We now use the `latest` tag for the phishing warning page, we now use
the version that matches what we have in our manifest. This ensures
that our phishing warning e2e tests match the behaviour of the
production build, and it ensures that breaking changes to the phishing
warning page don't impact users in production.
Environment variables are now considered as higher-precedence than
configuration by our build system. This means that if the same value is
set in `.metamaskrc` and in an environment variable, the environment
variable is what will be used. Previously the reverse was true, the
configuration would take precedence.
It is conventional for CLI tools to consider environment variables as
higher precedence than configuration. This makes our build system less
surprising for most people.
The portfolio URL added in #15407 was meant to be configurable via
environment variable or the `.metamaskrc` file, but that configuration
was broken. Instead the default value was always used.
That configuration has been fixed. The portfolio URL can be set either
by environment variable or configuration file.
Validation has been added to the build script when the "prod" target is
selected. We now ensure that all expected environment variables are
set, and that no extra environment variables are present (which might
indicate that the wrong configuration file is being used).
The `prod` target uses a new `.metamaskprodrc` configuration file. Each
required variable can be specified either via environment variable or
via this config file. CI will continue set these via environment
variable, but for local manual builds we can use the config file to
simplify the build process and ensure consistency.
A new "dist" target has been added to preserve the ability to build a
"production-like" build without this validation.
The config validation is invoked early in the script, in the CLI
argument parsing step, so that it would fail more quickly. Otherwise
we'd have to wait a few minutes longer for the validation to run.
This required some refactoring, moving functions to the utility module
and moving the config to a dedicated module.
Additionally, support has been added for all environment variables to
be set via the config file. Previously the values `PUBNUB_PUB_KEY`,
`PUBNUB_SUB_KEY`, `SENTRY_DSN`, and `SWAPS_USE_DEV_APIS` could only be
set via environment variable. Now, all of these variables can be set
either way.
Closes#15003
There is a SES bug that results in errors being printed to the console
as `{}`[1]. The known workaround is to print the error stack rather
than printing the error directly. This affects our build script when it
is run with LavaMoat.
We used this workaround in one place in the build script already, but
not in the handler for task errors. We now use it in both places.
The workaround has been moved to a function that we can use throughout
the build script.
[1]: https://github.com/endojs/endo/issues/944
We use the `rc` package to read the `.metamaskrc` configuration file,
which is in "ini" format. This package has been replaced by the `ini`
package.
The `rc` package was not actively maintained, and it has had recent
security vulnerabilities. But most importantly, the config object
returned by `rc` includes a bunch of extra information that made build
script validation [1] difficult to implement. Specifically, it made it
challenging to ensure no extra environment variables were present.
The `ini` package on the other hand is simple, well maintained, and
is simpler to use. This package doesn't add any extra properties to the
object it returns, making validation easy.
[1]: https://github.com/MetaMask/metamask-extension/issues/15003
The "scripts" portion of the build script has been refactored to pass
the "build target" throughout the file. The "build target" is the
target environment for the build, reflected by the command used to
start the build (e.g. "dev", "prod", "test", or "testDev").
Beforehand we derived the variables `devMode` and `testing` from this
build target, and passed these throughout the script. However, there is
a future change [1] that requires adding a new build target that acts
like "prod" in some ways but not others. It was easier to refactor to
pass through `buildTarget` directly than it was to add a _third_
boolean flag to indirectly represent the target.
The existence of the "testDev" target made it convenient to still have
the `testing` and `devMode` flag, so helper functions were added to
derive those values from the build target. I anticipate that these will
only be needed temporarily though. We will probably be able to get rid
of the `testDev` target and the related complexities when we start
adding more flags (like `--watch`[2] and `--minify`[3]) to the build
script directly.
[1]: https://github.com/MetaMask/metamask-extension/issues/15003
[2]: https://github.com/MetaMask/metamask-extension/issues/12767
[3]: https://github.com/MetaMask/metamask-extension/issues/12768
* Fix "app-init" injection
The way we were injecting variables into the `app-init.js` bundle was
accidentally overwriting the bundle output with the raw `app-init.js`
source file. This is a problem because the bundling process handles a
lot of things we care about like source maps, polyfills and other
necessary Babel transformations, environment variable injection, and
minification.
Instead of using string replacement to inject variables, we are now
using environment variables. The old string replacement strategy has
been removed, and the `app-init.js` module is now generated using the
same process as our other bundles.
