* Remove `estimatedGas` property from `txMeta`
The `estimatedGas` property was a cache of the gas value estimated for
a transaction when the default gas limit was set. This property wasn't
used anywhere. It may have been useful for debugging purposes, but the
same gas estimate is already stored on the `history` property so it
should be present in state logs regardless.
* Remove `gasLimitSpecified` txMeta property
The `gasLimitSpecified` property of `txMeta` wasn't used for anything.
It might have been useful for debugging purposes, but whether or not
the gas limit was specified can also be determined from looking at the
transaction history, so it's not a huge loss.
* Remove `gasPriceSpecified` txMeta property
The `gasPriceSpecified` property of `txMeta` wasn't used for anything.
It might have been useful for debugging purposes, but whether or not
the gas price was specified can also be determined from looking at the
transaction history, so it's not a huge loss.
* Remove `simpleSend` txMeta property
The `simpleSend` property of `txMeta` was used to ensure a buffer was
not added to the gas limit during gas estimation for simple send
transactions. It was made redundant by #8484, which accomplishes this
without the use of this property.
Previously a transaction would get assigned a default value during the
`addTxGasDefaults` function, after the transaction was added and sent
to the UI.
Instead the transaction is assigned a default value before it gets
added. This flow is simpler to follow, and it avoids the race condition
where the transaction is assigned a value from the UI before this
default is set. In that situation, the UI-assigned value would be
overridden, which is obviously not desired.
`analyzeGasUsage` now returns the results of the analysis rather than
setting them directly on `txMeta`. The caller is now responsible for
mutating `txMeta` instead. Functionally this should be identical to
before.
The simple send gas estimation has been moved out of the gas estimation
module, and into the transaction controller. This was done in an effort
to limit the number of places where `txMeta` is mutated while the
default gas parameters are being set.
The sidebar used to speed up a transaction while it's pending or after
it has failed currently allows editing the gas limit, but that new
limit is ignored. This is especially problematic for transactions that
failed due to a low gas limit, as the problem becomes impossible to fix
by retrying.
The gas limit specified by the user is now used in the speed up
transaction.
Fixes#8156Fixes#7977
* Specify type before parameter name
Various JSDoc `@param` entries were specified as `name {type}` rather
than `{type} name`.
A couple of `@return` entries have been given types as well.
* Use JSDoc optional syntax rather than Closure syntax
* Use @returns rather than @return
* Use consistent built-in type capitalization
Primitive types are lower-case, and Object is upper-case.
* Separate param/return description with a dash
* add PermissionsController
remove provider approval controller
integrate rpc-cap
create PermissionsController
move provider approval functionality to permissions controller
add permissions approval ui, settings page
add permissions activity and history
move some functionality to metamask-inpage-provider
rename siteMetadata -> domainMetadata
add accountsChange notification to inpage provider
move functionality to inpage provider
update inpage provider
Remove 'Connections' settings page (#7369)
add hooks for exposing accounts in settings
rename unused messages in non-English locales
Add external extension id to metadata (#7396)
update inpage provider, rpc-cap
add eth_requestAccounts handling to background
prevent notifying connections if extension is locked
update inpage provider
Fix lint errors
add migration
review fixes
transaction controller review updates
removed unused messages
* Login Per Site UI (#7368)
* LoginPerSite original UI changes to keep
* First commit
* Get necessary connected tab info for redirect and icon display for permissioned sites
* Fix up designs and add missing features
* Some lint fixes
* More lint fixes
* Ensures the tx controller + tx-state-manager orders transactions in the order they are received
* Code cleanup for LoginPerSite-ui
* Update e2e tests to use new connection flow
* Fix display of connect screen and app header after login when connect request present
* Update metamask-responsive-ui.spec for new item in accounts dropdown
* Fix approve container by replacing approvedOrigins with domainMetaData
* Adds test/e2e/permissions.spec.js
* Correctly handle cancellation of a permissions request
* Redirect to home after disconnecting all sites / cancelling all permissions
* Fix display of site icons in menu
* Fix height of permissions page container
* Remove unused locale messages
* Set default values for openExternalTabs and tabIdOrigins in account-menu.container
* More code cleanup for LoginPerSite-ui
* Use extensions api to close tab in permissions-connect
* Remove unnecessary change in domIsReady() in contentscript
* Remove unnecessary private function markers and class methods (for background tab info) in metamask-controller.
