The driver now has a page navigation function that can navigate to any
of the three primary pages used in the extension. Additional pages and
support of paths can be added later as needed.
As of #7663, an in-memory store was used in place of local storage
during e2e tests, to facilitate the use of state fixtures. However,
this made it difficult to export state during a test run. The
instructions for exporting state to create fixtures assumed that local
storage was being used.
A new global function has been added to the background context to allow
exporting state. This method is available during testing and
development, and it works with either local storage or the in-memory
store. The fixture instructions have been updated to reference this new
function.
The signature request e2e tests were previously using ropsten. This
expectation was even hard-coded into the test contract dapp.
Instead the contract-dapp has been updated to use the current `chainId`
when calling `signTypedData` (falling back to the `networkId` if
`chainId` is not set). The fixture used by `signature-request` has been
updated to use ganache.
The switch case has been moved to a separate function so that the
initialization steps following the web driver instantiation could more
easily be deduplicated.
* Wait until element is clickable before clicking in e2e tests
A new `findClickableElement` has been added to the webdriver to allow
finding an element and blocking until it's both visible and enabled.
This is now used by the pre-existing `clickElement` method as well.
All cases where something is clicked in the e2e tests have been
updated to use one of these methods, to ensure we don't run into
intermittent failures when loading screens take longer than usual.
These rows on the Advanced Settings page were being looked up in the
e2e tests by the order they appeared in. Instead they're now referenced
by data id, so that we can add new settings and re-arrange them without
breaking the e2e tests.
The transaction navigation in the e2e tests has been made simpler with
the addition of data attributes to help with finding the navigation
buttons. Each button is now labelled according to its purpose.
* Specify type before parameter name
Various JSDoc `@param` entries were specified as `name {type}` rather
than `{type} name`.
A couple of `@return` entries have been given types as well.
* Use JSDoc optional syntax rather than Closure syntax
* Use @returns rather than @return
* Use consistent built-in type capitalization
Primitive types are lower-case, and Object is upper-case.
* Separate param/return description with a dash
The Selenium webdriver is difficult to use, and easy to misuse. To help
use the driver and make it easier to maintain our e2e tests, all driver
interactions are now performed via a `driver` module. This is basically
a wrapper class around the `selenium-webdriver` that exposes only the
methods we want to use directly, along with all of our helper methods.
These tests were updated in #7473 to navigate in a different order,
because the transaction order changed. Unfortunately this meant that
a second contract deployment was being confirmed, where it was
previously being rejected.
This updates the test to ensure the same transaction is rejected and
confirmed as prior to the change in #7473
The account details close button is difficult to click from the e2e
tests because it has a size of zero. The actual icon is added via CSS
as an `::after` pseudo-element.
The CSS has been adjusted to give the icon a size, and it the markup
is now a `button` rather than a `div`.
* Make gas estimate update on debounced token amount change, not just on blur after change
* Updated tests
* Ensure `updateGas` is bound early
Co-authored-by: Mark Stacey <markjstacey@gmail.com>
Typically the fullscreen UI will open upon installation, though this
behaviour was suppressed in development. This was dealt with in the e2e
tests by waiting for it to open, then closing it.
Instead this behaviour is now suppressed for test builds as well.
* Improve `openNewPage` helper function
The two delays were removed, and the window handle for the new page is
now returned. This was made possible with the new `newWindow` function
added in `v4.0.0-alpha.3` of `selenium-webdriver`.
* Replace recursion with loops
This should result in far more pleasant stack traces for any
exceptions in these functions. It might also be faster. These functions
seem easier to understand as loops as well.
* Remove unused string parameter
The `closeAllWindowHandlesExcept` function has been simplified by
removing a branch that handles the case where the `exceptions`
parameter given is a string. That parameter is never a string.
Update `selenium-webdriver` to v4.0.0-alpha.5. Despite the fact that
this version has "alpha" in the name, the maintainer of
`selenium-webdriver` has described this release as stable [1].
A few APIs were removed or changed in v4, which required changes to our
Firefox webdriver.
