ESLint rules have been added to enforce our JSDoc conventions. These
rules were introduced by updating `@metamask/eslint-config` to v9.
Some of the rules have been disabled because the effort to fix all lint
errors was too high. It might be easiest to enable these rules one
directory at a time, or one rule at a time.
Most of the changes in this PR were a result of running
`yarn lint:fix`. There were a handful of manual changes that seemed
obvious and simple to make. Anything beyond that and the rule was left
disabled.
The 4Byte API can sometimes fail during e2e tests with a 502 error.
Ideally we would avoid calling it at all during e2e tests, but in the
meantime we shouldn't treat this as a reason to fail the e2e test.
We have multiple fallbacks for 4Byte, it isn't relied upon by any
tests.
* Make this a form
Similar to "import-with-seed-phrase" I would like to be able to restore my vault by pressing `<enter>` on my keyboard.
* actually test enter
* preventDefault()
# Permission System 2.0
## Background
This PR migrates the extension permission system to [the new `PermissionController`](https://github.com/MetaMask/snaps-skunkworks/tree/main/packages/controllers/src/permissions).
The original permission system, based on [`rpc-cap`](https://github.com/MetaMask/rpc-cap), introduced [`ZCAP-LD`](https://w3c-ccg.github.io/zcap-ld/)-like permissions to our JSON-RPC stack.
We used it to [implement](https://github.com/MetaMask/metamask-extension/pull/7004) what we called "LoginPerSite" in [version 7.7.0](https://github.com/MetaMask/metamask-extension/releases/tag/v7.7.0) of the extension, which enabled the user to choose which accounts, if any, should be exposed to each dapp.
While that was a worthwhile feature in and of itself, we wanted a permission _system_ in order to enable everything we are going to with Snaps.
Unfortunately, the original permission system was difficult to use, and necessitated the creation of the original `PermissionsController` (note the "s"), which was more or less a wrapper for `rpc-cap`.
With this PR, we shake off the yoke of the original permission system, in favor of the modular, self-contained, ergonomic, and more mature permission system 2.0.
Note that [the `PermissionController` readme](https://github.com/MetaMask/snaps-skunkworks/tree/main/packages/controllers/src/permissions/README.md) explains how the new permission system works.
The `PermissionController` and `SubjectMetadataController` are currently shipped via `@metamask/snap-controllers`. This is a temporary state of affairs, and we'll move them to `@metamask/controllers` once they've landed in prod.
## Changes in Detail
First, the changes in this PR are not as big as they seem. Roughly half of the additions in this PR are fixtures in the test for the new migration (number 68), and a significant portion of the remaining ~2500 lines are due to find-and-replace changes in other test fixtures and UI files.
- The extension `PermissionsController` has been deleted, and completely replaced with the new `PermissionController` from [`@metamask/snap-controllers`](https://www.npmjs.com/package/@metamask/snap-controllers).
- The original `PermissionsController` "domain metadata" functionality is now managed by the new `SubjectMetadataController`, also from [`@metamask/snap-controllers`](https://www.npmjs.com/package/@metamask/snap-controllers).
- The permission activity and history log controller has been renamed `PermissionLogController` and has its own top-level state key, but is otherwise functionally equivalent to the existing implementation.
- Migration number 68 has been added to account for the new state changes.
- The tests in `app/scripts/controllers/permissions` have been migrated from `mocha` to `jest`.
Reviewers should focus their attention on the following files:
- `app/scripts/`
- `metamask-controller.js`
- This is where most of the integration work for the new `PermissionController` occurs.
Some functions that were internal to the original controller were moved here.
- `controllers/permissions/`
- `selectors.js`
- These selectors are for `ControllerMessenger` selector subscriptions. The actual subscriptions occur in `metamask-controller.js`. See the `ControllerMessenger` implementation for details.
- `specifications.js`
- The caveat and permission specifications are required by the new `PermissionController`, and are used to specify the `eth_accounts` permission and its JSON-RPC method implementation.
See the `PermissionController` readme for details.
- `migrations/068.js`
- The new state should be cross-referenced with the controllers that manage it.
The accompanying tests should also be thoroughly reviewed.
Some files may appear new but have just moved and/or been renamed:
- `app/scripts/lib/rpc-method-middleware/handlers/request-accounts.js`
- This was previously implemented in `controllers/permissions/permissionsMethodMiddleware.js`.
- `test/mocks/permissions.js`
- A truncated version of `test/mocks/permission-controller.js`.
