The `data-test-id` prop has been added to `TextField`. This prop allows
selecting this component more easily from e2e and unit tests. This is
required for a subsequent PR that includes a text field that cannot be
selected for by placeholder or contents or label (any of which would
have been preferable).
* Changed registryUrl for snaps only in firefox
Fixed getPlatform to only be imported into metamask-controller in flask
Removed snaps specific testrunner script and use run-all with a cli option
* Fixed flakey tests
* Removed unneeded await
* Added delay
* Fixed linting
* Fix permission site origin overflow
* Standardize connect flow a bit
* Another standardization change
* Fix another chip width issue
* Standardize snap install
* Fix lint
* Fix overflow after rebase
* make use of getTokenStandardAndDetails method exposed on assetsContractController to determine how to represent the contract being interacted with in token contract method calls
* adding new message while converting token to nft if the nft is already added via nft flow.
* updating the copy
Co-authored-by: Alex Donesky <adonesky@gmail.com>
Co-authored-by: Alex Donesky <adonesky@gmail.com>
After landing on Swap, a disclaimer of Smart Transactions appear, and an error on devTools shows the following: “invalid prop ‘type’ of value ‘ul’” supplied to ‘Typography’
After enabling Smart Transactions, an error on devTools shows the following: “invalid prop ‘smartTransactionsOptInSatus’ of type ‘boolean supplied to ‘SlippageButtons’
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
* Add design-tokens and apply colors to button
* swap more colors
* tweak button and add dark theme switch to storybook
* tweak buttons
* fix typo
* remove comments
* add dep to ignored list
* fix linting issue
* fix linting issues
* Updating some styles and removing some deprecated buttons (#13742)
* Updating some styles and removing some deprecated buttons
* Warning button fixes
* Fixing warning text for darkmode
* bump design tokens and update storybook theme strategy
Co-authored-by: George Marshall <george.marshall@consensys.net>
* Fix: Insufficient number of substitutions for key "stxSuccessDescription"
* Only calculate "approvalGas" if the "approvalNeeded" param is truthy in a quote
* "Swap from" has to be set to enable "Review Swap", set a default token for "Swap from"
* Fix: Unable to find value of key "undefined" for locale
* Use array destructuring
* Secure you wallet page
* Remove seedPhraseIntroSidebarBulletThree from messages.json
* Change the second bullet from Figma design
* Requested review changes
* fix error with color variable - fix rebase
* clean list search & fuse threshold decreased
* update search-icon , fix tests
* nice to have highlighting text & cleaning
* unit test on settings & search input ui up on expanded view
* fix color variable in alert scss
* setting search input padding right up
* fix dom warning
* util/search test added & Dom element warning fix
* renaming files
* fix color text in settings search
* settings search highlight text refacto & fix ui
* fix settings-search test & renaming
* Fix styling on search field for edge cases, update components and e2e
E2E tests update for search feature
Update components from class to functional component
#
Fix storybook for search box
Fix styling
Fix unit tests
fix: remove z-index
Fix unit tests
Co-authored-by: amerkadicE <amer.kadic@endava.com>
* Created new screen/page "Token details"
* Change color in scss
* Modify elements to the latest requirements and added unit tests
* Review requested changes
* Condensing files into one component
* Added unit tests for token details page
* Added redirection when switching networks, added image for a token and update unit tests
* Requested review changes
* Modify index.scss regarding of the requested review
* Delete data-testid's from Typography and token-details-page.js
* Requested review changes
This PR adds `snaps` under Flask build flags to the extension. This branch is mostly equivalent to the current production version of Flask, excepting some bug fixes and tweaks.
Closes#11626
The form used for creating a vault on the "Import" page of onboarding
and on the "Restore vault" page is nearly identical, yet the
implementation is totally separate. It has now been extracted to a
separate component, consolidating the two implementations.
There is a "terms of use" checkbox on the import page that isn't on the
restore vault page, so that part has been made optional. The "submit"
button text differs between the two uses as well, so that is
customizable.
