`immer` has been updated to v9. This didn't require any changes on our
part; the only breaking changes are to the TypeScript types [1].
The `@reduxjs/toolkit` library has been updated as well, to ensure that
it's using the updated version of Immer internally as well. This update
makes our patch of that package obsolete, as the problematic pattern
that were were patching out is no longer present.
[1]: https://github.com/immerjs/immer/releases/tag/v9.0.0
* lavamoat - add lavamoat to webapp background
* test:e2e - add delay to resolve failure
* test:e2e - add delay to resolve failure
* build - add a switch for applying lavamoat, currently off for all
* test/e2e - remove delays added for lavamoat
* Revert "test/e2e - remove delays added for lavamoat"
This reverts commit 79c3479f15c072ed362ba1d4f1af41ea11a17d63.
The warnings about use of the unsafe Buffer constructor have been
addressed by package updates and patches.
The updates were:
* `gulp-sourcemaps` was updated from v2 to v3, and was patched to
replace remaining uses of the `Buffer` constructor
* Upstream PR: https://github.com/gulp-sourcemaps/gulp-sourcemaps/pull/388
* The transitive dependency `yazl` was updated from v2.4.3 to v2.5.1
in the lockfile.
* The abandoned packages `combine-source-map` and `inline-source-map`
were patched.
The dependency `caniuse-lite` has been updated using a Yarn resolution,
because it was pinned to a specific version by some dependencies. All
versions requested in our dependency tree are 1.x so this did not
introduce any breaking changes.
This resolves a frequent console warning that shows up during builds,
and when running tests and the linter.
* bump @metamask/controllers to v15.0.1 and remove AbortController workaround in e2e tests
* remove old abortcontroller polyfill
* bump @metamask/controllers to v15.0.2
There are a few issues encountered when running `yarn setup` on new
Apple Silicon (aka M1, aka arm64) Macs:
* The script halts when attempting to run the install step for
the `chromedriver` package with the message "Only Mac 64 bits
supported". This is somewhat misleading as it seems to indicate that
chromedriver can only be installed on a 64-bit Mac. However, what I
think is happening is that the installation script for `chromedriver`
is not able to detect that an arm64 CPU *is* a 64-bit CPU. After
looking through the `chromedriver` repo, it appears that 87.0.1 is the
first version that adds a proper check ([1]).
Note that upgrading chromedriver caused the Chrome-specific tests to
fail intermittently on CI. I was not able to 100% work out the reason
for this, but ensuring that X (which provides a way for Chrome to run
in a GUI setting from the command line) is available seems to fix
these issues.
* The script also halts when attempting to run the install step for
the `electron` package. This happens because for the version of
`electron` we are using (9.4.2), there is no available binary for
arm64. It appears that Electron 11.x was the first version to support
arm64 Macs ([2]). This is a bit trickier to resolve because we don't
explicitly rely on `electron` — that's brought in by `react-devtools`.
The first version of `react-devtools` that relies on `electron` 11.x
is 4.11.0 ([3]).
[1]: 469dd0a6ee
[2]: https://www.electronjs.org/blog/apple-silicon
[3]: https://github.com/facebook/react/blob/main/packages/react-devtools/CHANGELOG.md#4110-april-9-2021
* EIP-1559 - Provide support for Ledger
* Update ui/selectors/selectors.js
Co-authored-by: Mark Stacey <markjstacey@gmail.com>
* Add shared constants for hw types
* bump eth-ledger-bridge-keyring to v0.7.0
Co-authored-by: David Walsh <davidwalsh83@gmail.com>
Co-authored-by: Mark Stacey <markjstacey@gmail.com>
Co-authored-by: Alex <adonesky@gmail.com>
Adds the latest version of `@metamask/controllers`, and updates our usage of the `ApprovalController`, which has been migrated to `BaseControllerV2`. Of [the new `controllers` release](https://github.com/MetaMask/controllers/releases/tag/v15.0.0), only the `ApprovalController` migration should be breaking.
This is the first time we use events on the `ControllerMessenger` to update the badge, so I turned the messenger into a property on the main `MetaMaskController` in order to subscribe to events on it in `background.js`. I confirmed that the badge does indeed update during local QA.