Co-authored-by: Mark Stacey <markjstacey@gmail.com>
* integration for tx decoding confirmation and history view
* upgrading @truffle/decoder to latest release 5.1.0
* Update acorn and colors patches
* feat: remove redundant styling
* feat: basic integration for nickname components
* feat: wiring functionality of adding new nickname
* feat: wire functionality of showing nickname modal
* feat: link the nickname popover with add/update popover
* feat: moving forward with address nicknames integration
* feat: fixing a bug related to passing chainId in addressBook
* feat: populating memo prop in addressbook entry
* feat: add explorer link
* feat: bug fixing update nickname component
* feat: fix proptypes
* feat: adding tooltip for copying nickname address
* featL fix styling for tx-details page
* feat: optimize code for error handling
* feat: limiting transaction decoding to tx with data
* feat: remove tree UI component
* feat: adding request to check for tx decoding supported networks
* feat: showing data hex component
* feat: fix react warnings
* feat: remove extra margin in tx decoding
* Remove unused package @truffle/source-map-utils
* Ensure messages get translated
* feat: link tx-decoding addresses with nicknames
* Omit value for boolean attributes
* Fix props reading in CopyRawData
* fix: fixing issue with transaltion
* Fix lint errors in TransactionDecoding
- Remove unused import
- Reorder imports
- Address conflict between caught `error` and error state flag by
renaming state flag to `hasError`
- Fix requestUrl identifier casing and use of template string
- Ensure `useEffect` gets passed the deps it needs
- Add scope braces around case statement where it's needed
- Omit literal `true` for boolean jsx attribute
- Refactor nested ternary as `if` statements
* fix: revert fetchWithCache modifications
* Fix linting for TransactionListItemDetails
- Remove unused import
- Fix import spacing
- Remove unused prop dereference
- Fix string interpolation for translated From/To
* Moving to popover pattern
* fix: sass color variable
* Omit value for boolean attribute
* Remove changes from modal.js
* fix: refactor nickname popovers
* Ensure const gets declared before it's used
* Fix linting for ConfirmTransactionBase
- Remove unused prop chainId
- Stop destructuring an unused field
* fix: refactor usage of nicknames popovers in send-content-container
* fix: remove extra prop updateAccountNicknameModal
* fix: refactor code for address.component
* fix: remove extra tooltip
* Ensure NicknamePopovers always returns component
* Fix linting for NicknamePopover component
- Fix useCallback deps
- Switch ternary to logical-or
* Fix linting for SenderToRecipient
... by fixing import order
* Remove unused addressCopied state
* Delete empty file
* fix: remove sender-to-recipient.container
* fix: refactor usage of nickname popovers in confirm-page-container
* fix: bug related to state variable
* Stylelint fix
* Lint fix
* Change "Total Amount" to "Total"
* Lint fix locales
* Update address-book.spec.js
* e2e test update
* Update e2e tests
* Fix issue where absence of function params in data hex tab would result in rendering a string
* Fix border radius, and width and height in small notification windows, of the update-nickname-popover
* Remove fake await
* Clean up
* Clean up
Co-authored-by: Alaa Hadad <alaahd@Alaas-MacBook-M1-Pro-14-inch.local>
Co-authored-by: Dan Miller <danjm.com@gmail.com>
Co-authored-by: g. nicholas d'andrea <gnidan@trufflesuite.com>
* Ignore sentry server errors in e2e tests
* Update test/e2e/webdriver/driver.js
Co-authored-by: Mark Stacey <markjstacey@gmail.com>
Co-authored-by: Dan J Miller <danjm.com@gmail.com>
Co-authored-by: Mark Stacey <markjstacey@gmail.com>
We're bumping from `^6` to `^8`. All imports are now named, and they have been updated. This is a breaking change, in that support for `eth_signTransaction` is added in `^8.0.0`. We do not support this method in our UI, so our middleware stack has been instrumented to reject.
In addition, there are some non-breaking behavioral changes in this version that reviewers should be aware of, see the [7.0.0 release](https://github.com/MetaMask/eth-json-rpc-middleware/releases).
* Add delay to fix flaky account removal e2e test
* Await for element to update instead of awaiting an arbitrary delay
* Update test/e2e/tests/from-import-ui.spec.js
Co-authored-by: Mark Stacey <markjstacey@gmail.com>
* code formatting
* Remove redundant code
Co-authored-by: Mark Stacey <markjstacey@gmail.com>
Co-authored-by: PeterYinusa <peter.yinusa@consensys.net>
* Add notification for ledger live users about how they can switch to WebHID
* Add action button so that users can go right to settings from the what's new popup
* Fix
* Add notification 8 to e2e fixtures
* Lint fix
* Update ledger webhid notification wording
* Update app/_locales/en/messages.json
* Update ui/selectors/selectors.js
This PR adds an e2e test to ensure that the background and UI environments are locked down. It reuses the logic from the `protect-intrinsics.test.js`, and runs in both Chrome and Firefox.
* Turn off all old notifications
* Remove unnecessary attempt to close whats new popup in e2e test
* Remove unneeded whats new popup closes in e2e tests
* Lint fix
* Show test networks toggle button in settings/advanced tab.
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
* Apply toggle testnet settings and show/hide testnets when on/off
Add localhost to testnet.
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
* Lint fixes.
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
* Show add network button
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
* Open full screen when add network is called.
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
* Show custonm rpc before testnet rpcs
lint fixes.
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
* Test cases for network dropdown.
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
* Test cases for toggle test networks in advanced tab component.
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
* Lint fixes.
