The account options menu is now much faster, and it correctly closes
when 'Switch account' is selected.
A static width had to be set on the menu so that it could be positioned
reliably. Without this width set, it was rendered as a different size
before positioning than after, which resulted in it being positioned
incorrectly. A `z-index` had to be added (equal to the `z-index` used
by the popover component) to ensure it wasn't rendered beneath the
popover.
The menu is automatically positioned relative to the account options
button, appearing below the button by default but above it instead if
there isn't room below. It is positioned to be inside the bounds of the
popover as well.
The account options button is now a `<button>` rather than a `<i>`.
This required a few additional style rules to overrule the default
button styles. Additionally the size was increased so that it matches
the designs more closely.
The callbacks for connecting, disconnecting, and switching accounts
have been updated to use state and props to determine the correct
address to use, rather than being bound to the correct address
parameter in the render function. This means we aren't creating a new
function upon each render anymore.
The `showAccountOptions` method still needs to be bound once per
account, but this was switched to use more readable syntax (`.bind`,
instead of the double arrow function).
`react-popper` and `@popperjs/core` were both added as dependencies.
These should be used for any UI requiring relative positioning (e.g.
tooltips, menus, etc.). Older versions of these libraries are already
in our codebase as transitive dependencies of the tooltip library we're
using.
The asset list has been updated to more closely match the new designs.
There are still a few major differences (e.g. the selection state, the
token menu) that can't be implemented until the asset screen has been
implemented.
The background color of the selected asset has been lightened, so that
it's less jarring until we remove it.
The tabs on the Home page have been updated to match the new home
screen designs.
A new `activeClassName` prop was added to the `Tab` component to allow
applying different styles to the active tab state.
I ran into specificity problems when overriding the default `Tab` styles
because the import order of our CSS is bizarre and wrong. For now I've
used a crude workaround, but we can fix this properly later by changing
the import order to place styles likely to be overridden first.
All asset list items now use the same component (`AssetListItem`).
Previously the tokens and the Ethereum balance were totally separate
components, despite being styled similarly.
Various unnecessary DOM elements and style rules were removed, but the
overall list looks identical to how it looked before.
The `.scss` file extension is not required when importing SCSS files.
It has been removed from all imports, for consistency. I chose to
remove it rather than add it everywhere because imports without the
extension seem to be more common.
The CSS class for the fallback Ethereum logo used in the identicon
component was with the `AssetList` styles, and was confusingly named
`balance-icon`. It has been migrated to the identicon styles, and
renamed `identicon__eth-logo`.
A few redundant rules have been removed as well (they were always
overridden by inline styles).
Add alert suggesting that the user switch to a connected account. This
alert is displayed when the popup is opened over an active tab that is
connected to some account, but not the current selected account. The
user can choose to switch to a connected account, or dismiss the alert.
This alert is only shown once per account switch. So if the user
repeatedly opens the popup on a dapp without switching accounts, it'll
only be shown the first time. The alert also won't be shown if the user
has just dismissed an "Unconnected account" alert on this same dapp
and account, as that would be redundant.
The alert has a "Don't show me this again" checkbox that allows the
user to disable the alert. It can be re-enabled again on the Alerts
settings page.
This component was indended to show both ETH/fiat and token balance,
but today is not used for token balance. As a result, large pieces of
this component and many props were unused in practice. The condition
about `formattedBalance` returning a falsy or `None` or `...` result
was also removed, as that doesn't seem to be possible.
The `balanceValue` passed into the `Balance` component in the asset
list has also been removed, as it isn't used.
The unconnected account alert can now be disabled. A "don't show this
again" checkbox has been added to the alert, which prevents that alert
from being shown in the future.
An alert settings page has been added to the settings as well. This
page allows the user to disable or enable any alert.
The hover state background color of the "Account" in the popup home
screen menu bar has been updated to match the hover state background
color of the connected status indicator. Both hover state backgrounds
now match.
The checkbox color was sometimes incorrect after it was checked. I'm
not sure how to consistently reproduce this issue, but I was able to
make this happen most of the time if I clicked the checkbox while some
text was highlighted.
It seems that the `:checked` and `:indeterminate` pseudo-selectors were
not being applied right away for some reason. Either that or React
wasn't setting the `checked` state of the `input` element right away.
This problem has been worked around by using CSS classes instead of
pseudo-selectors. I am no longer able to reproduce the issue now.
This new dropdown component uses a native `select` element, thus
avoiding various issues encountered in attempting to reuse our existing
dropdown components for the new permission system alert modal.