As it turns out, [MetaMask/controllers#571](https://github.com/MetaMask/controllers/pull/571) was breaking for a single unit test case, which is now handled during setup and teardown for the related test suite (`metamask-controller.test.js`).
This update includes just configuration updates. There are no
functional changes. The updated config is only used as a fallback in
case the config update fails for some reason.
* add metametrics wrapper
* add history dep
* provide test data and mock react router
* add first confirmaion screen
* figure out a way to mock match.params
* render token approval with data
* fix lockfile
* fix lint
* remove use effect
* lintfix
* add . for src paths
* litfix
* Add knobs to change redux store for confirm-approve component (Storybook) (#11135)
* add knob for domain
* knobify
* remove logs
* remove comment
* lintfix
* fix comments
* add background calls + metriccs event to storybook acctions
* lintfixxxx
This update includes a bug fix that made v9.0.1 incompatible with valid
entries for the `package.json` "repository" field. Specifically, that
field required that the repository be the GitHub repo URL, but the
field is meant to point at the _git_ repo URL (the difference between
the two on GitHub is the `.git` suffix).
Now that that bug as been fixed, we can update the `repository` field
to point at `https://github.com/MetaMask/metamask-extension.git`, which
is what it should be.
The CurrencyRateController has been migrated to the BaseControllerV2
API, which includes various API changes. These changes include:
* The constructor now expects to be passed a
`RestrictedControllerMessenger`.
* State changes are subscribed to via the `ControllerMessenger` now,
rather than via a `subscribe` function.
* The state and configration are passed in as one "options" object,
rather than as two separate parameters
* The polling needs to be started explicitly by calling `start`. It
can be stopped and started on-demand now as well.
* Changing the current currency or native currency will now throw an
error if we fail to update the conversion rate.
The `ComposableObservableStore` has been updated to accomodate these
new types of controllers. The constructor has been updated to use an
options bag pattern as well, to make the addition of the new required
`controllerMessenger` parameter a bit less unweildly.
Update `@metamask/controllers` from v6 to v8. The breaking changes were
all in controllers that aren't used by the extension, so no changes
were required.
A resolution was required to update the version of `lodash` used by
`ganache-core`, and a previous resolution required updating. All other
lodash instances in our dependency tree were within range, and could be
updated in the lockfile.
The `auto-changelog` script has been replaced with the package
`@metamask/auto-changelog`. This package includes a script that has
an `update` command that is roughly equivalent to the old
`auto-changelog.js` script, except better. The script also has a
`validate` command.
The `repository` field was added to `package.json` because it's
utilized by the `auto-changelog` script, and this was easier than
specifying the repository URL with a CLI argument.
* Swaps: Show a network name dynamically in a tooltip
* Replace “Ethereum” with “$1”, change “Test” to “Testnet”
* Replace 이더리움 with $1
* Translate network names, use ‘Ethereum’ by default if a translation is not available yet
* Reorder messages to resolve ESLint issues
* Add a snapshot test for the FeeCard component, increase Jest threshold
* Enable snapshot testing into external .snap files in ESLint
* Add the “networkNameEthereum” key in ko/messages.json, remove default “Ethereum” value
* Throw an error if chain ID is not supported by the Swaps feature
* Use string literals when calling the `t` fn,
* Watch Jest tests silently (no React warnings in terminal, only errors)
* Add @testing-library/jest-dom, import it before running Jest tests
* Add snapshot testing of Swaps’ React components for happy paths, increase minimum threshold for Jest
* Add the test/jest folder for Jest setup and shared functions, use it in Swaps Jest tests
* Fix ESLint issues, update linting config
* Enable ESLint for .snap files (Jest snapshots), throw an error if a snapshot is bigger than 50 lines
* Don’t run lint:fix for .snap files
* Move `createProps` outside of `describe` blocks, move store creation inside tests
* Use translations instead of keys, update a rendering function to load translations
* Make sure all Jest snapshots are shorter than 50 lines (default limit)
* Add / update props for Swaps tests
* Fix React warnings when running tests for Swaps
* Setup jest config
* Adjust test for jest.