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
* Fix Locales.
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
* E2E Tests: Custom RPC is now called Add Network
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
* Lint fix
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
* E2E: When Add Network button is clicked, wait for the full screen window to
be visible
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
* findVisibleElement should use a class. i.e start with a dot
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
* Hide Dropdown when Add Netwok is clicked.
Only show full screen if it's not already showing.
E2E tests passing.
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
* Lint fixes
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
* Fix tests for jest
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
* Testnets are not being shown by default anymore, tests should use
Mainnet instead.
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
* Import Button from ui
Change selector name to getShowTestnetworks
Fix button to show full width
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
* Fix e2e tests
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
* Remove localhost from INFURA provider types.
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
* Fix errors in Advanced Tab Component tests
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
* Lint fixes
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
* Fix unit tests for advanced tab component.
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
* Remove deleted elements from e2e tests
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
* Make sure all tests passed.
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
* Lint fixes
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
The fixture server now supports state substitutions. This allows us to
embed dynamic values in our fixtures.
The `custom-token` fixture has been updated to include such a fixture.
The date that the seed phrase reminder was last shown has been updated
to always be the current date, to prevent the reminder from showing up
during e2e tests. This fixes the e2e test failure for the test
"add-hide-token.spec.js" that we've been seeing on CI lately.
The npm scripts used to run Mocha scripts have been greatly simplified.
As we transition more tests from Mocha to Jest it was becoming
increasingly difficult to update the CLI arguments to keep all of these
scripts working correctly. This reorganization should make that process
much simpler.
The base Mocha options are in `.mocharc.js` - all except for the target
tests to run. Those are still given via the CLI. There is a second
config file specifically for the `test:unit:lax` tests (i.e. the Mocha
tests that have no coverage requirements) because it requires a change
to the `ignored` configuration property. We can create an additional
configuration file for each test script we add that needs further
configuration changes.
The `test:unit:path` script used to be used to run Mocha tests at a
given path. Now that can be done using `yarn mocha` instead, so this
script has been removed.
The `yarn watch` command has been broken for some time now, so it has
been removed as well. Mocha tests can still be run with a file watcher
using `yarn mocha --watch <path>` or `yarn test:unit:mocha --watch`.
The README has been updated to remove references about the `watch`
command that was removed. I considered explaining the other test
scripts there as well, but they were difficult to explain I will
attempt to update the README after making further simplifications
instead.
* lavamoat - add lavamoat to webapp background
* test:e2e - add delay to resolve failure
* test:e2e - add delay to resolve failure
* build - add a switch for applying lavamoat, currently off for all
* test/e2e - remove delays added for lavamoat
* Revert "test/e2e - remove delays added for lavamoat"
This reverts commit 79c3479f15c072ed362ba1d4f1af41ea11a17d63.
* Replace hardcoded sent ether label on confirm screen
* replace transaction type SENT_ETHER with network agnostic SENDING_NATIVE_ASSET
* remove sentEther translation base
* make backwards compatible with lingering transaction of legacy sentEther type
* update localalization files
* fixup legacy sentEther transaction type
* changing new transaction type away from localization string
* revert migration tests
* update fixtures and test data
* update name of new transaction type
* add migration
* remove legacy SENT_ETHER from transaction types enum object
There are a few issues encountered when running `yarn setup` on new
Apple Silicon (aka M1, aka arm64) Macs:
* The script halts when attempting to run the install step for
the `chromedriver` package with the message "Only Mac 64 bits
supported". This is somewhat misleading as it seems to indicate that
chromedriver can only be installed on a 64-bit Mac. However, what I
think is happening is that the installation script for `chromedriver`
is not able to detect that an arm64 CPU *is* a 64-bit CPU. After
looking through the `chromedriver` repo, it appears that 87.0.1 is the
first version that adds a proper check ([1]).
Note that upgrading chromedriver caused the Chrome-specific tests to
fail intermittently on CI. I was not able to 100% work out the reason
for this, but ensuring that X (which provides a way for Chrome to run
in a GUI setting from the command line) is available seems to fix
these issues.
* The script also halts when attempting to run the install step for
the `electron` package. This happens because for the version of
`electron` we are using (9.4.2), there is no available binary for
arm64. It appears that Electron 11.x was the first version to support
arm64 Macs ([2]). This is a bit trickier to resolve because we don't
explicitly rely on `electron` — that's brought in by `react-devtools`.
The first version of `react-devtools` that relies on `electron` 11.x
is 4.11.0 ([3]).
[1]: 469dd0a6ee
[2]: https://www.electronjs.org/blog/apple-silicon
[3]: https://github.com/facebook/react/blob/main/packages/react-devtools/CHANGELOG.md#4110-april-9-2021
* Remove button group for non-EIP-1559 networks
* Fix tests...maybe
* Remove unnecessary props, as well as gas display
* Remove unused string
* test progress
* fix test
* fix test
* add customizes gas block to improve e2e pass rate
Co-authored-by: Alex <adonesky@gmail.com>