There are slight styling differences between the old and new versions
of this form. The fonts and spacing are all using our new standard
design system guidelines, and we're using our standard checkbox now as
well. The spacing and font sizes were chosen somewhat arbitrarily by me
to resemble the old styles, so please feel free to suggest changes if
you think they can be improved upon.
There are some slight copy changes to the "Restore vault" page as well;
the placeholder text and the label for the "Secret Recovery Phrase"
field now matches the "Import" page copy.
* SendHeader, ContactListTab and AdvancedTab story: converted knobs and actions to controls / args
* Added the other function type props to action controls
* Requested review changes
This commit fixes a few issues with ConfirmPageContainerSummary (which
holds the contract being used or action being performed and the money
being sent):
* Remove fixed height so that the secondary currency doesn't get cut off
or spill over
* Add missing padding
* Fix font size of primary and secondary currencies
* Add top border when there is a "address not in your address book"
alert at the top
Co-authored-by: Ariella <ariellavu@gmail.com>
When a lot of transactions are occurring on the network, such as during
an NFT drop, it drives gas fees up. When this happens, we want to not
only inform the user about this, but also dissuade them from using a
higher gas fee (as we have proved in testing that high gas fees can
cause bidding wars and exacerbate the situation).
The method for determining whether the network is "busy" is already
handled by GasFeeController, which exposes a `networkCongestion`
property within the gas fee estimate data. If this number exceeds 0.66 —
meaning that the current base fee is above the 66th percentile among the
base fees over the last several days — then we determine that the
network is "busy".
ESLint rules have been added to enforce our JSDoc conventions. These
rules were introduced by updating `@metamask/eslint-config` to v9.
Some of the rules have been disabled because the effort to fix all lint
errors was too high. It might be easiest to enable these rules one
directory at a time, or one rule at a time.
Most of the changes in this PR were a result of running
`yarn lint:fix`. There were a handful of manual changes that seemed
obvious and simple to make. Anything beyond that and the rule was left
disabled.
The ESLint config for the extension explicitly includes support for
Prettier. However, this is already being provided by our global ESLint
config (`@metamask/eslint-config`). Therefore there is no need to
include it here. In fact, this is causing weird issues where the `curly`
option is getting overridden somehow. After this change, these syntaxes
are invalid:
``` javascript
if (foo) return;
```
``` javascript
if (foo) return 'bar';
```
* Update support links for Flask
* Disable 'prefer-const' in code fence linting
* Add bespoke home footer for Flask and update logic
* fixup! Add bespoke home footer for Flask and update logic
* Fix code fence lint failure
* Fix support request link in account menu
* Fix unit test failure
There was a propType error shown on the snap install screen about the
`name` property of `targetSubjectMetadata` being missing despite it
being marked as required. This property should not have been required,
it does not always exist.
* Prevent automatic rejection of confirmations
Confirmations are now only automatically rejected if a user explicitly
closes the notification window. If we close the window programmatically
because there are no notifications left to show, nothing gets rejected.
This partially avoids a race condition where a confirmation gets
rejected automatically without the user having seen the confirmation
first. This could happen if the confirmation was processed just as the
notification window was being closed.
It's still possible for a confirmation that the user has never seen to
get rejected as a result of the user closing the window. But at least
now it's no longer possible for a confirmation to get rejected in this
manner after the user resolves the last confirmation in the queue.
* Fix bug that prevented automatic closure detection
All windows were being detected as explicit window closures,
essentially just as they were previously, because this variable was
cleared too soon.
* Re-open popup when necessary
After the window is automatically closed, a confirmation may have been
queued up while the window was closing. If so, the popup is now re-
opened.
The `mounted` state was used to derive state from props before the
first render of the Home component. Instead this state is now derived
in the constructor, which is also run before the first render. This
should behave exactly the same, except now we don't need the `mounted`
state or the `deriveStateFromProps` function anymore.
The call to `closeCurrentWindow` that was made in `componentDidUpdate`
has been moved to the constructor as well. There is no need to delay
that call, and this saves us from having to compare current with
previous state in that lifecycle function.
