The benchmark script can now be set to retry upon failure, like the E2E
tests do. The default is zero, just as with the E2E tests. A retry of 2
has been set in CI to match the E2E tests as well.
The `retry` module had to be adjusted to throw an error in the case of
failure. Previously it just set the exit code, but that only worked
because it was the last thing called before the process ended. That is
no longer the case.
This script makes it easier to run an individual E2E test. In the past
I've run individual scripts by editing `run-all.sh` manually, but now
that can be done more easily with this script. It also allows setting
the number of retries to use and the browser to use from the CLI.
This script has been added as an npm script as well, called
'test:e2e:single'.
The `run-all.sh` script was rewritten in JavaScript to make it easier
to pass through a `--retries` argument.
The default number of retries has been set to zero to make local
testing easier. It has been set to 2 on CI.
This was mainly done to consolidate the code used to run an E2E test in
one place, to make later improvements easier.
The function we were using to run shell commands during the
`sentry:publish` script were swallowing the CLI output. We also weren't
correctly detecting the process exit in some cases.
The `run-command` module originally written for `auto-changelog`
(introduced in #10782 and replaced in #10993) has been resurrected for
running commands where we don't care about the output, or where we want
to use the output for something. A second function (`runInShell`) has
been added for running commands with the same STDOUT and STDERR
streams, so that the output is sent directly to the CLI. This ensures
that the console output from the shell script we run gets correctly
output to the CLI.
Sentry is now configured with environment variables, rather than with
hard-coded values. This makes it easier to test Sentry functionality
using a different Sentry account, as we did recently during QA of
v9.5.1.
The only change for the normal build process is the introduction of the
`SENTRY_DSN_DEV` variable, which can be set via `.metamaskrc` or via an
environment variable. This determines where error reports are sent. It
still defaults to our team Sentry account's `metamask-testing` project.
The `sentry:publish` script now requires SENTRY_ORG and SENTRY_PROJECT
to be set in order to publish release artifacts. The CircleCI
configuration has been updated with these values, so it should act the
same as it did before. Previously we had used a CLI flag to specify the
organization and project, but Sentry already natively supports these
environment variables [1].
[1]: https://docs.sentry.io/product/cli/configuration/#configuration-values
The method used for uploading release artifacts to Sentry has been
updated to allow `sentry-cli` to associate our minified bundles with
the corresponding source map file. This should help Sentry display rich
stack traces.
Previously Sentry had used the `sourceMappingURL` to associate source
maps with bundles, but we recently removed this in #10695. The hope is
that this change to the upload process will ensure the mapping works
correctly without the `sourceMappingURL` comment.
The `upload_bundles` function was removed because the later
`upload_sourcemaps` function actually uploaded both the bundles and
source maps.
The `--rewrite` flag was added to enable a newer "rewrite" feature of
the Sentry CLI that they recommend using [1]. This rewrite is where
they associate source maps with bundles.
The `url-prefix` has been updated to be `metamask` rather than
`sourcemaps`. I don't think `sourcemaps` was ever the correct prefix.
We normalize our errors to have the path `metamask/` before sending any
reports to Sentry.
[1]: https://docs.sentry.io/product/cli/releases/#sentry-cli-sourcemaps
The version field is now stored in the main `package.json` file rather
than in the base manifest. It is built into the final manifest during
the build script.
This makes it easier to communicate what the current version should be
to our `auto-changelog` script. It's also generally a more conventional
place to keep track of the version, even considering that we're not
publishing to npm.
The `auto-changelog` script has been replaced with the package
`@metamask/auto-changelog`. This package includes a script that has
an `update` command that is roughly equivalent to the old
`auto-changelog.js` script, except better. The script also has a
`validate` command.
The `repository` field was added to `package.json` because it's
utilized by the `auto-changelog` script, and this was easier than
specifying the repository URL with a CLI argument.
The `auto-changelog.js` script crashes when trying to add a new release
header. This bug was introduced in #10847. The cause was a simple
misnamed parameter.
When updating the changelog for a release candidate, any unreleased
changes are now migrated to the release header.
Generally we don't make a habit of adding changes to the changelog
prior to creating a release candidate, but if any are there we
certainly don't want them duplicated.
The `auto-changelog.js` script has been refactoring into various
different modules. This was done in preparation for migrating this to
a separate repository, where it can be used in our libraries as well.
Functionally this should act _mostly_ the same way, but there have been
some changes. It was difficult to make this a pure refactor because of
the strategy used to validate the changelog and ensure each addition
remained valid. Instead of being updated in-place, the changelog is now
parsed upfront and stored as a "Changelog" instance, which is a new
class that was written to allow only valid changes. The new changelog
is then stringified and completely overwrites the old one.
