* Fix and test log.info calls run for each migration
In migrator/index.js, log.info is called before an after each migration.
These calls are intended to produce breadcrumbs to be captured by sentry
in cases where errors happen during or shortly after migrations are run.
These calls were not causing any output to the console because the log.setLevel
calls in ui/index.js were setting a 'warn value in local storage that was being
used by logLevel in the background.
This commit fixes the problem by setting the `persist` param of setLevel to
false, so that the background no longer reads the ui's log level.
Tests are added to verify that these logs are captured in sentry breadcrumbs
when there is a migration error due to an invariant state.
* Improve breadcrumb message matching
The test modified in this commit asserts eqaulity of messages from breadcrumbs
and hard coded expected results. This could cause failures, as sometimes the
messages contain whitespace characters. This commit ensures the assertions only
check that the expected string is within the message string, ignoring extra
characters.
* Improve Sentry state pre-initialization
Previously the masked state snapshot sent to Sentry would be blank for
errors that occured during initialization. Instead we'll now include
some basic information in all cases, and a masked copy of the persisted
state if it happens after the first time the persisted state is read.
* Add test
* Fix crash when persisted state not yet fetched
* Add descriptions for initial state hooks
* Update comments to reflect recent changes
* Re-order imports to follow conventions
* Move initial state hooks back to module-level
The initial state hooks are now setup at the top-level of their module.
This ensures that they're setup prior to later imports. Calling a
function to setup these hooks in the entrypoint module wouldn't
accomplish this even if it was run "before" the imports because ES6
imports always get hoisted to the top of the file.
The `localStore` instance wasn't available statically, so a new state
hook was introduced for retrieving the most recent retrieved persisted
state.
* Fix error e2e tests
The state mask used to anonymize the Sentry state snapshots has been
split into UI and background masks. This was done to simplify later
refactors. There should be no functional changes.
* Reorganize Sentry error e2e tests
The tests have been reorganized into different describe blocks. Each
describe block is for either before or after initialization, and either
with or without opting into metrics.
This was done to simplify later test additions. The conditions for each
test are now in the describe block, letting us test additional things
in each of these conditions. The conditions were flattened to a single
level to avoid excessive indentation.
* Add error e2e test for background and UI errors
The Sentry e2e tests before initialization only tested background
errors, and the after initialization tests only tested UI errors. Now
both types of errors are tested in both scenarios.
* Add error e2e tests for Sentry error state
E2E tests have been added to test the state object sent along with each
Sentry error.
At the moment this object is empty in some circumstances, but this will
change in later PRs.
* Rename throw test error function
* Only setup debug/test state hooks in dev/test builds
The state hooks used for debugging and testing are now only included in
dev or test builds. The function name was updated and given a JSDoc
description to explain this more clearly as well.
* Add state snapshot assertions
State snapshot assertions have been added to the e2e error tests. These
snapshots will be very useful in reviewing a few PRs that will follow
this one.
We might decide to remove these snapshots after this set of Sentry
refactors, as they might be more work to maintain than they're worth.
But they will be useful at least in the short-term.
The login step has been removed from a few tests because it introduced
indeterminacy (the login process continued asynchronously after the
login, and sometimes was not finished when the error was triggered).
* Ensure login page has rendered during setup
This fixes an intermittent failure on Firefox
* Format snapshots with prettier before writing them
* Use defined set of date fields rather than infering from name
* Remove waits for error screen
The error screen only appears after a long timeout, and it doesn't
affect the next test steps at all.
* Rename `provider` to `providerConfig`
The network controller `provider` state has been renamed to
`providerConfig`. This better reflects what this state is, and makes
this controller more closely aligned with the core network controller.
All references to the provider configuration have been updated to
prefer `providerConfig` over `provider`, to make the distinction clear
between a provider and provider config.
Closes#18902
* Add migration
* feat: add yaml feature management
Add yaml feature file per build type.
