wip
Documentation improvements for send slice support of EIP1559
Remove console.log in send duck
Property lookup safety improvement in selectors/confirm-transaction
Add code accidentally removed in rebase
Update addTxGasDefaults and _getDefaultGasFees to work with new estimate types, and ensure we correctly handle gas price estimates when on EIP1559 networks (#11615)
* Fix typo
Remove console.log in send duck
* Update addTxGasDefaults and _getDefaultGasFees to work correctly with all new gas fee estimate types
* Don't show gas timing support when not on eip1559 compatible network
* Hide gas timing component on transaction screen when on a non-1559 network
* Improve comments, tests and edge case handling
* Ensure eip1559 fees are applied and updated correctly when eip1559 estimate api fails
* Lint fix
Co-authored-by: Brad Decker <git@braddecker.dev>
Remove console.log
Handle possible gasEstimateType undefined
Remove unnecessary nonce field position change in confirm-page-container-content__details
* Add support for EIP1559 transactions to transaction breakdown
* Use userPreferencedCurrencyDisplay for effective gas price in transaction breakdown
* Hide eip1559 gas properties in transaction breakdown on non-1559 networks
* Add comment explaining gasPrice and effectiveGasPrice usage in transaction breakdown container.
* prepare for EIP1559 gas fields in speedup/cancel
* Update ui/components/app/gas-customization/gas-modal-page-container/gas-modal-page-container.container.js
* Swaps support for local testnet
* Create util method for comparison of token addresses/symbols to default swaps token
* Get chainId from txMeta in _trackSwapsMetrics of transaction controller
* Add comment to document purpose of getTransactionGroupRecipientAddressFilter
* Use isSwapsDefaultTokenSymbol in place of repeated defaultTokenSymbol comparisons in build-quote.js
If a `gasPrice` was specified in a transaction sent via a dapp, we
would include it in our `eth_estimateGas` call, causing it to fail if
the user had insufficient balance (for either the transaction amount or
the gas fee). This resulted in the fallback gas estimate being used;
the block gas limit. The block gas limit is quite a bit larger than
most transactions need, so this resulted in wildly inflated gas costs
being shown on our confirmation screen.
The `gasPrice` has been removed from the `txParams` object we pass to
`eth_estimateGas`, so now it won't perform any balance checks anymore.
This ensures that we'll get a valid gas estimate, as long as geth is
able to simulate the contract execution properly.
Fixes#9967
A few inconsistencies in JSDoc formatting have been fixed throughout
the project. Many issues remain; these were just the few things that
were easy to fix with a regular expression.
The changes include:
* Using lower-case for primitive types, but capitalizing non-primitive
types
* Separating the parameter identifier and the description with a dash
* Omitting a dash between the return type and the return description
* Ensuring the parameter type is first and the identifier is second (in
a few places it was backwards)
* Using square brackets to denote when a parameter is optional, rather
than putting "(optional)" in the parameter description
* Including a type and identifier with every parameter
* Fixing inconsistent spacing, except where it's used for alignment
* Remove incorrectly formatted `@deprecated` tags that reference non-
existent properties
* Remove lone comment block without accompanying function
Additionally, one parameter was renamed for clarity.
* create custom addHexPrefix function
* switch to custom addHexPrefix
Co-authored-by: Mark Stacey <markjstacey@gmail.com>
Co-authored-by: Erik Marks <rekmarks@protonmail.com>
Consolidates the background and UI segment implementations into a shared solution.
This results in the introduction of our first shared module.
Co-authored-by: Erik Marks <25517051+rekmarks@users.noreply.github.com>
* Add data point to 'Swaps Completed' segment event: estimated vs used gas
* Linted
* Correct property name for estimated gas on swapMetaData in _trackSwapsMetrics()
* Set estimated_gas property on swapMetaData to a hex string
* Correct base when dividing by estimated_gas
Co-authored-by: Dan Finlay <dan@danfinlay.com>
* Update txMeta after postTxBalance has been retrieved
* Use gas used from txReceipt to calculate eth received
* Return null from getSwapsTokensReceivedFromTxMeta in tokenSymbol is ETH and txReceipt is missing
* Get latest txMeta before updating it with postTxBalance in case of a swaps tx in confirmTransaction
* Lint fix
* Use initial transaction for settings swap transaction title params, and remove addition of swap properties to cancel transcations
* Update unit test data
* Use token symbol properties from initial transaction for filitering in transaction list
* call this.txStateManager.setTxStatusConfirmed before async call in confirmTransaction in the transactions controller
* Clone txMeta before setTxStatusConfirmed in confirmTransaction
* Correctly updateTx in confirmTransaction
* Track swaps event only if it is a swap transaction
* Create wrapper function for segment events
* Extract transaction controller metrics calls into own function
Co-authored-by: Mark Stacey <markjstacey@gmail.com>
It seems that this blocklist checker never worked correctly. Ever since
the initial commit, it was comparing the Number `1` to the `networkId`,
which is a string. Additionally, even if it did throw, the transaction
continued unhindered. The user could still approve it, and there was no
indication shown to the user that anything went wrong. Also some of the
blocklist entries were incorrectly mixed-case, and were never hit.
