import { createAsyncThunk, createSlice } from '@reduxjs/toolkit'; import abi from 'human-standard-token-abi'; import contractMap from '@metamask/contract-metadata'; import BigNumber from 'bignumber.js'; import { addHexPrefix, toChecksumAddress } from 'ethereumjs-util'; import { debounce } from 'lodash'; import { conversionGreaterThan, conversionUtil, multiplyCurrencies, subtractCurrencies, } from '../../../shared/modules/conversion.utils'; import { GAS_ESTIMATE_TYPES, GAS_LIMITS } from '../../../shared/constants/gas'; import { CONTRACT_ADDRESS_ERROR, INSUFFICIENT_FUNDS_ERROR, INSUFFICIENT_TOKENS_ERROR, INVALID_RECIPIENT_ADDRESS_ERROR, INVALID_RECIPIENT_ADDRESS_NOT_ETH_NETWORK_ERROR, KNOWN_RECIPIENT_ADDRESS_WARNING, MIN_GAS_LIMIT_HEX, NEGATIVE_ETH_ERROR, } from '../../pages/send/send.constants'; import { addGasBuffer, calcGasTotal, generateTokenTransferData, isBalanceSufficient, isTokenBalanceSufficient, } from '../../pages/send/send.utils'; import { getAddressBookEntry, getAdvancedInlineGasShown, getCurrentChainId, getGasPriceInHexWei, getIsMainnet, getSelectedAddress, getTargetAccount, getIsNonStandardEthChain, } from '../../selectors'; import { disconnectGasFeeEstimatePoller, displayWarning, estimateGas, getGasFeeEstimatesAndStartPolling, hideLoadingIndication, showConfTxPage, showLoadingIndication, updateTokenType, updateTransaction, } from '../../store/actions'; import { setCustomGasLimit } from '../gas/gas.duck'; import { QR_CODE_DETECTED, SELECTED_ACCOUNT_CHANGED, ACCOUNT_CHANGED, ADDRESS_BOOK_UPDATED, GAS_FEE_ESTIMATES_UPDATED, } from '../../store/actionConstants'; import { calcTokenAmount, getTokenAddressParam, getTokenValueParam, } from '../../helpers/utils/token-util'; import { checkExistingAddresses, isDefaultMetaMaskChain, isOriginContractAddress, isValidDomainName, } from '../../helpers/utils/util'; import { getGasEstimateType, getTokens, getUnapprovedTxs, isEIP1559Network, } from '../metamask/metamask'; import { resetEnsResolution } from '../ens'; import { isBurnAddress, isValidHexAddress, } from '../../../shared/modules/hexstring-utils'; import { CHAIN_ID_TO_GAS_LIMIT_BUFFER_MAP } from '../../../shared/constants/network'; import { ETH, GWEI } from '../../helpers/constants/common'; import { TRANSACTION_ENVELOPE_TYPES } from '../../../shared/constants/transaction'; // typedefs /** * @typedef {import('@reduxjs/toolkit').PayloadAction} PayloadAction */ const name = 'send'; /** * The Stages that the send slice can be in * 1. INACTIVE - The send state is idle, and hasn't yet fetched required * data for gasPrice and gasLimit estimations, etc. * 2. ADD_RECIPIENT - The user is selecting which address to send an asset to * 3. DRAFT - The send form is shown for a transaction yet to be sent to the * Transaction Controller. * 4. EDIT - The send form is shown for a transaction already submitted to the * Transaction Controller but not yet confirmed. This happens when a * confirmation is shown for a transaction and the 'edit' button in the header * is clicked. */ export const SEND_STAGES = { INACTIVE: 'INACTIVE', ADD_RECIPIENT: 'ADD_RECIPIENT', DRAFT: 'DRAFT', EDIT: 'EDIT', }; /** * The status that the send slice can be in is either * 1. VALID - the transaction is valid and can be submitted * 2. INVALID - the transaction is invalid and cannot be submitted * * A number of cases would result in an invalid form * 1. The recipient is not yet defined * 2. The amount + gasTotal is greater than the user's balance when sending * native currency * 3. The gasTotal is greater than the user's *native* balance * 4. The amount of sent asset is greater than the user's *asset* balance * 5. Gas price estimates failed to load entirely * 6. The gasLimit is less than 21000 (0x5208) */ export const SEND_STATUSES = { VALID: 'VALID', INVALID: 'INVALID', }; /** * Controls what is displayed in the send-gas-row component. * 1. BASIC - Shows the basic estimate slow/avg/fast buttons when on mainnet * and the metaswaps API request is successful. * 2. INLINE - Shows inline gasLimit/gasPrice fields when on any other network * or metaswaps API fails and we use eth_gasPrice * 3. CUSTOM - Shows GasFeeDisplay component that is a read only display of the * values the user has set in the advanced gas modal (stored in the gas duck * under the customData key). */ export const GAS_INPUT_MODES = { BASIC: 'BASIC', INLINE: 'INLINE', CUSTOM: 'CUSTOM', }; /** * The types of assets that a user can send * 1. NATIVE - The native asset for the current network, such as ETH * 2. TOKEN - An ERC20 token. */ export const ASSET_TYPES = { NATIVE: 'NATIVE', TOKEN: 'TOKEN', }; /** * The modes that the amount field can be set by * 1. INPUT - the user provides the amount by typing in the field * 2. MAX - The user selects the MAX button and amount is calculated based on * balance - (amount + gasTotal) */ export const AMOUNT_MODES = { INPUT: 'INPUT', MAX: 'MAX', }; export const RECIPIENT_SEARCH_MODES = { MY_ACCOUNTS: 'MY_ACCOUNTS', CONTACT_LIST: 'CONTACT_LIST', }; async function estimateGasLimitForSend({ selectedAddress, value, gasPrice, sendToken, to, data, isNonStandardEthChain, chainId, ...options }) { let isSimpleSendOnNonStandardNetwork = false; // blockGasLimit may be a falsy, but defined, value when we receive it from // state, so we use logical or to fall back to MIN_GAS_LIMIT_HEX. Some // network implementations check the gas parameter supplied to // eth_estimateGas for validity. For this reason, we set token sends // blockGasLimit default to a higher number. Note that the current gasLimit // on a BLOCK is 15,000,000 and will be 30,000,000 on mainnet after London. // Meanwhile, MIN_GAS_LIMIT_HEX is 0x5208. let blockGasLimit = MIN_GAS_LIMIT_HEX; if (options.blockGasLimit) { blockGasLimit = options.blockGasLimit; } else if (sendToken) { blockGasLimit = GAS_LIMITS.BASE_TOKEN_ESTIMATE; } // The parameters below will be sent to our background process to estimate // how much gas will be used for a transaction. That background process is // located in tx-gas-utils.js in the transaction controller folder. const paramsForGasEstimate = { from: selectedAddress, value, gasPrice }; if (sendToken) { if (!to) { // if no to address is provided, we cannot generate the token transfer // hexData. hexData in a transaction largely dictates how much gas will // be consumed by a transaction. We must use our best guess, which is // represented in the gas shared constants. return GAS_LIMITS.BASE_TOKEN_ESTIMATE; } paramsForGasEstimate.value = '0x0'; // We have to generate the erc20 contract call to transfer tokens in // order to get a proper estimate for gasLimit. paramsForGasEstimate.data = generateTokenTransferData({ toAddress: to, amount: value, sendToken, }); paramsForGasEstimate.to = sendToken.address; } else { if (!data) { // eth.getCode will return the compiled smart contract code at the // address. If this returns 0x, 0x0 or a nullish value then the address // is an externally owned account (NOT a contract account). For these // types of transactions the gasLimit will always be 21,000 or 0x5208 const contractCode = Boolean(to) && (await global.eth.getCode(to)); // Geth will return '0x', and ganache-core v2.2.1 will return '0x0' const contractCodeIsEmpty = !contractCode || contractCode === '0x' || contractCode === '0x0'; if (contractCodeIsEmpty && !isNonStandardEthChain) { return GAS_LIMITS.SIMPLE; } else if (contractCodeIsEmpty && isNonStandardEthChain) { isSimpleSendOnNonStandardNetwork = true; } } paramsForGasEstimate.data = data; if (to) { paramsForGasEstimate.to = to; } if (!value || value === '0') { // TODO: Figure out what's going on here. According to eth_estimateGas // docs this value can be zero, or undefined, yet we are setting it to a // value here when the value is undefined or zero. For more context: // https://github.com/MetaMask/metamask-extension/pull/6195 paramsForGasEstimate.value = '0xff'; } } if (!isSimpleSendOnNonStandardNetwork) { // If we do not yet have a gasLimit, we must call into our background // process to get an estimate for gasLimit based on known parameters. paramsForGasEstimate.gas = addHexPrefix( multiplyCurrencies(blockGasLimit, 0.95, { multiplicandBase: 16, multiplierBase: 10, roundDown: '0', toNumericBase: 'hex', }), ); } // The buffer multipler reduces transaction failures by ensuring that the // estimated gas is always sufficient. Without the multiplier, estimates // for contract interactions can become inaccurate over time. This is because // gas estimation is non-deterministic. The gas required for the exact same // transaction call can change based on state of a contract or changes in the // contracts environment (blockchain data or contracts it interacts with). // Applying the 1.5 buffer has proven to be a useful guard against this non- // deterministic behaviour. // // Gas estimation of simple sends should, however, be deterministic. As such // no buffer is needed in those cases. let bufferMultiplier = 1.5; if (isSimpleSendOnNonStandardNetwork) { bufferMultiplier = 1; } else if (CHAIN_ID_TO_GAS_LIMIT_BUFFER_MAP[chainId]) { bufferMultiplier = CHAIN_ID_TO_GAS_LIMIT_BUFFER_MAP[chainId]; } try { // call into the background process that will simulate transaction // execution on the node and return an estimate of gasLimit const estimatedGasLimit = await estimateGas(paramsForGasEstimate); const estimateWithBuffer = addGasBuffer( estimatedGasLimit, blockGasLimit, bufferMultiplier, ); return addHexPrefix(estimateWithBuffer); } catch (error) { const simulationFailed = error.message.includes('Transaction execution error.') || error.message.includes( 'gas required exceeds allowance or always failing transaction', ); if (simulationFailed) { const estimateWithBuffer = addGasBuffer( paramsForGasEstimate.gas, blockGasLimit, 1.5, ); return addHexPrefix(estimateWithBuffer); } throw error; } } export async function getERC20Balance(token, accountAddress) { const contract = global.eth.contract(abi).at(token.address); const usersToken = (await contract.balanceOf(accountAddress)) ?? null; if (!usersToken) { return '0x0'; } const amount = calcTokenAmount( usersToken.balance.toString(), token.decimals, ).toString(16); return addHexPrefix(amount); } // After modification of specific fields in specific circumstances we must // recompute the gasLimit estimate to be as accurate as possible. the cases // that necessitate this logic are listed below: // 1. when the amount sent changes when sending a token due to the amount being // part of the hex encoded data property of the transaction. // 2. when updating the data property while sending NATIVE currency (ex: ETH) // because the data parameter defines function calls that the EVM will have // to execute which is where a large chunk of gas is potentially consumed. // 3. when the recipient changes while sending a token due to the recipient's // address being included in the hex encoded data property of the // transaction // 4. when the asset being sent changes due to the contract address and details // of the token being included in the hex encoded data property of the // transaction. If switching to NATIVE currency (ex: ETH), the gasLimit will // change due to hex data being removed (unless supplied by user). // This method computes the gasLimit estimate which is written to state in an // action handler in extraReducers. export const computeEstimatedGasLimit = createAsyncThunk( 'send/computeEstimatedGasLimit', async (_, thunkApi) => { const state = thunkApi.getState(); const { send, metamask } = state; const isNonStandardEthChain = getIsNonStandardEthChain(state); const chainId = getCurrentChainId(state); if (send.stage !== SEND_STAGES.EDIT) { const gasLimit = await estimateGasLimitForSend({ gasPrice: send.gas.gasPrice, blockGasLimit: metamask.currentBlockGasLimit, selectedAddress: metamask.selectedAddress, sendToken: send.asset.details, to: send.recipient.address?.toLowerCase(), value: send.amount.value, data: send.draftTransaction.userInputHexData, isNonStandardEthChain, chainId, }); await thunkApi.dispatch(setCustomGasLimit(gasLimit)); return { gasLimit, }; } return null; }, ); /** * This method is used to keep the original logic from the gas.duck.js file * after receiving a gasPrice from eth_gasPrice. First, the returned gasPrice * was converted to GWEI, then it was converted to a Number, then in the send * duck (here) we would use getGasPriceInHexWei to get back to hexWei. Now that * we receive a GWEI estimate from the controller, we still need to do this * weird conversion to get the proper rounding. * @param {T} gasPriceEstimate * @returns */ function getRoundedGasPrice(gasPriceEstimate) { const gasPriceInDecGwei = conversionUtil(gasPriceEstimate, { numberOfDecimals: 4, toDenomination: GWEI, fromNumericBase: 'dec', toNumericBase: 'dec', fromCurrency: ETH, fromDenomination: GWEI, }); const gasPriceAsNumber = Number(gasPriceInDecGwei); return getGasPriceInHexWei(gasPriceAsNumber); } /** * Responsible for initializing required state for the send slice. * This method is dispatched from the send page in the componentDidMount * method. It is also dispatched anytime the network changes to ensure that * the slice remains valid with changing token and account balances. To do so * it keys into state to get necessary values and computes a starting point for * the send slice. It returns the values that might change from this action and * those values are written to the slice in the `initializeSendState.fulfilled` * action handler. */ export const initializeSendState = createAsyncThunk( 'send/initializeSendState', async (_, thunkApi) => { const state = thunkApi.getState(); const isNonStandardEthChain = getIsNonStandardEthChain(state); const chainId = getCurrentChainId(state); const eip1559support = isEIP1559Network(state); const { send: { asset, stage, recipient, amount, draftTransaction }, metamask, } = state; // First determine the correct from address. For new sends this is always // the currently selected account and switching accounts switches the from // address. If editing an existing transaction (by clicking 'edit' on the // send page), the fromAddress is always the address from the txParams. const fromAddress = stage === SEND_STAGES.EDIT ? draftTransaction.txParams.from : metamask.selectedAddress; // We need the account's balance which is calculated from cachedBalances in // the getMetaMaskAccounts selector. getTargetAccount consumes this // selector and returns the account at the specified address. const account = getTargetAccount(state, fromAddress); // Default gasPrice to 1 gwei if all estimation