The port used for webdriver communication can now be specified
manually. This was required to ensure the threebox tests kept working,
because they used two different driver instances. This new version of
`selenium-webdriver` now uses the same port for each instance of the
webdriver (unlike the old version, which generated a new port for each
one), so it was necessary to manually specify the port to prevent the
same port from being used for both instances.
`chromedriver` required an update, as the version we were using was not
compatible with the new W3C WebDriver protocol. I've updated
`geckodriver` as well, just to bring it in line with the version of
Firefox we are using.
[1]: https://github.com/SeleniumHQ/selenium/issues/5617#issuecomment-373446249
* Add network store for testing
An alternative persistent state store has been created for use with e2e
tests. Instead of reading state from disk, it tries to load state from
a local fixture server running on port `12345` and serving state from
the path `/state.json`, and returns a blank state otherwise.
* Add e2e test fixture server
A fixture server has been added for serving background state, which the
background will read upon startup as part of restoring persisted state.
The `signature-request` e2e test has been updated to use a fixture to
bypass the registration step. The fixture used (`imported-account`) was
generated by pausing midway through that test run
* Add Get Accounts button
This button calls `eth_accounts`. This button is always enabled, even
when not connected.
* Disable account buttons by default
The buttons that require you to have first connected have been disabled
by default. Previously they would be enabled until the JavaScript
finished initializing the page, at which point they'd be disabled. This
resulted in a distracting flash as the page loaded and the buttons
changed.
The `signTypedData` button was added to the accounts button set as
well, rather than being left enabled regardless of connected status.
* Allow connect button to become re-enabled
The Connect button was broken previously in that after being disabled,
it would stay disabled even if the dapp lost access to MetaMask. The
button will now be enabled whenever not connected.
* Stringify signTypedData results
* Defer metamask onboarding bundle to speed up page load
The `ganache.js` helper module uses `ganache-core` to start `ganache`
instead of `ganache-cli`, and allows all of the same customization.
Using `ganache` programmatically from our e2e tests is much faster, as
we don't have to wait that arbitrary 5 seconds before each test as we
wait for `ganache-cli` to start up.
* add PermissionsController
remove provider approval controller
integrate rpc-cap
create PermissionsController
move provider approval functionality to permissions controller
add permissions approval ui, settings page
add permissions activity and history
move some functionality to metamask-inpage-provider
rename siteMetadata -> domainMetadata
add accountsChange notification to inpage provider
move functionality to inpage provider
update inpage provider
Remove 'Connections' settings page (#7369)
add hooks for exposing accounts in settings
rename unused messages in non-English locales
Add external extension id to metadata (#7396)
update inpage provider, rpc-cap
add eth_requestAccounts handling to background
prevent notifying connections if extension is locked
update inpage provider
Fix lint errors
add migration
review fixes
transaction controller review updates
removed unused messages
* Login Per Site UI (#7368)
* LoginPerSite original UI changes to keep
* First commit
* Get necessary connected tab info for redirect and icon display for permissioned sites
* Fix up designs and add missing features
* Some lint fixes
* More lint fixes
* Ensures the tx controller + tx-state-manager orders transactions in the order they are received
* Code cleanup for LoginPerSite-ui
* Update e2e tests to use new connection flow
* Fix display of connect screen and app header after login when connect request present
* Update metamask-responsive-ui.spec for new item in accounts dropdown
* Fix approve container by replacing approvedOrigins with domainMetaData
* Adds test/e2e/permissions.spec.js
* Correctly handle cancellation of a permissions request
* Redirect to home after disconnecting all sites / cancelling all permissions
* Fix display of site icons in menu
* Fix height of permissions page container
* Remove unused locale messages
* Set default values for openExternalTabs and tabIdOrigins in account-menu.container
* More code cleanup for LoginPerSite-ui
* Use extensions api to close tab in permissions-connect
* Remove unnecessary change in domIsReady() in contentscript
* Remove unnecessary private function markers and class methods (for background tab info) in metamask-controller.