A new option, "extraEnvironmentVariables", was added to allow us to
inject environment variables specifically for this bundle.
* Add check to ensure APPLY_LAVAMOAT is set
This is a follow-up to #15318, which fixed a problem with environment
variables. Every function in this module that passes options related to
environment variables has been updated with a doc comment. This should
make it clearer which options are mandatory and which are optional,
hopefully preventing a similar mistake from happening in the future.
The environment variables `IN_TEST` and `METAMASK_DEBUG` were not
being set to `false` correctly. Instead those variables were being
skipped, and were resolved to `undefined` at runtime. This is confusing
because the other environment variables do not work that way - they can
be set to false.
The build script has been updated to ensure those two environment
variables are always set to `true` or `false` - never `undefined`.
Additionally, the `METAMASK_VERSION` environment variable was being
omitted from the `app-init.js` bundle. For the sake of consistency,
that has also been restored.
Some of the functions in `development/build/scripts.js` have been
renamed to better describe their function, and to be more consistent
with other similar functions.
Two unused options have been removed from the `createNormalBundle`
function in the build script: 'extraEntries` and `modulesToExpose`.'
Both of these options were used in the old "main" bundles, before we
began using the "factored" bundles. They have been unused since #11080.
Currently the build .zip has its time set to the Unix epoch, which
apparently causes problems on certain operating systems when in a
timezone that is behind GMT.
The build timestamp has been changed to MetaMask's birthday. Time
zone adjustments will no longer result in invalid dates.
The build script now uses `yargs` rather than `minimist`. The CLI is
now better documented, and we have additional validation for each
option.
A patch for `yargs` was required because it would blow up on the line
`Error.captureStackTrace`. For some reason when running under LavaMoat,
that property did not exist.
Closes#12766
* origin/develop: (131 commits)
Update `protobufjs` and remove obsolete advisory exclusion (#14841)
Include snap version in pill (#14803)
Update PULL_REQUEST_TEMPLATE.md (#14790)
fix: keystone transaction qrcode has no white spacing (#14798)
Snap notifications integration (#14605)
Upgrade @metamask/eth-ledger-bridge-keyring (#14799)
snaps-skunkworks@0.15.0 (#14772)
Fix proptype errors in network dropdown, tx list item details, and account details modal tests (#14747)
Ensure transaction type is correctly updated on edit (#14721)
Add fiat onboarding for AVAX and MATIC through Wyre (#14683)
Bump @metamask/contract-metadata from 1.33.0 to 1.35.0 (#14791)
Slight cleanup of constants/transactions, useTransactionDisplayData, and TransactionIcon (#14784)
Migrate the "estimateGas" API call to "getFees" for STX (#14767)
Ignore advisory GHSA-wm7h-9275-46v2 (#14789)
Adding flag for MV3 (#14762)
Add types to send state (#14740)
Remove site origin on snap install (#14752)
Update design tokens library from 1.5 to 1.6 WIP (#14732)
Enables the "Safe Transaction From" copy for safeTransferFrom transactions (#14769)
remove draft transaction (#14701)
...
The phishing warning page URL environment variable has been renamed
from `PHISHING_PAGE_URL` to `PHISHING_WARNING_PAGE_URL`. We call this
page the "phishing warning page" everywhere else, and this name seemed
better suited (it's not a phishing page itself).
The variable has been listed and documented in `.metamaskrc.dist` as
well.
The e2e tests have been updated for `@metamask/phishing-warning@1.1.0`.
The iframe case was updated with a new design, which required test
changes. The third test that was meant to ensure the phishing page
can't redirect to an extension page has been updated to navigate
directly to the phishing warning page and setting the URL manually via
query parameters, as that was the only way to test that redirect.
* Create `.zip` files deterministically
Our build system now creates `.zip` archives deterministically.
Previously the `.zip` file would differ between builds even when the
files being archived were identical. This was because the order the
files were passed in was non-deterministic, and the `mtime` for each
file was different between builds.
The files are now sorted before being zipped, and the `mtime` for each
file has been set to the unix epoch.
* Update lavamoat build policy
An externally hosted phishing warning page is now used rather than the
built-in phishing warning page.The phishing page warning URL is set via
configuration file or environment variable. The default URL is either
the expected production URL or `http://localhost:9999/` for e2e testing
environments.
