If the attempt to fetch quotes fails, an error message is now logged to
the console explaining why it failed. This makes it dramatically easier
to understand what's happening when quotes fail.
At some point later on we should also look specifically for errors we
expect to occur, and report to Sentry in unexpected cases. I've added a
TODO comment about this.
* Add data point to 'Swaps Completed' segment event: estimated vs used gas
* Linted
* Correct property name for estimated gas on swapMetaData in _trackSwapsMetrics()
* Set estimated_gas property on swapMetaData to a hex string
* Correct base when dividing by estimated_gas
Co-authored-by: Dan Finlay <dan@danfinlay.com>
* Add useSwapsEthToken hook and utilize wherever we need the ETH 'token' for swaps
* Remove rawEthTokens param from useTokensToSearch calls
Co-authored-by: Mark Stacey <markjstacey@gmail.com>
Co-authored-by: Erik Marks <rekmarks@protonmail.com>
* Stop passing a gas param to the estimateGas call initiated in the swaps controller timedoutGasReturn
* Stop passing gas params to timedoutGasReturn
* Lint fix
* Stop passing no longer used param to setInitialGasEstimate
* Remove network config store
* Remove inline networks variable in network controller
* Re-key network controller 'rpcTarget' to 'rpcUrl'
* Require chainId in lookupNetwork, implement eth_chainId
* Require chain ID in network form
* Add alert, migrations, and tests
* Add chainId validation to addToFrequentRpcList
* Update public config state selector to match new network controller
state
* Use network enums in networks-tab.constants
* Ensure chainId in provider config is current
* Update tests
* Clear Account Details in AppState
We store sensitive information in the AppState under accountDetail for when the modal is active and present. This adds a new action/reducer and componentWillUnmount to clean up the persisted data left after leaving the modal.
* Remove reduntant clearAccountDetails call when clicking done button
* Fix require-unicode-regexp issues
See [`require-unicode-regexp`](https://eslint.org/docs/rules/require-unicode-regexp) for more information.
This change enables `require-unicode-regexp` and fixes the issues raised by the rule.
* Remove case-insensitive flag from regexps
* update connected accounts appearance
* consolidate account alerts
* UnconnectedAccountAlert: use ConnectedAccountsList
* move switch account action out of menu in all views
Co-authored-by: Mark Stacey <markjstacey@gmail.com>
A new page has been created for viewing assets. This replaces the old
`selectedToken` state, which previously would augment the home page
to show token-specific information.
The new asset page shows the standard token overview as seen previously
on the home page, plus a history filtered to show just transactions
relevant to that token.
The actions that were available in the old token list menu have been
moved to a "Token Options" menu that mirrors the "Account Options"
menu.
The `selectedTokenAddress` state has been removed, as it is no longer
being used for anything.
`getMetaMetricState` has been renamed to `getBackgroundMetaMetricState`
because its sole purpose is extracting data from the background state
to send metrics from the background. It's not really a selector, but
it was convenient for it to use the same selectors the UI uses to
extract background data, so I left it there for now.
A new Redux store has been added to track state related to browser history.
The most recent "overview" page (i.e. the home page or the asset page) is
currently being tracked, so that actions taken from the asset page can return
the user back to the asset page when the action has finished.
Defaults have been added for all three preferences. The default values
added are both falsey, so this shouldn't result in any functional
change. This was done to help make this preferences more easily
discoverable.
Add alert suggesting that the user switch to a connected account. This
alert is displayed when the popup is opened over an active tab that is
connected to some account, but not the current selected account. The
user can choose to switch to a connected account, or dismiss the alert.
This alert is only shown once per account switch. So if the user
repeatedly opens the popup on a dapp without switching accounts, it'll
only be shown the first time. The alert also won't be shown if the user
has just dismissed an "Unconnected account" alert on this same dapp
and account, as that would be redundant.
The alert has a "Don't show me this again" checkbox that allows the
user to disable the alert. It can be re-enabled again on the Alerts
settings page.
When disabling an alert, the background `alertEnabledness` state of the
alert was being set to `undefined` instead of `false`. This didn't have
any user-facing effect, since `undefined` is falsey, but it did result
in a PropType error on the Alert settings page. This mistake was made
in #8550.