fails, this is only used // for gasLimit estimation and won't be set directly in state. Instead, we // will return the gasFeeEstimates and gasEstimateType so that the reducer // can set the appropriate gas fees in state. let gasPrice = '0x1'; let gasEstimatePollToken = null; // Instruct the background process that polling for gas prices should begin gasEstimatePollToken = await getGasFeeEstimatesAndStartPolling(); const { metamask: { gasFeeEstimates, gasEstimateType }, } = thunkApi.getState(); // Because we are only interested in getting a gasLimit estimation we only // need to worry about gasPrice. So we use maxFeePerGas as gasPrice if we // have a fee market estimation. if (gasEstimateType === GAS_ESTIMATE_TYPES.LEGACY) { gasPrice = getGasPriceInHexWei(gasFeeEstimates.medium); } else if (gasEstimateType === GAS_ESTIMATE_TYPES.ETH_GASPRICE) { gasPrice = getRoundedGasPrice(gasFeeEstimates.gasPrice); } else if (gasEstimateType === GAS_ESTIMATE_TYPES.FEE_MARKET) { gasPrice = getGasPriceInHexWei( gasFeeEstimates.medium.suggestedMaxFeePerGas, ); } else { gasPrice = gasFeeEstimates.gasPrice ? getRoundedGasPrice(gasFeeEstimates.gasPrice) : '0x0'; } // Set a basic gasLimit in the event that other estimation fails let gasLimit = asset.type === ASSET_TYPES.TOKEN ? GAS_LIMITS.BASE_TOKEN_ESTIMATE : GAS_LIMITS.SIMPLE; if ( gasEstimateType !== GAS_ESTIMATE_TYPES.NONE && stage !== SEND_STAGES.EDIT && recipient.address ) { // Run our estimateGasLimit logic to get a more accurate estimation of // required gas. If this value isn't nullish, set it as the new gasLimit const estimatedGasLimit = await estimateGasLimitForSend({ gasPrice, blockGasLimit: metamask.currentBlockGasLimit, selectedAddress: fromAddress, sendToken: asset.details, to: recipient.address.toLowerCase(), value: amount.value, data: draftTransaction.userInputHexData, isNonStandardEthChain, chainId, }); gasLimit = estimatedGasLimit || gasLimit; } // We have to keep the gas slice in sync with the draft send transaction // so that it'll be initialized correctly if the gas modal is opened. await thunkApi.dispatch(setCustomGasLimit(gasLimit)); // We must determine the balance of the asset that the transaction will be // sending. This is done by referencing the native balance on the account // for native assets, and calling the balanceOf method on the ERC20 // contract for token sends. let { balance } = account; if (asset.type === ASSET_TYPES.TOKEN) { if (asset.details === null) { // If we're sending a token but details have not been provided we must // abort and set the send slice into invalid status. throw new Error( 'Send slice initialized as token send without token details', ); } balance = await getERC20Balance(asset.details, fromAddress); } return { address: fromAddress, nativeBalance: account.balance, assetBalance: balance, chainId: getCurrentChainId(state), tokens: getTokens(state), gasFeeEstimates, gasEstimateType, gasLimit, gasTotal: addHexPrefix(calcGasTotal(gasLimit, gasPrice)), gasEstimatePollToken, eip1559support, }; }, ); export const initialState = { // which stage of the send flow is the user on stage: SEND_STAGES.INACTIVE, // status of the send slice, either VALID or INVALID status: SEND_STATUSES.VALID, // Determines type of transaction being sent, defaulted to 0x0 (legacy) transactionType: TRANSACTION_ENVELOPE_TYPES.LEGACY, // tracks whether the current network supports EIP 1559 transactions eip1559support: false, account: { // from account address, defaults to selected account. will be the account // the original transaction was sent from in the case of the EDIT stage address: null, // balance of the from account balance: '0x0', }, gas: { // indicate whether the gas estimate is loading isGasEstimateLoading: true, // String token indentifying a listener for polling on the gasFeeController gasEstimatePollToken: null, // has the user set custom gas in the custom gas modal isCustomGasSet: false, // maximum gas needed for tx gasLimit: '0x0', // price in wei to pay per gas gasPrice: '0x0', // maximum price in wei to pay per gas maxFeePerGas: '0x0', // maximum priority fee in wei to pay per gas maxPriorityFeePerGas: '0x0', // expected price in wei necessary to pay per gas used for a transaction // to be included in a reasonable timeframe. Comes from GasFeeController. gasPriceEstimate: '0x0', // maximum total price in wei to pay gasTotal: '0x0', // minimum supported gasLimit minimumGasLimit: GAS_LIMITS.SIMPLE, // error to display for gas fields error: null, }, amount: { // The mode to use when determining new amounts. For INPUT mode the // provided payload is always used. For MAX it is calculated based on avail // asset balance mode: AMOUNT_MODES.INPUT, // Current value of the transaction, how much of the asset are we sending value: '0x0', // error to display for amount field error: null, }, asset: { // type can be either NATIVE such as ETH or TOKEN for ERC20 tokens type: ASSET_TYPES.NATIVE, // the balance the user holds at the from address for this asset balance: '0x0', // In the case of tokens, the address, decimals and symbol of the token // will be included in details details: null, }, draftTransaction: { // The metamask internal id of the transaction. Only populated in the EDIT // stage. id: null, // The hex encoded data provided by the user who has enabled hex data field // in advanced settings userInputHexData: null, // The txParams that should be submitted to the network once this // transaction is confirmed. This object is computed on every write to the // slice of fields that would result in the txParams changing txParams: { to: '', from: '', data: undefined, value: '0x0', gas: '0x0', gasPrice: '0x0', type: TRANSACTION_ENVELOPE_TYPES.LEGACY, }, }, recipient: { // Defines which mode to use for searching for matches in the input field mode: RECIPIENT_SEARCH_MODES.CONTACT_LIST, // Partial, not yet validated, entry into the address field. Used to share // user input amongst the AddRecipient and EnsInput components. userInput: '', // The address of the recipient address: '', // The nickname stored in the user's address book for the recipient address nickname: '', // Error to display on the address field error: null, // Warning to display on the address field warning: null, }, }; const slice = createSlice({ name, initialState, reducers: { /** * update current amount.value in state and run post update validation of * the amount field and the send state. Recomputes the draftTransaction */ updateSendAmount: (state, action) => { state.amount.value = addHexPrefix(action.payload); // Once amount has changed, validate the field slice.caseReducers.validateAmountField(state); if (state.asset.type === ASSET_TYPES.NATIVE) { // if sending the native asset the amount being sent will impact the // gas field as well because the gas validation takes into // consideration the available balance minus amount sent before // checking if there is enough left to cover the gas fee. slice.caseReducers.validateGasField(state); } // validate send state slice.caseReducers.validateSendState(state); }, /** * computes the maximum amount of asset that can be sent and then calls * the updateSendAmount action above with the computed value, which will * revalidate the field and form and recomputes the draftTransaction */ updateAmountToMax: (state) => { let amount = '0x0'; if (state.asset.type === ASSET_TYPES.TOKEN) { const decimals = state.asset.details?.decimals ?? 