* Adds getOriginOfCurrentTab selector
* Adds IconWithFallback component and substitutes for appropriate cases
* Add and utilize font mixins
* Remove unused method in disconnect-all.container.js
* Simplify buttonSizeLarge code in page-container-footer.component.js
* Add and utilize getAccountsWithLabels selector
* Remove console.log in ui/app/store/actions.js
* Change last connected time format to yyyy-M-d
* Fix css associated with IconWithFallback change
* Ensure tracked openNonMetamaskTabsIDs are correctly set to inactive on tab changes
* Code cleanup for LoginPerSite-ui
* Use reusable function for modifying openNonMetamaskTabsIDs in background.js
* Enables automatic switching to connected account when connected domain is open
* Prevent exploit of tabIdOriginMap in background.js
* Remove unneeded code from contentscript.js
* Simplify current tab origin and window opener logic using remotePort listener tabs.queryTabs
* Design and styling fixes for LoginPerSite-ui
* Fix permissionHistory and permission logging for eth_requestAccounts and eth_accounts
* Front end changes to support display of lastConnected time in connected and permissions screens
* Fix lint errors
* Refactor structure of permissionsHistory
* Fix default values and object modifications for domain and permissionsHistory related data
* Fix connecting to new accounts from modal
* Replace retweet.svg with connect-white.svg
* Fix signature-request.spec
* Update metamask-inpage-provider version
* Fix permissions e2e tests
* Remove unneeded delay from test/e2e/signature-request.spec.js
* Add delay before attempting to retrieve network id in dapp in ethereum-on=.spec
* Use requestAccountTabIds strategy for determining tab id that opened a given window
* Improve default values for permissions requests
* Add some message descriptions to app/_locales/en/messages.json
* Code clean up in permission controller
* Stopped deep cloning object in mapObjectValues
* Bump metamask-inpage-provider version
* Add missing description in app/_locales/en/messages.json
* Return promises from queryTabs and switchToTab of extension.js
* Remove unused getAllPermissions function
* Use default props in icon-with-fallback.component.js
* Stop passing to permissions controller
* Delete no longer used clear-approved-origins modal code
* Remove duplicate imports in ui/app/components/app/index.scss
* Use URL instead of regex in getOriginFromUrl()
* Add runtime error checking to platform, promise based extension.tab methods
* Support permission requests from external extensions
* Improve font size and colour of the domain origin on the permission confirmation screen
* Add support for toggling permissions
* Ensure getRenderablePermissionsDomains only returns domains with exposedAccount caveat permissions
* Remove unused code from LoginPerSite-ui branch
* Ensure modal closes on Enter press for new-account-modal.component.js
* Lint fix
* fixup! Login Per Site UI (#7368)
* Some code cleanup for LoginPerSite
* Adds UX for connecting to dapps via the connected sites screen (#7593)
* Adds UX for connecting to dapps via the connected sites screen
* Use openMetaMaskTabIds from background.js to determine if current active tab is MetaMask
* Delete unused permissions controller methods
* Fixes two small bugs in the LoginPerSite ui (#7595)
* Restore `providerRequest` message translations (#7600)
This message was removed, but it was replaced with a very similar
message called `likeToConnect`. The only difference is that the new
message has "MetaMask" in it. Preserving these messages without
"MetaMask" is probably better than deleting them, so these messages
have all been restored and renamed to `likeToConnect`.
* Login per site no sitemetadata fix (#7610)
* Support connected sites for which we have no site metadata.
* Change property containing subtitle info often populated by origin to a more accurate of purpose name
* Lint fix
* Improve disconnection modal messages (#7612)
* Improve disconnectAccountModalDescription and disconnectAllModalDescription messages
* Update disconnectAccountModalDescription app/_locales/en/messages.json
Co-Authored-By: Mark Stacey <markjstacey@gmail.com>
* Improve disconnectAccount modal message clarity
* Adds cancel button to the account selection screen of the permissions request flow (#7613)
* Fix eth_accounts permission language & selectability (#7614)
* fix eth_accounts language & selectability
* fix MetaMask capitalization in all messages
* Close sidebar when opening connected sites (#7611)
The 'Connected Sites' button in the accounts details now closes the
sidebar, if it is open. This was accomplished by pulling the click
handler for that button up to the wallet view component, where another
button already followed a similar pattern of closing the sidebar.
It seemed confusing to me that one handler was in the `AccountsDetails`
container component, and one was handed down from above, so I added
PropTypes to the container component.