The parsing had to be much more strict, as any unanticipated content
would otherwise be erased unintentionally. This script now also
normalizes the formatting of the changelog (though the individual
change descriptions are still unformatted).
The changelog stringification now accommodates non-linear releases as
well. For example, you can now release v1.0.1 *after* v2.0.0, and it
will be listed in chronological order while also correctly constructing
the `compare` URLs for each release.
The changelog script now accepts an `--rc` flag to tell it whether to
add new changes to `Unreleased` or to the header for the current
version.
Previously this was inferred from whether the current version matched
the most recent tag. However this method only works for the first
update. Using a flag simplifies this logic, and makes it possible to
manually re-run this for further updates to a release candidate.
Each changelog release now has category headers. The standard "keep a
changelog" [1] categories are used, along with the addition of
"Uncategorized" for any changes that have not yet been categorized.
The changelog script has been updated to add this "Uncategorized"
header if it isn't already present, and to place any new commits under
this header.
The changelog has been updated to property categorize each change in
recent releases, and to place changes in older releases under the
header "Uncategorized".
[1]: https://keepachangelog.com/en/1.0.0/
Each release header now includes a link to the range of commits
included with that release. These links are at the end of the document,
in accordance with the "keep a changelog" [1] format.
For the purpose of this changelog, the "previous release" is the most
recent release mentioned in the changelogs. The diffs ignore any
releases that were omitted from the changelog. This is mainly an issue
with older releases, so it seemed acceptable. All releases have been
documented for a couple of years now, and will be going forward as
well.
The name of the "Current Develop Branch" section was changed to
"Unreleased" to confirm with "keep a changelog".
The `auto-changelog.js` script has been updated to update/add these
links whenever adding a new release header as well.
[1]: https://keepachangelog.com/en/1.0.0/
The changelog release header format has been updated to match the "keep
a changelog" [1] format. Each header is now the bracketed version
number followed by a dash, then the release date in ISO-8601 format.
The release dates in each header were also updated to match the date of
the corresponding GitHub Release [2]. Many of these dates were
incorrect because they were set on the day we created the release
candidate, rather than on the day of release.
Any changelog release entries without a corresponding GitHub release
was left with the date already specified.
The three oldest release headers were missing dates. For the first two,
I used the date of the version bump commit. For the third, I removed it
since no changes were listed anyway, and it represented a range of
releases rather than a single one.
The `auto-changelog.js` script has been updated to account for this new
format as well.
[1]: https://keepachangelog.com/en/1.0.0/
[2]: https://github.com/MetaMask/metamask-extension/releases
The changelog update script now prevents duplicate entries from being
added. Specifically, it will ensure that if a PR has been referenced
already in an entry, it will not add it again.
This should prevent it from adding duplicate entries for changes that
were cherry-picked into hotfix releases.
Note that this duplication prevention only works for entries containing
a PR number. We don't have any way to prevent duplicate entries yet in
cases where we don't know the associated PR. We will be preventing this
possibility entirely pretty soon in some upcoming release automation
changes though, so I'm not concerned about this omission.
Instead of always placing new changelog entries under the "Current
Develop Branch" header, the changelog script now places them under the
header for the current release if that release has not yet been tagged.
This eliminates one manual step from the release process.
Relates to #10752
Our build script waits for the `close` event to determine whether the
task has exited. The `exit` event is a better representation of this,
because if a stream is shared between multiple processes, the process
may exit without the `close` event being emitted.
We aren't sharing streams between processes, so this edge case doesn't
apply to us. This just seemed like a more suitable event to listen to,
since we care about the process exiting not the stream ending.
See this description of the `close` event from the Node.js
documentation [1]:
>The `'close'` event is emitted when the stdio streams of a child
>process have been closed. This is distinct from the `'exit'` event,
>since multiple processes might share the same stdio streams.
And see this description of the `exit` event:
>The `'exit'` event is emitted after the child process ends.
[1]: https://nodejs.org/docs/latest-v14.x/api/child_process.html#child_process_event_exit
* build - declare background as html
* build - fill in empty file when a missing file is expected
* lint - fix
* Update development/build/manifest.js
Co-authored-by: Mark Stacey <markjstacey@gmail.com>
* Update development/build/manifest.js
Co-authored-by: Mark Stacey <markjstacey@gmail.com>
Co-authored-by: Mark Stacey <markjstacey@gmail.com>
* Excluding sourcemaps comment in production builds
FixesMetaMask/metamask-extension#7077
* Fix source map explorer script
The source map explorer script now re-adds the source map comment to
each file to ensure the source map visualization still works. Each
module with a sourcemap is copied to a temporary directory along with
the module it corresponds to, and from there it's passed into
`source-map-explorer`. This should ensure the resulting visualization
matches what it was before.