0; const multiplier = Math.pow(10, Number(decimals)); amount = multiplyCurrencies(state.asset.balance, multiplier, { toNumericBase: 'hex', multiplicandBase: 16, multiplierBase: 10, }); } else { amount = subtractCurrencies( addHexPrefix(state.asset.balance), addHexPrefix(state.gas.gasTotal), { toNumericBase: 'hex', aBase: 16, bBase: 16, }, ); } slice.caseReducers.updateSendAmount(state, { payload: amount, }); // draftTransaction update happens in updateSendAmount }, /** * updates the draftTransaction.userInputHexData state key and then * recomputes the draftTransaction if the user is currently sending the * native asset. When sending ERC20 assets, this is unnecessary because the * hex data used in the transaction will be that for interacting with the * ERC20 contract */ updateUserInputHexData: (state, action) => { state.draftTransaction.userInputHexData = action.payload; if (state.asset.type === ASSET_TYPES.NATIVE) { slice.caseReducers.updateDraftTransaction(state); } }, /** * Initiates the edit transaction flow by setting the stage to 'EDIT' and * then pulling the details of the previously submitted transaction from * the action payload. It also computes a new draftTransaction that will be * used when updating the transaction in the provider */ editTransaction: (state, action) => { state.stage = SEND_STAGES.EDIT; state.gas.gasLimit = action.payload.gasLimit; state.gas.gasPrice = action.payload.gasPrice; state.amount.value = action.payload.amount; state.gas.error = null; state.amount.error = null; state.recipient.address = action.payload.address; state.recipient.nickname = action.payload.nickname; state.draftTransaction.id = action.payload.id; state.draftTransaction.txParams.from = action.payload.from; slice.caseReducers.updateDraftTransaction(state); }, /** * gasTotal is computed based on gasPrice and gasLimit and set in state * recomputes the maximum amount if the current amount mode is 'MAX' and * sending the native token. ERC20 assets max amount is unaffected by * gasTotal so does not need to be recomputed. Finally, validates the gas * field and send state, then updates the draft transaction. */ calculateGasTotal: (state) => { // use maxFeePerGas as the multiplier if working with a FEE_MARKET transaction // otherwise use gasPrice if (state.transactionType === TRANSACTION_ENVELOPE_TYPES.FEE_MARKET) { state.gas.gasTotal = addHexPrefix( calcGasTotal(state.gas.gasLimit, state.gas.maxFeePerGas), ); } else { state.gas.gasTotal = addHexPrefix( calcGasTotal(state.gas.gasLimit, state.gas.gasPrice), ); } if ( state.amount.mode === AMOUNT_MODES.MAX && state.asset.type === ASSET_TYPES.NATIVE ) { slice.caseReducers.updateAmountToMax(state); } slice.caseReducers.validateAmountField(state); slice.caseReducers.validateGasField(state); // validate send state slice.caseReducers.validateSendState(state); }, /** * sets the provided gasLimit in state and then recomputes the gasTotal. */ updateGasLimit: (state, action) => { state.gas.gasLimit = addHexPrefix(action.payload); slice.caseReducers.calculateGasTotal(state); }, /** * Sets the appropriate gas fees in state and determines and sets the * appropriate transactionType based on gas fee fields received. */ updateGasFees: (state, action) => { if ( action.payload.transactionType === TRANSACTION_ENVELOPE_TYPES.FEE_MARKET ) { state.gas.maxFeePerGas = addHexPrefix(action.payload.maxFeePerGas); state.gas.maxPriorityFeePerGas = addHexPrefix( action.payload.maxPriorityFeePerGas, ); state.transactionType = TRANSACTION_ENVELOPE_TYPES.FEE_MARKET; } else { // Until we remove the old UI we don't want to automatically update // gasPrice if the user has already manually changed the field value. // When receiving a new estimate the isAutomaticUpdate property will be // on the payload (and set to true). If isAutomaticUpdate is true, // then we check if the previous estimate was '0x0' or if the previous // gasPrice equals the previous gasEstimate. if either of those cases // are true then we update the gasPrice otherwise we skip it because // it indicates the user has ejected from the estimates by modifying // the field. if ( action.payload.isAutomaticUpdate !== true || state.gas.gasPriceEstimate === '0x0' || state.gas.gasPrice === state.gas.gasPriceEstimate ) { state.gas.gasPrice = addHexPrefix(action.payload.gasPrice); } state.transactionType = TRANSACTION_ENVELOPE_TYPES.LEGACY; } slice.caseReducers.calculateGasTotal(state); }, /** * Sets the appropriate gas fees in state after receiving new estimates. */ updateGasFeeEstimates: (state, action) => { const { gasFeeEstimates, gasEstimateType } = action.payload; let gasPriceEstimate = '0x0'; switch (gasEstimateType) { case GAS_ESTIMATE_TYPES.FEE_MARKET: slice.caseReducers.updateGasFees(state, { payload: { transactionType: TRANSACTION_ENVELOPE_TYPES.FEE_MARKET, maxFeePerGas: getGasPriceInHexWei( gasFeeEstimates.medium.suggestedMaxFeePerGas, ), maxPriorityFeePerGas: getGasPriceInHexWei( gasFeeEstimates.medium.suggestedMaxPriorityFeePerGas, ), }, }); break; case GAS_ESTIMATE_TYPES.LEGACY: gasPriceEstimate = getRoundedGasPrice(gasFeeEstimates.medium); slice.caseReducers.updateGasFees(state, { payload: { gasPrice: gasPriceEstimate, type: TRANSACTION_ENVELOPE_TYPES.LEGACY, isAutomaticUpdate: true, }, }); break; case GAS_ESTIMATE_TYPES.ETH_GASPRICE: gasPriceEstimate = getRoundedGasPrice(gasFeeEstimates.gasPrice); slice.caseReducers.updateGasFees(state, { payload: { gasPrice: getRoundedGasPrice(gasFeeEstimates.gasPrice), type: TRANSACTION_ENVELOPE_TYPES.LEGACY, isAutomaticUpdate: true, }, }); break; case GAS_ESTIMATE_TYPES.NONE: default: break; } // Record the latest gasPriceEstimate for future comparisons state.gas.gasPriceEstimate = addHexPrefix(gasPriceEstimate); }, /** * sets the amount mode to the provided value as long as it is one of the * supported modes (MAX|INPUT) */ updateAmountMode: (state, action) => { if (Object.values(AMOUNT_MODES).includes(action.payload)) { state.amount.mode = action.payload; } }, updateAsset: (state, action) => { state.asset.type = action.payload.type; state.asset.balance = action.payload.balance; if (state.asset.type === ASSET_TYPES.TOKEN) { state.asset.details = action.payload.details; } else { // clear the details object when sending native currency state.asset.details = null; if (state.recipient.error === CONTRACT_ADDRESS_ERROR) { // Errors related to sending tokens to their own contract address // are no longer valid when sending native currency. state.recipient.error = null; } if (state.recipient.warning === KNOWN_RECIPIENT_ADDRESS_WARNING) { // Warning related to sending tokens to a known contract address // are no longer valid when sending native currency. state.recipient.warning = null; } } // if amount mode is MAX update amount to max of new asset, otherwise set // to zero. This will revalidate the send amount field. if (state.amount.mode === AMOUNT_MODES.MAX) { slice.caseReducers.updateAmountToMax(state); } else { slice.caseReducers.updateSendAmount(state, { payload: '0x0' }); } // validate send state slice.caseReducers.validateSendState(state); }, updateRecipient: (state, action) => { state.recipient.error = null; state.recipient.userInput = ''; state.recipient.address = action.payload.address ?? ''; state.recipient.nickname = action.payload.nickname ?? ''; if (state.recipient.address === '') { // If address is null we are clearing the recipient and must return // to the ADD_RECIPIENT stage. state.stage = SEND_STAGES.ADD_RECIPIENT; } else { // if and address is provided and an id exists on the draft transaction, // we progress to the EDIT stage, otherwise we progress to the DRAFT // stage. We also reset the search mode for recipient search. state.stage = state.draftTransaction.id === null ? SEND_STAGES.DRAFT : SEND_STAGES.EDIT; state.recipient.mode = RECIPIENT_SEARCH_MODES.CONTACT_LIST; } // validate send state slice.caseReducers.validateSendState(state); }, updateDraftTransaction: (state) => { // We keep a copy of txParams in state that could be submitted to the // network if the form state is valid. if (state.status === SEND_STATUSES.VALID) { // We don't/shouldn't modify the from address when editing an // existing transaction. if (state.stage !