* Adjust lint config
* Omit swaps ui folder for unit testing
* Omit swaps from test:unit:lax
* Add jest.config.js to script files
* Restore mocks rather than clearing them.
* Update jest config and adjust lint to include subdirs
* Convert view-quote-price-difference test to jest
* Add jest ci and ci coverage scripts. Add jest unit test to general test command
* Add test coverage to ci
* Use --ignore flag
* Fixup
* Add @metamask/eslint-config-jest
* Update .eslintrc.js
Co-authored-by: Mark Stacey <markjstacey@gmail.com>
* Adds jest-coverage/
Co-authored-by: Mark Stacey <markjstacey@gmail.com>
The `auto-changelog.js` script has been refactoring into various
different modules. This was done in preparation for migrating this to
a separate repository, where it can be used in our libraries as well.
Functionally this should act _mostly_ the same way, but there have been
some changes. It was difficult to make this a pure refactor because of
the strategy used to validate the changelog and ensure each addition
remained valid. Instead of being updated in-place, the changelog is now
parsed upfront and stored as a "Changelog" instance, which is a new
class that was written to allow only valid changes. The new changelog
is then stringified and completely overwrites the old one.
The parsing had to be much more strict, as any unanticipated content
would otherwise be erased unintentionally. This script now also
normalizes the formatting of the changelog (though the individual
change descriptions are still unformatted).
The changelog stringification now accommodates non-linear releases as
well. For example, you can now release v1.0.1 *after* v2.0.0, and it
will be listed in chronological order while also correctly constructing
the `compare` URLs for each release.
* update ses
* build - reference ses directly
* deps - unify regenerator-runtime versions on 0.13.7
* patches - apply regenerator-runtime ses compat patch\nhttps://github.com/facebook/regenerator/pull/411
* patches - patch regenerator-runtime for latest ses fix
* reduc patch, new lockdown severe override taming
* updated redux patch
* update redux patch for production
* ignore lockdown in lint
* deps - bump patch-package just in case
* trailing comma
* remove ses as dep
* fix path for frozen promise
* remove js extension in lockdown require
* Revert "ignore lockdown in lint"
This reverts commit 8cefdc94dd25d7781bb09eed8af36441397676da.
* Revert "build - reference ses directly"
This reverts commit 30371a377dcdd781c1bf9abe55e9c8ae34da26b5.
* deps - update ses
* Revert "fix path for frozen promise"
This reverts commit 966e4c60921a25befe8ca8dea58313cc25852f72.
Co-authored-by: kumavis <aaron@kumavis.me>
* deps - remove remotedev-server
* Remove stale references from allow-scripts config
Any packages that are no longer in the dependency tree have been
removed from the `allow-scripts` config.
Co-authored-by: Mark Stacey <markjstacey@gmail.com>
The `elliptic` package has been updated to v6.5.4 to address a security
advisory regarding a vulnerability in v6.5.3. We are not affected by
this vulnerability to the best of our knowledge. This is just to stay
on the safe side, and fix our audit check.
* Add warning system for 'confusable' ENS names (#9129)
Uses unicode.org's TR39 confusables.txt to display a warning when
'confusable' unicode points are detected.
Currently only the `AddRecipient` component has been updated, but the new
`Confusable` component could be used elsewhere
The new `unicode-confusables` dependency adds close to 100KB to the
bundle size, and around 30KB when gzipped.
Adds 'tag' prop to the tooltop-v2 component
Use $Red-500 for confusable ens warning
Lint Tooltip component
Update copy for confusing ENS domain warning.
* Fix prop type
Co-authored-by: Mark Stacey <markjstacey@gmail.com>
This package hasn't been used since #8140, which dropped it for being
too slow and of minimal benefit.
We should consider re-adding this as a CI check to ensure images are
optimized, but I don't think it should be re-added to the build process
itself.
This package was added as a devDependency to address a peerDependency
warning when installing Storybook v5.3.14. We're now using Storybook
v6, which doesn't list this as a peerDependency.