Everything has been moved inside of functions to generally improve
readability, and to allow the use of local variables.
Co-authored-by: Mark Stacey <markjstacey@gmail.com>
The source map explorer script will now use `yarn` instead of `npx` to
create the visualizations, to ensure that it's using the exact version
of `source-map-explorer` that we have in our dependencies.
The standard set of Bash flags have been set as well, and the standard
Bash shebang we use. This ensures the script will fail if an error is
encountered.
Build warnings related to Sass have been reduced by dynamically
importing `gulp-sass` and `sass-compiler` at the point where it's first
used. This ensures that the four Dart-related build warnings are only
emitted for the build process that is actually running Sass, rather
than by _every_ build process.
The bundle visualizations for the library bundles has been fixed.
Previously it was trying to generate a visualization for the non-
existent 'libs.js' module. Now it correctly generates a visualization
for the 'ui-libs.js` and 'bg-libs.js' modules.
The `.sh` file extension is now used for all Bash scripts. This ensures
the files are recognized as Bash scripts by the ShellCheck CI job, and
by editors/IDEs for improved syntax highlighting.
The `verify-locale-strings` script now ignores unit tests. This ensures
the use of a string literal in a unit test won't mistakenly make this
script believe that a message is used in the extension.
This came up recently in #10396, where the deletion of unit tests for
dead code triggered an unused message lint failure. This was then fixed
in #10395.
* ci - run storybook and add to build-artifacts
* ci/storybook - rename storybook build path and fix artifact upload
* ci/storybook - rename link text
* clean - remove accidently committed storybook build dir
* storybook - fix image path to relative (#10364)
The `verify-locale-strings.js` script now validates that the
descriptions from the `en` locale are also present in all other
locales.
These descriptions are intended to help with translation, and are not
meant to be translated. This check will ensure that translators don't
accidentally translate these. It also ensures they're present alongside
each translated message, which might be helpful for understanding
context.
The report on missing messages has been removed from the verify
locales script. This report was making the console output of this
command unreasonably long, and would obscure the reports on any invalid
entries.
A new script was written to report on missing localized messages.
This can be run with the command `yarn locale-coverage`. This will
print a report to the console on the coverage for each locale.
The environment variables `METAMETRICS_PROJECT_ID` and
`ETH_GAS_STATION_API_KEY` were still being injected into the JavaScript
build, despite being unused. The MetaMetrics project ID was made
obsolete in #9646, and the ETH Gas Station API key was made obsolete in
PR #9867
* Maintain console logging in dev mode
Co-authored-by: kumavis <aaron@kumavis.me>
Co-authored-by: Erik Marks <rekmarks@protonmail.com>
Co-authored-by: Mark Stacey <markjstacey@gmail.com>
The Firefox e2e tests now use the `.zip` file for testing the
extension. We've found this to produce more similar results to
production, compared to the old method of loading the unzipped
directory.
Passing in a `.zip` file to the Chrome driver didn't seem to work. I
didn't investigate this further to see if it was possible, but I'm not
sure it makes a difference on Chrome anyway.
When you load an extension `.zip` file in Firefox, it fails to load
scripts with the `.cjs` file extension. However, it works if you load
the extension via the `manifest.json` file instead.
After renaming the `lockdown.cjs` file to `lockdown.js`, it works in
Firefox in all cases, regardless whether it's loaded by manifest or by
`.zip`.