The new external phishing page includes a design change when it is
loaded within an iframe. In that case it now shows a condensed message,
and prompts the user to open the full warning page in a new tab to see
more details or bypass the warning. This is to prevent a clickjacking
attack from safelisting a site without user consent.
The new external phishing page also includes a simple caching service
worker to ensure it continues to work offline (or if our hosting goes
offline), as long as the user has successfully loaded the page at least
once. We also load the page temporarily during the extension startup
process to trigger the service worker installation.
The old phishing page and all related lines have been removed. The
property `web_accessible_resources` has also been removed from the
manifest. The only entry apart from the phishing page was `inpage.js`,
and we don't need that to be web accessible anymore because we inject
the script inline into each page rather than loading the file directly.
New e2e tests have been added to cover more phishing warning page
functionality, including the "safelist" action and the "iframe" case.
* Create `.zip` files deterministically
Our build system now creates `.zip` archives deterministically.
Previously the `.zip` file would differ between builds even when the
files being archived were identical. This was because the order the
files were passed in was non-deterministic, and the `mtime` for each
file was different between builds.
The files are now sorted before being zipped, and the `mtime` for each
file has been set to the unix epoch.
* Update lavamoat build policy
#14583 broke the development build scripts (e.g. `yarn start`) by adding a positional argument to a package script (`build:dev`) that is used and passed positional arguments in the build script itself. This PR removes the positional argument from the `build:dev` script and `yarn start` now works again. In addition, the `--apply-lavamoat` flag is properly forwarded to child processes, which was not the case in the original implementation.
To test, `yarn start` should work and LavaMoat should _not_ be applied, in distinction to `yarn build:dev dev --apply-lavamoat=true`. Whether LavaMoat is applied can be determined by checking whether `Object.isFrozen(Object.prototype)` is `true` (with LavaMoat) or `false` (without LavaMoat).
Adds a new flag, `--apply-lavamoat`, to the main build script. The flag controls whether LavaMoat is actually applied to the output of the build process. The flag defaults to `true`, but we explicitly set it to `false` in the `start` package script. Meanwhile, the `start:lavamoat` script is modified such that it applies LavaMoat to the build output in development mode, but it no longer runs the build process itself under LavaMoat as there aren't very compelling reasons to do so.
This change is motivated by the fact that development builds do not have their own dedicated LavaMoat policies, which causes development builds to fail since #14537. The downside of this change is that LavaMoat-related failures will not be detected when running `yarn start`. @kumavis has plans for fixing this problem in a future major version of the `@lavamoat` suite.
* lavamoat - apply lavamoat protections to popup and notification
* build - enable lavamoat for home
* lavamoat - add missing ui overrides for react family
* deps/patches - patch zxcvbn for ses compat
Certain build steps accidentally omitted the `version` variable. It has
now been restored to all steps, ensuring that all environment variables
are correctly injected into all bundles.
A check has been added to the Sentry setup module to ensure the release
is not omitted in the future.
Certain build steps accidentally omitted the `version` variable. It has
now been restored to all steps, ensuring that all environment variables
are correctly injected into all bundles.
A check has been added to the Sentry setup module to ensure the release
is not omitted in the future.
This commit modifies the build system so that TypeScript files can be
transpiled into ES5 just like JavaScript files.
Note that this commit does NOT change the build system to run TypeScript
files through the TypeScript compiler. In other words, no files will be
type-checked at the build stage, as we expect type-checking to be
handled elsewhere (live, via your editor integration with `tsserver`,
and before a PR is merged, via `yarn lint`). Rather, we merely instruct
Babel to strip TypeScript-specific syntax from any files that have it,
as if those files had been written using JavaScript syntax alone.
Why take this approach? Because it prevents the build process from being
negatively impacted with respect to performance (as TypeScript takes a
significant amount of time to run).
It's worth noting the downside of this approach: because we aren't
running files through TypeScript, but relying on Babel's [TypeScript
transform][1] to identify TypeScript syntax, this transform has to keep
up with any syntax changes that TypeScript adds in the future. In fact
there are a few syntactical forms that Babel already does not recognize.
These forms are rare or are deprecated by TypeScript, so I don't
consider them to be a blocker, but it's worth noting just in case it
comes up later. Also, any settings we place in `tsconfig.json` will be
completely ignored by Babel. Again, this isn't a blocker because there
are some analogs for the most important settings reflected in the
options we can pass to the transform. These and other caveats are
detailed in the [documentation for the transform][2].