== SEND_STAGES.EDIT) { state.draftTransaction.txParams.from = state.account.address; } // gasLimit always needs to be set regardless of the asset being sent // or the type of transaction. state.draftTransaction.txParams.gas = state.gas.gasLimit; switch (state.asset.type) { case ASSET_TYPES.TOKEN: // When sending a token the to address is the contract address of // the token being sent. The value is set to '0x0' and the data // is generated from the recipient address, token being sent and // amount. state.draftTransaction.txParams.to = state.asset.details.address; state.draftTransaction.txParams.value = '0x0'; state.draftTransaction.txParams.data = generateTokenTransferData({ toAddress: state.recipient.address, amount: state.amount.value, sendToken: state.asset.details, }); break; case ASSET_TYPES.NATIVE: default: // When sending native currency the to and value fields use the // recipient and amount values and the data key is either null or // populated with the user input provided in hex field. state.draftTransaction.txParams.to = state.recipient.address; state.draftTransaction.txParams.value = state.amount.value; state.draftTransaction.txParams.data = state.draftTransaction.userInputHexData ?? undefined; } // We need to make sure that we only include the right gas fee fields // based on the type of transaction the network supports. We will also set // the type param here. We must delete the opposite fields to avoid // stale data in txParams. if (state.eip1559support) { state.draftTransaction.txParams.type = TRANSACTION_ENVELOPE_TYPES.FEE_MARKET; state.draftTransaction.txParams.maxFeePerGas = state.gas.maxFeePerGas; state.draftTransaction.txParams.maxPriorityFeePerGas = state.gas.maxPriorityFeePerGas; if ( !state.draftTransaction.txParams.maxFeePerGas || state.draftTransaction.txParams.maxFeePerGas === '0x0' ) { state.draftTransaction.txParams.maxFeePerGas = state.gas.gasPrice; } if ( !state.draftTransaction.txParams.maxPriorityFeePerGas || state.draftTransaction.txParams.maxPriorityFeePerGas === '0x0' ) { state.draftTransaction.txParams.maxPriorityFeePerGas = state.draftTransaction.txParams.maxFeePerGas; } delete state.draftTransaction.txParams.gasPrice; } else { delete state.draftTransaction.txParams.maxFeePerGas; delete state.draftTransaction.txParams.maxPriorityFeePerGas; state.draftTransaction.txParams.gasPrice = state.gas.gasPrice; state.draftTransaction.txParams.type = TRANSACTION_ENVELOPE_TYPES.LEGACY; } } }, useDefaultGas: (state) => { // Show the default gas price/limit fields in the send page state.gas.isCustomGasSet = false; }, useCustomGas: (state) => { // Show the gas fees set in the custom gas modal (state.gas.customData) state.gas.isCustomGasSet = true; }, updateRecipientUserInput: (state, action) => { // Update the value in state to match what the user is typing into the // input field state.recipient.userInput = action.payload; }, validateRecipientUserInput: (state, action) => { const { asset, recipient } = state; if ( recipient.mode === RECIPIENT_SEARCH_MODES.MY_ACCOUNTS || recipient.userInput === '' || recipient.userInput === null ) { recipient.error = null; recipient.warning = null; } else { const isSendingToken = asset.type === ASSET_TYPES.TOKEN; const { chainId, tokens } = action.payload; if ( isBurnAddress(recipient.userInput) || (!isValidHexAddress(recipient.userInput, { mixedCaseUseChecksum: true, }) && !isValidDomainName(recipient.userInput)) ) { recipient.error = isDefaultMetaMaskChain(chainId) ? INVALID_RECIPIENT_ADDRESS_ERROR : INVALID_RECIPIENT_ADDRESS_NOT_ETH_NETWORK_ERROR; } else if ( isSendingToken && isOriginContractAddress(recipient.userInput, asset.details.address) ) { recipient.error = CONTRACT_ADDRESS_ERROR; } else { recipient.error = null; } if ( isSendingToken && isValidHexAddress(recipient.userInput) && (toChecksumAddress(recipient.userInput) in contractMap || checkExistingAddresses(recipient.userInput, tokens)) ) { recipient.warning = KNOWN_RECIPIENT_ADDRESS_WARNING; } else { recipient.warning = null; } } }, updateRecipientSearchMode: (state, action) => { state.recipient.userInput = ''; state.recipient.mode = action.payload; }, resetSendState: () => initialState, validateAmountField: (state) => { switch (true) { // set error to INSUFFICIENT_FUNDS_ERROR if the account balance is lower // than the total price of the transaction inclusive of gas fees. case state.asset.type === ASSET_TYPES.NATIVE && !isBalanceSufficient({ amount: state.amount.value, balance: state.asset.balance, gasTotal: state.gas.gasTotal ?? '0x0', }): state.amount.error = INSUFFICIENT_FUNDS_ERROR; break; // set error to INSUFFICIENT_FUNDS_ERROR if the token balance is lower // than the amount of token the user is attempting to send. case state.asset.type === ASSET_TYPES.TOKEN && !isTokenBalanceSufficient({ tokenBalance: state.asset.balance ?? '0x0', amount: state.amount.value, decimals: state.asset.details.decimals, }): state.amount.error = INSUFFICIENT_TOKENS_ERROR; break; // if the amount is negative, set error to NEGATIVE_ETH_ERROR // TODO: change this to NEGATIVE_ERROR and remove the currency bias. case conversionGreaterThan( { value: 0, fromNumericBase: 'dec' }, { value: state.amount.value, fromNumericBase: 'hex' }, ): state.amount.error = NEGATIVE_ETH_ERROR; break; // If none of the above are true, set error to null default: state.amount.error = null; } }, validateGasField: (state) => { // Checks if the user has enough funds to cover the cost of gas, always // uses the native currency and does not take into account the amount // being sent. If the user has enough to cover cost of gas but not gas // + amount then the error will be displayed on the amount field. const insufficientFunds = !isBalanceSufficient({ amount: state.asset.type === ASSET_TYPES.NATIVE ? state.amount.value : '0x0', balance: state.account.balance, gasTotal: state.gas.gasTotal ?? '0x0', }); state.gas.error = insufficientFunds ? INSUFFICIENT_FUNDS_ERROR : null; }, validateSendState: (state) => { switch (true) { // 1 + 2. State is invalid when either gas or amount fields have errors // 3. State is invalid if asset type is a token and the token details // are unknown. // 4. State is invalid if no recipient has been added // 5. State is invalid