element's height was not set, so the lower half of
the home component was showing as the wrong color when the user had no
transactions or tokens.
This was broken in #8271, which was a fix for a different CSS problem.
Both problems should remain fixed now with height being set explicitly.
* Remove obsolete `flex` rule
This element is no longer within a flex container as of #8271, so this
rule doesn't do anything.
We don't need to store the current UI type as a global. We're already
using the `getEnvironmentType` helper function throughout the UI, so
we'd might as well use that instead of this global state.
The `History` title above the transaction history was changed in #8264
to only show when there are pending transactions, because it was
redundant to show an additional `History` title below a tab called
`History`. It was preserved when there were pending transactions
because the pending transactions are shown first in the list, followed
by the history, so the title served to divide the two lists.
This ended up breaking the fullscreen view though, which doesn't use
tabs yet. It has been updated to always show on fullscreen.
Two tabs have been created on the home screen: 'Assets' and 'History'.
This tabbed view is shown only on small screens (e.g. in the popup).
The fullscreen view is unchanged.
The toggle-able left sidebar no longer exists, so some 'sidebar-left'
specific code and styles have been removed. The button in the menu bar
has been removed as well.
The 'History' title of the transaction history is now redundant when
where are no pending transactions, so it as been conditionally hidden.
A passthrough for `data-testid` has been added to the Tab component for
convenience in e2e tests.
The popup view would expand beyond the width of the viewport when
expanding a transaction. This bug was introduced in #8139 when I
removed the `min-width: 0` property from the `home__container` class;
this property was giving the parent permission to shrink that div below
the size of its content.
Instead of restoring that property, the parent component is no longer
using `display: flex`. Flexbox was never useful here, as this is just a
wrapper div around a wrapper div, both with identical sizes. The
default display type of `block` produces the desired behaviour with
less rules.
The Tabs component expects the `children` prop to be either a single
Tab component or an array of Tab components, and the internal tab index
should always map onto one of these components. However, if an invalid
tab index was set, it was just returning the first tab contents.
Instead it will now validate that the tab being asked for does exist,
and throw an error otherwise.
The pieces that we'll be referring to as the "Asset List" in the near
future have been extracted from WalletView into a separate AssetList
component. This list includes ETH, the tokens, and the 'Add Token'
button.
The styles were moved alongside this new component as well.
The token cell how shows a warning inline for the case where the token
balance failed to update. It displays a warning icon next to the
balance, with a tooltip that contains the same contents as was shown on
the token list previously.
The 'Add Token' component has been redesigned to be more in-line with
the new home screen design. The description instructing the user to
click the 'Add Token' button has been removed, and the section itself
has been made roughly the same size as one of the list item. The text
now appears on just one line, overflowing to two if necessary.
The 'interactive' prop for React Tippy will keep the tooltip open when
the user moves the mouse over the tooltip. This enables interactive
tooltips, where the user is expected to click on something in the
tooltip (e.g. a message with a link).
The styles for the TokenCell component have been moved to be alongside
the component. They have also been renamed from `token-list-item` to
match the component name.
This commit updates the existing _Connected Sites_ section to a modal using
the `Popover` component. This will serve as a base for the new modal design.
The official npm package for Font Awesome Free is now used instead of
the vendored styles. Previously we had been using v4.4.0, now we're
using v5.13.0.
We're now importing the Font Awesome SCSS modules instead of using the
minified CSS bundle. This integrates more cleanly into our build
system, and it lets us use their mixins directly in the future if we
need to.
The variable `fa-font-path` has been set to reference our font
directory, as instructed here:
https://fontawesome.com/how-to-use/on-the-web/using-with/sass#compile
Various SVGs were being imported directly in components using Webpack
loaders. This was done to get these components to work correctly in
storybook, which uses Webpack. However we don't use Webpack for our
actual build system, so these components would fail when you attempted
to use them.
Instead the storybook script has been updated to use the `--static-dir`
flag, which allows specifying a directory of files to serve statically.
The `app` directory is served statically, so all of the relative URLs
we use in practice to reference fonts and images should just work.
The storybook build command has been updated to use the same flag.
Unfortunately this also means that the uncompiled background code is
now included in the build as well, because it's alongside our static
files. This shouldn't have any impact upon the build though.
The use of this `static-dir` option as made much of the existing
storybook Webpack configuration unnecessary, so it has been reduced to
just the essential steps.
The token list would be stuck on "Loading" when there was at least one
token, but the balance of all tokens was zero. This bug was only
present on `develop`, and has not affected any published version of the
extension.
This was introduced in #8223, which removed what at the time seemed to
be an unnecessary update step. It turns out that the step was required
as a workaround to this bug with the token tracker.
The bug was fixed in https://github.com/MetaMask/eth-token-tracker/pull/33
and published in v2.0.0 of `@metamask/eth-token-tracker`.
The user-specified seed phrase during the first-time-flow import step
required the phrase to be entered in all lowercase. The case does not
add any extra entropy to the seed, so there's no reason to be case
sensitive. Flexibility here will improve the onboarding UX.
This commit makes the entered seed phrase case-insensitive.
Fixes#8171
* Refactor token list into standard container/component modules
The token list has been moved into its own directory and split into
separate container and component modules. Additional updates have been
made to simplify the component logic as well.
* Update token-list to use new React Context API
The token list click handler has been moved up from the token cell to
the wallet view component where the token list is used. This keeps the
responsibilities of the token list and token cell components a bit more
focused - they're now only responsible for display, not what the
effects of clicking should be.
The `network` prop was being passed to the Identicon despite that not
being an Identicon prop, and the `userAddress` prop was being passed
down by the container but was unused. The methods removed were not
called anywhere.
These tests broke when `sinon.restore()` was called in a separate test
because they setup stubs/spies using `sinon` in the module context.
These were constructed then restored before the tests even ran.
Instead the test doubles are now setup in the `beforeEach` hook, which
in addition to fixing this problem also ensures each unit test is
isolated from the others.
* Refactor tab styles to minimize tab component styles
The tab component styles were not applicable to all tab instances, so
they were being overridden in a few places. Instead the tab styles have
been reduced to a minimal set that should be applicable in most cases.
There are a few functional changes here as well, meant to undo
changes made accidentally in #8132. Before that PR the page container
was overriding the tab styles altogether, but after that PR they were
combined with the base tab styles instead.
* Remove background color
This was previously being overridden by the page container styles, and
it matches the inherited background color already in the one other case
(the confirm page for token interactions)
The "i18n-provider" module has been replaced by a new `i18n.js` module
in the `contexts` directory which provides the `t` function via the new
React Context API.
The legacy context API is still used throughout the codebase, so a
legacy context provider has also been added as a shim until we migrate
away from the old API. The migration does require changing every single
place where the `t` function is used, so it is a non-trivial amount of
work. This shim allows us to tackle it one piece at a time without
breaking anything.
This was placed in a new `contexts` directory because it didn't seem
to belong in any existing categories. It certainly isn't a higher-order
component.
The translation helper function we use everywhere (`t`) would fallback
to the message `[${key}]` for any key not found in the set of localized
messages. Instead it how returns `undefined` in that case.
`[${key}]` isn't something you'd typically want to show to users, so
this fallback wasn't overly useful in practice. At best it served to
hide errors.
The falsey return value in the case where the message is missing makes
it easier to implement a fallback for that case. Such a fallback is
used in the `confirm-transaction-base` component, to restore the
fallback behavior accidentally changed in #8211
When the token tracker is first constructed and the first balance
update is triggered, we manually serialize the tracker state and call
our update function. This is _in addition_ to the update event handler
though, so the balances get updated twice. Similarly, we also catch any
errors during this first update to handle them, but this is done via an
event as well, so is redundant.
These steps have been removed; updates and errors are now handled
solely through events. We were able to drop a check from
`updateBalances` as well to ensure the tracker is still running, as the
event cannot be emitted unless it's running.
* Add minimal working popover
* Fix styling of popover component
* Use lorem ipsum
* Update classnames and remove unrelated styles
* Remove unused components
* Add SVG close icon
* Add Close icon to icon stories
* Use div
* Use `addon-actions`
* Use `<button>` for close
* Fix button wobble in Firefox
* Remove border
These two functions were not especially useful. `tOrDefault` was used
only by `tOrKey`, and `tOrKey` was only used in one place. All it did
was return the given `key` directly if it was falsey, so it was easily
replaced by a condition.
Previously a few mostly-empty `div`s would be shown if a render
happened while the confirm page was loading. Now nothing is shown. This
shouldn't impact users at all, as this condition should only last a
fraction of a second.
* Add tx list-item component
New list item compoent for transaction history
* Simplify component logic and remove type checks
* Address remaining feedback
* Remove extra line
* Place className prop on its own line
* Rename to primaryCurrency and secondaryCurrency
* Make the title `isRequired`
* Fix no-undef
* Remove more + buttons to be implemented in seperate PR
* Add minimal store and I18nProvider to storybook
* Use Component to support translations
* Add `metamask` to store
* Rename decorator
The current selected asset in the asset list should be highlighted, but
this highlighting was broken for `ETH`. `ETH` was not highlighted when
it was selected, but it would be highlighted when anything else was.
This was broken accidentally in #7546
The method registry was being initialized with the global variable
`ethereumProvider` before that variable was set. As a result, the
method registry was falling back to an internally constructed provider
that used the wrong provider URL (an obsolete Infura API). This was
resulting in an error with the message "Project ID not found".
The method registry is now initialized lazily, when it's first needed.