The packages `eth-sig-util` and `ethashjs` have been updated to their
latest in-range versions in the lockfile. This removes the last
instance of `ethereumjs-abi@0.6.5` from our dependency tree, as well as
the last non-optional instance of `sha3` (it's still present as a
transitive dependency of an optional development dependency via
`ganache`)
Fixes#10356
There was a bug in the inpage provider that would mistakenly report
usage of our injected `web3` instance when the `web3.currentProvider`
property was accessed. This was fixed in v8.0.4 of
`@metamask/inpage-provider`.
* use @lavamoat/allow-scripts for package postinstall allow list
* dnode: set "weak" to false
Co-authored-by: kumavis <kumavis@users.noreply.github.com>
Co-authored-by: Erik Marks <25517051+rekmarks@users.noreply.github.com>
The changes made between v1.3.2 and v1.5.0 of `@reduxjs/toolkit` don't
appear to affect us at all. They mostly consist of feature additions
and bug fixes for edge cases we haven't encountered.[1]
The one change that is technically breaking is that v8 of `immer` now
freezes state objects in production rather than just in development.
That would only be breaking if we were mutating Redux state though,
which we aren't doing in the few Redux slices in which we use
`@reduxjs/toolkit`. Even if we were, we would have noticed that it
broke in development already.
[1]: https://github.com/reduxjs/redux-toolkit/releases
This update comes with a breaking change to the Approval controller. It
now requires a `defaultApprovalType` parameter.
I don't think we have any use for a default approval type, but I've
added a "NO_TYPE" one for now because it's a strict requirement. We
should consider making this parameter optional in the future, for cases
like this where it's not needed.
This update will hopefully address some caching issues we've been
seeing with our phishing configuration. See here for more details:
https://github.com/MetaMask/controllers/pull/297
We don't look at coveralls very much. We might occasionally consult it
to see a report on our code coverage, but that report is already
generated entirely locally, and has been added to the MetaMask bot
comment in #10061.
Update `geckodriver` to the latest version, and `selenium-webdriver`
to the second-most-recent version. Updates include various dependency
updates, bug fixes, and minor features. None of the updates seem to
directly affect us, aside from one new feature of `selenium-webdriver`
that updates the `installAddon` function to support `.zip` files, which
will be used in a subsequent PR.
`selenium-webdriver` was pinned one version behind latest because the
latest version caused our Chrome e2e tests to fail with a mysterious
error whenever `getAttribute` was called on a WebElement.
The `eth_decrypt` used to fail on Firefox with a recursion error.
Updating these `tweetnacl` dependencies seemed to have fixed the issue
the last time I tested this.
When I tried to reproduce the failure today, it failed due to a
different reason, both before and after this update.
But nonetheless, it still seems like a good idea to update. These newer
versions have no breaking changes and contain important bug fixes.
* @metamask/inpage-provider@^8.0.0
* Replace public config store with JSON-RPC notifications
* Encapsulate notification permissioning in permissions controller
* Update prefix of certain internal RPC methods and notifications
* Add accounts to getProviderState
* Send accounts with isUnlocked notification (#10007)
* Rename provider streams, notify provider of stream failures (#10006)
* Remove use of ethgassthat; use metaswap /gasPrices api for gas price estimates
* Remove references to ethgasstation
* Pass base to BigNumber constructor in fetchExternalBasicGasEstimates
* Update ui/app/hooks/useTokenTracker.js
Co-authored-by: Erik Marks <25517051+rekmarks@users.noreply.github.com>
* Delete gas price chart
* Remove price chart css import
* Delete additional fee chart code
* Lint fix
* Delete more code no longer used after ethgasstation removal
Co-authored-by: Erik Marks <25517051+rekmarks@users.noreply.github.com>
Our Storybook dependencies have been updated to v6.1.9, from v5. This
was done to address a security vulnerability in a transitive dependency
of these packages (`highlight.js`).
The primary changes required by this Storybook update were the change
in import path for the `withKnobs` hook, the change in background
config format, and the webpack configuration. Storybook seems to work
correctly.
The migration was guided by the Storybook changelog[1] and the
Storybook v6 migration guide[2].
There is one Storybook error remaining; it fails to load the Euclid
font. This is a pre-existing error though, so we can fix it in a later
PR.