Also add method to parse yaml and set
enabled features env to true. The build
process will then replace any process.env[feature]
that exists on the config by its value
* chore: add example for desktop
* Added initial draft of build features
* [TMP] Sync between computers
* Is able to succesfully build stable extension with snaps feature
* Removing var context from builds.yml
* Add asssets to builds.yml
* Minor bug fixes and removing debug logs
* [WIP] Test changes
* Removed TODOs
* Fix regession bug
Also
* remove debug logs
* merge Variables.set and Variables.setMany with an overload
* Fix build, lint and a bunch of issues
* Update LavaMoat policies
* Re-add desktop build type
* Fix some tests
* Fix desktop build
* Define some env variables used by MV3
* Fix lint
* Fix remove-fenced-code tests
* Fix README typo
* Move new code
* Fix missing asset copy
* Move Jest env setup
* Fix path for test after rebase
* Fix code fences
* Fix fencing and LavaMoat policies
* Fix MMI code-fencing after rebase
* Fix MMI code fencing after merge
* Fix more MMI code fencing
---------
Co-authored-by: cryptotavares <joao.tavares@consensys.net>
Co-authored-by: Frederik Bolding <frederik.bolding@gmail.com>
Co-authored-by: Brad Decker <bhdecker84@gmail.com>
The `network` store of the network controller crams two types of data
into one place. It roughly tracks whether we have enough information to
make requests to the network and whether the network is capable of
receiving requests, but it also stores the ID of the network (as
obtained via `net_version`).
Generally we shouldn't be using the network ID for anything, as it has
been completely replaced by chain ID, which all custom RPC endpoints
have been required to support for over a year now. However, as the
network ID is used in various places within the extension codebase,
removing it entirely would be a non-trivial effort. So, minimally, this
commit splits `network` into two stores: `networkId` and
`networkStatus`. But it also expands the concept of network status.
Previously, the network was in one of two states: "loading" and
"not-loading". But now it can be in one of four states:
- `available`: The network is able to receive and respond to requests.
- `unavailable`: The network is not able to receive and respond to
requests for unknown reasons.
- `blocked`: The network is actively blocking requests based on the
user's geolocation. (This is specific to Infura.)
- `unknown`: We don't know whether the network can receive and respond
to requests, either because we haven't checked or we tried to check
and were unsuccessful.
This commit also changes how the network status is determined —
specifically, how many requests are used to determine that status, when
they occur, and whether they are awaited. Previously, the network
controller would make 2 to 3 requests during the course of running
`lookupNetwork`.
* First, if it was an Infura network, it would make a request for
`eth_blockNumber` to determine whether Infura was blocking requests or
not, then emit an appropriate event. This operation was not awaited.
* Then, regardless of the network, it would fetch the network ID via
`net_version`. This operation was awaited.
* Finally, regardless of the network, it would fetch the latest block
via `eth_getBlockByNumber`, then use the result to determine whether
the network supported EIP-1559. This operation was awaited.
Now:
* One fewer request is made, specifically `eth_blockNumber`, as we don't
need to make an extra request to determine whether Infura is blocking
requests; we can reuse `eth_getBlockByNumber`;
* All requests are awaited, which makes `lookupNetwork` run fully
in-band instead of partially out-of-band; and
* Both requests for `net_version` and `eth_getBlockByNumber` are
performed in parallel to make `lookupNetwork` run slightly faster.
* feat: add desktop enable button component
This component will be added
to the experimental page. Users
will then be able to initialize
a desktop connection
* feat: add desktop pairing page
* feat: add desktop deep-linking shared lib
* test: add initial entries to render helper
Allow specifying initialEntries for
MemoryRouter. This change will allow
testing pages that use the useParam
hook.
* feat: add desktop error page
Error page for any desktop pairing
related issue
* feat: add desktop routes to route component
* feat: add enable desktop button to experimental tab
* feat: add desktop icon when paired in dev mode
* feat: disable ledger live control when desktop enabled
* feat: register desktop error actions on ui init
* fix: add missing code fencing
* chore: remove enable desktop rpc middleware
Now that we are adding the UI
there's no need for this rpc middleware
(as it was used to test desktop background
code)
* fix: display experimental tab for desktop
A patch made in #15672 was found to be unnecessary. Instead of setting
a `rootGlobals` object upon construction of the root compartment, we
are now creating a `sentryHooks` object in the initial top-level
compartment. I hadn't realized at the time that the root compartment
would inherit all properties of the initial compartment `globalThis`.
This accomplishes the same goals as #15672 except without needing a
patch.
Our Sentry setup relies upon application state, but it wasn't able to
access it in LavaMoat builds because it's running in a separate
Compartment.
A patch has been introduced to the LavaMoat runtime to allow the root
Compartment to mutate the `rootGlobals` object, which is accessible
from outside the compartment as well. This lets us expose application
state to our Sentry integration.
* Don't send errors to sentry if users have not opted-in to participate in metametrics
* Don't capture opt-out metrics
* Move the metrics-opt in screen to immediately after the welcome screen
* Ensure that global.getSentryState is set in the background
* Fix e2e tests after rearranging onboardin flow
* Fix unit tests
* More e2e test fixes
* Remove unnecessary wrappers around capture exception
* When background port closes, UI should display a user friendly error.