if the send state is uninitialized // 6. State is invalid if gas estimates are loading // 7. State is invalid if gasLimit is less than the minimumGasLimit // 8. State is invalid if the selected asset is a ERC721 case Boolean(state.amount.error): case Boolean(state.gas.error): case state.asset.type === ASSET_TYPES.TOKEN && state.asset.details === null: case state.stage === SEND_STAGES.ADD_RECIPIENT: case state.stage === SEND_STAGES.INACTIVE: case state.gas.isGasEstimateLoading: case new BigNumber(state.gas.gasLimit, 16).lessThan( new BigNumber(state.gas.minimumGasLimit), ): state.status = SEND_STATUSES.INVALID; break; case state.asset.type === ASSET_TYPES.TOKEN && state.asset.details.isERC721 === true: state.status = SEND_STATUSES.INVALID; break; default: state.status = SEND_STATUSES.VALID; // Recompute the draftTransaction object slice.caseReducers.updateDraftTransaction(state); } }, }, extraReducers: (builder) => { builder .addCase(QR_CODE_DETECTED, (state, action) => { // When data is received from the QR Code Scanner we set the recipient // as long as a valid address can be pulled from the data. If an // address is pulled but it is invalid, we display an error. const qrCodeData = action.value; if (qrCodeData) { if (qrCodeData.type === 'address') { const scannedAddress = qrCodeData.values.address.toLowerCase(); if ( isValidHexAddress(scannedAddress, { allowNonPrefixed: false }) ) { if (state.recipient.address !== scannedAddress) { slice.caseReducers.updateRecipient(state, { payload: { address: scannedAddress }, }); } } else { state.recipient.error = INVALID_RECIPIENT_ADDRESS_ERROR; } } } }) .addCase(SELECTED_ACCOUNT_CHANGED, (state, action) => { // If we are on the edit flow the account we are keyed into will be the // original 'from' account, which may differ from the selected account if (state.stage !== SEND_STAGES.EDIT) { // This event occurs when the user selects a new account from the // account menu, or the currently active account's balance updates. state.account.balance = action.payload.account.balance; state.account.address = action.payload.account.address; // We need to update the asset balance if the asset is the native // network asset. Once we update the balance we recompute error state. if (state.asset.type === ASSET_TYPES.NATIVE) { state.asset.balance = action.payload.account.balance; } slice.caseReducers.validateAmountField(state); slice.caseReducers.validateGasField(state); slice.caseReducers.validateSendState(state); } }) .addCase(ACCOUNT_CHANGED, (state, action) => { // If we are on the edit flow then we need to watch for changes to the // current account.address in state and keep balance updated // appropriately if ( state.stage === SEND_STAGES.EDIT && action.payload.account.address === state.account.address ) { // This event occurs when the user's account details update due to // background state changes. If the account that is being updated is // the current from account on the edit flow we need to update // the balance for the account and revalidate the send state. state.account.balance = action.payload.account.balance; // We need to update the asset balance if the asset is the native // network asset. Once we update the balance we recompute error state. if (state.asset.type === ASSET_TYPES.NATIVE) { state.asset.balance = action.payload.account.balance; } slice.caseReducers.validateAmountField(state); slice.caseReducers.validateGasField(state); slice.caseReducers.validateSendState(state); } }) .addCase(ADDRESS_BOOK_UPDATED, (state, action) => { // When the address book updates from background state changes we need // to check to see if an entry exists for the current address or if the // entry changed. const { addressBook } = action.payload; if (addressBook[state.recipient.address]?.name) { state.recipient.nickname = addressBook[state.recipient.address].name; } }) .addCase(initializeSendState.pending, (state) => { // when we begin initializing state, which can happen when switching // chains even after loading the send flow, we set // gas.isGasEstimateLoading as initialization will trigger a fetch // for gasPrice estimates. state.gas.isGasEstimateLoading = true; }) .addCase(initializeSendState.fulfilled, (state, action) => { // writes the computed initialized state values into the slice and then // calculates slice validity using the caseReducers. state.eip1559support = action.payload.eip1559support; state.account.address = action.payload.address; state.account.balance = action.payload.nativeBalance; state.asset.balance = action.payload.assetBalance; state.gas.gasLimit = action.payload.gasLimit; slice.caseReducers.updateGasFeeEstimates(state, { payload: { gasFeeEstimates: action.payload.gasFeeEstimates, gasEstimateType: action.payload.gasEstimateType, }, }); state.gas.gasTotal = action.payload.gasTotal; state.gas.gasEstimatePollToken = action.payload.gasEstimatePollToken; if (action.payload.gasEstimatePollToken) { state.gas.isGasEstimateLoading = false; } if (state.stage !== SEND_STAGES.INACTIVE) { slice.caseReducers.validateRecipientUserInput(state, { payload: { chainId: action.payload.chainId, tokens: action.payload.tokens, }, }); } state.stage = state.stage === SEND_STAGES.INACTIVE ? SEND_STAGES.ADD_RECIPIENT : state.stage; slice.caseReducers.validateAmountField(state); slice.caseReducers.validateGasField(state); slice.caseReducers.validateSendState(state); }) .addCase(computeEstimatedGasLimit.pending, (state) => { // When we begin to fetch gasLimit we should indicate we are loading // a gas estimate. state.gas.isGasEstimateLoading = true; }) .addCase(computeEstimatedGasLimit.fulfilled, (state, action) => { // When we receive a new gasLimit from the computeEstimatedGasLimit // thunk we need to update our gasLimit in the slice. We call into the // caseReducer updateGasLimit to tap into the appropriate follow up // checks and gasTotal calculation. First set isGasEstimateLoading to // false. state.gas.isGasEstimateLoading = false; if (action.payload?.gasLimit) { slice.caseReducers.updateGasLimit(state, { payload: action.payload.gasLimit, }); } }) .addCase(computeEstimatedGasLimit.rejected, (state) => { // If gas estimation fails, we should set the loading state to false, // because it is no longer loading state.gas.isGasEstimateLoading = false; }) .addCase(GAS_FEE_ESTIMATES_UPDATED, (state, action) => { // When the gasFeeController updates its gas fee estimates we need to // update and validate state based on those new values slice.caseReducers.updateGasFeeEstimates(state, { payload: action.payload, }); }); }, }); const { actions, reducer } = slice; export default reducer; const { useDefaultGas, useCustomGas, updateGasLimit, validateRecipientUserInput, updateRecipientSearchMode, } = actions; export { useDefaultGas, useCustomGas, updateGasLimit }; // Action Creators /** * This method is a temporary placeholder to support the old UI in both the * gas modal and the send flow. Soon we won't need to modify gasPrice from the * send flow based on user input, it'll just be a shallow copy of the current * estimate. This method is necessary because the internal structure of this * slice has been changed such that it is agnostic to transaction envelope * type, and this method calls into the new structure in the appropriate way. * * @deprecated - don't extend the usage of this temporary method * @param {string} gasPrice - new gas price in hex wei * @returns {void} */ export function updateGasPrice(gasPrice) { return (dispatch) => { dispatch( actions.updateGasFees({ gasPrice, transactionType: TRANSACTION_ENVELOPE_TYPES.LEGACY, }), ); }; } export function resetSendState() { return async (dispatch, getState) => { const state = getState(); dispatch(actions.resetSendState()); if (state[name].gas.gasEstimatePollToken) { await disconnectGasFeeEstimatePoller( state[name].gas.gasEstimatePollToken, ); } }; } /** * Updates the amount the user intends to send and performs side effects. * 1. If the current mode is MAX change to INPUT * 2. If sending a token, recompute the gasLimit estimate * @param {string} amount - hex string representing value * @returns {void} */ export function updateSendAmount(amount) { return async (dispatch, getState) => { await dispatch(actions.updateSendAmount(amount)); const state = getState(); if (state.send.amount.mode === AMOUNT_MODES.MAX) { await dispatch(actions.updateAmountMode(AMOUNT_MODES.INPUT)); } await dispatch(computeEstimatedGasLimit()); }; } /** * updates the asset to send to one of NATIVE or TOKEN and ensures that the * asset balance is set. If sending a TOKEN also updates the asset details * object with the appropriate ERC20 details including address, symbol and * decimals. * @param {Object} payload - action payload * @param {string} payload.type - type of asset to send * @param {Object} [payload.details] - ERC20 details if sending TOKEN asset * @param {string} [payload.details.address] - contract address for ERC20 * @param {string} [payload.details.decimals] - Number of token decimals * @param {string} [payload.details.symbol] - asset symbol to display * @returns {void} */ export function updateSendAsset({ type, details }) { return async (dispatch, getState) => { const state = getState(); let { balance } = state.send.asset; if (type === ASSET_TYPES.TOKEN) { // if changing to a token, get the balance from the network. The asset // overview page and asset list on the wallet overview page contain // send buttons that call this method before initialization occurs. // When this happens we don't yet have an account.address so default to // the currently active account. In addition its possible for the balance // check to take a decent amount of time, so we display a loading // indication so that that immediate feedback is displayed to the user. await dispatch(showLoadingIndication()); balance = await getERC20Balance( details, state.send.account.address ?? getSelectedAddress(state), ); if (details && details.isERC721 === undefined) { const updatedAssetDetails = await updateTokenType(details.address); details.isERC721 = updatedAssetDetails.isERC721; } await dispatch(hideLoadingIndication()); } else { // if changing to native currency, get it from the account key in send // state which is kept in sync when accounts change. balance = state.send.account.balance; } // update the asset in state which will re-run amount and gas validation await dispatch(actions.updateAsset({ type, details, balance })); await dispatch(computeEstimatedGasLimit()); }; } /** * This method is for usage when validating user input so that validation * is only run after a delay in typing of 300ms. Usage at callsites requires * passing in both the dispatch method and the payload to dispatch, which makes * it only applicable for use within action creators. */ const debouncedValidateRecipientUserInput = debounce((dispatch, payload) => { dispatch(validateRecipientUserInput(payload)); }, 300); /** * This method is called to update the user's input into the ENS input field. * Once the field is updated, the field will be validated using a debounced * version of the validateRecipientUserInput action. This way validation only * occurs once the user has stopped typing. * @param {string} userInput - the value that the user is typing into the field * @returns {void} */ export function updateRecipientUserInput(userInput) { return async (dispatch, getState) => { await dispatch(actions.updateRecipientUserInput(userInput)); const state = getState(); const chainId = getCurrentChainId(state); const tokens = getTokens(state); debouncedValidateRecipientUserInput(dispatch, { chainId, tokens }); }; } export function useContactListForRecipientSearch() { return (dispatch) => { dispatch(updateRecipientSearchMode(RECIPIENT_SEARCH_MODES.CONTACT_LIST)); }; } export function useMyAccountsForRecipientSearch() { return (dispatch) => { dispatch(updateRecipientSearchMode(RECIPIENT_SEARCH_MODES.MY_ACCOUNTS)); }; } /** * Updates the recipient in state based on the input provided, and then will * recompute gas limit when sending a TOKEN asset type. Changing the recipient * address results in hex data changing because the recipient address is * encoded in the data instead of being in the 'to' field. The to field in a * token send will always be the token contract address. * If no nickname is provided, the address book state will be checked to see if * a nickname for the passed address has already been saved. This ensures the * (temporary) send state recipient nickname is consistent with the address book * nickname which has already been persisted to state. * @param {Object} recipient - Recipient information * @param {string} recipient.address - hex address to send the transaction to * @param {string} [recipient.nickname] - Alias for the address to display * to the user * @returns {void} */ export function updateRecipient({ address, nickname }) { return async (dispatch, getState) => { const state = getState(); const nicknameFromAddressBook = getAddressBookEntry(state, address)?.name ?? ''; await dispatch( actions.updateRecipient({ address, nickname: nickname || nicknameFromAddressBook, }), ); await dispatch(computeEstimatedGasLimit()); }; } /** * Clears out the recipient user input, ENS resolution and recipient validation * @returns {void} */ export function resetRecipientInput() { return async (dispatch) => { await dispatch(updateRecipientUserInput('')); await dispatch(updateRecipient({ address: '', nickname: '' })); await dispatch(resetEnsResolution()); await dispatch(validateRecipientUserInput()); }; } /** * When a user has enabled hex data field in advanced settings they will be * able to supply hex data on a transaction. This method updates the user * supplied data. Note, when sending native assets this will result in * recomputing estimated gasLimit. When sending a ERC20 asset this is not done * because the data sent in the transaction will be determined by the asset, * recipient and value, NOT what the user has supplied. * @param {string} hexData - hex encoded string representing transaction data * @returns {void} */ export function updateSendHexData(hexData) { return async (dispatch, getState) => { await dispatch(actions.updateUserInputHexData(hexData)); const state = getState(); if (state.send.asset.type === ASSET_TYPES.NATIVE) { await dispatch(computeEstimatedGasLimit()); } }; } /** * Toggles the amount.mode between INPUT and MAX modes. * As a result, the amount.value will change to either '0x0' when moving from * MAX to INPUT, or to the maximum allowable amount based on current asset when * moving from INPUT to