* Adds getOriginOfCurrentTab selector
* Adds IconWithFallback component and substitutes for appropriate cases
* Add and utilize font mixins
* Remove unused method in disconnect-all.container.js
* Simplify buttonSizeLarge code in page-container-footer.component.js
* Add and utilize getAccountsWithLabels selector
* Remove console.log in ui/app/store/actions.js
* Change last connected time format to yyyy-M-d
* Fix css associated with IconWithFallback change
* Ensure tracked openNonMetamaskTabsIDs are correctly set to inactive on tab changes
* Code cleanup for LoginPerSite-ui
* Use reusable function for modifying openNonMetamaskTabsIDs in background.js
* Enables automatic switching to connected account when connected domain is open
* Prevent exploit of tabIdOriginMap in background.js
* Remove unneeded code from contentscript.js
* Simplify current tab origin and window opener logic using remotePort listener tabs.queryTabs
* Design and styling fixes for LoginPerSite-ui
* Fix permissionHistory and permission logging for eth_requestAccounts and eth_accounts
* Front end changes to support display of lastConnected time in connected and permissions screens
* Fix lint errors
* Refactor structure of permissionsHistory
* Fix default values and object modifications for domain and permissionsHistory related data
* Fix connecting to new accounts from modal
* Replace retweet.svg with connect-white.svg
* Fix signature-request.spec
* Update metamask-inpage-provider version
* Fix permissions e2e tests
* Remove unneeded delay from test/e2e/signature-request.spec.js
* Add delay before attempting to retrieve network id in dapp in ethereum-on=.spec
* Use requestAccountTabIds strategy for determining tab id that opened a given window
* Improve default values for permissions requests
* Add some message descriptions to app/_locales/en/messages.json
* Code clean up in permission controller
* Stopped deep cloning object in mapObjectValues
* Bump metamask-inpage-provider version
* Add missing description in app/_locales/en/messages.json
* Return promises from queryTabs and switchToTab of extension.js
* Remove unused getAllPermissions function
* Use default props in icon-with-fallback.component.js
* Stop passing to permissions controller
* Delete no longer used clear-approved-origins modal code
* Remove duplicate imports in ui/app/components/app/index.scss
* Use URL instead of regex in getOriginFromUrl()
* Add runtime error checking to platform, promise based extension.tab methods
* Support permission requests from external extensions
* Improve font size and colour of the domain origin on the permission confirmation screen
* Add support for toggling permissions
* Ensure getRenderablePermissionsDomains only returns domains with exposedAccount caveat permissions
* Remove unused code from LoginPerSite-ui branch
* Ensure modal closes on Enter press for new-account-modal.component.js
* Lint fix
* fixup! Login Per Site UI (#7368)
* Some code cleanup for LoginPerSite
* Adds UX for connecting to dapps via the connected sites screen (#7593)
* Adds UX for connecting to dapps via the connected sites screen
* Use openMetaMaskTabIds from background.js to determine if current active tab is MetaMask
* Delete unused permissions controller methods
* Fixes two small bugs in the LoginPerSite ui (#7595)
* Restore `providerRequest` message translations (#7600)
This message was removed, but it was replaced with a very similar
message called `likeToConnect`. The only difference is that the new
message has "MetaMask" in it. Preserving these messages without
"MetaMask" is probably better than deleting them, so these messages
have all been restored and renamed to `likeToConnect`.
* Login per site no sitemetadata fix (#7610)
* Support connected sites for which we have no site metadata.