This should be well after the initialization of `ethereumProvider`,
which occurs during the UI initialization.
The props `isActive` and `tabIndex of the Tab component are required
and are always passed in, but the prop type warning is triggered
because the tabs are rendered without these props first, then cloned by
the `Tabs` component, where these props are added.
To silence the warning, the props have been made optional.
The sidebar used to speed up a transaction while it's pending or after
it has failed currently allows editing the gas limit, but that new
limit is ignored. This is especially problematic for transactions that
failed due to a low gas limit, as the problem becomes impossible to fix
by retrying.
The gas limit specified by the user is now used in the speed up
transaction.
Fixes#8156Fixes#7977
The address is blank momentarily when navigating to the confirmation
screen when sending a token. The address is updated in a subsequent
render.
The ENS reverse resolution is now only attempted if the address is
given. It has also been updated to attempt resolution when the address
is finally set, which fixes the reverse resolution for token sends.
I had hoped to get rid of this interim render-without-address, but that
turned out to be a bit more challenging. The problem is that the UI
submits transactions through the provider just as a dapp would, and the
provider doesn't say when the transaction is submitted. The promise
returned doesn't resolve until after confirmation. We would have to
start calling the background methods directly and bypass the provider
to get the feedback we need, and that sounded potentially dangerous.
Definitely a challenge for another day.
The `metamask.send.from` field was assumed by various selectors to be
an object, but instead it was recently set to a string. The selectors
have been updated to assume it's a string, and to fetch the full
account object explicitly.
The selector `getSendFromObject` was repurposed for this, as that's
basically what it already did. The optional address parameter was
removed though, as that was only used to fetch the `from` address in
cases where the `send` state was set without there being a `from`
address set. That case is no longer possible, as the `from` address is
always set upon the initialization of the `send` state.
The `getSendFromObject` selector no longer fetches the 'name' of that
address from the address book state either. This property was not used
in either of the cases this selector was used.
The `createRetryTransaction` was accidentally removed from the
`gas-modal-page-container` component during a refactor in #7730.
Attempting to retry a transaction since that change has resulted in a
UI crash.
* Adds notification icon circles and associated storybook stories
* Fix image paths in circle-icon.stories and message-circle-icon.component
* Code improvements for icon circles PR: remove additional z-index, make iconSource required
* Use component story format in circle-icon.stories and message-circle-icon.stories
* Remove success and info circle icons, as not presently needed
* Rename message-circle-icon to alert-circle-icon
* Small code fix ups for alert-circle-icons
* Update i18n-helper to allow substitutions of react components and wrapping of translation substrings
* Simplify code in i18n-helper.js related to substitutions, including react substitutions.
* Remove wrapper support from i18n in favour of using translations in substitutions.
* Fix i18n-helper substitution logic: ensure correct index of substitution is applied
* Throw error if there are not enough substitutions for a translation phrase
* Adds unit tests for now i18n-helper substitution functionality
* Fix grammar, react element line spacing and test layout+readability in i18n-helper.test.js
The base component we use for dropdowns handles ensuring the dropdown
is closed when the user clicks outside the dropdown. This functionality
was accidentally broken in #7781 when converting it to an ES6 class.
The "Transaction View" component has been merged with the Home
component. The division between these two components seemed wrong
because the "Transaction View" contained the menu bar (distinctly a
"home" thing, not a "transaction" thing), and we will be adding more
non-transaction-related components shortly.
This also let us use a single `Media` component instead of two.
The notifications displayed on the home screen were being passed
through the `TransactionView` and `TransactionList` components before
being rendered. This was unnecessary because the notifications are
absolutely positioned.
They are now rendered directly in the home component where they're
defined. A helper function has been written to improve readability.
The styles used for the Home component were in the huge
"newui-sections" SCSS file. Instead they've been moved into an SCSS
module alongside the component, to follow our conventions.
The `main-container` class was left as-is because it is shared between
here and the settings page.
This effectively covers the `Tab` component as well, which doesn't
really make sense to showcase on its own.
One minor change was made to the actual `Tabs` component; `children`
was marked as a required prop. It doesn't render anything sensible if
they are omitted, and it always has at least one child in our codebase.
The tab component now sets the `tab` and `tab--active` classes
internally regardless what class is passed in. The convention in React
is to allow adding _additional_ classes via the `className` prop, not
to allow removing internal classes entirely.
the `activeClassName` prop was removed entirely. A few other props that
are always passed in have been marked as required.
One main configurable story has been added, plus a few distinct other
examples. All props are covered except `className`, which seems safe to
ignore.
Default props have been added to `Identicon` to make more explicit what
defaults were expected; there is no functional change.
The recommended way of writing stories changed in Storybook v5.2 to
the Component Story Format (CSF). Instead of using `storiesOf` and
running everything upon module import, the new story format is a
declarative description of each component that uses ES6 import
semantics.
Previously when the `diameter` prop of the `jazzicon` component was
changed, the new diameter would be ignored. The jazzicon is now
redrawn upon each change, as you would expect.
I don't think it's possible for this bug to manifest itself in the
extension. This was discovered through tinkering with the Storybook
for this component.
The identicon was showing as a white circle on the connect page. This
was a CSS error introduced when `jazzicon` was updated in #7898.
The white circle shown was the white border around the identicon. This
circle is an adjacent `div` in the DOM, and was rendered _underneath_
the identicon itself because it was placed first in the DOM.
Unfortunately the new version of `jazzicon` is no longer explicitly
positioned (it used to have `position: relative` set internally), so
now it's lower in the stack order regardless of DOM position.
Rather than placing the border adjacent and relying upon both elements
being positioned, the border has been changed into a wrapping `div`
instead. Now the stack order is more explicit.
In our base stylesheets we set the `body` background color to white.
This unfortunately also affected the preview area of Storybook. The
Storybook preview only renders isolated components, but it does
include all styles.
To avoid this problem, the white background color has been moved to
the `#app-content` div instead. All of our UI is inside this div.
Implement `eth_decrypt` and `eth_getEncryptionPublicKey`. This allows decryption backed by the user's private key. The message decryption uses a confirmation flow similar to the messaging signing flow, where the message to be decrypted is also able to be decrypted inline for the user to read directly before confirming.
ENS currently supports a variety of tlds in addition to `.eth`, and
more will be supported in the future. Rather than hard-code a list of
supported ENS tlds, all valid domain names will now be interpreted as
potential ENS addresses in our address input component.
Closes#7978
The QR scanner component error handling would sometimes redirect the
user to the wrong page. It was also confusingly handled in two places;
the action used to open the QR scanner, and the scanner component.
The error handling has now been corrected, simplified, and integrated
into the QR scanner component itself.
The old way of handling an error within the component was to close the
modal, then call the action to open it all over again. This action took
a route parameter, which instructed the action on which route to open
if the fullscreen UI needed to be opened (as the fullscreen UI is the
only one where the browser will show the camera permission prompt).
This redirection worked just fine for handling the initial opening
of the QR scanner modal. But for any subsequent errors the same action
was used with a _default route_, meaning the user could click "try
again" and find themselves on a completely different screen.
Instead, errors now trigger a state change instead of closing and re-
opening the modal. The permission checks in the action have been
integrated into the component as well.
One functional change is that the scenario where you have an invalid
QR code has been made an error. Previously this just showed the error
message below the video preview, but left the user with no way to try
again. There error page has a "Try again" button, so it seemed better
suited as an error. Also the message literally started with "Error:".
Another functional change is that _all_ errors during initialization
will result in the error UI being shown. Previously there was one error
case that would instead log to the console and leave the user stuck.
* Use @metamask/eslint-config@1.1.0
* Use eslint-plugin-mocha@6.2.2
* Mark root ESLint config as root
* Update Mocha ESLint rules with shared ESLint config
* Various component tests and some conditional statements
Conditional in account-menu in removeAccount when keyring sometimes is not initially provideed
Conditional on unlock-page when there is no target.getBoundingClientRect on the element.
* Update helpers
* Remove component debugging
* Add default params for render helpers
* Remove stubComponent for old Mascot
Changes in https://github.com/MetaMask/metamask-extension/pull/7893 has prevented the need to stub it out.
Change logout to lock in account-menu test
The custom spend limit was previously not validated. It did have a
minimum of zero set, but this didn't have any affect (that minimum is
used for form constraint validation, and this field wasn't in a form).
The field was never checked to ensure the contents didn't exceed the
maximum.
The field is now checked for values that exceed the maximum, and
invalid values in general (including negative values).
The parameters to the `showEditApprovalPermissionModal` were also
alphabetized to make them easier to read. In the course of doing this,
I noticed that the origin was missing from one of the calls. This was
responsible for the modal saying "Spend limit requested by undefined"
when clicking "Edit" under the transaction details. This has been
fixed.
These two functions differ slightly in options, but none of those
options are being used by us, so in these cases they're functionally
equivalent. They're even both descendants of the original `debounce`
function from `underscore`.
This was done to reduce the number of direct dependencies we have. It
should not affect bundle size, as we still depend upon the `debounce`
package transitively.
This was done to reduce the number of direct dependencies we have. It
should be functionally equivalent. The bundle size should not change,
as we use `clone` as a transitive dependency in a number of places.
In the case where the initial spend limit for the `approve` function
was set to the maximum amount, editing this value would result in the
new limit being silently ignored. The transaction would be submitted
with the original max spend limit.
This occurred because function to generate the new custom data would
look for the expected spend limit in the existing data, then bail if
it was not found (and in these cases, it was never found).
