The app header would sometimes mistakenly not get rendered while on the
Home screen. This could happen when a permission request was made while
the UI was open, to either the browser action popup or the fullscreen
UI.
This was caused by faulty logic in the top-level router component. It
would hide the app header if there was a pending permission request,
presumably because the author assumed that a redirect to the permission
flow would shortly follow. This redirect only happens on mount though,
not if the UI was already open when the permission request was
submitted.
The intent of this logic was to hide a brief flash of the app header
prior to rendering the permission flow. This brief flash has now been
restored, which is unfortunate, but is better than the missing app
header bug. We can revisit a solution to removing this flash in the
future, hopefully in a manner that avoids this bug and works for all
notification UI cases.
If a notification popup was opened while the user was partway through
the swaps flow, the notification would display the swaps flow instead
of whatever action triggered the popup (e.g. a connect request or a
confirmation). This is confusing and potentially dangerous, as the
user might mistakenly think the swap was triggered by a dapp.
The swap redirects are now prevented in the notification UI. The user
will still be redirected to an in-progress swap flow if they open the
browser action popup or the fullscreen UI, but not on the notification
popup that is triggered by dapp actions.
* Remove network config store
* Remove inline networks variable in network controller
* Re-key network controller 'rpcTarget' to 'rpcUrl'
* Require chainId in lookupNetwork, implement eth_chainId
* Require chain ID in network form
* Add alert, migrations, and tests
* Add chainId validation to addToFrequentRpcList
* Update public config state selector to match new network controller
state
* Use network enums in networks-tab.constants
* Ensure chainId in provider config is current
* Update tests
* Fix dismiss button on unconnected alert modal
Set button type to primary, rounded, and set `!important` on css class width
* Update ui/app/components/app/alerts/unconnected-account-alert/unconnected-account-alert.scss
* Add unconnected-account-alert to popover component classname to simplify css selector.
Co-authored-by: Brad Decker <git@braddecker.dev>
Add a prop to the `ButtonGroup` component to make it act as a group of
radio buttons, rather than a group of regular buttons. These commits
were written by @danjm - I just pulled them into this branch.
* Show token symbol when token amount string is long
Fixes#9318
This essentially separates the token cell list item title/token amount and the token symbol.
I do request advice/recomendations on how to better handle the new `subTtitle` which I set the token symbol to and the `subtitle` https://github.com/MetaMask/metamask-extension/blob/develop/ui/app/components/app/asset-list-item/asset-list-item.js#L99.
* Individually test token balance and token symbol and their associated css element
* Feedback commit
* Classname and css overflow for title with string.
This change moves warning message from `add-recipient` component to `send-content`. Currently
whenever provided address is a valid eth address `send-content` is rendered instead of `add-recipient`
this is why warnings never popped up.
* Use verifyPassword instead of submitPassword when exporting priv key
Fixes#9287 which was when submitPassword is called will fully clear the keyring state
https://github.com/MetaMask/KeyringController/blob/master/index.js#L155ad823d0ac1/index.js (L562)ad823d0ac1/index.js (L726)
Also, pass hideWarning action prop so it will clear the appState.warning if a correct password is never provided on componentWillUnmount
* Hide Warning on componentWillUnmount
* Update exportAccount tests to verifyPassword
* Update ui/app/store/actions.js
Co-authored-by: Mark Stacey <markjstacey@gmail.com>
* MetaMask mascot support for provided directions targets and toggling followMouse
* Fixes for mascot.component.js
* Update metamask-logo version to 2.4.0
* Lint fix
* Fix mouse follow updating
Co-authored-by: Mark Stacey <markjstacey@gmail.com>
* Improve mascot story name
Co-authored-by: Mark Stacey <markjstacey@gmail.com>
* Update package.json
Co-authored-by: Mark Stacey <markjstacey@gmail.com>
* Lint fix
Co-authored-by: Mark Stacey <markjstacey@gmail.com>
* Add react-testing-library
Adds react-testing-library as a dependency, creates a wrapper function with Provider store/I18n context support, and implements it in unconnected-account-alert.
* Refactor renderWithProvider store to extra param, instead of component prop store
this moves very little code around, to enable deleting files that are
no longer used or necessary. There are a few more things to move and
delete that will be handled in a seperate PR after this one.
Follows the previously set pattern of colocating styles along side the
consuming components. This one was really straight forward and just a
reorganization of files and imports. No code changes occurred.
The old tooltip component was only used in two places. Removing those usages
was simple and straight forward. So, instead of colocating the old tooltip
styles with the deprecated tooltip component, I removed all old styles and
made tooltip-v2 now simply 'tooltip' and removed the deprecated component.
Follows the previously set pattern of colocating styles along side the
consuming components. This one was really straight forward and just a
reorganization of files and imports. No code changes occurred.
