* E2e test for advanced settings: show conversion on test networks
* Lint fix
* Complete testnet conversion for all testnets
* Lint fixes
* Add custom error messages for each assert
* Removed delays
* Fix testcase
* Test only local network
* Mock API response for ETH USD price rate
* Remove unnecessary awaits
* Lint fix
* FindElement by its text on secondary currency
* Add missing awat for getText
An improper deploy key was used to deploy the TypeScript
migration dashboard. A new key has been created on the GitHub side for
the `metamask-extension-ts-migration-dashboard` repo and also added to
CircleCI. The new fingerprint for this key is provided in this commit.
This should hopefully make it possible for us to deploy to this repo
from CircleCI.
When the TypeScript migration dashboard is updated, it is built and
deployed in another repo, which is then deployed via GitHub Pages. To
push to this repo we have to set a Git username and email. This is
missing from the CircleCI config, so this commit uses the metamaskbot
GitHub account to do that.
* Convert ConfirmEncryptionPublicKey story to controls
* Updating fromAccount as per suggestion
Co-authored-by: georgewrmarshall <george.marshall@consensys.net>
* ConfirmPage: setApproveForAll use danger-primary
* ConfirmPageContainer: add setApprovalForAll dialog
- https://consensys.slack.com/archives/GTQAGKY5V/p1660061693528129
- temp UI to add protections for user until new redesign is implemented
* ConfirmPageContainer: use px instead of rem
Co-authored-by: George Marshall <george.marshall@consensys.net>
* ConfirmPageContainer: update SetApprovalForAll msg
Co-authored-by: George Marshall <george.marshall@consensys.net>
* addding the legacy tokenlist, tuning token detection OFF by default, adding new message while importing tokens
updating the controller version and calling detectNewToken on network change
fixing rebase error
Run yarn lavamoat:auto for updating policies
updating lavamoat
Deleted node modules and run again lavamoat auto
fixing rebase issues
updating lavamoat policies
updating lavamoat after rebasing
policies
updating custom token warning and blocking detectedtoken link when tpken detection is off for supported networks
to update the token in fetchTosync
updating the contract map object
Revert build-system lavamoat policy changes
Move token list selection logic from components to getTokenList selector
updating the tokenList
Update lavamoat
Fix error
updating lavamoat
lint fix
fix unit test fail
fix unit test fail
lint fix
fixing rebase locale error
rebase fix
Revert build-system policy changes
temp
addressing review comments
* rebase fix
As we convert parts of the codebase to TypeScript, we will want a way to
track progress. This commit adds a dashboard which displays all of the
files that we wish to convert to TypeScript and which files we've
already converted.
The list of all possible files to convert is predetermined by walking
the dependency graph of each entrypoint the build system uses to compile
the extension (the files that the entrypoint imports, the files that the
imports import, etc). The list should not need to be regenerated, but
you can do it by running:
yarn ts-migration:enumerate
The dashboard is implemented as a separate React app. The CircleCI
configuration has been updated so that when a new commit is pushed, the
React app is built and stored in the CircleCI artifacts. When a PR is
merged, the built files will be pushed to a separate repo whose sole
purpose is to serve the dashboard via GitHub Pages (this is the same
way that the Storybook works). All of the app code and script to build
the app are self-contained under
`development/ts-migration-dashboard`. To build this app yourself, you
can run:
yarn ts-migration:dashboard:build
or if you want to build automatically as you change files, run:
yarn ts-migration:dashboard:watch
Then open the following file in your browser (there is no server
component):
development/ts-migration-dashboard/build/index.html
Finally, although you shouldn't have to do this, to manually deploy the
dashboard once built, you can run:
git remote add ts-migration-dashboard git@github.com:MetaMask/metamask-extension-ts-migration-dashboard.git
yarn ts-migration:dashboard:deploy
* Backup user data
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
Tests for prependZero (utils.js)
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
Fix advancedtab test
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
backup controller tests
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
Lint fixes
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
Backup controller don't have a store.
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
Restore from file.