MAX. * @returns {void} */ export function toggleSendMaxMode() { return async (dispatch, getState) => { const state = getState(); if (state.send.amount.mode === AMOUNT_MODES.MAX) { await dispatch(actions.updateAmountMode(AMOUNT_MODES.INPUT)); await dispatch(actions.updateSendAmount('0x0')); } else { await dispatch(actions.updateAmountMode(AMOUNT_MODES.MAX)); await dispatch(actions.updateAmountToMax()); } await dispatch(computeEstimatedGasLimit()); }; } /** * Signs a transaction or updates a transaction in state if editing. * This method is called when a user clicks the next button in the footer of * the send page, signaling that a transaction should be executed. This method * will create the transaction in state (by way of the various global provider * constructs) which will eventually (and fairly quickly from user perspective) * result in a confirmation window being displayed for the transaction. * @returns {void} */ export function signTransaction() { return async (dispatch, getState) => { const state = getState(); const { asset, stage, draftTransaction: { id, txParams }, recipient: { address }, amount: { value }, eip1559support, } = state[name]; if (stage === SEND_STAGES.EDIT) { // When dealing with the edit flow there is already a transaction in // state that we must update, this branch is responsible for that logic. // We first must grab the previous transaction object from state and then // merge in the modified txParams. Once the transaction has been modified // we can send that to the background to update the transaction in state. const unapprovedTxs = getUnapprovedTxs(state); // We only update the tx params that can be changed via the edit flow UX const eip1559OnlyTxParamsToUpdate = { data: txParams.data, from: txParams.from, to: txParams.to, value: txParams.value, gas: txParams.gas, }; const unapprovedTx = unapprovedTxs[id]; const editingTx = { ...unapprovedTx, txParams: Object.assign( unapprovedTx.txParams, eip1559support ? eip1559OnlyTxParamsToUpdate : txParams, ), }; dispatch(updateTransaction(editingTx)); } else if (asset.type === ASSET_TYPES.TOKEN) { // When sending a token transaction we have to the token.transfer method // on the token contract to construct the transaction. This results in // the proper transaction data and properties being set and a new // transaction being added to background state. Once the new transaction // is added to state a subsequent confirmation will be queued. try { const token = global.eth.contract(abi).at(asset.details.address); token.transfer(address, value, { ...txParams, to: undefined, data: undefined, }); dispatch(showConfTxPage()); dispatch(hideLoadingIndication()); } catch (error) { dispatch(hideLoadingIndication()); dispatch(displayWarning(error.message)); } } else { // When sending a native asset we use the ethQuery.sendTransaction method // which will result in the transaction being added to background state // and a subsequent confirmation will be queued. global.ethQuery.sendTransaction(txParams, (err) => { if (err) { dispatch(displayWarning(err.message)); } }); dispatch(showConfTxPage()); } }; } export function editTransaction( assetType, transactionId, tokenData, assetDetails, ) { return async (dispatch, getState) => { const state = getState(); const unapprovedTransactions = getUnapprovedTxs(state); const transaction = unapprovedTransactions[transactionId]; const { txParams } = transaction; if (assetType === ASSET_TYPES.NATIVE) { const { from, gas: gasLimit, gasPrice, to: address, value: amount, } = txParams; const nickname = getAddressBookEntry(state, address)?.name ?? ''; await dispatch( actions.editTransaction({ id: transactionId, gasLimit, gasPrice, from, amount, address, nickname, }), ); } else if (!tokenData || !assetDetails) { throw new Error( `send/editTransaction dispatched with assetType 'TOKEN' but missing assetData or assetDetails parameter`, ); } else { const { from, to: tokenAddress, gas: gasLimit, gasPrice } = txParams; const tokenAmountInDec = getTokenValueParam(tokenData); const address = getTokenAddressParam(tokenData); const nickname = getAddressBookEntry(state, address)?.name ?? ''; const tokenAmountInHex = addHexPrefix( conversionUtil(tokenAmountInDec, { fromNumericBase: 'dec', toNumericBase: 'hex', }), ); await dispatch( updateSendAsset({ type: ASSET_TYPES.TOKEN, details: { ...assetDetails, address: tokenAddress }, }), ); await dispatch( actions.editTransaction({ id: transactionId, gasLimit, gasPrice, from, amount: tokenAmountInHex, address, nickname, }), ); } }; } // Selectors // Gas selectors export function getGasLimit(state) { return state[name].gas.gasLimit; } export function getGasPrice(state) { return state[name].gas.gasPrice; } export function getGasTotal(state) { return state[name].gas.gasTotal; } export function gasFeeIsInError(state) { return Boolean(state[name].gas.error); } export function getMinimumGasLimitForSend(state) { return state[name].gas.minimumGasLimit; } export function getGasInputMode(state) { const isMainnet = getIsMainnet(state); const gasEstimateType = getGasEstimateType(state); const showAdvancedGasFields = getAdvancedInlineGasShown(state); if (state[name].gas.isCustomGasSet) { return GAS_INPUT_MODES.CUSTOM; } if ((!isMainnet && !process.env.IN_TEST) || showAdvancedGasFields) { return GAS_INPUT_MODES.INLINE; } // We get eth_gasPrice estimation if the legacy API fails but we need to // instruct the UI to render the INLINE inputs in this case, only on // mainnet or IN_TEST. if ( (isMainnet || process.env.IN_TEST) && gasEstimateType === GAS_ESTIMATE_TYPES.ETH_GASPRICE ) { return GAS_INPUT_MODES.INLINE; } return GAS_INPUT_MODES.BASIC; } // Asset Selectors export function getSendAsset(state) { return state[name].asset; } export function getSendAssetAddress(state) { return getSendAsset(state)?.details?.address; } export function getIsAssetSendable(state) { if (state[name].asset.type === ASSET_TYPES.NATIVE) { return true; } return state[name].asset.details.isERC721 === false; } // Amount Selectors export function getSendAmount(state) { return state[name].amount.value; } export function getIsBalanceInsufficient(state) { return state[name].gas.error === INSUFFICIENT_FUNDS_ERROR; } export function getSendMaxModeState(state) { return state[name].amount.mode === AMOUNT_MODES.MAX; } export function getSendHexData(state) { return state[name].draftTransaction.userInputHexData; } export function sendAmountIsInError(state) { return Boolean(state[name].amount.error); } // Recipient Selectors export function getSendTo(state) { return state[name].recipient.address; } export function getIsUsingMyAccountForRecipientSearch(state) { return state[name].recipient.mode === RECIPIENT_SEARCH_MODES.MY_ACCOUNTS; } export function getRecipientUserInput(state) { return state[name].recipient.userInput; } export function getRecipient(state) { return state[name].recipient; } // Overall validity and stage selectors export function getSendErrors(state) { return { gasFee: state.send.gas.error, amount: state.send.amount.error, }; } export function isSendStateInitialized(state) { return state[name].stage !== SEND_STAGES.INACTIVE; } export function isSendFormInvalid(state) { return state[name].status === SEND_STATUSES.INVALID; } export function getSendStage(state) { return state[name].stage; }