The only place that these .menu styles were being used was the account-menu by way of components/app/dropdowns/menu. Because account-menu is the only place that used these styles I moved them to exist with the account-menu
Follows previous patterns of moving styles to exist alongside the components that use them. I would like these styles to be updated to use BEM syntax as well but I am holding off for a future PR to improve these styles.
* Clear Account Details in AppState
We store sensitive information in the AppState under accountDetail for when the modal is active and present. This adds a new action/reducer and componentWillUnmount to clean up the persisted data left after leaving the modal.
* Remove reduntant clearAccountDetails call when clicking done button
This change tidies up the implementation of `ConnectHardwareForm#checkIfUnlocked`—passing
an `async` function to `forEach` doesn't ensure that the one is run before the other.
* Fix require-unicode-regexp issues
See [`require-unicode-regexp`](https://eslint.org/docs/rules/require-unicode-regexp) for more information.
This change enables `require-unicode-regexp` and fixes the issues raised by the rule.
* Remove case-insensitive flag from regexps
This one gets a bit more complicated because the styles were interwoven and needed to be untangled to be moved. Essentially, though, the goal is to put the styles where they make the most sense and colocate them with their components.
Moves the still alive deposit-ether-modal styles to be colocated with it's component, as per the examples already in place in the components/modal folder
The `currentPath` parameter passed to our metrics utility had been
passed the full URL rather than just the path, contrary to what the
name would imply. We only used the path portion, so passing the full
URL did lead to complications.
Now just the `pathname` is passed in, rather than the full URL. This
simplifies the metrics logic, and it incidentally fixes two bugs.
The main bug fixed is regarding Firefox metrics. Previously we had
assumed the `currentPath` would start with `chrome-extension://`, which
of course was not true on Firefox. This lead to us incorrectly parsing
the `currentPath`, so path tracking was broken for Firefox events.
This broken parsing is now bypassed entirely, so metrics should now
work the same on Firefox as on Chrome.
The second bug was that we were incorrectly setting the tracking URL
for background events during tests. As a result, we were incorrectly
detecting ourselves as an internal site that had referred the user to
us. But this was not of major concern, since it only affected test
metrics (which get sent to the development Matomo project).
Lastly, this change let us discard the `pathname` parameter used in
the `overrides` parameter of the `metricsEvent` function. Now that
`currentPath` is equivalent to `pathname`, the `pathname` parameter is
redundant.
* Remove `url` parameter from `metricsEvent`
The `url` parameter was used to override the `currentPath`, but it
never worked correctly. It was supposed to be used for setting the
`url` query parameter that was sent to Matomo, but `currentPath` was
always used even if it `url` was set and `currentPath` was empty.
Instead, `currentPath` is now always used. There was never a need to
provide an "override" for `currentPath` when it can be set directly.
The metrics provider does set `currentPath` automatically by default,
but this can be overwritten already by passing a second parameter to
`metricsEvent`.
There were two places this `url` parameter was being used: background
events, and path changes. Background events were submitted with no
`currentPath`, so because of the bug with the `url` parameter, the
metrics utility would crash upon each event. So those were never
actually sent. This commit will fix that crash.
The `currentPath` parameter was supplied as an empty string for the
path change events, so those never crashed. They just had the `url`
query string parameter set incorrectly (to an empty string). It should
now be correctly populated, which should mean we'll be capturing all
path changes now. Previously we were only capturing path changes to
pages that happened to include an event, because of this blank `url`
problem.
* Use `url` query parameter as fallback for generating `pv_id`
The `pv_id` parameter currently isn't generated correctly on Firefox,
as the generation assumes that the current URL starts with
`chrome-extension://`. The `url` query parameter is still unique for
each path, so it's probably good enough for generating an id for each
page.
This is just a temporary fix; it will be removed in a future PR, where
Firefox will be properly supported.
The MetaMetrics project ID can now be set via environment variable. It
has not been set yet in practice, so for now the old project IDs will
still be used. This is in preparation for migrating to a new project.
e2e tests will now reference the development MetaMetrics project
instead of the production one. The metrics endpoint should be stubbed
out during e2e tests anyway, but this seemed like a better default
regardless.
The UI would crash upon deleting a contact from the contact list. This
happened for two reasons: the deletion could result in a re-render
before the `history.push` finished navigating back to the contact list
(it was a race condition), and the contact entry left behind an invalid
`identities` entry when it was removed.
The first problem was fixed by making the container components for view
and edit contact more tolerant of being passed an `address` that
doesn't correspond to a contact. If they are given an address without a
contact, `null` is passed to the component via the `address` prop. The
component will redirect back to the list when this happens instead
rendering. This is more awkward than I'd like, but it was the most
sensible way of handling this I could think of without making much more
drastic changes to how we're handling routing here.