* Remove use of ethgassthat; use metaswap /gasPrices api for gas price estimates
* Remove references to ethgasstation
* Pass base to BigNumber constructor in fetchExternalBasicGasEstimates
* Update ui/app/hooks/useTokenTracker.js
Co-authored-by: Erik Marks <25517051+rekmarks@users.noreply.github.com>
* Delete gas price chart
* Remove price chart css import
* Delete additional fee chart code
* Lint fix
* Delete more code no longer used after ethgasstation removal
Co-authored-by: Erik Marks <25517051+rekmarks@users.noreply.github.com>
* Freezeglobals: remove Promise freezing, add lockdown
* background & UI: temp disable sentry
* add loose-envify, dedupe symbol-observable
* use loose envify
* add symbol-observable patch
* run freezeGlobals after sentry init
* use require instead of import
* add lockdown to contentscript
* add error code in message
* try increasing node env heap size to 2048
* change back circe CI option
* make freezeGlobals an exported function
* make freezeGlobals an exported function
* use freezeIntrinsics
* pass down env to child process
* fix unknown module
* fix tests
* change back to 2048
* fix import error
* attempt to fix memory error
* fix lint
* fix lint
* fix mem gain
* use lockdown in phishing detect
* fix lint
* move sentry init into freezeIntrinsics to run lockdown before other imports
* lint fix
* custom lockdown modules per context
* lint fix
* fix global test
* remove run in child process
* remove lavamoat-core, use ses, require lockdown directly
* revert childprocess
* patch package postinstall
* revert back child process
* add postinstall to ci
* revert node max space size to 1024
* put back loose-envify
* Disable sentry to see if e2e tetss pass
* use runLockdown, add as script in manifest
* remove global and require from runlockdown
* add more memory to tests
* upgrade resource class for prep-build & prep-build-test
* fix lint
* lint fix
* upgrade remote-redux-devtools
* skillfully re-add sentry
* lintfix
* fix lint
* put back beep
* remove envify, add loose-envify and patch-package in dev deps
* Replace patch with Yarn resolution (#9923)
Instead of patching `symbol-observable`, this ensures that all
versions of `symbol-observable` are resolved to the given range, even
if it contradicts the requested range.
Co-authored-by: Mark Stacey <markjstacey@gmail.com>
The `sentry:publish` script now exits with an exit code of `1` upon
failure, indicating that something went wrong. Previously it would exit
with a code of `0`, indicating to CI that everything worked correctly.
The script will now also exit early if the authentication check fails.
This mock Segment server can be used to test our extension metrics. It
will respond to all request with HTTP 200, and will print the requests
to the console. It also has parsing built-in for Segment request
payloads.
Right now only the event name is printed, but we can enhance this in
the future to print more event information. We can also enhance the
mock to be a more realistic representation of the API.
The extension has been modified to allow the Segment host to be
overwritten with the `SEGMENT_HOST` environment variable. This will
ensure that all Segment events are redirected to that host.
So for example, to create a dev build that uses this server, you could
set the `SEGMENT_WRITE_KEY` and `SEGMENT_LEGACY_WRITE_KEY` values to
any non-empty string, and set `SEGMENT_HOST` to
`http://localhost:9090`.
This was created originally to test PR #9768
It was getting rather complicated to keep track of which Segment keys
were set where, and under which name.
The build script now injects a key even in test environments, but it is
unused if `IN_TEST` is truthy. This should be functionally equivalent
to the old logic. I find this simpler mainly for two reasons: there is
one less intermediate variable to keep track of now, and the `IN_TEST`
check is now directly in the module where we're constructing the
`segment` instance, rather than being referenced at a distance in a
comment.
The old setup made it difficult to turn on metrics for specific e2e
tests as well, which will be done in a subsequent PR.
The `devMode` parameter being passed to the `buildScss` function was
not being used. The `buildScss` function was declared _inside_ the
function in which it is invoked, so the `devMode` variable is already
in scope - it doesn't need to be passed in.
The `styles:dev` step of the development build was broken in #9568 when
the `lockdown()` function from SES was introduced. One of the effects
of `lockdown()` is preventing the use of `RegExp.lastMatch`, which is
relied upon by `postcss` for parsing inline sourcemaps.
This problem has been worked around by re-arranging the build pipeline
for styles.
Firstly, the `autoprefixer` stage was moved _before_ sourcemaps were
generated. Its placement _after_ sourcemaps was a mistake in the first
place - it should have always been before they were written, so that
the sourcemaps could keep track of the changes made by `autoprefixer`.
Second, the `-rtl` sourcemap generation was moved to a separate build
pipeline. The `rtl` stage also uses `postcss`, and it must come after
the sourcemaps are written for the non-RTL styles, so splitting it into
a separate build was the only way to avoid passing in inline
sourcemaps. This does make the build slightly slower, but it also
decreases the size of the RTL sourcemaps dramatically.
* Add ses lockdown to build system using lavamoat-core
* use proper object.assign version
* disable lint rules for ses lockdown
* deps - update rtlcss
Co-authored-by: kumavis <aaron@kumavis.me>
Co-authored-by: Mark Stacey <markjstacey@gmail.com>
`@metamask/eslint-config` has been updated to v4.1.0. This update
requires that we update `eslint` to v7 as well, which in turn requires
updating most `eslint`-related packages.