The confirmation page template system allows templates to have alerts,
but it throws an uncaught Promise rejection if a template has no
alerts. This is the unintended side-effect of input validation.
The `getTemplateAlerts` function was updated to always return an array.
The one callsite was updated to expect an empty array if there were no
alerts to render, rather than expecting `undefined`.
* added wrapper around account list to prevent storybook from collapsing the list
* updated translation files
* added snap-connect page
* refactored account list out of the choose account component
* fixed width
* removed unnecessary scss from choose-account component, fixed props in choose account story
* removed snaps-connect page, added comments to ChooseAccount
* updated choose account subtitle text, updated styling for title & subtitle, removed redundant account list story
* updated component name, updated paths
* fixed linter errors
* added comments
* removed unused message
* removed selectAccounts key from all locales
* updated class name for account list header, updated allAreSelected function to use length checks
* Revert "removed unused message"
This reverts commit 32771bc83c08f120825ef75f0741f3034e7dbecb.
* Revert "removed selectAccounts key from all locales"
This reverts commit ccfa4a860f9a75693d893d7c404384e719de297e.
* updated locale messages to use selectAccounts key
* removed stray import
* updated scss
* updated translation key
* removed chooseAccounts key from en locale
* removed optional chaining
* changes
* updated subjectMetadata
* updated subject types
* update useOriginMetadata function to include unknown subject type
* updated permission connect header props, removed host and added subjectType to targetSubjectMetadata
* added subjectType to targetSubjectMetadata
* removed console.log
* changed prop name to iconUrl
* Make this a form
Similar to "import-with-seed-phrase" I would like to be able to restore my vault by pressing `<enter>` on my keyboard.
* actually test enter
* preventDefault()
The ESLint config has been updated to v8. The breaking changes are:
* The Prettier rule `quoteProps` has been changed from `consistent` to
`as-needed`, meaning that if one key requires quoting, only that key is
quoted rather than all keys.
* The ESLint rule `no-shadow` has been made more strict. It now
prevents globals from being shadowed as well.
Most of these changes were applied with `yarn lint:fix`. Only the
shadowing changes required manual fixing (shadowing variable names were
either replaced with destructuring or renamed).
The dependency `globalThis` was added to the list of dynamic
dependencies in the build system, where it should have been already.
This was causing `depcheck` to fail because the new lint rules required
removing the one place where `globalThis` had been erroneously imported
previously.
A rule requiring a newline between multiline blocks and expressions has
been disabled temporarily to make this PR smaller and to avoid
introducing conflicts with other PRs.
* Ensure that function representation on hex and data tabs are consistent
* Don't show redundant hex tab when deploying contract
* Show standard pointer cursor on error messages in tx-decoder component
* Don't show activity log for incoming transactions
* Update localization
* Fix error message
* Update EIP-1559 UI on the View Quote page (WIP)
* UI redesign for the View Quote page in Swaps, update tests, refactoring
* Update styles for the View Quote page
* Improve scrolling and styling for the View Quote page
* Update snapshots
* Fix a scrolling issue
* Use Ethereum mainnet for swaps API calls if it's Rinkeby
* UI / content updates on the View Quote page
* Remove unused content in Swaps
* Fix an ESLint issue
* Update UTs with the latest content
* Renaming
* Remove 2 more unused content strings
# Permission System 2.0
## Background
This PR migrates the extension permission system to [the new `PermissionController`](https://github.com/MetaMask/snaps-skunkworks/tree/main/packages/controllers/src/permissions).
The original permission system, based on [`rpc-cap`](https://github.com/MetaMask/rpc-cap), introduced [`ZCAP-LD`](https://w3c-ccg.github.io/zcap-ld/)-like permissions to our JSON-RPC stack.
We used it to [implement](https://github.com/MetaMask/metamask-extension/pull/7004) what we called "LoginPerSite" in [version 7.7.0](https://github.com/MetaMask/metamask-extension/releases/tag/v7.7.0) of the extension, which enabled the user to choose which accounts, if any, should be exposed to each dapp.