The second problem was caused by the `setAccountLabel` call, which was
used to ensure the contact entry for any wallet accounts was kept
in-sync with the account label. This was being called even for non-
wallet accounts though, which is where this problem arose. This step is
now skipped for non-wallet accounts.
Fixes#9019
There were two cases where bad gas estimate data was resulting in
crashes. These two places have been wrapped in a `try ... catch` to
handle the absence of gas estimate data.
The errors are still reported to Sentry so that we can track down the
root cause of this corrupted gas estimate data at some point in the
future. We plan on adding additional context to Sentry soon that should
help with this.
Fixes#8992
The Home page component is responsible for closing the notification
window and triggering redirects in various situations. When this
happens, the home page is briefly rendered before the redirect/close
happens. This is a waste of cycles, and is distracting for users.
We now render nothing if the page is in the process of redirecting or
reloading. None of the redirects handled in this component are for sub-
pages, so we don't need the Home page to render in any of these cases.
We were already doing this for redirects to transaction confirmations,
but now we're taking the same approach for all redirects, and for the
cases where the window is closed.
The notification window is now kept open after the connect flow if
there are still pending confirmations. Previously, the notification
window would be closed after the connect flow no matter what, and any
pending confirmations would never be shown to the user.
This was accomplished by redirecting to the home screen after the
connect flow. The logic for deciding whether or not to close the window
is already handled by the home page. This does have the unfortunate
side-effect of briefly rendering the home page before the window
closes, but this is a minor problem that exists already in a number of
other scenarios, and it will be fixed in a subsequent PR.
Fixes#8973
The loading indication had remained after successfully signing with
`personal_sign`. This mistake was introduced accidentally in #8434.
This is noticeable if you confirm the signature in the popup UI or
fullscreen UI, as they remain open after signing. The notification UI
closes after signing without waiting for this loading indicator to be
removed.
The styles for the `ListItem` component were recently broken in #8989
because of a change made by `stylelint`. It incorrectly removed the
`fr` unit because of the `length-zero-no-unit` rule. This was a bug
that has since been fixed in `stylelint`; it should have left the `fr`
unit in this case.
The vendored CSS required by `react-tippy` is now imported instead of
inlined. This should result in no functional changes, and it makes it
easier to lint our styles.
This was originally inlined in #3120 when `react-tippy` was first added
to the project. It has not been updated since then, so I don't think
there's any risk this has gotten out-of-sync.
This tests the `personal_sign` method using the test dapp. This test
reflects part of the `confirm-sig-requests` integration test, which
tests the confirmation of a `personal_sign` signature request.
A `data-testid` prop was added to the 'Sign' button on the signature
request confirmation page, to make it easier to select the 'Sign'
button reliably.
Both the primary and secondary balance components on `EthOverview` now
have `data-testid` props, so that they can be more easily referenced in
e2e tests.
This required the addition of a `data-testid` prop to the component
`UserPreferencedCurrencyDisplay`, which is passed through to the
underlying `CurrencyDisplay` component.
When a suggested token was resolved in a different window, the popup
or notification UI could get stuck with an empty suggested token list,
where either action would throw an error.
This case is now handled by either redirecting or closing the window,
in the popup and notification cases respectively. This check is
performed on both component mount and update.
The "confirm suggested token" page allowed the confirm button to be
pressed even when there were no tokens to confirm. This can happen
sometimes when the page is in the process of redirecting.
The inline speedup and speedup cancellation buttons in the activity log
were broken. An exception would be thrown upon either button being
clicked, and nothing would happen from the user's perspective.
Both handlers were being passed a transaction id, which was a holdover
from before the transaction list redesign. The handlers passed for
these two actions now have the transaction id embedded, so it doesn't
need to be passed in anymore. They expect the click event to be passed
through instead.
The handlers passed also didn't handle closing the transaction details
modal when clicked. After fixing the first problem, they still didn't
work because the speedup/cancel dialog was shown behind the transaction
details modal.
Both issues are now fixed. Both buttons now close the transaction
details modal, and trigger the appropriate action.
Previously the `getMessage` function would throw if a substitution was
falsey. Now it will accept any substitution, including `undefined`.
A substitution of `null` or `undefined` will still be reported to
Sentry and printed to the console as an error, but it will not
interrupt execution. Any `null` or `undefined` substitutions will be
rendered as empty strings.
Ideally we'd never pass in `null` or `undefined` as a substitution, but
in practice this sometimes just occurs breifly between renders, which
isn't a severe enough problem to justify crashing the UI.
The detection of React component substitutions has been updated as
well, to ensure that `null` values aren't counted as React
substitutions.
The CSS `opacity` rule accepts percentages on newer browsers, but some
older browser versions we support (e.g. Firefox v60) doesn't support
them. A number is now used instead, which is supported by all browsers
we support.
