This reverts commit f5265c24ab.
Apparently it wasn't unnecessary after all. The Lock page served a few
different purposes. First, it was used to safeguard the seed phrase, in
case the user was interrupted after setting a password. Otherwise
anyone could open MetaMask and see the seed phrase without verifying
the password. Second, the submit function for the initialization unlock
screen also returned the seed phrase, so that it could be set in React
state for the confirmation step. Third, the submit function was also
responsible for navigating back to the seed phrase reveal page.
Removing the lock page had the effect of causing an infinite render
loop if onboarding was interrupted in the "Create" flow after setting
a password but before seed phrase confirmation. That redirect loop has
now been fixed.
* create custom addHexPrefix function
* switch to custom addHexPrefix
Co-authored-by: Mark Stacey <markjstacey@gmail.com>
Co-authored-by: Erik Marks <rekmarks@protonmail.com>
* Log web3 usage for functions and nested properties only
* Change web3 metrics source to legacy
* Update web3 metrics properties and event name
Co-authored-by: Mark Stacey <markjstacey@gmail.com>
A lint error was accidentally introduced recently when two PRs changed
the same area of code (#9793 and #9795). They didn't conflict, and the
lint passed for both, but when combined they left an unused variable.
This page appears to serve the sole purpose of locking the extension
and redirecting back to the base route if the page is refreshed during
the onboarding flow. This ineffectual before the vault has been
initialized, and it's a barrier to resuming interrupted onboarding
flows when done after initialization.
This prop was being passed to the `CreatePassword` component, but that
component has no prop with this name. In fact, no component in this
entire project does.
Adds swaps-gas-customization-modal and utilize in swaps
Remove swaps specific code from gas-modal-page-container/
Remove slow estimate data from swaps-gas-customization-modal.container
Use average as lower safe price limit in swaps-gas-customization-modal
Lint fix
Fix up unit tests
Update ui/app/ducks/swaps/swaps.js
Co-authored-by: Mark Stacey <markjstacey@gmail.com>
Remove stale properties from gas-modal-page-container.component.js
Replace use of isCustomPrice safe with isCustomSwapsGasPriceSafe, in swaps-gas-customization-modal
Remove use of averageIsSafe in isCustomPriceSafe function
Stop calling resetCustomGasState in swaps
Refactor 'setter' type actions and creators to 'event based', for swaps slice custom gas logic
Replace use of advanced-tab-content.component with advanceGasInputs in swaps gas customization component
Add validation for the gasPrices endpoint
swaps custom gas price should be considered safe if >= to average
Update renderDataSummary unit test
Lint fix
Remove customOnHideOpts for swapsGasCustomizationModal in modal.js
Better handling for swaps gas price loading and failure states
Improve semantics: isCustomSwapsGasPriceSafe renamed to isCustomSwapsGasPriceUnSafe
Mutate state directly in swaps gas slice reducer
Remove unused params
More reliable tracking of speed setting for Gas Fees Changed metrics event
Lint fix
Throw error when fetchSwapsGasPrices response is invalid
add disableSave and customTotalSupplement to swaps-gas-customization container return
Update ui/app/ducks/swaps/swaps.js
Co-authored-by: Mark Stacey <markjstacey@gmail.com>
Improve error handling in fetchMetaSwapsGasPriceEstimates
Remove metricsEvent from swaps-gas-customization-modal context
Base check of gas speed type in swaps-gas-customization-modal on gasEstimateType
Improve naming of variable and functions use to set customPriceIsSafe prop of AdvancedGasInputs in swaps-gas-customization-modal
Simplify sinon spy/stub code in gas-price-button-group-component.test.js
Remove unnecessary getSwapsFallbackGasPrice call in swaps-gas-customization-modal
Remove use of getSwapsTradeTxParams and clean up related gas price logic in swaps
Improve validator of SWAP_GAS_PRICE_VALIDATOR
Ensure default tradeValue
* Display network form chain ID in decimal
* Hide chainId tooltip in view mode
* Display chain ID error message in entered format
* Update locale messages
* Rename on change chain ID validator
Some of the unit tests for the incoming transaction controller included
a 1 second wait. The wait was to ensure that a state update did not
occur, as it happens asynchronously.