I'm not sure that the WalletView component is the best place for this
logic, but I've put it there for now to be consistent with the add
token button.
* Reject permissions request upon tab close (#7618)
Permissions requests are now rejected when the page is closed. This
only applies to the full-screen view, as that is the view permission
requests should be handled in. The case where the user deals with the
request through a different view is handled in #7617
* Handle tab update failure (#7619)
`extension.tabs.update` can sometimes fail if the user interacts with
the tabs directly around the same time. The redirect flow has been
updated to ensure that the permissions tab is still closed in that
case. The user is on their own to find the dapp tab again in that case.
* Login per site tab popup fixes (#7617)
* Handle redirect in response to state update in permissions-connect
* Ensure origin is available to permissions-connect subcomponents during redirect
* Hide app bar whenever on redirect route
* Improvements to handling of redirects in permissions-connect
* Ensure permission request id change handling only happens when page is not null
* Lint fix
* Decouple confirm transaction screen from the selected address (#7622)
* Avoid race condtion that could prevent contextual account switching (#7623)
There was a race condition in the logic responsible for switching the
selected account based upon the active tab. It was asynchronously
querying the active tab, then assuming it had been retrieved later.
The active tab info itself was already in the redux store in another
spot, one that is guaranteed to be set before the UI renders. The
race condition was avoided by deleting the duplicate state, and using
the other active tab state.
* Only redirect back to dapp if current tab is active (#7621)
The "redirect back to dapp" behaviour can be disruptive when the
permissions connect tab is not active. The purpose of the redirect was
to maintain context between the dapp and the permissions request, but
if the user has already moved to another tab, that no longer applies.
* Fix JSX style lint errors
* Remove unused state
* Add support for one-click onboarding
MetaMask now allows sites to register as onboarding the user, so that
the user is redirected back to the initiating site after onboarding.
This is accomplished through the use of the `metamask-onboarding`
library and the MetaMask forwarder.
At the end of onboarding, a 'snackbar'-stype component will explain to the
user they are about to be moved back to the originating dapp, and it will
show the origin of that dapp. This is intended to help prevent phishing
attempts, as it highlights that a redirect is taking place to an untrusted
third party.
If the onboarding initiator tab is closed when onboarding is finished,
the user is redirected to the onboarding originator as a fallback.
Closes#6161
* Add onboarding button to contract test dapp
The `contract-test` dapp (run with `yarn dapp`, used in e2e tests) now
uses a `Connect` button instead of connecting automatically. This
button also serves as an onboarding button when a MetaMask installation
is not detected.
* Add new static server for test dapp
The `static-server` library we were using for the `contract-test` dapp
didn't allow referencing files outside the server root. This should
have been possible to work around using symlinks, but there was a bug
that resulted in symlinks crashing the server.
Instead it has been replaced with a simple static file server that
will serve paths starting with `node_modules` from the project root.
This will be useful in testing the onboarding library without vendoring
it.
* Add `@metamask/onboarding` and `@metamask/forwarder`
Both libraries used to test onboarding are now included as dev
dependencies, to help with testing. A few convenience scripts
were added to help with this (`yarn forwarder` and `yarn dapp-forwarder`)
The units for the amounts shown on the approve screen in the
transaction fee section were missing. It appears that they were present
in an early version of the approve screen (#7271) but they got lost
somewhere along the way.
* Redesign approve screen
* Add translations to approve screen components
* Show account in header of approve screen
* Use state prop bool for unlimited vs custom check in edit-approval-permission
* Set option to custom on input change in edit-approval-permission
* Allow setting of approval amount to unlimited in edit-approval-permission
* Fix height of confirm-approval popup
* Ensure decimals prop passted to confirm-approve.component is correct type
* Ensure first param passed to calcTokenValue in confirm-approve.util is the correct type
* Fix e2e test of permission editing
* Remove unused code from edit-approval-permission.container
* Cleanup beforeunload handler after transaction is resolved
The notification window was updated to reject transactions upon close
in #6340. A handler that rejects the transaction was added to
`window.onbeforeunload`, and it was cleared in `actions.js` if it was
confirmed or rejected.
