* Automate the Flask release
A Flask release will now be published alongside each main extension
release. The version of each Flask release will be the same as the
extension version except it will have the suffix `-flask.0`.
* Programmatically remove build prefix
The create GH release Bash script derives the Flask version from the
Flask build filename by removing the build prefix, leaving just the
version. Rather than hard-coding the prefix size to remove, it is now
calculated programmatically so that it is easier to read and update.
* Fix tag publishing
The tab publishing step used the wrong credentials, and didn't properly
identify the commit author. This has now been fixed.
`improved-yarn-audit` has been updated so that it supports GitHub
advisories. Two new GitHub advisories have been ignored, as they are
both moderate RegExp DoS vulnerabilities that don't affect us, and they
are embedded deep within our dependency graph and are difficult to
update.
There are a few issues encountered when running `yarn setup` on new
Apple Silicon (aka M1, aka arm64) Macs:
* The script halts when attempting to run the install step for
the `chromedriver` package with the message "Only Mac 64 bits
supported". This is somewhat misleading as it seems to indicate that
chromedriver can only be installed on a 64-bit Mac. However, what I
think is happening is that the installation script for `chromedriver`
is not able to detect that an arm64 CPU *is* a 64-bit CPU. After
looking through the `chromedriver` repo, it appears that 87.0.1 is the
first version that adds a proper check ([1]).
Note that upgrading chromedriver caused the Chrome-specific tests to
fail intermittently on CI. I was not able to 100% work out the reason
for this, but ensuring that X (which provides a way for Chrome to run
in a GUI setting from the command line) is available seems to fix
these issues.
* The script also halts when attempting to run the install step for
the `electron` package. This happens because for the version of
`electron` we are using (9.4.2), there is no available binary for
arm64. It appears that Electron 11.x was the first version to support
arm64 Macs ([2]). This is a bit trickier to resolve because we don't
explicitly rely on `electron` — that's brought in by `react-devtools`.
The first version of `react-devtools` that relies on `electron` 11.x
is 4.11.0 ([3]).
[1]: 469dd0a6ee
[2]: https://www.electronjs.org/blog/apple-silicon
[3]: https://github.com/facebook/react/blob/main/packages/react-devtools/CHANGELOG.md#4110-april-9-2021
The version field is now stored in the main `package.json` file rather
than in the base manifest. It is built into the final manifest during
the build script.
This makes it easier to communicate what the current version should be
to our `auto-changelog` script. It's also generally a more conventional
place to keep track of the version, even considering that we're not
publishing to npm.
The check for the GITHUB_TOKEN environment variable was being done in
the wrong release script. It has been migrated to the relevant script.
A second check for the username has also been added, as it is also
required.
The changelog will now be automatically updated when a release branch
is created. A new release header along with changelog entries for any
new commits will be added.
Note that this changelog will still need to be manually cleaned up, but
it's one less manual step at least.
The old Bash script for adding a new release header to the changelog
has been removed, as that functionality is now built into the changelog
update script.
A new script has been added to commit any changes made to the manifest
and changelog. This step used to happen at the end of the bump manifest
version script, but now the changelog update relies upon the manifest
version bump happening first, so it needed to be re-ordered. The
changes should only be committed on the first run of the branch, as
it's contingent upon the manifest changing (due to the version bump).
Further changelog updates won't trigger new automatic commits.
The script responsible for creating the "Sync `master` with `develop`"
PR has been removed. We will soon be eliminating the need for a
`master` branch altogether, so we don't need this anymore. Also, this
script hasn't been running correctly in a long time. We've been
creating this PR manually.
New changelog release headers now omit the date. These headers are
added automatically when a new release branch is created, and that
rarely ends up being the actual date of the release, so these dates
have all been inaccurate anyway.
The date will be re-added to the changelog later as part of a new
script, after a release has been published.
The CI script to ensure no LavaMoat policy changes are required has
been failing despite there being no changes. It turns out that the
command used to check for changes (`git diff-index`) was failing
despite the lack of changes because the file was written again by
`yarn lavamoat:auto` but git hadn't gotten around to updating its index
since the write occurred, so it was considering it as changed until it
verified it wasn't [1].
The command has been replaced by `git diff --exit-code --quiet`, which
should do exactly the same thing except that it forces git to update
its internal cache to verify whether changes are present.
[1]: https://stackoverflow.com/questions/34807971/why-does-git-diff-index-head-result-change-for-touched-files-after-git-diff-or-g
A CI job has been added to ensure the `allow-scripts` config and the
LavaMoat auto-generated policy is up-to-date. This will only run on
release branches and the `master` branch, because it's too difficult a
requirement to meet for each PR for contributors on macOS, due to
differences in the dependency graph caused by optional dependencies.
The `allow-scripts` and LavaMoat policy have both been updated using
`yarn allow-scripts auto` and `yarn lavamoat:auto`.
The `.sh` file extension is now used for all Bash scripts. This ensures
the files are recognized as Bash scripts by the ShellCheck CI job, and
by editors/IDEs for improved syntax highlighting.
* use @lavamoat/allow-scripts for package postinstall allow list
* dnode: set "weak" to false
Co-authored-by: kumavis <kumavis@users.noreply.github.com>
Co-authored-by: Erik Marks <25517051+rekmarks@users.noreply.github.com>
Dependencies are now cached between builds, using a checksum of the
`yarn.lock` file as the cache key. The `node_modules` directory and the
`.har` file from the install are cached and restored, so that we ensure
the record of the install is always preserved alongside the
dependencies.
The consolidation of the `collect-har-artifact` script was to make it
easier to cache the `.har` file along with the dependencies.
The version bump script referenced the old file path for the manifest.
