* use session storage, instead of chrome.runtime.onStartup and globalThis, for firstTimeLoaded architecture
* Ensure account tracker accounts remain defined upon service worker restart
* lint fix
* Simplify code
* Only call browser.storage.session in mv3
* Only call browser.storage.session.set after resetStates in mv3
* fix metamask controller reset states unit tests
* fix test
* fix test
* Actually fix tests
* lint fix
We want to convert NetworkController to TypeScript in order to be able
to compare differences in the controller between in this repo and the
core repo. To do this, however, we need to convert the dependencies of
the controller to TypeScript.
As a part of this effort, this commit converts
`shared/constants/metametrics` to TypeScript. Note that simple objects
have been largely replaced with enums. There are some cases where I even
split up some of these objects into multiple enums.
Co-authored-by: Mark Stacey <markjstacey@gmail.com>
The `network` store of the network controller crams two types of data
into one place. It roughly tracks whether we have enough information to
make requests to the network and whether the network is capable of
receiving requests, but it also stores the ID of the network (as
obtained via `net_version`).
Generally we shouldn't be using the network ID for anything, as it has
been completely replaced by chain ID, which all custom RPC endpoints
have been required to support for over a year now. However, as the
network ID is used in various places within the extension codebase,
removing it entirely would be a non-trivial effort. So, minimally, this
commit splits `network` into two stores: `networkId` and
`networkStatus`. But it also expands the concept of network status.
Previously, the network was in one of two states: "loading" and
"not-loading". But now it can be in one of four states:
- `available`: The network is able to receive and respond to requests.
- `unavailable`: The network is not able to receive and respond to
requests for unknown reasons.
- `blocked`: The network is actively blocking requests based on the
user's geolocation. (This is specific to Infura.)
- `unknown`: We don't know whether the network can receive and respond
to requests, either because we haven't checked or we tried to check
and were unsuccessful.
This commit also changes how the network status is determined —
specifically, how many requests are used to determine that status, when
they occur, and whether they are awaited. Previously, the network
controller would make 2 to 3 requests during the course of running
`lookupNetwork`.
* First, if it was an Infura network, it would make a request for
`eth_blockNumber` to determine whether Infura was blocking requests or
not, then emit an appropriate event. This operation was not awaited.
* Then, regardless of the network, it would fetch the network ID via
`net_version`. This operation was awaited.
* Finally, regardless of the network, it would fetch the latest block
via `eth_getBlockByNumber`, then use the result to determine whether
the network supported EIP-1559. This operation was awaited.
Now:
* One fewer request is made, specifically `eth_blockNumber`, as we don't
need to make an extra request to determine whether Infura is blocking
requests; we can reuse `eth_getBlockByNumber`;
* All requests are awaited, which makes `lookupNetwork` run fully
in-band instead of partially out-of-band; and
* Both requests for `net_version` and `eth_getBlockByNumber` are
performed in parallel to make `lookupNetwork` run slightly faster.
The network controller has a variety of methods that just retrieve
controller state. These methods are not necessary because controller
state is already part of the public API of the controller and can be
accessed directly.
These methods are:
- getCurrentChainId
- getCurrentRpcUrl
- getNetworkIdentifier
- getNetworkState
- getProviderConfig
- isNetworkLoading
This is part of a larger effort to normalize the API of both network
controllers, to make them easier to merge.
Use DesktopManager in background script to redirect internal and external connections to the desktop app.
Include DesktopController in the MetaMask controller.
Support desktop keyrings in MetaMask controller via the overrides object.
Create middleware handler to connect to the desktop app while UI code is pending.
Add build system support for desktop specific configuration variables.
Support has been restored for Chromium v78. Previously the extension
would crash upon startup.
The main incompatibility was the use of ES2020 operators (the optional
chain and nullish coalesce operators) in the libraries
`@ethereumjs/util` and `superstruct`. This was resolved by transpiling
those libraries.
After fixing that, the extension no longer crashed but the UI refused
to connect. This was because the UI process was not being identified as
an internal process, because the code responsible for checking that was
relying on the `origin` property of `MessageSender` [1] which wasn't
added until Chromium v80. The check has been updated to use the `url`
property instead, which existed in older versions of Chrome.
Lastly, the content security policy was updated to include the default
content security policy alongside the intended modification. Newer
versions of Chrome will merge the configired CSP with the default, but
older versions required it to be explicitly specified. This should not
result in any functional change.