However, the `onbeforeunload` handler remained uncleared if the
transaction was resolved in another window. This results in the
transaction being rejected when the notification window closes, even
long after the transaction is submitted and confirmed. This has been
the cause of many problems with the Firefox e2e tests.
Instead the `onbeforeunload` handler is cleared in the
`componentWillUnmount` lifecycle function, alongside where it's set in
the first place. This ensures that it's correctly unset regardless
of how the transaction was resolved, and it better matches user
expectations.
* Fix indentation and remove redundant export
The `run-all.sh` Bash script now uses consistent indentation, and is
consistent about only re-exporting the Ganache arguments when they
change.
* Ensure transactions are completed before checking balance
Various intermittent e2e test failures appear to be caused by React
re-rendering the transaction list during the test, as the transaction
goes from pending to confirmed. To avoid this race condition, the
transaction is now explicitly looked for in the confirmed transaction
list in each of the tests using this pattern.
* Enable all e2e tests on Firefox
The remaining tests that were disabled on Firefox now work correctly.
Only a few timing adjustments were needed.
* Update Firefox used in CI
Firefox v70 is now used on CI instead of v68. This necessitated
rewriting the function where the extension ID was obtained because the
Firefox extensions page was redesigned.
* Add a delay after connecting
This addresses an intermittent test failure where the MetaMask
Notification window cannot be found. It appears to be caused by the
Send button being clicked too soon after connecting to a dapp, before
the background has had a chance to process the approval. The premature
send is ignored and the window never appears.
This delay (2 seconds) should be sufficient time for the connection to
be processed. A later 5-second delay was also reduced to 2 seconds.
* Select onboarding buttons by button text
The onboarding buttons were being selected using the classname, which
was common to all onboarding buttons. This resulting in buttons being
selected just before a page transition, leading to an error about
the element reference being stale when a click was attempted.
The CSS class selectors have been replaced by text selectors, which
are more specific and shouldn't be at risk of resolving early. They're
also easier to read.
* Remove retypeSeedPhrase function
This function was used to re-type the seed phrase in the event that a
failure occurred when confirming the seed phrase. I'm not sure what
failure this was meant to address exactly, but this contingency hasn't
been needed for some time. We can tell that it hasn't been used because
it wasn't updated for the incremental account security changes, so it
couldn't have worked since then (it would have clicked the wrong
button).
* Use `AdvancedGasInputs` in `AdvancedTabContent`
The `AdvancedGasInputs` component was originally extracted from the
`AdvancedTabContent` component, duplicating much of the rendering
logic. They have since evolved separately, with bugs being fixed in one
place but not the other.
The inputs and outputs expected weren't exactly the same, as the
`AdvancedGasInputs` component converts the input custom gas price and
limit, and it converts them both in the setter methods as well.
The `GasModalPageContainer` had to be adjusted to avoid converting
these values multiple times.
Both components dealt with input debouncing separately, both in less
than ideal ways. `AdvancedTabContent` didn't debounce either field, but
it did debounce the check for whether the gas limit field was below the
minimum value. So if a less-than-minimum value was set, it would be
propogated upwards and could be saved if the user clicked 'Save'
quickly enough. After a second delay it would snap back to the minimum
value. The `AdvancedGasInputs` component debounced both fields, but
it would replace any gas limit below the minimum with the minimum
value. This led to a problem where a brief pause during typing would
reset the field to 21000.
The `AdvancedGasInputs` approach was chosen, except that it was
updated to no longer change the gas limit if it was below the minimum.
Instead it displays an error. Parent components were checked to ensure
they would detect the error case of the gas limit being set too low,
and prevent the form submission in those cases. Of the three parents,
one had already dealt with it correctly, one needed to convert the
gas limit from hex first, and another needed the gas limit check added.
Closes#6872
* Cleanup send components
Empty README files have been removed, and a mistake in the index file
for the send page has been corrected. The Gas Slider component class
name was updated as well; it looks like it was originally created from
`AdvancedTabContent`, so it still had that class name.