We were including the polyfill for the `Intl.RelativeTimeFormat` API,
but we weren't including any locale data. This polyfill doesn't work
without the locale data for whichever locale you're formatting.
The data for all locales we support is now included. The locale data
is loaded from disk as-needed (during app startup, and upon each change
in locale).
The `getMessage` function in `i18n-helper` was assuming that any
substitutions passed into the transaction function were used by the
corresponding localized message. However, some messages are
intentionally ignoring substitutions passed in. This was done to
simplify the UI logic, so the same substitutions could be passed in for
many different messages, even if some don't use them.
For example, `transactionCancelSuccess` is passed two substitutions but
only uses the second one. `transactionErrored` is passed in two, but
uses neither.
`getMessage` has been updated to no longer make that assumption. It
will now only throw an error if the localized message expects a
substitution that was not given. A given substitution that is unused
results in no error.
There was a case where the `activeTab.origin` was not set, yet the user
could still navigate to the "Connected accounts" modal, which assumes
that `activeTab.origin` is set. This would happen in Firefox when the
user opened the popup on a page internal to Firefox (e.g.
`about:blank`). The connected status indicator would still be shown,
but the UI would crash when it was clicked.
The connected status indicator is now hidden whenever
`activeTab.origin` is falsy. The 'Unconnected account' alert has also
been made impossible to trigger in that circumstance.
The designs for the connect flow show the site `origin` below the site
icon rather than the site name. This was done for security reasons,
and because the site name is often set to an unwieldy long string.
This was accidentally undone in #8815 in the process of fixing a
separate bug. The origin has now been restored. More specific PropTypes
have been set on each use of the `domainMetadata` prop as well.
The account list on the unconnected account alert was in the wrong
order; they were in the order provided by the permissions controller
rather than by last active.
The accounts are now sorted correctly; first by last active, second by
the keyring controller order.
The `getPermittedIdentitiesForCurrentTab` selector was removed because
it is no longer used.
The mobile sync redirect was failing due to a typo in a prop. It would
fail to redirect correctly in the event of a timeout, or after pressing
'Cancel'.
The 'copy-to-clipboard' icon was removed in #8190, and replaced with a
new 'Copy' icon component. It was still being used in two places
though, on the confirmation page for decryption and on the reveal seed
phrase screen..
The new Copy icon is now used in these two places instead. It has been
given a size of '17' to match the old icon size.
We were showing exported private keys in all upper case. This is
atypical, and many other wallets (e.g. MyCrypto) expect private keys
for imported accounts to be lower-cased. Our own account import is
tolerant of either case.
in both permission flows the checkboxes were using the fa-check icon, and in the case
of the connected accounts popover the color of the icon was wrong. It occurred to me
while simply fixing that color would have been easier, we will be adding permissions
at some point in the future that a user will be able to 'uncheck'. This PR replaces
the usages of those icons with the Checkbox component that is equipped to handle the
interactivity of checking/unchecking.
Fixes#8835
In cases where the registry failed to load, and the sig is set to `{}` on this line: e85b162651/ui/app/helpers/utils/transactions.util.js (L78) this proceeds to set the method prefix to `{}` in knownMethodData.
Additionally check if the method prefix object is empty to proceed call getMethodDataAsync again.
I could only reproduce by intentionally failing the method registry lookup and found this solution. I could not find an instance where the registry consistently failed to lookup even on slow/throttled/high latency networks.
The connected status indicator had been moved left since this popup was
first written. The position of the highlighted portion of the
background has been updated reflect this.
* fix overflowing contract names and origins
Moves heading and subtitle into divs with h3/h2 children so that the
div can be display flex and still have ellipses overflow. Only the
heading was display flex but I wanted the two to have similar structure.
this allows subheading to be display flex in the future.
Also uses stripHttpSchemes to remove that from origin in the subheading
* rtl ellipses on domain
* Update ui/app/components/app/transaction-list-item/index.scss
Co-authored-by: Mark Stacey <markjstacey@gmail.com>
Co-authored-by: Mark Stacey <markjstacey@gmail.com>
The 'Expand view' button in the 'Account Options' menu was still being
shown on the fullscreen UI. This button is not useful in fullscreen, as
all it does is open the fullscreen UI. It is now hidden on the
fullscreen UI.
The letter chosen for the fallback site icon was being set
inconsistently throughout the extension. The connect flow was using the
first letter of the `origin` for the letter (which was always `H`,
because `HTTP`), but the connect sites list and the account menu were
using the `name` from the domain metadata.
The `name` is now used for the fallback icon everywhere. A selector
that supplied a default domain metadata object has also been augmented
to use the `hostname` rather than the `origin` as a fallback name, to
match the behavior of the inpage provider.