* Change property containing subtitle info often populated by origin to a more accurate of purpose name
* Lint fix
* Improve disconnection modal messages (#7612)
* Improve disconnectAccountModalDescription and disconnectAllModalDescription messages
* Update disconnectAccountModalDescription app/_locales/en/messages.json
Co-Authored-By: Mark Stacey <markjstacey@gmail.com>
* Improve disconnectAccount modal message clarity
* Adds cancel button to the account selection screen of the permissions request flow (#7613)
* Fix eth_accounts permission language & selectability (#7614)
* fix eth_accounts language & selectability
* fix MetaMask capitalization in all messages
* Close sidebar when opening connected sites (#7611)
The 'Connected Sites' button in the accounts details now closes the
sidebar, if it is open. This was accomplished by pulling the click
handler for that button up to the wallet view component, where another
button already followed a similar pattern of closing the sidebar.
It seemed confusing to me that one handler was in the `AccountsDetails`
container component, and one was handed down from above, so I added
PropTypes to the container component.
I'm not sure that the WalletView component is the best place for this
logic, but I've put it there for now to be consistent with the add
token button.
* Reject permissions request upon tab close (#7618)
Permissions requests are now rejected when the page is closed. This
only applies to the full-screen view, as that is the view permission
requests should be handled in. The case where the user deals with the
request through a different view is handled in #7617
* Handle tab update failure (#7619)
`extension.tabs.update` can sometimes fail if the user interacts with
the tabs directly around the same time. The redirect flow has been
updated to ensure that the permissions tab is still closed in that
case. The user is on their own to find the dapp tab again in that case.
* Login per site tab popup fixes (#7617)
* Handle redirect in response to state update in permissions-connect
* Ensure origin is available to permissions-connect subcomponents during redirect
* Hide app bar whenever on redirect route
* Improvements to handling of redirects in permissions-connect
* Ensure permission request id change handling only happens when page is not null
* Lint fix
* Decouple confirm transaction screen from the selected address (#7622)
* Avoid race condtion that could prevent contextual account switching (#7623)
There was a race condition in the logic responsible for switching the
selected account based upon the active tab. It was asynchronously
querying the active tab, then assuming it had been retrieved later.
The active tab info itself was already in the redux store in another
spot, one that is guaranteed to be set before the UI renders. The
race condition was avoided by deleting the duplicate state, and using
the other active tab state.
* Only redirect back to dapp if current tab is active (#7621)
The "redirect back to dapp" behaviour can be disruptive when the
permissions connect tab is not active. The purpose of the redirect was
to maintain context between the dapp and the permissions request, but
if the user has already moved to another tab, that no longer applies.
* Fix JSX style lint errors
* Remove unused state
* Ensures the tx controller + tx-state-manager orders transactions in the order they are received
* Handle transaction ordering in cases where tx ids are off by more than 1 in tx-state-manager
* Add comment to addUnapprovedTransaction explaining calling _determineTransactionCategory after generateTxMeta
* Sort txes by timestamp of creation instead of id
* tests - create tests for pending middlewares
* transactions - add r,s,v values to the txMeta to match the JSON rpc response
* network - add new middleware for eth_getTransactionByHash that the checks pending tx's for a response value
* transactions/pending - use getTransactionReceipt for checking if tx is in a block
* meta - file rename
* Ensure correct transaction category when sending to contracts but there is no txParams data
* Update gas when pasting address in send
* Gracefully fall back is send.util/estimateGas when blockGasLimit from background is falsy
* Remove network request frontend fallback for blockGasLimit
* Add some needed slow downs to e2e tests
* Add UseNonce toggle
* Get the toggle actually working and dispatching
* Display nonce field on confirmation page
* Remove console.log
* Add placeholder
* Set customNonceValue
* Add nonce key/value to txParams
* remove customNonceValue from component state
* Use translation file and existing CSS class
* Use existing TextField component
* Remove console.log
* Fix lint nits
* Okay this sorta works?