The reason the value was not found is that it was erroneously being
converted to a `Number`. A JavaScript `Number` is not precise enough to
represent larger spend limits, so it would give the wrong hex value
(after rounding had taken place in the conversion to a floating-point
number).
The data string is now updated without relying upon the original token
value; the new value is inserted after the `spender` argument instead,
as the remainder of the `data` string is guaranteed to be the original
limit. Additionally, the conversion to a `Number` is now omitted so
that the custom spend limit is encoded correctly.
Fixes#7915
* Use ref instead of findDOMNode in jazzicon component
The jazzicon component was using `findDOMNode` to get the DOM node for
the main div returned by the component, which is generally not
recommended. Instead a ref is now used.
* Update Jazzicon to v2
This version drops the dependency upon `raphael`, and no longer uses
the function `createSVGMatrix` which was causing unit tests to fail
(because it's not supported by jsdom).
After updating the custom spend limit on the approve screen, the data
for the transaction was not being updated. Instead it showed the
original transaction data. The transaction data was being updated
correctly in the final transaction though.
The approve screen has been updated to ensure changes to the custom
spend limit are reflected correctly in the data shown.
Update accounts permission history on accountsChanged
Create PermissionsLogController
Fix permissions activity log pruning
Add selectors, background hooks for better UX
Make selected account the first account returned
Use enums for store keys in log controller
Add last selected address history to PreferencesController
* Update lodash
All versions of the full `lodash` package have been updated to 4.17.15.
The only exception is v4.17.14 which is pinned by `ganache-core`.
* Switch to using `lodash` instead of per-method packages
We have the full lodash package _ten times_ as a production transitive
dependency, so including per-method packages is not saving space (it
might instead result in slightly more space being used).
Any error caught during a React component render or lifecycle method
will now be caught by the top-level error boundary, which shows the
user this new error page. The error page will display a simple error
message, and will show the details of the error in a collapsible
section.
The caught error is also reported to Sentry.
In development the error will be re-thrown to make it easier to see on
the console, but it is not re-thrown in production.
* Remove unnecessary `getEnvironmentType` parameter
The default value of the first parameter is `window.location.href`, so
there is no need to pass it in explicitly.
* Remove junk parameter from `getEnvironmentType` invocation
`getEnvironmentType` doesn't need to be passed any parameter, as the
default value is `window.location.href` which is generally what is
wanted. In this case, the variable `location.href` was always
`undefined` anyway. This particular `location` variable is from React
Router, and does not have an `href` property.
* Fix comment for `getEnvironmentType`
One of the possible return values was referred to by the wrong name.
`withRouter` has been removed from any components that were not using
any of the three props injected by `withRouter`: `history`, `location`,
and `match`.
`compose` is a no-op when called upon a single component, so it has
been removed in all such cases.
The WebRTC spec is fairly stable these days, particularly among the
browsers we support. We don't need this shim for anything. I'm guessing
it may have been added primarily with IE in mind.
The filename is seeded by a simple use of Math.random() pulling from an alphanumeric character bank, as opposed to a more cryptographically random solution. This provides a simple layer of difficulty for bad actors to seek out the recovery phrase file.
The 'can retype the seed phrase' test would fail sometimes when one of
the words in the seed phrase was a subset of another word (e.g. 'issue'
and 'tissue'). This is because the selector used to find the word
looked for the first element that contained the text, rather than an
exact match.
To simplify the selector and make it more reliable, test ids were added
to each seed phrase word. The selector now uses CSS instead of XPath,
and it only finds exact matches.
A test id was also added to the div containing the shuffled seed words
to select from, so that the chosen seed words wouldn't be selected
in place of the real target when the same word appears twice.
The `confirm-seed-phrase` component extends PureComponent, so it
doesn't need a `shouldComponentUpdate` function. The state is
effectively immutable, as all state is either a primitive type or is
updated with new instances rather than mutation.
Removing this function will silence a warning message printed to the
console during e2e tests (React doesn't want you to set this function
on `PureComponent`s).
Removing this function also exposed an unused piece of state, which has
also been removed.
The `withFixtures` helper will instantiate ganache, a web driver, and
a fixture server initialized with the given set of fixtures. It is
meant to facilitating writing small, isolated e2e tests.
The first example test has been added: simple-send. It ensures that the
user can send 1 ETH to another account.
These new e2e tests will run during the normal e2e test run.
Closes#6548
The e2e tests were failing intermittently after removing an account
because the account was shown as not deleted after the removal. I
suspect this was because the account _had_ been removed, but that
change to the background state hadn't yet propagated to the UI.
The background state is now synced before the loading overlay for
removing the account is removed, ensuring that the removed account
cannot be seen in the UI after removal.
* Remove unused functions from `mapDispatchToProps`
The actions import was also updated to import only the two actions
used, rather than all actions.
* Remove unused container component
Well, technically it was the props injected by this container that were
unused. The container served no purpose, so the component it surrounded
is now used directly instead.
* Remove both unused `getCurrentViewContext` selectors
* Remove unused SHOW_CONFIG_PAGE action
* Remove checks for `currentView` with name `config`
Now that the SHOW_CONFIG_PAGE action has been removed, it's no longer
possible for `currentView.name` to be set to that value.
* Remove unused `wallet-view` container props
* Delete unused SHOW_SEND_PAGE and SHOW_ADD_TOKEN_PAGE actions
* Remove unused `account-menu.container` props
* Remove unused SHOW_INFO_PAGE action
* Remove unused SET_NEW_ACCOUNT_FORM action
As of #7753, the `onBlur` prop is no longer used for the `token-input`
and `currency-input` components, and the associated wrapper components
and the shared underlying component. It as been removed from all of
them.
These rows on the Advanced Settings page were being looked up in the
e2e tests by the order they appeared in. Instead they're now referenced
by data id, so that we can add new settings and re-arrange them without
breaking the e2e tests.
The transaction navigation in the e2e tests has been made simpler with
the addition of data attributes to help with finding the navigation
buttons. Each button is now labelled according to its purpose.
* Specify type before parameter name
Various JSDoc `@param` entries were specified as `name {type}` rather
than `{type} name`.
A couple of `@return` entries have been given types as well.
* Use JSDoc optional syntax rather than Closure syntax
* Use @returns rather than @return
* Use consistent built-in type capitalization
Primitive types are lower-case, and Object is upper-case.
* Separate param/return description with a dash
This component used to persist form contents to LocalStorage. This was
especially useful for the popup UI, as each time the mouse left the
popup, the UI was completely torn down and state was lost.
This component was only being referenced by one form, and it wasn't
even being used there (e.g. no fields were labelled appropriately to
be persisted).
This was a useful component, and it seems this feature was lost
somewhere in the past couple of years. It was tempting to re-instate it
rather than delete it, but I decided not to because I'd likely approach
the problem differently if we wanted to reinstate it again today (maybe
by using a React Hook, or storing the state in Redux and persisting a
subset of the Redux store instead).
The account details close button is difficult to click from the e2e
tests because it has a size of zero. The actual icon is added via CSS
as an `::after` pseudo-element.
The CSS has been adjusted to give the icon a size, and it the markup
is now a `button` rather than a `div`.
These unused props weren't being caught by ESLint because this
component extended another, which I guess made it difficult for the
React plugin to determine what was unused.
The `componentWillUpdate` logic was moved into `componentDidUpdate` so
that it would be picked up by ESLint. Also it seemed like a sensible
place for it to go. Having three redundant gas updates as part of
the same lifecycle function seemed too far, so I ensured it's
only called once.
* Make gas estimate update on debounced token amount change, not just on blur after change
* Updated tests
* Ensure `updateGas` is bound early
Co-authored-by: Mark Stacey <markjstacey@gmail.com>
The "blockies" style identicon is handled by a module that was copied
from MyEtherWallet and inlined. This has been removed, and replaced
with the upstream package it was originally derived from.
* Add `react/no-unused-prop-types` rule
All detected unused prop types have been removed. I have attempted to
ensure these props are no longer passed in either.
* Update handling of props to avoid false positive lint errors
These cases were detected by `react/no-unused-prop-types` as being
unused props, even though they were used. These minor adjustments
prevent them from being flagged as errors.
* Update unit tests
Many of these tests were just checking that specific props were passed
from containers or to a child component. These were deleted, as I can't
imagine how they'd be useful.
* Disable `react/no-unused-prop-types` in `componentWillReceiveProps
The rule `react/no-unused-prop-types` doesn't seem to be detecting
props used within `UNSAFE_componentWillReceiveProps`. The two cases
have been disabled temporarily until we can replace these unsafe
lifecycle functions.
* Use arrow property initializer functions
* Use pure components where applicable
* Add UNSAFE_ prefix for deprecated lifecycle hooks
* Add allow UNSAFE_
* Removed unused "Component"
* Replace boron with 'fade-modal'
* Upgrade react/no-deprecated to an error
* Paste react-tooltip-component source directly
* Use arrow functions to bind `this`
* Add UNSAFE_ prefix
* Update react-redux, react-router-dom
* Remove things from inlined 'fade-modal'
* Adjust mountWithRouter to get unit tests passing again
* Remove domkit
* Add Wrapper to render-helpers
* Upgrade @storybook/addon-knobs
The connect route now takes a route parameter: the permissions request
id. This id is set whenever the permissions connect screen is opened,
ensuring that that tab is for that specific request alone.