* Ensure correct transaction category when sending to contracts but there is no txParams data
* Update gas when pasting address in send
* Gracefully fall back is send.util/estimateGas when blockGasLimit from background is falsy
* Remove network request frontend fallback for blockGasLimit
* Add some needed slow downs to e2e tests
* Add UseNonce toggle
* Get the toggle actually working and dispatching
* Display nonce field on confirmation page
* Remove console.log
* Add placeholder
* Set customNonceValue
* Add nonce key/value to txParams
* remove customNonceValue from component state
* Use translation file and existing CSS class
* Use existing TextField component
* Remove console.log
* Fix lint nits
* Okay this sorta works?
* Move nonce toggle to advanced tab
* Set min to 0
* Wrap value in Number()
* Add customNonceMap
* Update custom nonce translation
* Update styles
* Reset CustomNonce
* Fix lint
* Get tests passing
* Add customNonceValue to defaults
* Fix test
* Fix comments
* Update tests
* Use camel case
* Ensure custom nonce can only be whole number
* Correct font size for custom nonce input
* UX improvements for custom nonce feature
* Fix advanced-tab-component tests for custom nonce changes
* Update title of nonce toggle in settings
* Remove unused locale message
* Cast custom nonce to string in confirm-transaction-base.component
* Handle string conversion and invalid values for custom nonces in handler
* Don't call getNonceLock in tx controller if there is a custom nonce
* Set nonce details for cases where nonce is customized
* Fix incorrectly use value for deciding whether to getnoncelock in approveTransaction
* Default nonceLock to empty object in approveTransaction
* Reapply use on nonceLock in cases where customNonceValue in approveTransaction.
* Show warning message if custom nonce is higher than MetaMask's next nonce
* Fix e2e test failure caused by custom nonce and 3box toggle conflict
* Update nonce warning message to include the suggested nonce
* Handle nextNonce comparison and update logic in lifecycle
* Default nonce field to suggested nonce
* Clear custom nonce on reject or confirm
* Fix bug where nonces are not shown in tx list on self sent transactions
* Ensure custom nonce is reset after tx is created in background
* Convert customNonceValue to number in approve tranasction controller
* Lint fix
* Call getNextNonce after updating custom nonce
* Delete unused code
* Run threebox imports through migrations
* Remove 3box feature flag
* Remove unnecessary use of 'type' in threebox._updatePlugin
* Fix threebox controller getLastUpdated
* Turn off threebox by default
* Rename restoredFromThreeBox to showRestorePrompt
* Remove accientally added method from threebox controller
* Restore from threebox on import from unlock screen
* Throw on non 404 errors from Box.getconfig in new3Box
* Adds threebox controller
* Adds threebox approval modal
* Fix unit tests and lint after addition of threebox
* Correct threebox behaviour after rejecting request for backup; fixes e2e tests.
* Update threebox controller for automatic syncing
* Ensure frontend locale updates when preferences are changed via direct update within controller
* Add toggle in settings for 3box syncing
* Update threebox controller for latest 3box version
* Delete unnecessary frontend changes for threebox integration
* Backing up address book contacts with threebox
* Update unit tests for 3box-integration additions
* Only enable threebox by default for new wallets
* Mock globals for correct unit tests
* 3box '1.10.2' -> '^1.10.2'
* Correct capilalization on 3Box
* Use log.debug instead of console.log in threebox controller
* Update yarn.lock
* Remove edge build
* Split 3box module into background deps js file
* extra bundle opts for bg-libs
* sync yarn.lock
* new3Box logic
* Show confirm threebox restore after import
* Remove bg-libs.js from manifest file for dev builds
* Switch 3Box controller to using the spaces api (instead of the profile api)
* Finalize switching to spaces api and only restoring from 3box after import
* Update metamask-controller-test.js for threebox controller changes
* Make threebox modal style consistent with others and update success button wording
* Use mock 3box when in test
* Correct 3box modal header
* Remove unnecessary property of threebox controller provider
* Remove unnecessary method calls after restoration from 3box in the threebox-restore-confirm modal.
* Replace setThreeBoxSyncingPermission calls in routes/index.js with turnThreeBoxSyncingOn
* Replace erroneous use of with
* Replace erroneous use of threeboxSyncing with threeBoxSyncingAllowed in advancted-tab directory
* Lint fixes for 3box changes
* Log errors encountered when updating 3Box
* Remove unnecessary parameter from state update
* Add timeout to initial 3Box sync
The initial 3Box sync will now timeout after 1 minute. If the timeout
is triggered, 3Box is disabled and cannot be re-enabled unless the
initial sync does finally finish. If it never finishes, 3Box cannot
be enabled unless the extension is reinstalled.