[1]: https://babeljs.io/docs/en/babel-plugin-transform-typescript
[2]: https://babeljs.io/docs/en/babel-plugin-transform-typescript#caveats
This commit allows developers to write TypeScript files and lint them
(either via a language server in their editor of choice or through the
`yarn lint` command).
The new TypeScript configuration as well as the updated ESLint
configuration not only includes support for parsing TypeScript files,
but also provides some compatibility between JavaScript and TypeScript.
That is, it makes it possible for a TypeScript file that imports a
JavaScript file or a JavaScript file that imports a TypeScript file to
be linted.
Note that this commit does not integrate TypeScript into the build
system yet, so we cannot start converting files to TypeScript and
pushing them to the repo until that final step is complete.
The version of a build is now derived from both the `version` field in
`package.json` and the requested build type and version. The build type
and version are added onto the manifest version as a suffix, according
to the SemVer prerelease format.
We already have support in the extension for versions of this format,
but to apply a Flask or Beta version required manual updates to
`package.json`. Now it can be done just with build arguments.
A `get-version` module was created to make it easier to generate the
version in the various places we do that during the build. It was
created in the `development/lib` directory because it will be used by
other non-build development scripts in a future PR.
The `BuildType` constant was extracted to its own module as well, and
moved to the `development/lib` directory. This was to make it clear
that it's used by various different development scripts, not just the
build.
We would like to insert TypeScript into the ESLint configuration, and
because of the way that the current config is organized, that is not
easy to do.
Most files are assumed to be files that are suited for running in a
browser context. This isn't correct, as we should expect most files to
work in a Node context instead. This is because all browser-based files
will be run through a transpiler that is able to make use of
Node-specific variables anyway.
There are a couple of important ways we can categories files which our
ESLint config should be capable of handling well:
* Is the file a script or a module? In other words, does the file run
procedurally or is the file intended to be brought into an existing
file?
* If the file is a module, does it use the CommonJS syntax (`require()`)
or does it use the ES syntax (`import`/`export`)?
When we introduce TypeScript, this set of questions will become:
* Is the file a script or a module?
* If the file is a module, is it a JavaScript module or a TypeScript
module?
* If the file is a JavaScript module, does it use the CommonJS syntax
(`require()`) or does it use the ES syntax (`import`/`export`)?
To represent these divisions, this commit removes global rules — so now
all of the rules are kept in `overrides` for explicitness — and sets up
rules for CommonJS- and ES-module-compatible files that intentionally do
not overlap with each other. This way TypeScript (which has its own set
of rules independent from JavaScript and therefore shouldn't overlap
with the other rules either) can be easily added later.
Finally, this commit splits up the ESLint config into separate files and
adds documentation to each section. This way sets of rules which are
connected to a particular plugin (`jsdoc`, `@babel`, etc.) can be easily
understood instead of being obscured.
If an error occurs while running Browserify, the stream that Browserify
creates will emit an `error` event. However, this event is not being
handled, so Node will catch it instead. But the error message it
produces is very nebulous, as it merely spits out the stream object and
completely ignores the actual error that occurred. So this commit
listens for the `error` event and outputs the error.
One note here is that when we are outputting the error, we must get
around a bug that exists in Endo where if you pass an Error object to
`console.{log,error,info,debug}` then you will just see `{}` on-screen.
We get around this by printing `err.stack`.
This PR adds `snaps` under Flask build flags to the extension. This branch is mostly equivalent to the current production version of Flask, excepting some bug fixes and tweaks.
Closes#11626
* added fix for snaps devx issue
* reordered lines
* updated comment
* added test that ensures removeFencedCode detects a file with sourceMap inclusion
* fixed test
* Update development/build/transforms/remove-fenced-code.test.js
Co-authored-by: Erik Marks <25517051+rekmarks@users.noreply.github.com>
ESLint rules have been added to enforce our JSDoc conventions. These
rules were introduced by updating `@metamask/eslint-config` to v9.
Some of the rules have been disabled because the effort to fix all lint
errors was too high. It might be easiest to enable these rules one
directory at a time, or one rule at a time.
Most of the changes in this PR were a result of running
`yarn lint:fix`. There were a handful of manual changes that seemed
obvious and simple to make. Anything beyond that and the rule was left
disabled.