This makes handling of multiple permissions requests a bit more
intuitive. Previously whenever opening multiple permissions requests,
the first one would be shown on each successive tab, whereas you
would expect each tab to show the request that prompted the tab to
open. Users may now address permissions request in whichever order
they'd like to, rather than being forced to deal with them
chronologically.
The MetaMask logo was throwing an exception because the `history` prop
from React Router wasn't being passed in. However, even if it was
passed in, clicking on the logo wouldn't have done anything because the
home route redirects back to the permission connect page.
Instead the logo now isn't given an `onClick` handler. The
`MetaFoxLogo` component has been updated to only set `cursor: pointer`
if given an `onClick` handler.
There were a few older actions that were written such that they assumed
`this` referred to the `actions` object. That assumption no longer held
as of #7561. These actions have been updated to refer directly to the
actions object instead.
The prop `prevIsAccountMenuOpen` was referenced in `prevProps`, despite
it not existing. It seems clear from the context that the intention
was to check the `isAccountMenuOpen` prop from `prevProps`, and name
the local variable `prevIsAccountMenuOpen`.
* add PermissionsController
remove provider approval controller
integrate rpc-cap
create PermissionsController
move provider approval functionality to permissions controller
add permissions approval ui, settings page
add permissions activity and history
move some functionality to metamask-inpage-provider
rename siteMetadata -> domainMetadata
add accountsChange notification to inpage provider
move functionality to inpage provider
update inpage provider
Remove 'Connections' settings page (#7369)
add hooks for exposing accounts in settings
rename unused messages in non-English locales
Add external extension id to metadata (#7396)
update inpage provider, rpc-cap
add eth_requestAccounts handling to background
prevent notifying connections if extension is locked
update inpage provider
Fix lint errors
add migration
review fixes
transaction controller review updates
removed unused messages
* Login Per Site UI (#7368)
* LoginPerSite original UI changes to keep
* First commit
* Get necessary connected tab info for redirect and icon display for permissioned sites
* Fix up designs and add missing features
* Some lint fixes
* More lint fixes
* Ensures the tx controller + tx-state-manager orders transactions in the order they are received
* Code cleanup for LoginPerSite-ui
* Update e2e tests to use new connection flow
* Fix display of connect screen and app header after login when connect request present
* Update metamask-responsive-ui.spec for new item in accounts dropdown
* Fix approve container by replacing approvedOrigins with domainMetaData
* Adds test/e2e/permissions.spec.js
* Correctly handle cancellation of a permissions request
* Redirect to home after disconnecting all sites / cancelling all permissions
* Fix display of site icons in menu
* Fix height of permissions page container
* Remove unused locale messages
* Set default values for openExternalTabs and tabIdOrigins in account-menu.container
* More code cleanup for LoginPerSite-ui
* Use extensions api to close tab in permissions-connect
* Remove unnecessary change in domIsReady() in contentscript
* Remove unnecessary private function markers and class methods (for background tab info) in metamask-controller.
* Adds getOriginOfCurrentTab selector
* Adds IconWithFallback component and substitutes for appropriate cases
* Add and utilize font mixins
* Remove unused method in disconnect-all.container.js
* Simplify buttonSizeLarge code in page-container-footer.component.js
* Add and utilize getAccountsWithLabels selector
* Remove console.log in ui/app/store/actions.js
* Change last connected time format to yyyy-M-d
* Fix css associated with IconWithFallback change
* Ensure tracked openNonMetamaskTabsIDs are correctly set to inactive on tab changes
* Code cleanup for LoginPerSite-ui
* Use reusable function for modifying openNonMetamaskTabsIDs in background.js
* Enables automatic switching to connected account when connected domain is open
* Prevent exploit of tabIdOriginMap in background.js
* Remove unneeded code from contentscript.js
* Simplify current tab origin and window opener logic using remotePort listener tabs.queryTabs
* Design and styling fixes for LoginPerSite-ui
* Fix permissionHistory and permission logging for eth_requestAccounts and eth_accounts
* Front end changes to support display of lastConnected time in connected and permissions screens
* Fix lint errors
* Refactor structure of permissionsHistory
* Fix default values and object modifications for domain and permissionsHistory related data
* Fix connecting to new accounts from modal
* Replace retweet.svg with connect-white.svg
* Fix signature-request.spec
* Update metamask-inpage-provider version
* Fix permissions e2e tests
* Remove unneeded delay from test/e2e/signature-request.spec.js
* Add delay before attempting to retrieve network id in dapp in ethereum-on=.spec
* Use requestAccountTabIds strategy for determining tab id that opened a given window
* Improve default values for permissions requests
* Add some message descriptions to app/_locales/en/messages.json
* Code clean up in permission controller
* Stopped deep cloning object in mapObjectValues
* Bump metamask-inpage-provider version
* Add missing description in app/_locales/en/messages.json
* Return promises from queryTabs and switchToTab of extension.js
* Remove unused getAllPermissions function
* Use default props in icon-with-fallback.component.js
* Stop passing to permissions controller
* Delete no longer used clear-approved-origins modal code
* Remove duplicate imports in ui/app/components/app/index.scss
* Use URL instead of regex in getOriginFromUrl()
* Add runtime error checking to platform, promise based extension.tab methods
* Support permission requests from external extensions
* Improve font size and colour of the domain origin on the permission confirmation screen
* Add support for toggling permissions
* Ensure getRenderablePermissionsDomains only returns domains with exposedAccount caveat permissions
* Remove unused code from LoginPerSite-ui branch
* Ensure modal closes on Enter press for new-account-modal.component.js
* Lint fix
* fixup! Login Per Site UI (#7368)
* Some code cleanup for LoginPerSite
* Adds UX for connecting to dapps via the connected sites screen (#7593)
* Adds UX for connecting to dapps via the connected sites screen
* Use openMetaMaskTabIds from background.js to determine if current active tab is MetaMask
* Delete unused permissions controller methods
* Fixes two small bugs in the LoginPerSite ui (#7595)
* Restore `providerRequest` message translations (#7600)
This message was removed, but it was replaced with a very similar
message called `likeToConnect`. The only difference is that the new
message has "MetaMask" in it. Preserving these messages without
"MetaMask" is probably better than deleting them, so these messages
have all been restored and renamed to `likeToConnect`.
* Login per site no sitemetadata fix (#7610)
* Support connected sites for which we have no site metadata.
* Change property containing subtitle info often populated by origin to a more accurate of purpose name
* Lint fix
* Improve disconnection modal messages (#7612)
* Improve disconnectAccountModalDescription and disconnectAllModalDescription messages
* Update disconnectAccountModalDescription app/_locales/en/messages.json
Co-Authored-By: Mark Stacey <markjstacey@gmail.com>
* Improve disconnectAccount modal message clarity
* Adds cancel button to the account selection screen of the permissions request flow (#7613)
* Fix eth_accounts permission language & selectability (#7614)
* fix eth_accounts language & selectability
* fix MetaMask capitalization in all messages
* Close sidebar when opening connected sites (#7611)
The 'Connected Sites' button in the accounts details now closes the
sidebar, if it is open. This was accomplished by pulling the click
handler for that button up to the wallet view component, where another
button already followed a similar pattern of closing the sidebar.
It seemed confusing to me that one handler was in the `AccountsDetails`
container component, and one was handed down from above, so I added
PropTypes to the container component.
I'm not sure that the WalletView component is the best place for this
logic, but I've put it there for now to be consistent with the add
token button.
* Reject permissions request upon tab close (#7618)
Permissions requests are now rejected when the page is closed. This
only applies to the full-screen view, as that is the view permission
requests should be handled in. The case where the user deals with the
request through a different view is handled in #7617
* Handle tab update failure (#7619)
`extension.tabs.update` can sometimes fail if the user interacts with
the tabs directly around the same time. The redirect flow has been
updated to ensure that the permissions tab is still closed in that
case. The user is on their own to find the dapp tab again in that case.
* Login per site tab popup fixes (#7617)
* Handle redirect in response to state update in permissions-connect
* Ensure origin is available to permissions-connect subcomponents during redirect
* Hide app bar whenever on redirect route
* Improvements to handling of redirects in permissions-connect
* Ensure permission request id change handling only happens when page is not null
* Lint fix
* Decouple confirm transaction screen from the selected address (#7622)
* Avoid race condtion that could prevent contextual account switching (#7623)
There was a race condition in the logic responsible for switching the
selected account based upon the active tab. It was asynchronously
querying the active tab, then assuming it had been retrieved later.
The active tab info itself was already in the redux store in another
spot, one that is guaranteed to be set before the UI renders. The
race condition was avoided by deleting the duplicate state, and using
the other active tab state.
* Only redirect back to dapp if current tab is active (#7621)
The "redirect back to dapp" behaviour can be disruptive when the
permissions connect tab is not active. The purpose of the redirect was
to maintain context between the dapp and the permissions request, but
if the user has already moved to another tab, that no longer applies.
* Fix JSX style lint errors
* Remove unused state
* Add support for one-click onboarding
MetaMask now allows sites to register as onboarding the user, so that
the user is redirected back to the initiating site after onboarding.
This is accomplished through the use of the `metamask-onboarding`
library and the MetaMask forwarder.
At the end of onboarding, a 'snackbar'-stype component will explain to the
user they are about to be moved back to the originating dapp, and it will
show the origin of that dapp. This is intended to help prevent phishing
attempts, as it highlights that a redirect is taking place to an untrusted
third party.
If the onboarding initiator tab is closed when onboarding is finished,
the user is redirected to the onboarding originator as a fallback.
