The notification window is now kept open after the connect flow if
there are still pending confirmations. Previously, the notification
window would be closed after the connect flow no matter what, and any
pending confirmations would never be shown to the user.
This was accomplished by redirecting to the home screen after the
connect flow. The logic for deciding whether or not to close the window
is already handled by the home page. This does have the unfortunate
side-effect of briefly rendering the home page before the window
closes, but this is a minor problem that exists already in a number of
other scenarios, and it will be fixed in a subsequent PR.
Fixes#8973
When a suggested token was resolved in a different window, the popup
or notification UI could get stuck with an empty suggested token list,
where either action would throw an error.
This case is now handled by either redirecting or closing the window,
in the popup and notification cases respectively. This check is
performed on both component mount and update.
The "confirm suggested token" page allowed the confirm button to be
pressed even when there were no tokens to confirm. This can happen
sometimes when the page is in the process of redirecting.
The designs for the connect flow show the site `origin` below the site
icon rather than the site name. This was done for security reasons,
and because the site name is often set to an unwieldy long string.
This was accidentally undone in #8815 in the process of fixing a
separate bug. The origin has now been restored. More specific PropTypes
have been set on each use of the `domainMetadata` prop as well.
The mobile sync redirect was failing due to a typo in a prop. It would
fail to redirect correctly in the event of a timeout, or after pressing
'Cancel'.
The 'copy-to-clipboard' icon was removed in #8190, and replaced with a
new 'Copy' icon component. It was still being used in two places
though, on the confirmation page for decryption and on the reveal seed
phrase screen..
The new Copy icon is now used in these two places instead. It has been
given a size of '17' to match the old icon size.
The connected status indicator had been moved left since this popup was
first written. The position of the highlighted portion of the
background has been updated reflect this.
The letter chosen for the fallback site icon was being set
inconsistently throughout the extension. The connect flow was using the
first letter of the `origin` for the letter (which was always `H`,
because `HTTP`), but the connect sites list and the account menu were
using the `name` from the domain metadata.
The `name` is now used for the fallback icon everywhere. A selector
that supplied a default domain metadata object has also been augmented
to use the `hostname` rather than the `origin` as a fallback name, to
match the behavior of the inpage provider.
A new `SiteIcon` component has been created for showing icons
representing web3 sites. The icon has a border and background, and it
has a fallback in case no icon is given. This new component accepts a
`size` prop that controls the size of the icon.
The old `IconWithFallback` component had a hard-coded size in the
SCSS styles for the icon, which was being overridden in a few places.
It was difficult to customize, and overly complicated.
The old `IconWithFallback` component is still used, but it's now
simpler. It only handles rendering the underlying `img` for the icon,
or the fallback letter if no image is given.
A separate `IconBorder` component has been created for the border and
white background used. It's solely used by `SiteIcon` for now, but I
intend to use it elsewhere as well, where this same pattern of a white
background is embedded.
* update connected accounts appearance
* consolidate account alerts
* UnconnectedAccountAlert: use ConnectedAccountsList
* move switch account action out of menu in all views
Co-authored-by: Mark Stacey <markjstacey@gmail.com>
Token transfers will now be hidden on the ETH asset page. Arguably
token transfers are still relevant to show on the ETH asset page
because the gas for token transfers is paid in ETH, but they weren't
being displayed in a way that highlighted this (only the token amount
was shown inline - not the gas price).
We will likely restore token transfers to the ETH asset page at a later
date, after designs have been updated to highlight their relevance to
this page.
The list of accounts shown on the first page of the connect flow takes
up the entire height of the window, even if there aren't enough
accounts to fill the space. This looks strange because of the border
around the account list, especially in the case where there are three
accounts in the list.
The list now cedes space to the footer if it can't fill the space
itself. The extra space is taken by whitespace between the footer and
the list.
* restore and enhance the time est feature
background: we had a feature for showing a time estimate on pending txs
that was accidently removed during the redesign implementation. This PR
restores that feature and also enhances it:
1. Displays the time estimate on all views instead of just fullscreen
2. Uses Intl.RelativeTimeFormat to format the time
3. Adds a way to toggle the feature flag.
4. Uses a hook to calculate the time remaining instead of a component
* Update app/_locales/en/messages.json
Co-authored-by: Mark Stacey <markjstacey@gmail.com>
* do not display on test nets
Co-authored-by: Mark Stacey <markjstacey@gmail.com>
The asset page component has been split into three parts: the main
asset page wrapper, and a component for the content (either token or
native currency). This makes it easier to add functionality that is
specific to either token asset pages or native currency asset pages.
'Activity' is a better name for this tab because it contains more than
just transactions. Signature requests are also included, and more non-
transaction activity may be included in the future.
The `eth-contracts-metadata` export was mutated in `token-list.js` to
add the token address to the contract metadata, and this was taken
advantage of in the token search component.
Instead, the address is now added to a copy of the token metadata in
the one place it's used. The module export is no longer mutated, and
the unused `defaultTokens` variable in `token-list.js` has been
removed.
The `confirm-approve` page has been converted from a set of container/
component components to a functional component. The `withTokenTracker`
higher-order component has been deleted, as it was replaced by the
`useTokenTracker` hook.
The `TokenBalance` component now uses the new `useTokenTracker` hook
instead of the `withTokenTracker` higher-order component. The component
was converted from a split container/component to a functional
component so that the hook could be used.
The prop `withSymbol` was removed from a few call sites, as it was no
longer used. An empty string was substituted for any falsy `string` or
`symbol` because that's what the `withTokenTracker` higher-order
component did.