It was stored as a single file called `manifest.json`, but it was split
into `_base.json` and platform-specific manifests in #8140.
The manifest version bump script has been updated to reference
`_base.json`, which is the piece that has the version property.
* Cleanup beforeunload handler after transaction is resolved
The notification window was updated to reject transactions upon close
in #6340. A handler that rejects the transaction was added to
`window.onbeforeunload`, and it was cleared in `actions.js` if it was
confirmed or rejected.
However, the `onbeforeunload` handler remained uncleared if the
transaction was resolved in another window. This results in the
transaction being rejected when the notification window closes, even
long after the transaction is submitted and confirmed. This has been
the cause of many problems with the Firefox e2e tests.
Instead the `onbeforeunload` handler is cleared in the
`componentWillUnmount` lifecycle function, alongside where it's set in
the first place. This ensures that it's correctly unset regardless
of how the transaction was resolved, and it better matches user
expectations.
* Fix indentation and remove redundant export
The `run-all.sh` Bash script now uses consistent indentation, and is
consistent about only re-exporting the Ganache arguments when they
change.
* Ensure transactions are completed before checking balance
Various intermittent e2e test failures appear to be caused by React
re-rendering the transaction list during the test, as the transaction
goes from pending to confirmed. To avoid this race condition, the
transaction is now explicitly looked for in the confirmed transaction
list in each of the tests using this pattern.
* Enable all e2e tests on Firefox
The remaining tests that were disabled on Firefox now work correctly.
Only a few timing adjustments were needed.
* Update Firefox used in CI
Firefox v70 is now used on CI instead of v68. This necessitated
rewriting the function where the extension ID was obtained because the
Firefox extensions page was redesigned.
* ci - install deps - limit install scripts to those needed for build
* Update .circleci/scripts/deps-install.sh
Co-Authored-By: Mark Stacey <markjstacey@gmail.com>
* ci - install deps - expand install scripts needed for tests
* ci - install deps - expand install scripts needed for integration tests
* ci - install deps - fix node-sass script ref
* github - set codeowners for scripts/deps-install
* development - add utility to show deps with install scripts
* lint fix
* deps - move read-installed to devDeps
* ci - install deps with "--har" flag to capture network activity
* ci - add yarn install HAR logs to build-artifacts
* ci - yarn har - fix typo
* Update .circleci/scripts/collect-har-artifact.sh
Co-Authored-By: Mark Stacey <markjstacey@gmail.com>
* Publish GitHub release from master branch
This ensures that changes made on `develop` since branching for the
release are not included. It also ensures that the final release
sourcemaps line-up correctly (they were always build on master)`.
* Consolidate publish jobs
The jobs `job-publish-release` and `create_github_release` both handle
different parts of publishing a release. They have been consolidated
into a single `job-publish-release` job.
* Update release script to expect a merge commit
The release script was originally written to be run on `develop`, so it
expected the current commit to be a result of `Squash & Merge`. Now
that it's run on `master`, it will generally be run against a merge
commit.
The version is now extracted from the commit message using a regular
expression that should work on all version of Bash v3+, and should be
tolerant of both merge commits and `Squash & Merge` commits.
* Target `master` with release PR
`master` is now targeted by the release PR instead of `develop`, as
the release has to be created from the master branch.
The update to `develop` is handled after the release by a PR from
`master` to `develop`, which is created automatically after the
release.
As a solution to the constant lockfile churn issues we've had with
`npm`, the project now uses `yarn` to manage dependencies.
The `package-lock.json` file has been replaced with `yarn.lock`, which
was created using `yarn import`. It should approximate the contents of
`package-lock.json` fairly well, though there may be some changes due to
deduplication. The codeowners file has been updated to reference this
new lockfile.
All documentation and npm scripts have been updated to reference `yarn`
rather than `npm`. Note that running scripts using `npm run` still works
fine, but it seemed better to switch those to `yarn` as well to avoid
confusion.
The `npm-audit` Bash script has been replaced with `yarn-audit`. The
output of `yarn audit` is a bit different than `npm audit` in that it
returns a bitmask to describe which severity issues were found. This
made it simpler to check the results directly from the Bash script, so
the associated `npm-audit-check.js` script was no longer required. The
output should be exactly the same, and the information is still sourced
from the same place (the npm registry).
The new `yarn-audit` script does have an external dependency: `jq`.
However, `jq` is already assumed to be present by another CI script, and
is present on all CI images we use. `jq` was not added to `package.json`
as a dependency because there is no official package on the npm
registry, just wrapper scripts. We don't need it anywhere exept on CI
anyway.
The section in `CONTRIBUTING` about how to develop inside the
`node_modules` folder was removed, as the advice was a bit dated, and
wasn't specific to this project anyway.
The npm audit script was auditing all dependencies, then filtering the
results to just the advisories concerning production dependencies. This
was done by checking the boolean `dev` and `optional` properties of each
`findings` entry in each advisory.
The `dev` and `optional` properties are now missing, which is resulting
in dev advisories being mistakenly identified as affecting production.
This check has been removed, and instead the `--production` flag is used
when calling `npm audit`. This accomplishes the same goal without
relying as much upon the audit output format.
The `--production` flag was added in `npm` `v6.10.0`, so `npm` has been
updated to the current latest stable (`v6.10.2`) for the `test-deps`
job. It was also updated on the `prep-deps-npm` job to ensure
consistency in behaviour. The other jobs only use `npm run` which hasn't
changed substantially in some time, so compatibility isn't really a
concern for those.
`audit.json` has also been added to `.gitignore`. It was accidentally
checked in once while working on this branch.
* ci: Rename full_test to test_and_release
* ci: Add scripts to automate GH releases
* Add .bak files to .gitignore
* ci: Add reviewer to the auto version PR