Closes#6161
* Add onboarding button to contract test dapp
The `contract-test` dapp (run with `yarn dapp`, used in e2e tests) now
uses a `Connect` button instead of connecting automatically. This
button also serves as an onboarding button when a MetaMask installation
is not detected.
* Add new static server for test dapp
The `static-server` library we were using for the `contract-test` dapp
didn't allow referencing files outside the server root. This should
have been possible to work around using symlinks, but there was a bug
that resulted in symlinks crashing the server.
Instead it has been replaced with a simple static file server that
will serve paths starting with `node_modules` from the project root.
This will be useful in testing the onboarding library without vendoring
it.
* Add `@metamask/onboarding` and `@metamask/forwarder`
Both libraries used to test onboarding are now included as dev
dependencies, to help with testing. A few convenience scripts
were added to help with this (`yarn forwarder` and `yarn dapp-forwarder`)
The component has been updated to split the container from the base
component, and all hyperscript has been replaced with JSX. ES6 imports
are used throughout as well.
The units for the amounts shown on the approve screen in the
transaction fee section were missing. It appears that they were present
in an early version of the approve screen (#7271) but they got lost
somewhere along the way.
* Add additional url verification
* Add commas
* Address PR feedback
* Use URL over URI
* Update key in other languages
* Add stateKey check
* Split validateUrl into two separate methods
* Remove unused variable
* Add isValidWhenAppended method
Maker has upgraded its Dai token to "Multi-Collateral Dai" (MCD) and requires
all users interacting with Dai migrate their tokens to the new version. Dai
now exclusively refers to Multi-Collateral Dai and what was previouly called
Dai is now Sai (Single Collateral Dai).
In this description, Sai refers to what was (prior to the 2019-11-18) known as Dai.
Dai is the _new_ token.
This changeset:
1. Only affects users who had non-zero Sai at the old contract address
2. Displays a persistent notification for users with Sai
3. Updates the token symbol for users already tracking the Sai token
4. Bumps our direct and indirect eth-contract-metadata dependencies
The notification copy:
> A message from Maker: The new Multi-Collateral Dai token has been released. Your old tokens are now called Sai. Please upgrade your Sai tokens to the new Dai.
The copy is from the Maker team.
The home notification static height of 116px is too cramped for longer
messages, such as the one used for the Sai migration. The old height is
now used for the minimum height instead, with a margin to ensure the
text doesn't get too close to the buttons.
The 'beforeunload' handler was being bound to the module scope instead
of the instance scope, because the class was defined using prototypes
rather than the ES6 class syntax. The arrow functions were removed, and
the handler is now bound explicitly in the constructor.
This was first implemented in #7335, but the final version didn't work
because the `_beforeUnload` handler was not bound early, so `this` was
not defined when it was triggered.
* Set default advanced tab gas limit
The advanced tab of the transaction confirmation screen would enter
into an infinite loop and crash if the given gas price was falsy and
some interaction was made with the gas limit field.
To prevent this infinite loop, a default value of 0 has been set. The
user will still need to update the gas limit in order to confirm the
transaction, as zero is too low a gas limit (the lowest is 21000).
21000 cannot be the default gas limit at this layer, because the limit
used is from a layer above this, which wouldn't have that same 21000
set.
* Set default gas limit to minimum allowed
A transaction initiated from a dapp might not set a gas limit, which
would result in a default of zero being used in the advanced tab. The
default gas limit in that case has been changed to 21,000, the minimum
allowed gas limit, so that users aren't forced to manually update it.
The gas chart on the advanced tab was not converting the gas price
selected into hex before setting it in state, resulting in the UI
throwing errors and the price being set incorrectly. It now converts
in the same manner as the input fields.
* Use child components for multiple notifications component
The multiple notifications component has been updated to take its child
components as children rather than as a props array, so that the child
components are never executed in the case where they aren't needed.
* Fix threebox last updated proptype
* Redesign approve screen
* Add translations to approve screen components
* Show account in header of approve screen
* Use state prop bool for unlimited vs custom check in edit-approval-permission
* Set option to custom on input change in edit-approval-permission
* Allow setting of approval amount to unlimited in edit-approval-permission
* Fix height of confirm-approval popup
* Ensure decimals prop passted to confirm-approve.component is correct type
* Ensure first param passed to calcTokenValue in confirm-approve.util is the correct type
* Fix e2e test of permission editing
* Remove unused code from edit-approval-permission.container
* Omit MetaMask `extensionId` from site metadata
The site metadata was updated in #7218 to include the extension id of
the extension connecting to MetaMask. This was done to allow external
extensions to connect with MetaMask, so that we could show the id on
the provider approval screen.
Unbeknownst to me at the time, the extension id was being set for all
connections to MetaMask from dapps. The id was set to MetaMask's id,
because the connections are made through MetaMask's contentscript.
This has been updated to only set the id when accepting a connection
from a different extension.
* Fix `siteMetadata` property names
In #7218 a few things were added to the site metadata, so the provider
approval controller was middleware was updated to accept the site
metadata as an object rather than accepting each property as a separate
parameter. Unfortunately we failed to notice that the site name and
icon were named differently in the site metadata than they were in the
provider approval controller, so the names of those properties were
unintentionally changed in the controller state.
The provider approval controller has been updated to restore the
original property names of `siteTitle` and `siteIcon`. An unused prop
that was added to the provider approval page in #7218 has also been
removed.
On the signature request and transaction confirmation notification
pages, the closure of the notification UI implies that the request has
been rejected. However, this rejection is being submitted even when the
window is closed as a result of the user explicitly confirming or
rejecting. In practice, I suspect this has no effect because the
transaction, after being explicitly confirmed or rejected, has already
been moved out of a pending state. But just in case there is some
present or future edge case that might be affected, the `beforeunload`
handler is now removed once the user has explicitly made a choice.
This mistake was introduced recently in #7333
* Adds Wyre widget to the deposit modal.
* Move wyre widget code to vendor directory
* Get Wyre widget working without metamask connect/sign steps
* Code cleanup for wyre changes
* Change wyre widget to using prod environment
* Remove code allowing signing of wyre messages without confirmations
* Update wyre vendor code for wyre 2.0
* Remove unnecessary changes to provider approval constructor, triggerUI and openPopup
* Fix Wyre translation message
* Delete no longer used signature-request-modal
* Fix documentation of matches function in utils/util.js
* Code cleanup on wyre branch
* Remove front end code changes not needed to support wyre v2
* Refactoring signature-request out to a new component. Wip
* Styling polish and a better message display.
* Update signature request header to no longer use account dropdown mini
* Clean up code and styles
* Code cleanup for signature request redesign branch
* Fix signature request design for full screen
* Replace makenode with object.entries in signature-request-message.component.js
* Remove unused accounts prop from signature-request.component.js
* Use beforeunload instead of window.onbeforeunload in signature-request
* ENS Reverse Resolution support
* Save punycode for ENS domains with Unicode characters
* Update SenderToRecipient recipientEns tooltip
* Use cached results when reverse-resolving ENS names
* Display ENS names in tx activity log
* Add estimated time to pending transactions
* add sytles for pending transactions component
* add media queries styling for pending transactions component
* fix lint errors, remove extra spaces
* refactor code to call `fetchBasicGasAndTimeEstimates` method once
* refactor code to call `getgetRenderableTimeEstimate` method once
* fix, correct export to use `transaction-time-remaining-component`
* fix indentation issues after running `yarn lint`
* newBigSigDig in gas-price-chart.utils supports strings
* Code cleanup
* Ensure fetchBasicGasAndTimeEstimates is only called from tx-list if there are pending-txs
* Move gas time estimate utilities into utility file
* Move getTxParams to transaction selector file
* Add feature flag for display of remaining transaction time in tx history list
* Fix circular dependency by removing unused import of transactionSelector in selectors.js
* Use correct feature flag property name transactionTime
* Ensure that tx list component correctly responds to turning tx time feature on
* Prevent precision errors in newBigSigDig
* Code clean up for pending transaction times
* Update transaction-time-remaining feature to count down seconds, countdown seconds and show '< 30'
* Code clean up for transaction-time-remaining feature
* Cleanup beforeunload handler after transaction is resolved
The notification window was updated to reject transactions upon close
in #6340. A handler that rejects the transaction was added to
`window.onbeforeunload`, and it was cleared in `actions.js` if it was
confirmed or rejected.
However, the `onbeforeunload` handler remained uncleared if the
transaction was resolved in another window. This results in the
transaction being rejected when the notification window closes, even
long after the transaction is submitted and confirmed. This has been
the cause of many problems with the Firefox e2e tests.
Instead the `onbeforeunload` handler is cleared in the
`componentWillUnmount` lifecycle function, alongside where it's set in
the first place. This ensures that it's correctly unset regardless
of how the transaction was resolved, and it better matches user
expectations.
* Fix indentation and remove redundant export
The `run-all.sh` Bash script now uses consistent indentation, and is
consistent about only re-exporting the Ganache arguments when they
change.
* Ensure transactions are completed before checking balance
Various intermittent e2e test failures appear to be caused by React
re-rendering the transaction list during the test, as the transaction
goes from pending to confirmed. To avoid this race condition, the
transaction is now explicitly looked for in the confirmed transaction
list in each of the tests using this pattern.
* Enable all e2e tests on Firefox
The remaining tests that were disabled on Firefox now work correctly.
Only a few timing adjustments were needed.
* Update Firefox used in CI
Firefox v70 is now used on CI instead of v68. This necessitated
rewriting the function where the extension ID was obtained because the
Firefox extensions page was redesigned.