We can remove this for now, and re-add it later on after we rewrite the
transaction controller.
* Use over the whole stringified error object which doesn't show the actual error message that is set as the
Co-authored-by: Mark Stacey <markjstacey@gmail.com>
* Feedback commit
The code for checking whether a transaction was dropped or not was
refactored in #8398, but in the process an off-by-one error was
introduced.
The old version of `_checkIfTxWasDropped` would query for an updated
transaction count from the network, and would consider the pending
transaction to be dropped if the count was above the nonce. However,
the version introduced in #8398 considers the transaction to be dropped
if the count is above *or equal to* the nonce.
The pending transaction nonce is expected to be equal to the
transaction count, because the nonce starts at zero. The transaction
count is equal to the expected next nonce.
The variable name has been updated to make this more clear
(`networkNextNonce` is how the `nonce-tracker` refers to this value).
`parseInt` is now called with an explicit radix of `16` as well, to
ensure both nonce strings are always parsed as hex. In all cases I am
aware of, these nonce strings were prefixed by `0x`, meaning that
`parseInt` would default to a radix of `16`, so this likely doesn't
constitute a functional change.
Fixes#8688
All transaction status updates were moved into a `setTimeout` callback
and wrapped in a `try...catch` block in #4131, apparently in an attempt
to prevent failures in event subscribers from interrupting the
transaction logic. The `try...catch` block did accomplish that, but by
putting the status update in a `setTimeout` callback the operation was
made asynchronous.
Transaction status updates now happen unpredictably, in some future
event loop from when they're triggered. This creates a race condition,
where the transaction status update may occur before or after
subsequent state changes. This also introduces a risk of accidentally
undoing a change to the transaction state, as the update made to the
transaction inside the `setTimeout` callback uses a reference to
`txMeta` obtained synchronously before the `setTimeout` call. Any
replacement of the `txMeta` between the `setTxStatus` call and the
execution of the timeout would be erased. Luckily the `txMeta` object
is more often than not mutated rather than replaced, which may explain
why we haven't seen this happen yet.
Everything seems to work correctly with the `setTimeout` call removed,
and now the transaction logic is easier to understand.
A race condition exists where after adding an unapproved transaction,
it could be mutated and then replaced when the default gas parameters
are set. This happens because the transaction is added to state and
broadcast before the default gas parameters are set, because
calculating the default gas parameters to use takes some time.
Once they've been calculated, the false assumption was made that the
transaction hadn't changed.
The method responsible for setting the default gas now retrieves an
up-to-date copy of `txMeta`, and conditionally sets the defaults only
if they haven't yet been set.
This race condition was introduced in #2962, though that PR also added
a loading screen that avoided this issue by preventing the user from
interacting with the transaction until after the gas had been
estimated. Unfortunately this loading screen was not carried forward to
the new UI.
* Remove `estimatedGas` property from `txMeta`
The `estimatedGas` property was a cache of the gas value estimated for
a transaction when the default gas limit was set. This property wasn't
used anywhere. It may have been useful for debugging purposes, but the
same gas estimate is already stored on the `history` property so it
should be present in state logs regardless.
* Remove `gasLimitSpecified` txMeta property
The `gasLimitSpecified` property of `txMeta` wasn't used for anything.
It might have been useful for debugging purposes, but whether or not
the gas limit was specified can also be determined from looking at the
transaction history, so it's not a huge loss.
* Remove `gasPriceSpecified` txMeta property
The `gasPriceSpecified` property of `txMeta` wasn't used for anything.
It might have been useful for debugging purposes, but whether or not
the gas price was specified can also be determined from looking at the
transaction history, so it's not a huge loss.
* Remove `simpleSend` txMeta property
The `simpleSend` property of `txMeta` was used to ensure a buffer was
not added to the gas limit during gas estimation for simple send
transactions. It was made redundant by #8484, which accomplishes this
without the use of this property.
Previously a transaction would get assigned a default value during the
`addTxGasDefaults` function, after the transaction was added and sent
to the UI.
Instead the transaction is assigned a default value before it gets
added. This flow is simpler to follow, and it avoids the race condition
where the transaction is assigned a value from the UI before this
default is set. In that situation, the UI-assigned value would be
overridden, which is obviously not desired.
`analyzeGasUsage` now returns the results of the analysis rather than
setting them directly on `txMeta`. The caller is now responsible for
mutating `txMeta` instead. Functionally this should be identical to
before.
The simple send gas estimation has been moved out of the gas estimation
module, and into the transaction controller. This was done in an effort
to limit the number of places where `txMeta` is mutated while the
default gas parameters are being set.