The `yarn.lock` file was deduplicated in this PR as well, as it was
required to fix various install warnings that were introduced with this
update.
[1]: https://github.com/storybookjs/storybook/blob/next/CHANGELOG.md
[2]: https://github.com/storybookjs/storybook/blob/next/MIGRATION.md
* Freezeglobals: remove Promise freezing, add lockdown
* background & UI: temp disable sentry
* add loose-envify, dedupe symbol-observable
* use loose envify
* add symbol-observable patch
* run freezeGlobals after sentry init
* use require instead of import
* add lockdown to contentscript
* add error code in message
* try increasing node env heap size to 2048
* change back circe CI option
* make freezeGlobals an exported function
* make freezeGlobals an exported function
* use freezeIntrinsics
* pass down env to child process
* fix unknown module
* fix tests
* change back to 2048
* fix import error
* attempt to fix memory error
* fix lint
* fix lint
* fix mem gain
* use lockdown in phishing detect
* fix lint
* move sentry init into freezeIntrinsics to run lockdown before other imports
* lint fix
* custom lockdown modules per context
* lint fix
* fix global test
* remove run in child process
* remove lavamoat-core, use ses, require lockdown directly
* revert childprocess
* patch package postinstall
* revert back child process
* add postinstall to ci
* revert node max space size to 1024
* put back loose-envify
* Disable sentry to see if e2e tetss pass
* use runLockdown, add as script in manifest
* remove global and require from runlockdown
* add more memory to tests
* upgrade resource class for prep-build & prep-build-test
* fix lint
* lint fix
* upgrade remote-redux-devtools
* skillfully re-add sentry
* lintfix
* fix lint
* put back beep
* remove envify, add loose-envify and patch-package in dev deps
* Replace patch with Yarn resolution (#9923)
Instead of patching `symbol-observable`, this ensures that all
versions of `symbol-observable` are resolved to the given range, even
if it contradicts the requested range.
Co-authored-by: Mark Stacey <markjstacey@gmail.com>
`ganache-core` and `ganache-cli` have been updated to the latest
published versions.
Two Yarn resolutions have been made unnecessary by this update, so they
have been removed. They were added to update dependencies of
`ganache-core` to address security advisories. They have since been
updated in the latest `ganache-core` release.
* Add ses lockdown to build system using lavamoat-core
* use proper object.assign version
* disable lint rules for ses lockdown
* deps - update rtlcss
Co-authored-by: kumavis <aaron@kumavis.me>
Co-authored-by: Mark Stacey <markjstacey@gmail.com>
`@metamask/eslint-config` has been updated to v4.1.0. This update
requires that we update `eslint` to v7 as well, which in turn requires
updating most `eslint`-related packages.
Most notably, `babel-eslint` was replaced with `@babel/eslint-parser`,
and `babel-eslint-plugin` was replaced by `@babel/eslint-plugin`. This
required renaming all the `babel/*` rules to `@babel/*`.
Most new or updated rules that resulted in lint errors have been
temporarily disabled. They will be fixed and re-enabled in subsequent
PRs.
On Windows, spawn fails if the exact filename
of a binary isn't passed. e.g. `spawn('yarn')` fails
because the binary is named `yarn.cmd`.
Instead, we depend on `cross-spawn` which handles differences
in `spawn` across platforms.
All three of our Sentry packages have been updated to the latest
versions. There appear to have been no breaking changes - just bug
fixes and new features.
This change updates `node-forge` to the latest published version, 0.10.0. This
update resolves a security advisory [1] brought in via our `3box` dependency.
[1]:https://www.npmjs.com/advisories/1561
JSON files are now sorted by key with `prettier`, using the plugin
`prettier-plugin-sort-json`. This does not affect `package.json`
because `prettier` uses a special parser for that file, as it has
a more restrictive format than JSON.
Instead of using `eslint-plugin-json` for linting JSON files,
`prettier` is now used. `prettier` is capable of detecting and
correcting more problems than `eslint-plugin-json` can, such as
indentation.
All JSON files have been run through `prettier`. The changes are all
superficial.