The class has been renamed to reflect that it is a header, to avoid
having the same name as the `ConfirmPageContainer` component. Multiple
components with the same name can lead to confusing error messages.
If the extension ID is set, an alternate title and subtitle are used
for the Connect Request screen. The title is always `External
Extension`, and the subtitle is `Extension ID: [id]` instead of the
origin (which would just be `[extension-scheme]://[id]` anyway).
The hostname for the site is used as a fallback in case it has no
title.
The artificial hostname set for internal connections has been renamed
from 'MetaMask' to 'metamask' because URL objects automatically
normalize hostnames to be all lower-case, and it was more convenient to
use a URL object so that the parameter would be the same type as used
for an untrusted connection.
* Start refactor
* Use import syntax
* Add create-account.component
* Continue refactor
* Add new line
* Start using JSX and make tabs a bit more DRY
* 👋 bye-bye hyperscript
* These can be disabled when active
* Start JSX in new account component
* 👋 bye-bye hyperscript
* Move newAccountNumber into container
* Validate newAccountNumber prop
* Begin mocking out retry ui
* Remove "Failed"
* I guess this works?
* Update corresponding test
* wip
* Ok, this appears to be working now
* cleanup
* Move this back to 3
* I don't think I need this
* Rename showRetry to showSpeedUp
* Address PR feedback
* Remove notes
* Rename shouldShowRetry -> shouldShowSpeedUp
* oops
* Use `AdvancedGasInputs` in `AdvancedTabContent`
The `AdvancedGasInputs` component was originally extracted from the
`AdvancedTabContent` component, duplicating much of the rendering
logic. They have since evolved separately, with bugs being fixed in one
place but not the other.
The inputs and outputs expected weren't exactly the same, as the
`AdvancedGasInputs` component converts the input custom gas price and
limit, and it converts them both in the setter methods as well.
The `GasModalPageContainer` had to be adjusted to avoid converting
these values multiple times.
Both components dealt with input debouncing separately, both in less
than ideal ways. `AdvancedTabContent` didn't debounce either field, but
it did debounce the check for whether the gas limit field was below the
minimum value. So if a less-than-minimum value was set, it would be
propogated upwards and could be saved if the user clicked 'Save'
quickly enough. After a second delay it would snap back to the minimum
value. The `AdvancedGasInputs` component debounced both fields, but
it would replace any gas limit below the minimum with the minimum
value. This led to a problem where a brief pause during typing would
reset the field to 21000.
The `AdvancedGasInputs` approach was chosen, except that it was
updated to no longer change the gas limit if it was below the minimum.
Instead it displays an error. Parent components were checked to ensure
they would detect the error case of the gas limit being set too low,
and prevent the form submission in those cases. Of the three parents,
one had already dealt with it correctly, one needed to convert the
gas limit from hex first, and another needed the gas limit check added.
Closes#6872
* Cleanup send components
Empty README files have been removed, and a mistake in the index file
for the send page has been corrected. The Gas Slider component class
name was updated as well; it looks like it was originally created from
`AdvancedTabContent`, so it still had that class name.
* Ensure correct transaction category when sending to contracts but there is no txParams data
* Update gas when pasting address in send
* Gracefully fall back is send.util/estimateGas when blockGasLimit from background is falsy
* Remove network request frontend fallback for blockGasLimit
* Add some needed slow downs to e2e tests
The placeholder for the custom nonce needed to be converted into a
string. The placeholder is omitted if `nextNonce` isn't set, as may be
the case for the initial render.
* Allow default nextNonce to be the custom nonce in cases where highest locally pending is higher than nextNonce
* Reset custom nonce in cases of transaction submission failures
* Make the recommended nonce in the custom nonce field the true 'nextNonce'
* Revert automatic setting of custom nonce to nextNonce
* Make the nextNonce the default placeholder value
* Fix getNextNonce
* Remove unused nonceFieldPlaceholder message
* Fix nits in getPendingNonce and getNextNonce
* Properly handle errors in getNextNonce
* Improve placeholder and value defaults in custom nonce field
* Remove custom error message from getNextNonce
* Add UseNonce toggle
* Get the toggle actually working and dispatching
* Display nonce field on confirmation page
* Remove console.log
* Add placeholder
* Set customNonceValue
* Add nonce key/value to txParams
* remove customNonceValue from component state
* Use translation file and existing CSS class
* Use existing TextField component
* Remove console.log
* Fix lint nits
* Okay this sorta works?
* Move nonce toggle to advanced tab
* Set min to 0
* Wrap value in Number()
* Add customNonceMap
* Update custom nonce translation
* Update styles
* Reset CustomNonce
* Fix lint
* Get tests passing
* Add customNonceValue to defaults
* Fix test
* Fix comments
* Update tests
* Use camel case
* Ensure custom nonce can only be whole number
* Correct font size for custom nonce input
* UX improvements for custom nonce feature
* Fix advanced-tab-component tests for custom nonce changes
* Update title of nonce toggle in settings
* Remove unused locale message
* Cast custom nonce to string in confirm-transaction-base.component
* Handle string conversion and invalid values for custom nonces in handler
* Don't call getNonceLock in tx controller if there is a custom nonce
* Set nonce details for cases where nonce is customized
* Fix incorrectly use value for deciding whether to getnoncelock in approveTransaction
* Default nonceLock to empty object in approveTransaction
* Reapply use on nonceLock in cases where customNonceValue in approveTransaction.
* Show warning message if custom nonce is higher than MetaMask's next nonce
* Fix e2e test failure caused by custom nonce and 3box toggle conflict
* Update nonce warning message to include the suggested nonce
* Handle nextNonce comparison and update logic in lifecycle
* Default nonce field to suggested nonce
* Clear custom nonce on reject or confirm
* Fix bug where nonces are not shown in tx list on self sent transactions
* Ensure custom nonce is reset after tx is created in background
* Convert customNonceValue to number in approve tranasction controller
* Lint fix
* Call getNextNonce after updating custom nonce
* Delete unused code
* Run threebox imports through migrations
* Remove 3box feature flag
* Remove unnecessary use of 'type' in threebox._updatePlugin
* Fix threebox controller getLastUpdated
* Turn off threebox by default
* Rename restoredFromThreeBox to showRestorePrompt
* Remove accientally added method from threebox controller
* Restore from threebox on import from unlock screen
* Throw on non 404 errors from Box.getconfig in new3Box
* Adds ab test controller with a fullScreenVsPopup test
* Add migration for fullScreenVsPopup state
* Move abtest state under an 'abtests' object.
* MetaMask shows fullScreen group of a/b test unapproved txs in a full browser tab
* Ensure cancel metrics event in confirm-transaction-base.component.js is sent in all cases
* Switch to existing tab for unapproved tx if it exists when opening in full screen
* Send metrics event for entering a/b test from confirm screen
* Fix lint, unit and integration tests related to a/b test code
* Remove unnecessary tabs.query call in triggerUiInNewTab
Any missing messages in the `en` locale are now reported to Sentry as
errors. They are printed to the console as an error upon the first
encounter as well.
If a missing message is found during e2e testing, the error is thrown.
This will likely break the e2e test even if it isn't looking for
console errors, as the UI with the missing message will fail to render.
The `tOrDefault` method was updated to no longer attempt looking for
messages with a key that is a falsey value (e.g. `undefined`). There
are a few places where they key is determined dynamically, where it's
expected during the normal flow for it to be `undefined` sometimes.
In these cases we don't want the error to be thrown.
* Switch to using string literals for locale keys
Various message keys were being specified with a string template
instead of a string literal. They have been switched to use string
literals so that the script for detecting unused messages can find
them.
* Remove unused locale messages
A number of unused locale messages have been removed - probably
leftover from old UI elements that have since been removed.
The `verify_locale_strings` script has been augmented to search the UI
for string literals, and match those against the locale message keys in
the `en` locale. Any messages without a corresponding string literal
are assumed to be unused.
The script has also been updated with an optional `--fix` parameter,
which will automatically delete any unused messages from locales.
148 unused messages were found in this case, out of a total of about
650 messages. Another 70 messages are _potentially_ unused and require
further investigation, but weren't as easy to rule out because they
were found in string literals.
* Remove additional unused locale messages
The following messages were more difficult to rule out because they
were present as string literals in the UI. They do appear to be
unused as locale keys though.
* Remove unused sendWarnings
The send warnings state and associated component is no longer used
anywhere.
* Remove unused subtitleParams
The `subtitleParams` SendHeader prop was being ignored. It has been
removed, along with associated selectors and tests.
* Adds threebox controller
* Adds threebox approval modal
* Fix unit tests and lint after addition of threebox
* Correct threebox behaviour after rejecting request for backup; fixes e2e tests.
* Update threebox controller for automatic syncing
* Ensure frontend locale updates when preferences are changed via direct update within controller
* Add toggle in settings for 3box syncing
* Update threebox controller for latest 3box version
* Delete unnecessary frontend changes for threebox integration
* Backing up address book contacts with threebox
* Update unit tests for 3box-integration additions
* Only enable threebox by default for new wallets
* Mock globals for correct unit tests
* 3box '1.10.2' -> '^1.10.2'
* Correct capilalization on 3Box
* Use log.debug instead of console.log in threebox controller
* Update yarn.lock
* Remove edge build
* Split 3box module into background deps js file
* extra bundle opts for bg-libs
* sync yarn.lock
* new3Box logic
* Show confirm threebox restore after import
* Remove bg-libs.js from manifest file for dev builds
* Switch 3Box controller to using the spaces api (instead of the profile api)
* Finalize switching to spaces api and only restoring from 3box after import
* Update metamask-controller-test.js for threebox controller changes
* Make threebox modal style consistent with others and update success button wording
* Use mock 3box when in test
* Correct 3box modal header
* Remove unnecessary property of threebox controller provider
* Remove unnecessary method calls after restoration from 3box in the threebox-restore-confirm modal.