[1]: https://developer.chrome.com/docs/extensions/reference/runtime/#type-MessageSender
* Simplify MV3 initialization
The MV3 initialization logic was complicated and introduced race
difficult-to-reproduce race conditions when dapps connect during
initialization.
It seems that problems were encountered after the UI tried to connect
before the background was initialized. To address this, the
initialization step was _delayed_ until after the first connection.
That first connection was then passed into the initialization function,
and setup properly after initialization had begun.
However, this special treatment is only given for the first connection.
Subsequent connections that still occur during initialization would
fail. This also results in the initialization being needlessly delayed,
which is concerning given that our main performance goal is to speed it
up.
* Setup connect listeners before controller initialization
* Add comments
* Add comment explaining isInitialized step
* Show error message if service worker did not load (respond to the UI)
after 1 minute.
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
* Remove console.log
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
* New Error message design
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
* Fix tests
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
* Use lastTimeStamp instead of keeping track of message ids
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
* Do not initial channe every second.
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
* New logic to check if SW is stuck
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
* Updating controller dependency
* fix
* fix
* fix
* fix
* fixes
* Lavamoat auto
* Update URLs for phishing detection testcase
* update lavamoat files
* call phishingController.test synchronously again
* bump @metamask/controllers to v32.0.1
* lint
* update policy files
* bump controllers version again
* modify update phishing list strategy
* revert back to use isOutOfDate, but without blocking substream
* possible way to fix e2e tests?
* enable testing
* Remove promise return from setupController in background.js, as it is no longer used
* Ensure updatePhishingLists is called in MM contrller constructer, so that phishing lists are updated right away
Co-authored-by: seaona <mariona@gmx.es>
Co-authored-by: Alex <adonesky@gmail.com>
Co-authored-by: Dan Miller <danjm.com@gmail.com>
A patch made in #15672 was found to be unnecessary. Instead of setting
a `rootGlobals` object upon construction of the root compartment, we
are now creating a `sentryHooks` object in the initial top-level
compartment. I hadn't realized at the time that the root compartment
would inherit all properties of the initial compartment `globalThis`.
This accomplishes the same goals as #15672 except without needing a
patch.
Our Sentry setup relies upon application state, but it wasn't able to
access it in LavaMoat builds because it's running in a separate
Compartment.
A patch has been introduced to the LavaMoat runtime to allow the root
Compartment to mutate the `rootGlobals` object, which is accessible
from outside the compartment as well. This lets us expose application
state to our Sentry integration.
* Don't send errors to sentry if users have not opted-in to participate in metametrics
* Don't capture opt-out metrics
* Move the metrics-opt in screen to immediately after the welcome screen
* Ensure that global.getSentryState is set in the background
* Fix e2e tests after rearranging onboardin flow
* Fix unit tests
* More e2e test fixes
* Remove unnecessary wrappers around capture exception
* origin/develop: (131 commits)
Update `protobufjs` and remove obsolete advisory exclusion (#14841)
Include snap version in pill (#14803)
Update PULL_REQUEST_TEMPLATE.md (#14790)
fix: keystone transaction qrcode has no white spacing (#14798)
Snap notifications integration (#14605)
Upgrade @metamask/eth-ledger-bridge-keyring (#14799)
snaps-skunkworks@0.15.0 (#14772)
Fix proptype errors in network dropdown, tx list item details, and account details modal tests (#14747)
Ensure transaction type is correctly updated on edit (#14721)
Add fiat onboarding for AVAX and MATIC through Wyre (#14683)
Bump @metamask/contract-metadata from 1.33.0 to 1.35.0 (#14791)
Slight cleanup of constants/transactions, useTransactionDisplayData, and TransactionIcon (#14784)
Migrate the "estimateGas" API call to "getFees" for STX (#14767)
Ignore advisory GHSA-wm7h-9275-46v2 (#14789)
Adding flag for MV3 (#14762)
Add types to send state (#14740)
Remove site origin on snap install (#14752)
Update design tokens library from 1.5 to 1.6 WIP (#14732)
Enables the "Safe Transaction From" copy for safeTransferFrom transactions (#14769)
remove draft transaction (#14701)
...
The phishing warning page URL environment variable has been renamed
from `PHISHING_PAGE_URL` to `PHISHING_WARNING_PAGE_URL`. We call this
page the "phishing warning page" everywhere else, and this name seemed
better suited (it's not a phishing page itself).