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
Remove console.log
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
A couple of fixes
1. Use timeout in metaRPCClientFactory to check if UI can't
communicate with bg
2. Refactor locale setup
3. Fixed wording/capitalization
4. Fix locales usage so that linting works
5. Refactor CSS
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
do not simulate errorwq
Refactor loading css
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
Remove the onDisconnect event handler in ui as this is handled in
metarpcclientfactory
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
Do not throw in bg
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
Fix PR comments
Remove unused message 'failedToLoadMessage'
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
Move usage of locales to shared/** so that linter can see it.
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
Do not simulate error.
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
metarpc can handle multiple requests, responseHandled should be a map.
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
reload metamask button on critical error
Use metamask state (if available) to the locale, else read locale files
manually.
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
use constant and numeric separator
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
refactor error utils
remove error simulation
Memoize setupLocale function
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
test cases
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
Do not simulate error
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
1. store should be metamask state
2. code refactorings.
Tests: mock setupLocale
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
Mock fetchLocale instead
Test setup locale
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
UI/CSS changes.
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
Do not simulate failure
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
* spell MetaMask correctly
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
* Rename state to mockStore
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
* we should clean up this.responseHandled[id] in the error case.
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
* Fixed PR comments.
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
* clean up response handled.
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
* Remove network config store
* Remove inline networks variable in network controller
* Re-key network controller 'rpcTarget' to 'rpcUrl'
* Require chainId in lookupNetwork, implement eth_chainId
* Require chain ID in network form
* Add alert, migrations, and tests
* Add chainId validation to addToFrequentRpcList
* Update public config state selector to match new network controller
state
* Use network enums in networks-tab.constants
* Ensure chainId in provider config is current
* Update tests
The state snapshot that was attached to Sentry errors was removed
recently in #8794 because it had become too large. The snapshot has
now been restored and reduced in size.
A utility function has been written to reduce the state object to just
the requested properties. This seemed safer than filtering out state
that is known to be large or to contain identifiable information.
This is not a great solution, as now knowledge about the state shape
resides in this large constant, but it will suffice for now. I am
hopeful that we can decorate our controllers with this metadata in the
future instead, as part of the upcoming background controller refactor.
A separate `getSentryState` global function has been added to get the
reduced state, so that the old `getCleanAppState` function that we used
to use could remain unchanged. It's still useful to get that full state
copy while debugging, and in e2e tests.
We were including the polyfill for the `Intl.RelativeTimeFormat` API,
but we weren't including any locale data. This polyfill doesn't work
without the locale data for whichever locale you're formatting.
The data for all locales we support is now included. The locale data
is loaded from disk as-needed (during app startup, and upon each change
in locale).
* update connected accounts appearance
* consolidate account alerts
* UnconnectedAccountAlert: use ConnectedAccountsList
* move switch account action out of menu in all views
Co-authored-by: Mark Stacey <markjstacey@gmail.com>
Add alert suggesting that the user switch to a connected account. This
alert is displayed when the popup is opened over an active tab that is
connected to some account, but not the current selected account. The
user can choose to switch to a connected account, or dismiss the alert.
This alert is only shown once per account switch. So if the user
repeatedly opens the popup on a dapp without switching accounts, it'll
only be shown the first time. The alert also won't be shown if the user
has just dismissed an "Unconnected account" alert on this same dapp
and account, as that would be redundant.
The alert has a "Don't show me this again" checkbox that allows the
user to disable the alert. It can be re-enabled again on the Alerts
settings page.
Changes to the background state were being detected in the `update`
event handler in `ui/index.js` that receives state updates from the
background. However this doesn't catch every update; some state
changes are received by the UI in-between these `update` events.
The background `getState` function is callable directly from the UI,
and many action creators call it via `forceUpdateMetamaskState` to
update the `metamask` state immediately without waiting for the next
`update` event. These state updates skip this change detection in
`ui/index.js`.
For example, if a 3Box state restoration resulted in a `currentLocale`
change, and then a `forceUpdateMetamaskState` call completed before the
next `update `event was received, then `updateCurrentLocale` wouldn't
be called, and the `locale` store would not be updated correctly with
the localized messages for the new locale.
We now check for background state changes in the `updateMetamaskState`
action creator. All `metamask` state updates go through this function,
so we aren't missing any changes anymore.
Implement `eth_decrypt` and `eth_getEncryptionPublicKey`. This allows decryption backed by the user's private key. The message decryption uses a confirmation flow similar to the messaging signing flow, where the message to be decrypted is also able to be decrypted inline for the user to read directly before confirming.