Each "message" requiring a user confirmation has a unique `type`
property. These `type` properties have all been added as enums, and the
enum is now used wherever the literal string was used previously.
This matches the box shadow on the asset page. Some CSS specificity
hijinks were required to override the base `Tabs` CSS rules, and a new
`tabsClassName` prop was added to the `Tabs` component.
The `disabled` prop being passed to the `PageContainer` component in
the render function for the `AddToken` component was a string in some
cases. It should always be a boolean. It has been cast to a boolean in
the one case where it was a string.
A new page has been created for viewing assets. This replaces the old
`selectedToken` state, which previously would augment the home page
to show token-specific information.
The new asset page shows the standard token overview as seen previously
on the home page, plus a history filtered to show just transactions
relevant to that token.
The actions that were available in the old token list menu have been
moved to a "Token Options" menu that mirrors the "Account Options"
menu.
The `selectedTokenAddress` state has been removed, as it is no longer
being used for anything.
`getMetaMetricState` has been renamed to `getBackgroundMetaMetricState`
because its sole purpose is extracting data from the background state
to send metrics from the background. It's not really a selector, but
it was convenient for it to use the same selectors the UI uses to
extract background data, so I left it there for now.
A new Redux store has been added to track state related to browser history.
The most recent "overview" page (i.e. the home page or the asset page) is
currently being tracked, so that actions taken from the asset page can return
the user back to the asset page when the action has finished.
The third and fourth parameters were unused, so they have been removed.
The tests descriptions for both `getToErrorObject` and
`getToWarningObject` have been improved as well.
The chosen token in the `send` flow was set from one of two places:
`metamask.selectedTokenAddress` or `metamask.send.token`. The former is
used most of the time, but the latter is used for the 'Edit' button
shown in the upper-left of the confirmation UI.
The send flow will now exclusively use `metamask.send.token` for the
token state during the send flow. `metamask.selectedTokenAddress` is
now only used for the selected token state on the Home screen. This
simplifies the Redux state, as the send token is now in one place
instead of two, and `metamask.selectedTokenAddress` has only one
purpose.
The `TokenInput` component now takes the token as a prop, instead of
using the `selectedTokenAddress` state. The `UserPreferencedTokenInput`
component that wrapped `TokenInput` has also been updated to take the
token as a prop.
The transaction list now filters by token in the `TransactionList`
component instead of in the transaction selector. This was done in
preparation for the asset page work.
Technically this approach is slightly less efficient than before, as
we're now filtering the transactions after they've been grouped
together rather than beforehand. The difference is minimal though, and
this method is more correct.
The old filtering was broken because it inappropriately filtered out
cancel transactions. Cancel transactions always have the `to` address
set to the same as the `from` address, and the token filter only
returned transactions where the `to` address was set to the token
address.
Now that we're only filtering by the `to` address of the initial
transaction, token transaction groups will be included in their
entirety, including any cancel transactions.
The fullscreen UI now shows roughly the same design as the popup UI.
A few additional changes depicted in the new fullscreen designs will
be implemented in subsequent PRs (e.g. the inline buttons on assets)
This was done now to make asset pages easier to implement. Implementing
asset pages solely for the popup UI would have been complicated by the
fact that we use viewport size to switch between the two layouts, so we
would have had to re-route upon resizing the window.
The `TransactionViewBalance` component has been split into three
separate components. This was done primarily to make the asset page
easier to implement. Also the name `TransactionViewBalance` didn't
describe this component very well anymore.
Instead of the Ethereum and token-specific logic being in the same
component, the two cases were split into the `EthOverview` and
`TokenOverview` components respectively. They both use the
`WalletOverview` component, which has the structure shared by both
cases.
This changeset updates the `getOriginOfCurrentTab` selector and the container
for the ConnectedSites page to use `activeTab.origin` instead of parsing the
URL. The `activeTab` URL is parsed in `queryCurrentActiveTab` before the UI is
launched and any subsequent parsing of the URL is unnecessary.
See `queryCurrentActiveTab` in `ui.js:86` [1].
[1]:e7bb0876f5/app/scripts/ui.js (L86-L118)
The tabs on the Home page have been updated to match the new home
screen designs.
A new `activeClassName` prop was added to the `Tab` component to allow
applying different styles to the active tab state.
I ran into specificity problems when overriding the default `Tab` styles
because the import order of our CSS is bizarre and wrong. For now I've
used a crude workaround, but we can fix this properly later by changing
the import order to place styles likely to be overridden first.
Add alert suggesting that the user switch to a connected account. This
alert is displayed when the popup is opened over an active tab that is
connected to some account, but not the current selected account. The
user can choose to switch to a connected account, or dismiss the alert.
This alert is only shown once per account switch. So if the user
repeatedly opens the popup on a dapp without switching accounts, it'll
only be shown the first time. The alert also won't be shown if the user
has just dismissed an "Unconnected account" alert on this same dapp
and account, as that would be redundant.
The alert has a "Don't show me this again" checkbox that allows the
user to disable the alert. It can be re-enabled again on the Alerts
settings page.
The unconnected account alert can now be disabled. A "don't show this
again" checkbox has been added to the alert, which prevents that alert
from being shown in the future.
An alert settings page has been added to the settings as well. This
page allows the user to disable or enable any alert.
A change made in #8284 had the unintended side-effect of making this
scrollbar appear on the home screen. Previously it was scrollable
without any scroll bar being visible.