The ESLint config for the extension explicitly includes support for
Prettier. However, this is already being provided by our global ESLint
config (`@metamask/eslint-config`). Therefore there is no need to
include it here. In fact, this is causing weird issues where the `curly`
option is getting overridden somehow. After this change, these syntaxes
are invalid:
``` javascript
if (foo) return;
```
``` javascript
if (foo) return 'bar';
```
* Update support links for Flask
* Disable 'prefer-const' in code fence linting
* Add bespoke home footer for Flask and update logic
* fixup! Add bespoke home footer for Flask and update logic
* Fix code fence lint failure
* Fix support request link in account menu
* Fix unit test failure
The Firefox extension version format does not support the version
format we use (SemVer), so we have to specially format the extension
version to be compatible. The format we chose was
`[major].[minor].[patch].[buildType][buildVersion]`. But when we tried
to submit a build with a version in that format, it was rejected as
invalid for unknown reasons.
The Firefox extension format has been updated to
`[major].[minor].[patch][buildType][buildVersion]`. This seems to pass
validation.
The `version_name` manifest field was being used on Chrome to store the
build type. However, Chrome intended this field to be a full
representation of the version, for display purposes. This was evident
when uploading this version to the Chrome Web Store, because it used
`flask` as the entire version.
Instead the `version_name` field now includes the full SemVer version
string. The version parsing code within the build script and in the
wallet itself have been updated accordingly.
The build script only allowed prerelease versions for the "beta" build
type (e.g. `X.Y.Z-beta.0`). Now it allows Flask prerelease versions as
well.
This is required for the Flask release, where the prerelease version
helps distinguish the Flask error reports and metrics.
The ESLint config has been updated to v8. The breaking changes are:
* The Prettier rule `quoteProps` has been changed from `consistent` to
`as-needed`, meaning that if one key requires quoting, only that key is
quoted rather than all keys.
* The ESLint rule `no-shadow` has been made more strict. It now
prevents globals from being shadowed as well.
Most of these changes were applied with `yarn lint:fix`. Only the
shadowing changes required manual fixing (shadowing variable names were
either replaced with destructuring or renamed).
The dependency `globalThis` was added to the list of dynamic
dependencies in the build system, where it should have been already.
This was causing `depcheck` to fail because the new lint rules required
removing the one place where `globalThis` had been erroneously imported
previously.
A rule requiring a newline between multiline blocks and expressions has
been disabled temporarily to make this PR smaller and to avoid
introducing conflicts with other PRs.
`remote-redux-devtools` is now explicitly excluded and disabled in non-
dev builds, and in the `testDev` build. This was causing console errors
in the `testDev` build during e2e tests, which would cause certain
tests to fail.
This was already only supposed to be enabled for development builds,
but this library used the `NODE_ENV` environment variable to make that
determination. This gives us more control over when it's disabled.
The React dev tools can result in console errors if dev tools is not
open during the test. Some of our e2e tests fail if there are any
console errors, so these errors break those tests.
`react-devtools` has been completely disabled for `testDev` builds to
make debugging e2e tests easier. The React dev tools can still be used
from development builds.
A propType error was showing up during e2e tests with a `testDev`
build. It was caused by `process.env.IN_TEST` being treated as a
boolean, when in fact it is either the string `'true'` or a boolean.
`IN_TEST` has been updated to always be a boolean. `loose-envify` has
no trouble injecting boolean values, so there's no reason to treat this
as a string.
The LavaMoat policy generation script would sporadically fail because
it ran the build concurrently three times, and the build includes
steps that delete the `dist` directory and write to it. So if one build
process tried to write to the directory after another deleted it, it
would fail.
This was solved by adding a new `--policy-only` flag to the build
script, and a new `scripts:prod` task. The `scripts:prod` task only
runs the script tasks for prod, rather than the entire build process.
The `--policy-only` flag stops the script tasks once the policy has
been written, and stops any other files from being written to disk.
This prevents the three concurrent build processes from getting in each
others way, and it dramatically speeds up the process.
The environment variables used for test builds was wrong for certain
bundles because the `testing` flag wasn't passed through to the
function that determines which environment variables to inject.
Effectively this means that test builds on `master` were going to the
production `metamask` Sentry project rather than the `test-metamask`
project. This has been the case since #11080.
The `testing` flag is now included for all bundles, and test builds now
use the `test-metamask` Sentry project in all cases.
This PR improves the error handling of the code fence removal transform stream by catching errors thrown by the `removeFencedCode` function and passing them to the `end` callback. This appears to resolve a problem where watched builds would blow up whenever a file with fences was reloaded.