While that was a worthwhile feature in and of itself, we wanted a permission _system_ in order to enable everything we are going to with Snaps.
Unfortunately, the original permission system was difficult to use, and necessitated the creation of the original `PermissionsController` (note the "s"), which was more or less a wrapper for `rpc-cap`.
With this PR, we shake off the yoke of the original permission system, in favor of the modular, self-contained, ergonomic, and more mature permission system 2.0.
Note that [the `PermissionController` readme](https://github.com/MetaMask/snaps-skunkworks/tree/main/packages/controllers/src/permissions/README.md) explains how the new permission system works.
The `PermissionController` and `SubjectMetadataController` are currently shipped via `@metamask/snap-controllers`. This is a temporary state of affairs, and we'll move them to `@metamask/controllers` once they've landed in prod.
## Changes in Detail
First, the changes in this PR are not as big as they seem. Roughly half of the additions in this PR are fixtures in the test for the new migration (number 68), and a significant portion of the remaining ~2500 lines are due to find-and-replace changes in other test fixtures and UI files.
- The extension `PermissionsController` has been deleted, and completely replaced with the new `PermissionController` from [`@metamask/snap-controllers`](https://www.npmjs.com/package/@metamask/snap-controllers).
- The original `PermissionsController` "domain metadata" functionality is now managed by the new `SubjectMetadataController`, also from [`@metamask/snap-controllers`](https://www.npmjs.com/package/@metamask/snap-controllers).
- The permission activity and history log controller has been renamed `PermissionLogController` and has its own top-level state key, but is otherwise functionally equivalent to the existing implementation.
- Migration number 68 has been added to account for the new state changes.
- The tests in `app/scripts/controllers/permissions` have been migrated from `mocha` to `jest`.
Reviewers should focus their attention on the following files:
- `app/scripts/`
- `metamask-controller.js`
- This is where most of the integration work for the new `PermissionController` occurs.
Some functions that were internal to the original controller were moved here.
- `controllers/permissions/`
- `selectors.js`
- These selectors are for `ControllerMessenger` selector subscriptions. The actual subscriptions occur in `metamask-controller.js`. See the `ControllerMessenger` implementation for details.
- `specifications.js`
- The caveat and permission specifications are required by the new `PermissionController`, and are used to specify the `eth_accounts` permission and its JSON-RPC method implementation.
See the `PermissionController` readme for details.
- `migrations/068.js`
- The new state should be cross-referenced with the controllers that manage it.
The accompanying tests should also be thoroughly reviewed.
Some files may appear new but have just moved and/or been renamed:
- `app/scripts/lib/rpc-method-middleware/handlers/request-accounts.js`
- This was previously implemented in `controllers/permissions/permissionsMethodMiddleware.js`.
- `test/mocks/permissions.js`
- A truncated version of `test/mocks/permission-controller.js`.
Co-authored-by: Mark Stacey <markjstacey@gmail.com>
A redundant comparison for the `EIP_1559_V2_ENABLED` variable has been
removed. This variable is a boolean, so it can be treated as a boolean
directly in most cases.
One such comparison has been preserved for the purpose of allowing unit
testing, because `process.env` entries are always strings in Node.js. A
comment was added to explain this.
The `disableRipple` prop was resulting in a React error in development
builds because it was unrecognized by React. This prop dates back to
when we were using the `@material-ui` Button class. It no longer serves
any purpose, so it has been removed.
A propType error was showing up during e2e tests with a `testDev`
build. It was caused by `process.env.IN_TEST` being treated as a
boolean, when in fact it is either the string `'true'` or a boolean.
`IN_TEST` has been updated to always be a boolean. `loose-envify` has
no trouble injecting boolean values, so there's no reason to treat this
as a string.