* Move nonce toggle to advanced tab
* Set min to 0
* Wrap value in Number()
* Add customNonceMap
* Update custom nonce translation
* Update styles
* Reset CustomNonce
* Fix lint
* Get tests passing
* Add customNonceValue to defaults
* Fix test
* Fix comments
* Update tests
* Use camel case
* Ensure custom nonce can only be whole number
* Correct font size for custom nonce input
* UX improvements for custom nonce feature
* Fix advanced-tab-component tests for custom nonce changes
* Update title of nonce toggle in settings
* Remove unused locale message
* Cast custom nonce to string in confirm-transaction-base.component
* Handle string conversion and invalid values for custom nonces in handler
* Don't call getNonceLock in tx controller if there is a custom nonce
* Set nonce details for cases where nonce is customized
* Fix incorrectly use value for deciding whether to getnoncelock in approveTransaction
* Default nonceLock to empty object in approveTransaction
* Reapply use on nonceLock in cases where customNonceValue in approveTransaction.
* Show warning message if custom nonce is higher than MetaMask's next nonce
* Fix e2e test failure caused by custom nonce and 3box toggle conflict
* Update nonce warning message to include the suggested nonce
* Handle nextNonce comparison and update logic in lifecycle
* Default nonce field to suggested nonce
* Clear custom nonce on reject or confirm
* Fix bug where nonces are not shown in tx list on self sent transactions
* Ensure custom nonce is reset after tx is created in background
* Convert customNonceValue to number in approve tranasction controller
* Lint fix
* Call getNextNonce after updating custom nonce
* transactions/pending - check nonce against the network and mark as dropped if not included in a block
* transactions/pending - unifiy "dropped" txs
* transactions/pending - test - fix for new expected behavior
* fix comment
* transactions/pending - clean up dropped event
* fix spelling
Co-Authored-By: frankiebee <frankie.diamond@gmail.com>
* nit fix
* test/tx-pending - clarify test description
* Set a default value for code in _determineTransactionCategory
* Adds e2e tests that fail when token txs without gas param are not properly handled.
* Adds unit tests for _determineTransactionCategory
* Base error throwing and simple gas setting in estimateTxGas on transactionCategory
* Adds a transactionCategory to txMeta for use in UI
* Update transaction controller and tx-gas-util documentation on new code param in multiple functions.
* Fixed Vivek's bug
Fixes#5850
What was happening:
It seems that his MetaMask had crashed while some new transactions had
been loading defaults. He probably had a network connectivity issue to
Infura (which we are working with Infura to address).
As a result of this network cutout, his three unapproved transactions
were not marked failed, and were not marked as `loadingDefaults =
false`, as their gas prices had not yet been estimated.
Normally this behavior is supposed to clean itself up when the
transaction controller starts up, via the
`TransactionController._onBootCleanUp()` function, but in this case,
during unlock, that function was unable to do its job because when it
requested the transaction list, the current network was in the `loading`
state, making it proceed as if there were no pending transactions.
To fix this, I am doing two things:
- Setting transactions to loadingDefaults = false in more catch blocks.
- Calling `onBootCleanUp()` when the network store's status changes, so
that it will re-trigger when loading completes.
* Fixed reference
* Fixed infinite loop bug
Was refreshing the tx list on every tx state change instead of just
network changes, creating an infinite loop.
* Add notes to tx updates to clarify logs
* transactions - use safe-event-emitter over events
* tests - pass a platform object on init with a noop showTransactionNotification
* test - fix for tx-state-history-helper trying to reduce an empty array
* deps - safe-event-emitter
* lint
* Add beginning of test
* Resubmit approved transactions on new block
May fix#4343 and related issues, where an error could leave
transactions stranded in the approved state.
* Remove unused test
* Re-approve transactions when retrying approved
* Add retry approved test
* Include approved in pending tx count
* Fix getPendingTxs()
* Linted
* Only throw hash error in submitted state
* Only check submitted txs for block inclusion
* Fix test expectations