This PR adds one LavaMoat background script policy or each build type. It also renames the build system policy directory from `node` to `build-system` to make its purpose more clear. Each build type has the original `policy-override.json` for `main` builds. The `.prettierignore` file has been updated to match the locations of the new auto-generated policy files.
We need to maintain separate policies for each build type because each type will produce different bundles with different internal and external modules.
Co-authored-by: Mark Stacey <markjstacey@gmail.com>
The build system now supports platform-specific modifications to the
manifest for each build type. The need to customize the `id` on Firefox
motivated this change.
To support this, a new directory was made in each build type directory
for manifest changes. The images currently in this directory were moved
into an `images` subdirectory.
This new `manifest` directory can include each manifest file currently
in `app/manifest`. The `_base.json` file is assumed to exist, but the
platform manifest modifications are optional.
This PR enables the exclusion of JavaScript and JSON source by `buildType`, and enables the running of `eslint` under LavaMoat. 80-90% of the changes in this PR are `.patch` files and LavaMoat policy additions.
The file exclusion is designed to work in conjunction with our code fencing. If you forget to fence an import statement of an excluded file, the application will now error on boot. **This PR commits us to a particular naming convention for files intended only for certain builds.** Continue reading for details.
### Code Fencing and ESLint
When a file is modified by the code fencing transform, we run ESLint on it to ensure that we fail early for syntax-related issues. This PR adds the first code fences that will be actually be removed in production builds. As a consequence, this was also the first time we attempted to run ESLint under LavaMoat. Making that work required a lot of manual labor because of ESLint's use of dynamic imports, but the manual changes necessary were ultimately quite minor.
### File Exclusion
For all builds, any file in `app/`, `shared/` or `ui/` in a sub-directory matching `**/${otherBuildType}/**` (where `otherBuildType` is any build type except `main`) will be added to the list of excluded files, regardless of its file extension. For example, if we want to add one or more pages to the UI settings in Flask, we'd create the folder `ui/pages/settings/flask`, add any necessary files or sub-folders there, and fence the import statements for anything in that folder. If we wanted the same thing for Beta, we would name the directory `ui/pages/settings/beta`.
As it happens, we already organize some of our source files in this way, namely the logo JSON for Beta and Flask builds. See `ui/helpers/utils/build-types.js` to see how this works in practice.
Because the list of ignored filed is only passed to `browserify.exclude()`, any files not bundled by `browserify` will be ignored. For our purposes, this is mostly relevant for `.scss`. Since we don't have anything like code fencing for SCSS, we'll have to consider how to handle our styles separately.
The code fence transform was including contents after the final END directive twice. That was not covered by the tests, because none of the examples contained any content after the final END directive, and concatenating the empty string twice does not produce an observable difference in the test results.
This bug was due to an off-by-one error in the loop of the multiSplice function. The error has been fixed, and more test cases have been added.
Static files have been added for the Flask build. This includes logos
of each size and variety that we use, and it includes the 3D model JSON
file.
Closes#12427
The production build was accidentally broken in #12440 because of a
merge conflict with a #12441 that wasn't initially noticed. The
conflict was the renaming of the `BuildTypes` variable to `BuildType`.
This variable is used to check the current build type, but only for
production builds. `BuildTypes` is `undefined`, so this would result in
a crash when that enum was used.
The build script has been updated to embed the correct Infura project
ID and Segment write key for beta and Flask builds. These are set via
environment variable or config file. They have already been added in CI
as environment variables.
The Segment production write key has also been moved into the set of
environment variables that can be set in the configuration file. This
was to make the way we reference it more consistent.
The new project IDs and keys are only used in the "production"
environment, which right now is the merge step into the `master`
branch. This is appropriate for Flask, but it doesn't match our plan
for how the beta release would get created. In a future PR, when the
beta release automation work is completed, the conditions for when
the beta secrets are used should be updated to ensure they're used only
for the beta builds.
Closes#11896
Recently validation was added for our build configuration as part of
the PR #12438. This had the unintended consequence of making all builds
from forks fail because they don't get secrets injected. Specifically
it was the missing `INFURA_PROJECT_ID` that made the builds fail.
The Infura project ID is no longer required for building. In practice
it's still required for doing anything with a build but running e2e
tests, but that's all we need to do in CI anyway.