The variable has been listed and documented in `.metamaskrc.dist` as
well.
An externally hosted phishing warning page is now used rather than the
built-in phishing warning page.The phishing page warning URL is set via
configuration file or environment variable. The default URL is either
the expected production URL or `http://localhost:9999/` for e2e testing
environments.
The new external phishing page includes a design change when it is
loaded within an iframe. In that case it now shows a condensed message,
and prompts the user to open the full warning page in a new tab to see
more details or bypass the warning. This is to prevent a clickjacking
attack from safelisting a site without user consent.
The new external phishing page also includes a simple caching service
worker to ensure it continues to work offline (or if our hosting goes
offline), as long as the user has successfully loaded the page at least
once. We also load the page temporarily during the extension startup
process to trigger the service worker installation.
The old phishing page and all related lines have been removed. The
property `web_accessible_resources` has also been removed from the
manifest. The only entry apart from the phishing page was `inpage.js`,
and we don't need that to be web accessible anymore because we inject
the script inline into each page rather than loading the file directly.
New e2e tests have been added to cover more phishing warning page
functionality, including the "safelist" action and the "iframe" case.
* deprecate extensionizer for webextension-polyfill
* fix tests
* remove extensionizer
* fix browser windows api calls
* fix broken on firefox
* fix getAcceptLanguages call
* update more browser apis that are now promisified
* remove unnecessary console error ignoring in e2e tests
ESLint rules have been added to enforce our JSDoc conventions. These
rules were introduced by updating `@metamask/eslint-config` to v9.
Some of the rules have been disabled because the effort to fix all lint
errors was too high. It might be easiest to enable these rules one
directory at a time, or one rule at a time.
Most of the changes in this PR were a result of running
`yarn lint:fix`. There were a handful of manual changes that seemed
obvious and simple to make. Anything beyond that and the rule was left
disabled.
* Prevent automatic rejection of confirmations
Confirmations are now only automatically rejected if a user explicitly
closes the notification window. If we close the window programmatically
because there are no notifications left to show, nothing gets rejected.
This partially avoids a race condition where a confirmation gets
rejected automatically without the user having seen the confirmation
first. This could happen if the confirmation was processed just as the
notification window was being closed.
It's still possible for a confirmation that the user has never seen to
get rejected as a result of the user closing the window. But at least
now it's no longer possible for a confirmation to get rejected in this
manner after the user resolves the last confirmation in the queue.
* Fix bug that prevented automatic closure detection
All windows were being detected as explicit window closures,
essentially just as they were previously, because this variable was
cleared too soon.
* Re-open popup when necessary
After the window is automatically closed, a confirmation may have been
queued up while the window was closing. If so, the popup is now re-
opened.
# Permission System 2.0
## Background
This PR migrates the extension permission system to [the new `PermissionController`](https://github.com/MetaMask/snaps-skunkworks/tree/main/packages/controllers/src/permissions).
The original permission system, based on [`rpc-cap`](https://github.com/MetaMask/rpc-cap), introduced [`ZCAP-LD`](https://w3c-ccg.github.io/zcap-ld/)-like permissions to our JSON-RPC stack.
We used it to [implement](https://github.com/MetaMask/metamask-extension/pull/7004) what we called "LoginPerSite" in [version 7.7.0](https://github.com/MetaMask/metamask-extension/releases/tag/v7.7.0) of the extension, which enabled the user to choose which accounts, if any, should be exposed to each dapp.
While that was a worthwhile feature in and of itself, we wanted a permission _system_ in order to enable everything we are going to with Snaps.
Unfortunately, the original permission system was difficult to use, and necessitated the creation of the original `PermissionsController` (note the "s"), which was more or less a wrapper for `rpc-cap`.
With this PR, we shake off the yoke of the original permission system, in favor of the modular, self-contained, ergonomic, and more mature permission system 2.0.
Note that [the `PermissionController` readme](https://github.com/MetaMask/snaps-skunkworks/tree/main/packages/controllers/src/permissions/README.md) explains how the new permission system works.
The `PermissionController` and `SubjectMetadataController` are currently shipped via `@metamask/snap-controllers`. This is a temporary state of affairs, and we'll move them to `@metamask/controllers` once they've landed in prod.
## Changes in Detail
First, the changes in this PR are not as big as they seem. Roughly half of the additions in this PR are fixtures in the test for the new migration (number 68), and a significant portion of the remaining ~2500 lines are due to find-and-replace changes in other test fixtures and UI files.