* conversion date fix
* update in settings conversion date - no internet
* update conversionDate fetch - setting container
* no currency date message updated
* integration for tx decoding confirmation and history view
* upgrading @truffle/decoder to latest release 5.1.0
* Update acorn and colors patches
* feat: remove redundant styling
* feat: basic integration for nickname components
* feat: wiring functionality of adding new nickname
* feat: wire functionality of showing nickname modal
* feat: link the nickname popover with add/update popover
* feat: moving forward with address nicknames integration
* feat: fixing a bug related to passing chainId in addressBook
* feat: populating memo prop in addressbook entry
* feat: add explorer link
* feat: bug fixing update nickname component
* feat: fix proptypes
* feat: adding tooltip for copying nickname address
* featL fix styling for tx-details page
* feat: optimize code for error handling
* feat: limiting transaction decoding to tx with data
* feat: remove tree UI component
* feat: adding request to check for tx decoding supported networks
* feat: showing data hex component
* feat: fix react warnings
* feat: remove extra margin in tx decoding
* Remove unused package @truffle/source-map-utils
* Ensure messages get translated
* feat: link tx-decoding addresses with nicknames
* Omit value for boolean attributes
* Fix props reading in CopyRawData
* fix: fixing issue with transaltion
* Fix lint errors in TransactionDecoding
- Remove unused import
- Reorder imports
- Address conflict between caught `error` and error state flag by
renaming state flag to `hasError`
- Fix requestUrl identifier casing and use of template string
- Ensure `useEffect` gets passed the deps it needs
- Add scope braces around case statement where it's needed
- Omit literal `true` for boolean jsx attribute
- Refactor nested ternary as `if` statements
* fix: revert fetchWithCache modifications
* Fix linting for TransactionListItemDetails
- Remove unused import
- Fix import spacing
- Remove unused prop dereference
- Fix string interpolation for translated From/To
* Moving to popover pattern
* fix: sass color variable
* Omit value for boolean attribute
* Remove changes from modal.js
* fix: refactor nickname popovers
* Ensure const gets declared before it's used
* Fix linting for ConfirmTransactionBase
- Remove unused prop chainId
- Stop destructuring an unused field
* fix: refactor usage of nicknames popovers in send-content-container
* fix: remove extra prop updateAccountNicknameModal
* fix: refactor code for address.component
* fix: remove extra tooltip
* Ensure NicknamePopovers always returns component
* Fix linting for NicknamePopover component
- Fix useCallback deps
- Switch ternary to logical-or
* Fix linting for SenderToRecipient
... by fixing import order
* Remove unused addressCopied state
* Delete empty file
* fix: remove sender-to-recipient.container
* fix: refactor usage of nickname popovers in confirm-page-container
* fix: bug related to state variable
* Stylelint fix
* Lint fix
* Change "Total Amount" to "Total"
* Lint fix locales
* Update address-book.spec.js
* e2e test update
* Update e2e tests
* Fix issue where absence of function params in data hex tab would result in rendering a string
* Fix border radius, and width and height in small notification windows, of the update-nickname-popover
* Remove fake await
* Clean up
* Clean up
Co-authored-by: Alaa Hadad <alaahd@Alaas-MacBook-M1-Pro-14-inch.local>
Co-authored-by: Dan Miller <danjm.com@gmail.com>
Co-authored-by: g. nicholas d'andrea <gnidan@trufflesuite.com>
* Trigger Build
* Trigger Build
* Move swaps index variables to redux
* all optimizations so far
* Add better equality checks for selectors in swaps index and build quote
* Clean up PR, remove extra code and logs
* Clean up lavamoat file
* Fixes for optimizations
* Update tests and test snapshots
* Remove unnecessary tests
* Remove unnecessary console log
* Trigger Build
* Trigger Build
* Add delay to account for remote call made by trezor keyring
Co-authored-by: Dan Miller <danjm.com@gmail.com>
* Add support for eip-1559 on Trezor
* temp
* Lint fix
* Store trezor model type in background state instead attempting to get it in the frontend
* code simplification
* Temp update to eth-trezor-keyring version
* Tempory update to eth-trezor-keyring version
* Temp update to eth-trezor-keyring version
* Fix display of hdpath selector in connect hardware flow for trezor
* Updating the package version but we still need to run yarn setup and update the lockfile, once the package is updated
* Update yarn.lock
* Fix unit tests