The build type (i.e. the distribution) is now included in the Sentry
environment during setup, for all builds except the "main" build. This
will allow us to track Flask and beta errors separately from other
errors.
A constant was created for the build types. The equivalent constant in
our build scripts was updated to match it more closely, for
consistency. We can't use the same constant in both places because our
shared constants are in modules that use ES6 exports, and our build
script does not yet support ES6 exports.
The singular `BuildType` was used rather than `BuildTypes` to match our
naming conventions elsewhere for enums. We name them like classes or
types, rather than like a collection.
Relates to #11896
We now use two separate Infura project IDs for production builds, and
for all other builds. Previously all CI builds used the production
Infura project ID. Separating them will make our Infura dashboard
metrics more representative of real production usage.
The new environment variable for production has been setup in CI
already, but the old environment variable will remain set to the
production project ID until this commit is included in a release.
We can't switch the old environment variable out until we're confident
that it won't get used for a production build.
We now use constants for the various different build environments. This
was done to improve the JSDoc types of the `getInfuraProjectId` helper
method.
The `getConfigValue` function was added to make it easier to validate
that required config values are set. This should ensure builds fail
early with an informative error message when they are missing the
necessary configuration.
The main `version` field in `package.json` will now include the beta
version (if present) rather than it being passed in via the CLI when
building. The `version` field is now a fully SemVer-compatible version,
with the added restriction that any prerelease portion of the version
must match the format `<build type>.<build version>`.
This brings the build in-line with the future release process we will
be using for the beta version. The plan is for each future release to
enter a "beta phase" where the version would get updated to reflect
that it's a beta, and we would increment this beta version over time as
we update the beta. The manifest gives us a place to store this beta
version. It was also important to replace the automatic minor bump
logic that was being used previously, because the version in beta might
not be a minor bump.
Additionally, the filename logic used for beta builds was updated to
be generic across all build types rather than beta-specific. This will
be useful for Flask builds in the future.
* lavamoat - add lavamoat to webapp background
* test:e2e - add delay to resolve failure
* test:e2e - add delay to resolve failure
* build - add a switch for applying lavamoat, currently off for all
* test/e2e - remove delays added for lavamoat
* Revert "test/e2e - remove delays added for lavamoat"
This reverts commit 79c3479f15c072ed362ba1d4f1af41ea11a17d63.
* lockdown - breakout making globalThis properties non-writable into lockdown-more.js
* Update app/scripts/lockdown-more.js
Co-authored-by: David Walsh <davidwalsh83@gmail.com>
* Update app/scripts/lockdown-more.js
Co-authored-by: Erik Marks <25517051+rekmarks@users.noreply.github.com>
Co-authored-by: David Walsh <davidwalsh83@gmail.com>
Co-authored-by: Erik Marks <25517051+rekmarks@users.noreply.github.com>
The MetaMask logo used for beta development builds was wrong. The lock
screen (and any other place using the `@metamask/logo` logo) showed the
correct logo, but all of our static assets used the "regular" logo.
Now the beta logo should be used everywhere for beta development
builds.
This is a refactor to replace the `isBeta` boolean with `buildType`
throughout the build system. This will allow us to modify the behaviour
of each step of the build process for Flask as well.
This should result in no functional changes.
This PR adds build-time code exclusion by means of code fencing. For details, please see the README in `./development/build/transforms`. Note that linting of transformed files as a form of validation is added in a follow-up, #12075.
Hopefully exhaustive tests are added to ensure that the transform works according to its specification. Since these tests are Node-only, they required their own Jest config. The recommended way to work with multiple Jest configs is using the `projects` field in the Jest config, however [that feature breaks coverage collection](https://github.com/facebook/jest/issues/9628). That being the case, I had to set up two separate Jest configs. In order to get both test suites to run in parallel, Jest is now invoked via a script, `./test/run-jest.sh`.
By way of example, this build system feature allows us to add fences like this:
```javascript
this.store.updateStructure({
...,
GasFeeController: this.gasFeeController,
TokenListController: this.tokenListController,
///: BEGIN:ONLY_INCLUDE_IN(beta)
PluginController: this.pluginController,
///: END:ONLY_INCLUDE_IN
});
```
Which at build time are transformed to the following if the build type is not `beta`:
```javascript
this.store.updateStructure({
...,
GasFeeController: this.gasFeeController,
TokenListController: this.tokenListController,
});
```
Co-authored-by: Mark Stacey <markjstacey@gmail.com>