The `alertEnabledness` state is now correctly set to `false` instead of
`undefined`.
The unconnected account alert can now be disabled. A "don't show this
again" checkbox has been added to the alert, which prevents that alert
from being shown in the future.
An alert settings page has been added to the settings as well. This
page allows the user to disable or enable any alert.
* Remove `estimatedGas` property from `txMeta`
The `estimatedGas` property was a cache of the gas value estimated for
a transaction when the default gas limit was set. This property wasn't
used anywhere. It may have been useful for debugging purposes, but the
same gas estimate is already stored on the `history` property so it
should be present in state logs regardless.
* Remove `gasLimitSpecified` txMeta property
The `gasLimitSpecified` property of `txMeta` wasn't used for anything.
It might have been useful for debugging purposes, but whether or not
the gas limit was specified can also be determined from looking at the
transaction history, so it's not a huge loss.
* Remove `gasPriceSpecified` txMeta property
The `gasPriceSpecified` property of `txMeta` wasn't used for anything.
It might have been useful for debugging purposes, but whether or not
the gas price was specified can also be determined from looking at the
transaction history, so it's not a huge loss.
* Remove `simpleSend` txMeta property
The `simpleSend` property of `txMeta` was used to ensure a buffer was
not added to the gas limit during gas estimation for simple send
transactions. It was made redundant by #8484, which accomplishes this
without the use of this property.
An alert is now shown when the user switches from an account that is
connected to the active tab to an account that is not connected. The
alert prompts the user to dismiss the alert or connect the account
they're switching to.
The "loading" state is handled by disabling the buttons, and the error
state is handled by displaying a generic error message and disabling
the connect button.
The new reducer for this alert has been created with `createSlice` from
the Redux Toolkit. This utility is recommended by the Redux team, and
represents a new style of writing reducers that I hope we will use more
in the future (or at least something similar). `createSlice` constructs
a reducer, actions, and action creators automatically. The reducer is
constructed using their `createReducer` helper, which uses Immer to
allow directly mutating the state in the reducer but exposing these
changes as immutable.
The `transForward` app state is no longer used, so it has been removed.
Associated actions have been removed as well.
This state dates back a few years, so I was unable to determine when it
was made obsolete.
This state hasn't been used since #5886. The nonce we display in our UI
is now from the background, rather than queried directly from the
front-end.
This also means we save making this network call each time a pending
transaction is added, and each time the transaction list is mounted.
Previously all browser globals were allowed to be used anywhere by
ESLint because we had set the `env` property to `browser` in the ESLint
config. This has made it easy to accidentally use browser globals
(e.g. #8338), so it has been removed. Instead we now have a short list
of allowed globals.
All browser globals are now accessed as properties on `window`.
Unfortunately this change resulted in a few different confusing unit
test errors, as some of our unit tests setup assumed that a particular
global would be used via `window` or `global`. In particular,
`window.fetch` didn't work correctly because it wasn't patched by the
AbortController polyfill (only `global.fetch` was being patched).
The `jsdom-global` package we were using complicated matters by setting
all of the JSDOM `window` properties directly on `global`, overwriting
the `AbortController` for example.
The `helpers.js` test setup module has been simplified somewhat by
removing `jsdom-global` and constructing the JSDOM instance manually.
The JSDOM window is set on `window`, and a few properties are set on
`global` as well as needed by various dependencies. `node-fetch` and
the AbortController polyfill/patch now work as expected as well,
though `fetch` is only available on `window` now.
The "global" action constants (the ones previously in `actions.js`)
have been moved to a separate module. This was necessary to avoid a
circular dependency in an upcoming change that was causing problems.
In general the "ducks" pattern of organizing Redux stores does result
in circular dependency problems. This is because reuse of actions
between reducers is encouraged, so it's not uncommon for two reducers
to want to reference an action from the other. Going forward we can
avoid this problem by moving action constants that are shared between
reducers into this shared module.
This action was never triggered in practice, as MetaMask is never
unlocked from the UI. The unlock always occurs as a result of a
background state update.