* Replace setThreeBoxSyncingPermission calls in routes/index.js with turnThreeBoxSyncingOn
* Replace erroneous use of with
* Replace erroneous use of threeboxSyncing with threeBoxSyncingAllowed in advancted-tab directory
* Lint fixes for 3box changes
* Log errors encountered when updating 3Box
* Remove unnecessary parameter from state update
* Add timeout to initial 3Box sync
The initial 3Box sync will now timeout after 1 minute. If the timeout
is triggered, 3Box is disabled and cannot be re-enabled unless the
initial sync does finally finish. If it never finishes, 3Box cannot
be enabled unless the extension is reinstalled.
The Advanced Settings page was updated to show this option as disabled
in that circumstance, with a new discription explaining why it's
disabled. The UI here could certainly be improved.
Additionally, "on" and "off" labels were added to the toggle to match
the other toggles on the Advanced Settings page.
* Use non-minified 3Box module
We had previously used the minified 3Box module to avoid a build error
encountered when `envify` was processing the `libp2p` module (which is
used by 3Box). The build would fail because `esprima` (used by `envify`)
is incompatible with the object spread/rest operator (which is used in
`libp2p`).
That issue has been solved by adding a global Babelify transformation
specifically for transpiling out the object rest/spread operator from
dependencies. It has been targetted to only affect `libp2p` to avoid
extending the build time too much. This workaround can be used until
a new version of `esprima` is released that includes this bug fix.
* Use app key addresses for threebox
* Replace use of modal for confirming 3box restoration with a home notification
* Adds e2e tests for restoring from threebox
* Update eth-keyring-controller to 5.1.0
* Correct parameters passed to getAppKeyAddress in threebox.js
* Add prefix to origin passed to getAppKeyAddress in threebox.js
* Remove unused locale message.
* Prevent CORS errors in firefox e2e tests
* Ensure extraneous scripts are excluded from the local test dev build
* Move threeBoxLastUpdate state from home.component to redux
* Threebox PR code cleanup
* Always use first address when initializing threebox
* Replace setRestoredFromThreeBox api with setRestoredFromThreeBoxToFalse and setRestoredFromThreeBoxToTrue
* Update development/metamaskbot-build-announce.js to include ui-libs and bg-libs in hard coded bundle list
* Update test/e2e/threebox.spec.js to use new helpers added with pull #7144
* Make setFeatureFlag available on the ui window during testing
* Hide threebox feature behind a feature flag that can only be activated via dev console
* Remove unnecessary migration of threebox feature flag
* Prevent this.init() call in threebox constructor if feature flag is not turned on
* Prevent threebox notification from showing if feature flag is falsy
* http://localhost/8889 -> http://localhost/* in gulp manifest:testing tasks
Speeding up anything but the pending transaction with the lowest nonce
is ineffectual, as the transaction with the lowest nonce blocks the
others from completing first. The inline speed-up button in the
transaction activity log has been removed for these invalid cases.
The button will show up in the activity log for the pending transaction
with the lowest nonce, but not for the others.
Closes#6844
* Prevent multiple warnings for the same locale message
Our i18n helper issues warnings whenever a requested message is
missing. These warnings are helpful in assisting translation efforts,
but they can be distracting otherwise. They're especially problematic
for locales that are missing many messages. My browser ended up
crashing on more than one occasion due to the sheer volume of warnings.
The warning has been updated to only be issued once per missing key.
This required updating the method to pass in the current locale. The
current locale was added to the warning itself as well, which could be
helpful for cases where a message is missing in both the current locale
and the fallback ('en').
* Change locale and localeMessages as single action
Updating the current locale and the locale messages resulted in two
renders, and during the first the state was inconsistent (it would say
the locale had changed to the new one, but still be using the old set
of locale messages). Instead the locale is now updated with one atomic
action.
This was required after adding the locale to the missing locale message
warning, as otherwise it would say the message was missing from the
wrong locale.
The `fetch-with-cache` utility was failing to actually cache anything.
It would cache an object with cache time and URL, and would return that
instead of a valid response. This resulted in the error:
`TypeError: fourByteResponse.json is not a function`
The utility was updated to call `.json()` within itself, and cache the
JSON response. The function signature was updated as well, to expect an
options object instead of just the `cacheRefreshTime` option. The
timeout was added to this options object, which helped with testing.
The utility method now also handles unsuccessfull responses, and
incompatible `fetch` options.
* Create RTL stylesheets using `gulp-rtl`
* Handle RTL stylesheet special cases
Certain blocks of Sass were set to bypass "rtlcss" using ignore
comments. Certain icons had to be flipped 180 degrees.
* Switch stylesheets when locale changes
A second stylesheet has been added to each HTML page for use with
right-to-left locales. It is disabled by default. It is enabled on
startup if a RTL locale is set, and when switching to a RTL locale.
Similarly the LTR stylesheet is disabled when a RTL locale is used.
Unfortunately there is an unpleasant flash of unstyled content when
switching between a LTR and a RTL locale. There is also a slightly
longer page load time when using a RTL locale (<1s difference). We
couldn't think of an easy way to avoid these problems.
* Set `dir="auto"` as default on `TextFields`
The privacy mode notification was not able to be dismissed from the
popup UI. It should have been dismissed after clicking "Learn more",
but that button opens a new tab first before dismissing the flag.
Opening the new tab kills the pop UI process before it has a chance
to set that flag, so it never gets set.
Re-ordering the handler to set the flag first avoids this problem.
* Add missing test descriptions
* Fix async tests that expect a rejection
These tests expected the function under test to return a rejected
promise, and had assertions to be run in the `catch` clause. However,
the tests would still pass if the function didn't reject, with
the assertions never being run.
The tests have been updated to fail if the function doesn't throw.
* Handle ignored promise rejection
In the case where `forceUpdateMetamaskState` rejects, the function
`setSeedPhraseBackedUp` would never resolve. It has been updated to
pass along the rejection instead.
* Return after rejecting promise in action
A few actions would continue after encountering an error, resulting in
errors being compounded. Instead all actions will now return after
encountering an error (which it looks like was the intention in these
cases anyway).
In the case where the block gas limit in the MetaMask state is blank,
an exception is sometimes thrown when that blank value is passed to
`multiplyCurrencies` to be parsed as a hex number.
Instead the minimum gas limit is now used instead whenever the block
gas limit is falsy. This was already being done in one case anyway.
The token amount displayed when confirming a token transaction was
wrongly being converted to a string in the container. As a result, the
conversion into the user's preferred currency would fail.
A default value of '0' was added for the token amount as well, to
prevent `undefined` from being rendered as the value. Really the value
should never be undefined, but it was rather difficult to handle that
case without a deeper investigation into how it might occur. The 0
default is consistent with existing rendering logic.
* Fix styling of `.transaction-list`
* Filter `incomingTxListSelector` by network as well
* Start and stop block tracker polling in incoming tx controller
* Add fetch with abort in bg for `IncomingTxController`
* Nix notification for Share Address
* Add Connections settings tab in place of privacy mode toggle
* Split ProviderApprovalController into two stores
* Remove privacyMode feature flag altogether
* Add migration to remove privacyMode feature flag
* Ensure address book send flow correctly matches address book addresses to ens addresses
* Use nodify on background.setAddressBook to receive correct result in actions.js
* Better error handling for actions.js addToAddressBook
* Eliminate unnecessary data normalization and move more data manipluation to ens-input and send-content containers
A hidden overlay was preventing interactions with the lower 356 pixels
in the popup view when there are zero notifications. It was also
preventing interactions with the 100 pixels above the notifications in
the case where there were two notifications, which obscured the `Send`
button.
The first problem was solved by ensuring the notification wrapper isn't
rendered when there are no notifications. The second problem was solved
by updating the notification wrapper style to avoid setting a height.
* Open backup challenge screen, prompted from notification, in browser window
* Remove no longer used showingSeedPhraseBackupAfterOnboarding related code
* Make incremental-security.spec.js click through the seed phrase success screen
* Fix address book name saving and ens input errors on good inputs on unsupported networks
* Add initial e2e test for address book send flow.
* No longer need to click recipient row in e2e tests
* Click write button in address book e2e test on seed confirm screen
* Use correct seed phrase and private key in address-book.spec tests
* Replace use of backup-notification with use of home notification
* Pin notifications relative to window
* Remove unneeded isRequired condition on some home.component properties
* Refactor rendering of home notifications
* UX for multiple notifications
* Adds dismissal to provider request notification.
* Fix test failures
The e2e tests have been updated to reference `home-notification`
classnames instead of the removed `background-notification`. The
active tab proptypes and default values were updated as well.
The notice asking whether you wanted to connect to a site was showing
up in places it shouldn't, like on the Firefox/Chrome settings pages
and on our fullscreen extension. It has now been restricted to only
be displayed for active tabs with specific protocols:
* http
* https
* dat
* dweb
* ipfs
* ipns
* ssb
This prevents the notice from being shown on settings pages, browser
extensions, and files such as PDFs.