Most notably, `babel-eslint` was replaced with `@babel/eslint-parser`,
and `babel-eslint-plugin` was replaced by `@babel/eslint-plugin`. This
required renaming all the `babel/*` rules to `@babel/*`.
Most new or updated rules that resulted in lint errors have been
temporarily disabled. They will be fixed and re-enabled in subsequent
PRs.
On Windows, spawn fails if the exact filename
of a binary isn't passed. e.g. `spawn('yarn')` fails
because the binary is named `yarn.cmd`.
Instead, we depend on `cross-spawn` which handles differences
in `spawn` across platforms.
* Delete localhost provider type
* Use ganache-cli default chain ID for tests
* Delete unused test firstTimeState variable
* Migrate default ganache-cli network to frequentRpcListDetail
* Add default test provider state
* Add test functionality to createJsonRpcClient
* Lint locales
* Update test middleware creation
* fixup! Update test middleware creation
* Fix require-unicode-regexp issues
See [`require-unicode-regexp`](https://eslint.org/docs/rules/require-unicode-regexp) for more information.
This change enables `require-unicode-regexp` and fixes the issues raised by the rule.
* Remove case-insensitive flag from regexps
All JavaScript files included in the final bundle are now listed as
target files. The `phishing-detect.js` file is the only new file to be
validated that was not validated before.
Any files that are expected to fail validation are commented out, with
a note explaining why they're expected to fail.
The report printed to the console for invalid source map samples has
been improved in a few ways:
* The entire message is now printed using `console.error`, so the
contents aren't split between STDERR and STDOUT
* The code fence is now guaranteed to be a set length, rather than it
varying depending on the filename
* The code fence is no longer padded on the inside with newlines, which
results in a more compact output that is (in my opinion) just as
readable.
Our source maps were being corrupted during minification, because the
`gulp-terser-js` plugin we were using didn't account for the existence
of sourcemaps in the input. A configuration option to allow the input
of sourcemaps was added in v5.2.0. The plugin has been updated, and we
now use this option.
Previously the generated sourcemaps had an invalid entry in the
"sources" array, with the filename of the bundle itself. This was not a
real source. After this change, this invalid source is no longer
present.
The Sentry DSN is now expected to be provided via environment variable
for production builds. The build script will fail if it is missing, and
an error will be thrown at runtime if it is missing.
The `SENTRY_DSN` environment variable has been set in CI to the old
value for `SENTRY_PROD_DSN`. We can migrate to a new DSN at some point
in the future.
The MetaMetrics project ID can now be set via environment variable. It
has not been set yet in practice, so for now the old project IDs will
still be used. This is in preparation for migrating to a new project.
The remaining integration tests are all covered by e2e tests, so
they're no longer needed.
All associated scripts, fixtures, and dependencies have also been
removed.
The `createStaticServer` function was split from the `static-server.js`
script, so that the static server could be constructed
programmatically. `static-server.js` remains responsible for the CLI.
This was done to make it easier to programmatically start the test dapp
from e2e tests.
The `static-server` script now exits with a code of `1` upon failure.
Previously it would print the error to the console but exit with a code
of `0`, indicating success.
We were including the polyfill for the `Intl.RelativeTimeFormat` API,
but we weren't including any locale data. This polyfill doesn't work
without the locale data for whichever locale you're formatting.
The data for all locales we support is now included. The locale data
is loaded from disk as-needed (during app startup, and upon each change
in locale).
* update connected accounts appearance
* consolidate account alerts
* UnconnectedAccountAlert: use ConnectedAccountsList
* move switch account action out of menu in all views
Co-authored-by: Mark Stacey <markjstacey@gmail.com>
A new page has been created for viewing assets. This replaces the old
`selectedToken` state, which previously would augment the home page
to show token-specific information.
The new asset page shows the standard token overview as seen previously
on the home page, plus a history filtered to show just transactions
relevant to that token.
The actions that were available in the old token list menu have been
moved to a "Token Options" menu that mirrors the "Account Options"
menu.
The `selectedTokenAddress` state has been removed, as it is no longer
being used for anything.
`getMetaMetricState` has been renamed to `getBackgroundMetaMetricState`
because its sole purpose is extracting data from the background state
to send metrics from the background. It's not really a selector, but
it was convenient for it to use the same selectors the UI uses to
extract background data, so I left it there for now.
A new Redux store has been added to track state related to browser history.
The most recent "overview" page (i.e. the home page or the asset page) is
currently being tracked, so that actions taken from the asset page can return
the user back to the asset page when the action has finished.