The tests work equally well using a `setTimeout` with a zero second
wait, because the asynchronous block update is guaranteed to have been
queued up by the time this timeout function is called. The timeout has
been reduced to `0` to speed up the tests.
Additionally, `undefined` has been added to the list of network names
used to construct the fake API responses. This is to ensure that the
API returns a valid response, so that the test fails when it should.
It was getting rather complicated to keep track of which Segment keys
were set where, and under which name.
The build script now injects a key even in test environments, but it is
unused if `IN_TEST` is truthy. This should be functionally equivalent
to the old logic. I find this simpler mainly for two reasons: there is
one less intermediate variable to keep track of now, and the `IN_TEST`
check is now directly in the module where we're constructing the
`segment` instance, rather than being referenced at a distance in a
comment.
The old setup made it difficult to turn on metrics for specific e2e
tests as well, which will be done in a subsequent PR.
There were a few lint errors introduced in #9768 due to the recently
merged prettier PR. They have now been fixed.
Additionally, one line using the property `eth_accounts` was
intermittently failing for me locally. I've been seeing this lint
failure off-and-on for a few days now - I'm not sure why I haven't seen
it on CI. Either way though, it's now ignored.
The incoming transactions controller now uses the `chainId` for the
current network instead of the `networkId`. This ensures that custom
RPC endpoints for the built-in supported networks do correctly receive
incoming transactions.
As part of this change, the incoming transactions controller will also
cease keeping track of the "last block fetched" for networks that are
not supported. This piece of state never really represented the last
block fetched, as _no_ blocks were fetched for any such networks. It
been removed.
Unit tests have been added to the incoming transactions controller to
ensure that block updates are correctly resulting in state updates when
incoming transactions are enabled. All other events that trigger state
updates are tested as well.
The tests were written to be minimally dependent upon implementation
details of the controller itself. `nock` was used to mock the API
response from Etherscan. Each event is triggered asynchronously by
`sinon`, as in production they are likely only triggered
asynchronously.
This was extracted from #9583
This PR includes a new `wait-until-called` module meant to help with
writing asynchronous tests. It allows you to wait until a stub has been
called.
* Standardize appearance of network settings
* Add separate route for network settings form
* Control network form rendering in popup via route
* Hide network form buttons when form is viewOnly
* Handle extremely long network names
If the swaps state is cleared in between the initial quote fetch and
the subsequent poll fetch, a `TypeError` will be thrown due to
`fetchParams` being set to `null`.
This is of no functional consequence, as `fetchParams` _should_ be
`null` in this case, and and no further action should be taken.
The optional chaining operator is now used to ensure the call no longer
throws.
The shared mocks used previously in the incoming transaction controller
tests have been replaced with functions that can generate a new mock
for each test.
We should avoid ever sharing mocks between tests. It's quite easy for
a mock to get accidentally mutated or not correctly "reset" for the
next test, leading to test inter-dependencies and misleading results.
In particular, it is unsafe to share a `sinon` fake (e.g. a spy or
stub) because they can't be fully reset between tests. Or at least it's
difficult to reset them property, and it can't be done while also
following their recommendations for preventing memory leaks.
The spy API and all related state can be reset with `resetHistory`,
which can be called between each test. However `sinon` also recommends
calling `restore` after each test, and this will cause `sinon` to drop
its internal reference to the fake object, meaning any subsequent call
to `resetHistory` would fail. This is intentional, as it's required to
prevent memory from building up during the test run, but it also means
that sharing `sinon` fakes is particularly difficult to do safely.
Instead we should never share mocks in the first place, which has other
benefits anyway.
This was discovered while writing tests for #9583. I mistakenly
believed that `sinon.restore()` would reset the spy state, and this was
responsible for many hours of debugging test failures.