The seed phrase reminder will now be triggered if the user has eth *OR*
if the user has added a token. This is to ensure that a user can't have
a positive token balance without being reminded to backup the account.
Checking for the token in preferences was easier than checking the
actual token balance, because the token balance is not yet in Redux.
That would require a more substantial refactor.
* Implements ability to defer seed phrase backup to later
* Adds incremental-security.spec.js, including test dapp that sends signed tx with stand alone localhost provider
* Update metamask-responsive-ui for incremental account security changes
* Update backup-notification style and fix responsiveness of seed phrase screen
* Remove uneeded files from send-eth-with-private-key-test/
* Apply linguist flags in .gitattributes for send-eth-with-private-key-test/ethereumjs-tx.js
* Improve docs in controllers/onboarding.js
* Clean up metamask-extension/test/e2e/send-eth-with-private-key-test/index.html
* Remove unnecessary newlines in a couple first-time-flow/ files
* Fix import of backup-notification in home.component
* Fix git attrs file
* Style Send Header
* Move Send to-row to send view and restyle
* Add "Recents" group to select recipient view
* Rename SendToRow to AddRecipient
* Basic UI and Layout
* New ENSInput component
* wip - fuzzy search for input
* small refactor
* Add Dialog
* contact list initial
* initial error on invalid address
* clean up edit
* Click to open modal
* Create AddToAddressBookModal component
* Modal styling and layout
* modal i18n
* Add to Addressbook
* ens wip
* ens wip
* ENS Resolution
* Reset input
* Send to explicit address
* Happy Path Complete
* Add back error checking
* Reset send-to when emptying input
* Add back warning object
* Fix linter
* Fix unit test #1 - fix import paths
* Remove dead tests
* One more to go
* Fix all unit tests
* add unit test for reducers and actions
* test rendering AddRecipient
* Add tests for dialog boxes in AddRecipient
* Add test for validating
* Fix linter
* Fix e2e tests
* Token send e2e fix
* Style View Contact
* Style edit-contact
* Fix e2e
* Fix from-import-beta-ui e2e spec
* Make section header say "add recipient” by default
* Auto-focus add recipient input
* Update placeholder text
* Update input title font size
* Auto advance to next step if user paste a valid address
* Ellipsify address when recipient is selected
* Fix app header background color on desktop
* Give each form row a margin of 16px
* Use .container/.component naming pattern for ens-input
* Auto-focus on input when add to addressbook modal is opened; Save on Enter
* Fix and add unit test
* Fix selectors name in e2e tests
* Correct e2e test token amount for address-book-send changes
* Adds e2e test for editing a transaction
* Delete test/integration/lib/send-new-ui.js
* Add tests for amount max button and high value error on send screen to test/e2e/metamask-ui.spec.js
* lint and revert to address as object keys
* add chainId based on current network to address book entry
* fix test
* only display contacts for the current network
* Improve ENS message when not found on current network
* Add error to indicate when network does not support ENS
* bump gaba
* address book, resolve comments
* Move contact-list to its own component
* De-duplicate getaddressbook selector and refactor name selection logic in contact-list-tab/
* Use contact-list component in contact-list-tab.component (i.e. in settings)
* Improve/fix settings headers for popup and browser views
* Lint fixes related to address book updates
* Add 'My accounts' page to settings address book
* Update add new contact button in settings to match floating circular design
* Improve styles of view contact page
* Improve styles and labels of the add-contact.component
* Further lint fixes related to address book updates
* Update unit tests as per address book updates
* Ensure that contact list groups are sorted alphabetically
* Refactor settings component to use a container for connection to redux; allow display of addressbook name in settings header
* Decouple ens-input.component from send context
* Add ens resolution to add contact screen in settings
* Switching networks when an ens address is shown on send form removes the ens address.
* Resolve send screen search for ensAddress to matching address book entry if it exists
* Show resolved ens icon and address if exists (settings: add-contact.component)
* Make the displayed and copied address in view-contact.component the checksummed address
* Default alias state prop in AddToAddressBookModal to empty string
* Use keyCode to detect enter key in AddToAddressBookModal
* Ensure add-contact component properly updates after QR code detection
* Fix display of all recents after clicking 'Load More' in contact list
* Fix send screen contact searching after network switching
* Code cleanup related to address book changes
* Update unit tests for address book changes
* Update ENS name not found on network message
* Add ens registration error message
* Cancel on edit mode takes user back to view screen
* Adds support for memo to settings contact list view and edit screens
* Modify designs of edit and view contact in popup environment
* Update settings content list UX to show split columns in fullscreen and proper internal navigation
* Correct background address book API usages in UI
The `accounts` prop of `SignatureRequest` was throwing a PropType
warning because `accounts` was an object instead of an array. It looks
like when the `mergeProps` function was added in #6340, the ownProps
were accidentally set to override the state props.
The now ignored props have been removed from the parent `ConfirmTxScreen`
component as well. `conversionRate` was identical to the one retrieved
in `SignatureRequest`, and `selectedAddress` differed only in the
fallback behaviour when `state.metamask.selectedAddress` does not exist;
it will now default to the first account instead (as was the original
behavior, prior to #6340).
`seedWords` used to be stored on the metamask state temporarily at
certain points. This hasn't been the case since #5994, but references
to this state remained. All of the logic remained for correctly updating
these `seedWords`, handling them during navigation, and scrubbing them
from the state.
However the state was never updated in practice. The `seedWords` are
still returned by `verifySeedPhrase`, and they're still stored in
component state in a few places. But they aren't ever set in the Redux
metadata state or the Preferences controller.
All references to this state have been removed, along with any logic
for interacting with this state. A few unused actions were removed as
well.
The `AccountDropdownMini` component featured the ability to switch
accounts using a dropdown, but this functionality was disabled in #6024.
It has been acting as a restyled `AccountListItem` since then.
The component has been removed, and the style changes moved to the sole
parent component (`RequestSignature`).
The `time-remaining` component hasn't been used since #5704, aside from
a few styles. Those styles have been integrated into the
`advanced-tab-content` styles, and the unused component has been
deleted.
The CSS is now served as an external file instead of being injected.
This was done to improve performance. Ideally we would come to a middle
ground between this and the former behaviour by injecting only the CSS
that was required for the initial page load, then lazily loading the
rest. However that change would be more complex. The hope was that
making all CSS external would at least be a slight improvement.
Performance metrics were collected before and after this change to
determine whether this change actually helped. The metrics collected
were the timing events provided by Chrome DevTools:
* DOM Content Loaded (DCL) [1]
* Load (L) [2]
* First Paint (FP) [3]
* First Contentful Paint (FCP) [3]
* First Meaningful Paint (FMP) [3]
Here are the results (units in milliseconds):
Injected CSS:
| Run | DCL | L | FP | FCP | FMP |
| :--- | ---: | ---: | ---: | ---: | ---: |
| 1 | 1569.45 | 1570.97 | 1700.36 | 1700.36 | 1700.36 |
| 2 | 1517.37 | 1518.84 | 1630.98 | 1630.98 | 1630.98 |
| 3 | 1603.71 | 1605.31 | 1712.56 | 1712.56 | 1712.56 |
| 4 | 1522.15 | 1523.72 | 1629.3 | 1629.3 | 1629.3 |
| **Min** | 1517.37 | 1518.84 | 1629.3 | 1629.3 | 1629.3 |
| **Max** | 1603.71 | 1605.31 | 1712.56 | 1712.56 | 1712.56 |
| **Mean** | 1553.17 | 1554.71 | 1668.3 | 1668.3 | 1668.3 |
| **Std. dev.** | 33.41 | 33.43 | 38.16 | 38.16 | 38.16 |
External CSS:
| Run | DCL | L | FP | FCP | FMP |
| :--- | ---: | ---: | ---: | ---: | ---: |
| 1 | 1595.4 | 1598.91 | 284.97 | 1712.86 | 1712.86 |
| 2 | 1537.55 | 1538.99 | 199.38 | 1633.5 | 1633.5 |
| 3 | 1571.28 | 1572.74 | 268.65 | 1677.03 | 1677.03 |
| 4 | 1510.98 | 1512.33 | 206.72 | 1607.03 | 1607.03 |
| **Min** | 1510.98 | 1512.33 | 199.38 | 1607.03 | 1607.03 |
| **Max** | 1595.4 | 1598.91 | 284.97 | 1712.86 | 1712.86 |
| **Mean** | 1553.8025 | 1555.7425 | 239.93 | 1657.605 | 1657.605 |
| **Std. dev.** | 29.5375 | 30.0825 | 36.88 | 37.34 | 37.34 |
Unfortunately, using an external CSS file made no discernible improvement
to the overall page load time. DCM and L were practically identical, and
FCP and FMP were marginally better (well within error margins).
However, the first paint time was _dramatically_ improved. This change
seems worthwhile for the first paint time improvement alone. It also
allows us to delete some code and remove a dependency.
The old `css.js` module included two third-party CSS files as well, so
those have been imported into the main Sass file. This was easier than
bundling them in the gulpfile.
The resulting CSS bundle needs to be served from the root because we're
using a few `@include` rules that make this assumption. We could move
this under `/css/` if desired, but we'd need to update each of these
`@include` rules.
Relates to #6646
[1]: https://developer.mozilla.org/en-US/docs/Web/Events/DOMContentLoaded
[2]: https://developer.mozilla.org/en-US/docs/Web/Events/load
[3]: https://developers.google.com/web/fundamentals/performance/user-centric-performance-metrics