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
Advanced Tab tests
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
Lint fix
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
e2e tests for backup
unit tests for restore.
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
Fix comments on PR.
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
restore style
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
Lint fixes
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
We should move the exportAsFile to a utility file in the shared/ directory
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
Move export as file to shared folder
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
Refactor create download folder methods
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
Lint fixes.
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
Move the backup/restore buttons closer to 3box
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
Change descriptions
Add to search
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
refactor code to use if instead of &&
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
Lint fixes
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
Restore button should change cursor to pointer.
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
Fix restore not uploading same file twice.
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
Do not backup these items in preferences
identities
lostIdentities
selectedAddress
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
lint fixes.
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
* Only update what is needed.
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
* Fixed test for search
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
* remove txError as it currently does nothing.
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
* Remove dispatch, not needed since we're not dispatching any actions.
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
* Event should be title case.
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
* Make backup/restore normal async functions
rename event as per product suggestion.
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
* Use success Actionable message for success message and danger for error
message
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
* change event name to match with backup
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
* Lint fixes
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
* lint fixes
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
* fix e2e
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
* Convert Menu Bar test to tlr
* Add test ids to sig req footer buttons
* Convert Sig Req to tlr
* Convert First Time Flow Switch to tlr
* Convert Lock test to tlr
* Add test id to account options menu
There is a SES bug that results in errors being printed to the console
as `{}`[1]. The known workaround is to print the error stack rather
than printing the error directly. This affects our build script when it
is run with LavaMoat.
We used this workaround in one place in the build script already, but
not in the handler for task errors. We now use it in both places.
The workaround has been moved to a function that we can use throughout
the build script.
[1]: https://github.com/endojs/endo/issues/944
Two comments have been added to reference a longer explanation of what
the legacy provider streams are, why we still have them, and why we
want to remove them.
We use the `rc` package to read the `.metamaskrc` configuration file,
which is in "ini" format. This package has been replaced by the `ini`
package.
The `rc` package was not actively maintained, and it has had recent
security vulnerabilities. But most importantly, the config object
returned by `rc` includes a bunch of extra information that made build
script validation [1] difficult to implement. Specifically, it made it
challenging to ensure no extra environment variables were present.
The `ini` package on the other hand is simple, well maintained, and
is simpler to use. This package doesn't add any extra properties to the
object it returns, making validation easy.
[1]: https://github.com/MetaMask/metamask-extension/issues/15003
* Prevent confirm screen from showing method name from contract registry for txes created within MetaMask
* Ensure method name does not get sent in state when sending to a contract, with tx data, from metamask send screen
* Prevent confirm screen from showing method name from contract registry for txes created within MetaMask
* Ensure method name does not get sent in state when sending to a contract, with tx data, from metamask send screen
The "scripts" portion of the build script has been refactored to pass
the "build target" throughout the file. The "build target" is the
target environment for the build, reflected by the command used to
start the build (e.g. "dev", "prod", "test", or "testDev").
Beforehand we derived the variables `devMode` and `testing` from this
build target, and passed these throughout the script. However, there is
a future change [1] that requires adding a new build target that acts
like "prod" in some ways but not others. It was easier to refactor to
pass through `buildTarget` directly than it was to add a _third_
boolean flag to indirectly represent the target.
The existence of the "testDev" target made it convenient to still have
the `testing` and `devMode` flag, so helper functions were added to
derive those values from the build target. I anticipate that these will
only be needed temporarily though. We will probably be able to get rid
of the `testDev` target and the related complexities when we start
adding more flags (like `--watch`[2] and `--minify`[3]) to the build
script directly.
[1]: https://github.com/MetaMask/metamask-extension/issues/15003
[2]: https://github.com/MetaMask/metamask-extension/issues/12767
[3]: https://github.com/MetaMask/metamask-extension/issues/12768
* Stop throwing an error when adding gas defaults for a simple send, that has data, to an address without a response code
* Lint fix
* fixup lint
Co-authored-by: brad-decker <bhdecker84@gmail.com>