- The extension `PermissionsController` has been deleted, and completely replaced with the new `PermissionController` from [`@metamask/snap-controllers`](https://www.npmjs.com/package/@metamask/snap-controllers).
- The original `PermissionsController` "domain metadata" functionality is now managed by the new `SubjectMetadataController`, also from [`@metamask/snap-controllers`](https://www.npmjs.com/package/@metamask/snap-controllers).
- The permission activity and history log controller has been renamed `PermissionLogController` and has its own top-level state key, but is otherwise functionally equivalent to the existing implementation.
- Migration number 68 has been added to account for the new state changes.
- The tests in `app/scripts/controllers/permissions` have been migrated from `mocha` to `jest`.
Reviewers should focus their attention on the following files:
- `app/scripts/`
- `metamask-controller.js`
- This is where most of the integration work for the new `PermissionController` occurs.
Some functions that were internal to the original controller were moved here.
- `controllers/permissions/`
- `selectors.js`
- These selectors are for `ControllerMessenger` selector subscriptions. The actual subscriptions occur in `metamask-controller.js`. See the `ControllerMessenger` implementation for details.
- `specifications.js`
- The caveat and permission specifications are required by the new `PermissionController`, and are used to specify the `eth_accounts` permission and its JSON-RPC method implementation.
See the `PermissionController` readme for details.
- `migrations/068.js`
- The new state should be cross-referenced with the controllers that manage it.
The accompanying tests should also be thoroughly reviewed.
Some files may appear new but have just moved and/or been renamed:
- `app/scripts/lib/rpc-method-middleware/handlers/request-accounts.js`
- This was previously implemented in `controllers/permissions/permissionsMethodMiddleware.js`.
- `test/mocks/permissions.js`
- A truncated version of `test/mocks/permission-controller.js`.
Co-authored-by: Mark Stacey <markjstacey@gmail.com>
A propType error was showing up during e2e tests with a `testDev`
build. It was caused by `process.env.IN_TEST` being treated as a
boolean, when in fact it is either the string `'true'` or a boolean.
`IN_TEST` has been updated to always be a boolean. `loose-envify` has
no trouble injecting boolean values, so there's no reason to treat this
as a string.
* Background clears confirmations on popup close
* [WIP] Remove clearing confirmations through UI
* Confirmations are now rejected instead of cleared
* Erased commented out code
* Fix linter errors
* Changes after code review
* Moved metrics events from onWindowUnload to background
* PR review fixes
* Added abillity to add reason to rejection of messages
* Fix prettier
* Added type metrics event to signature cancel
* Fix test
* The uncofirmed transactions are now cleared even if Metamask is locked
* bump @metamask/controllers to v15.0.1 and remove AbortController workaround in e2e tests
* remove old abortcontroller polyfill
* bump @metamask/controllers to v15.0.2
Adds the latest version of `@metamask/controllers`, and updates our usage of the `ApprovalController`, which has been migrated to `BaseControllerV2`. Of [the new `controllers` release](https://github.com/MetaMask/controllers/releases/tag/v15.0.0), only the `ApprovalController` migration should be breaking.
This is the first time we use events on the `ControllerMessenger` to update the badge, so I turned the messenger into a property on the main `MetaMaskController` in order to subscribe to events on it in `background.js`. I confirmed that the badge does indeed update during local QA.
As it turns out, [MetaMask/controllers#571](https://github.com/MetaMask/controllers/pull/571) was breaking for a single unit test case, which is now handled during setup and teardown for the related test suite (`metamask-controller.test.js`).
* Stop GasFeeController polling when pop closes
* Stop estimate gas polling on window unload
* lint + comments
* Improve client closed logic
* lint
* Add back _beforeUnload on unmount in gas-modal-page-container
* Add full check and call onClientClosed method for notifcation environment
* Add gas pollingToken tracking to appStateController and use to disconnect polling for each environment type
* remove unused method
* move controller manipulation logic from background.js to metamask-controller, disaggregate methods
* add beforeunload handling to reset gas polling tokens from root of send page
* cleanup, lint and address feedback
* clear appState gasPollingTokens when all instances of all env types are closed, fix pollingTokenType arg from onEnvironmentTypeClosed call in metamask-controller
* mock new methods to fix tests
* final bit of cleanup + comments
Co-authored-by: Dan Miller <danjm.com@gmail.com>