The prefixed forms of `appearance` have been added temporarily so that
the component can be used in Storybook, as our Storybook config isn't
setup to do autoprefixing yet. Our real build system does handle
autoprefixing for this rule correctly already.
Resolves three different style issues due to overflow of content
and addresses an issue where UI was being squished due to available
screen real estate.
- On the choose account modal, when a user has enough accounts to need
to scroll within the account chooser, the last-connected data column
was squished. This is resolved by using a tooltip and icon for this data
rather than text printed in column.
- On the connection permission result screen where it shows the Dapp icon ->
Metamask icon, the bottom of the logos and dropshadows were being cut off
this was resolved by removing the height set on this element and allowing
it to fill the available space.
- On the confirmation screen the content appeared off center due to the scrollbar being overlayed instead of auto. This was resolved by removing some of the setting of manual overflow controls on the body element.
* Remove `estimatedGas` property from `txMeta`
The `estimatedGas` property was a cache of the gas value estimated for
a transaction when the default gas limit was set. This property wasn't
used anywhere. It may have been useful for debugging purposes, but the
same gas estimate is already stored on the `history` property so it
should be present in state logs regardless.
* Remove `gasLimitSpecified` txMeta property
The `gasLimitSpecified` property of `txMeta` wasn't used for anything.
It might have been useful for debugging purposes, but whether or not
the gas limit was specified can also be determined from looking at the
transaction history, so it's not a huge loss.
* Remove `gasPriceSpecified` txMeta property
The `gasPriceSpecified` property of `txMeta` wasn't used for anything.
It might have been useful for debugging purposes, but whether or not
the gas price was specified can also be determined from looking at the
transaction history, so it's not a huge loss.
* Remove `simpleSend` txMeta property
The `simpleSend` property of `txMeta` was used to ensure a buffer was
not added to the gas limit during gas estimation for simple send
transactions. It was made redundant by #8484, which accomplishes this
without the use of this property.
An alert is now shown when the user switches from an account that is
connected to the active tab to an account that is not connected. The
alert prompts the user to dismiss the alert or connect the account
they're switching to.
The "loading" state is handled by disabling the buttons, and the error
state is handled by displaying a generic error message and disabling
the connect button.
The new reducer for this alert has been created with `createSlice` from
the Redux Toolkit. This utility is recommended by the Redux team, and
represents a new style of writing reducers that I hope we will use more
in the future (or at least something similar). `createSlice` constructs
a reducer, actions, and action creators automatically. The reducer is
constructed using their `createReducer` helper, which uses Immer to
allow directly mutating the state in the reducer but exposing these
changes as immutable.
`addToAddressBook` returned a thunk that didn't return a Promise,
despite doing async work. It now returns a Promise.
The callers of this action creator were updated to `await` the
completion of the operation. It was called just before redirecting the
user to a different page or closing a modal, and it seemed appropriate
to wait before doing those things.
The `shift-list-item` component for displaying ShapeShift transactions
has been removed, along with three other components that were used
solely by that component (`copyButton`, `eth-balance`, and
`fiat-value`).
This component hasn't been used in some time, as ShapeShift
transactions no longer exist to display. The controller that ShapeShift
transactions originated from was removed in #8118, and it became
impossible to create new ShapeShift transactions from within MetaMask
in #6746
This state hasn't been used since #5886. The nonce we display in our UI
is now from the background, rather than queried directly from the
front-end.
This also means we save making this network call each time a pending
transaction is added, and each time the transaction list is mounted.
* Add popover for informing user about the connected status indicator
* Ensure user only sees connected status info popover once
* Default connectedStatusPopoverHasBeenShown to true and set it to false in a migration
* Add unit test for migration 42
* Initialize AppStateController if it does not exist in migration 42
* Update connect indicator popup locale text
* Code cleanup for connected-indicator-info-popup
* Code cleanup for connected-indicator-info-popup
The prop passed into the SignatureRequestHeader was changed from
`selectedAccount` to `fromAccount` in #8079, but the header component
itself was never updated to use the new prop name.
The header component for the new Signature Request screen has an
undeclared variable called `name` in it. This was present in the
original implementation of this component in #6891. It's unclear what
this was supposed to be, and it doesn't seem to reference anything that
exists.
This new checkbox component uses a plain `input` component internally,
so the browser treats it like a native checkbox. It is styled by hiding
the native checkbox and replacing it with Font Awesome icons (the same
that we are using in Figma).
Support for a 'disabled' state and an indeterminate state has been
added as well. The `onClick` prop has been made optional, as it may not
be required if the parent component is intercepting the click instead.
The `regular` Font Awesome font style needed to be added so that we
could use the `far fa-square` icon for the unchecked checkbox.