The Advanced Settings page was updated to show this option as disabled
in that circumstance, with a new discription explaining why it's
disabled. The UI here could certainly be improved.
Additionally, "on" and "off" labels were added to the toggle to match
the other toggles on the Advanced Settings page.
* Use non-minified 3Box module
We had previously used the minified 3Box module to avoid a build error
encountered when `envify` was processing the `libp2p` module (which is
used by 3Box). The build would fail because `esprima` (used by `envify`)
is incompatible with the object spread/rest operator (which is used in
`libp2p`).
That issue has been solved by adding a global Babelify transformation
specifically for transpiling out the object rest/spread operator from
dependencies. It has been targetted to only affect `libp2p` to avoid
extending the build time too much. This workaround can be used until
a new version of `esprima` is released that includes this bug fix.
* Use app key addresses for threebox
* Replace use of modal for confirming 3box restoration with a home notification
* Adds e2e tests for restoring from threebox
* Update eth-keyring-controller to 5.1.0
* Correct parameters passed to getAppKeyAddress in threebox.js
* Add prefix to origin passed to getAppKeyAddress in threebox.js
* Remove unused locale message.
* Prevent CORS errors in firefox e2e tests
* Ensure extraneous scripts are excluded from the local test dev build
* Move threeBoxLastUpdate state from home.component to redux
* Threebox PR code cleanup
* Always use first address when initializing threebox
* Replace setRestoredFromThreeBox api with setRestoredFromThreeBoxToFalse and setRestoredFromThreeBoxToTrue
* Update development/metamaskbot-build-announce.js to include ui-libs and bg-libs in hard coded bundle list
* Update test/e2e/threebox.spec.js to use new helpers added with pull #7144
* Make setFeatureFlag available on the ui window during testing
* Hide threebox feature behind a feature flag that can only be activated via dev console
* Remove unnecessary migration of threebox feature flag
* Prevent this.init() call in threebox constructor if feature flag is not turned on
* Prevent threebox notification from showing if feature flag is falsy
* http://localhost/8889 -> http://localhost/* in gulp manifest:testing tasks
* Make chainId available in the metamask-inpage-provider
* Update metamask-inpage-provider to 2.1.0
* Add e2e tests for ethereum.on events
* Move chainId constants to lib/enums.js
* Don't use new chainId enums in createInfuraClient
* Fix app/scripts/lib/select-chain-id.js
* Add missing test descriptions
* Fix async tests that expect a rejection
These tests expected the function under test to return a rejected
promise, and had assertions to be run in the `catch` clause. However,
the tests would still pass if the function didn't reject, with
the assertions never being run.
The tests have been updated to fail if the function doesn't throw.
* Handle ignored promise rejection
In the case where `forceUpdateMetamaskState` rejects, the function
`setSeedPhraseBackedUp` would never resolve. It has been updated to
pass along the rejection instead.
* Return after rejecting promise in action
A few actions would continue after encountering an error, resulting in
errors being compounded. Instead all actions will now return after
encountering an error (which it looks like was the intention in these
cases anyway).
This allows the environment variable `GANACHE_ARGS` to override the
default set of optional flags used. By default, the flag `--quiet` is
set. Setting `GANACHE_ARGS` will override the default.
For example, you can now run the e2e tests without the `--quiet` flag
by running this:
```bash
GANACHE_ARGS='' yarn test:e2e:chrome
```
This change also prevents the arguments from being needlessly repeated.
Previously this script accidentally build up `GANACHE_ARGS`, adding to
the set of flags used with each change in arguments.
This PR is based upon #6870
* Open backup challenge screen, prompted from notification, in browser window
* Remove no longer used showingSeedPhraseBackupAfterOnboarding related code
* Make incremental-security.spec.js click through the seed phrase success screen
* Fix address book name saving and ens input errors on good inputs on unsupported networks
* Add initial e2e test for address book send flow.
* No longer need to click recipient row in e2e tests
* Click write button in address book e2e test on seed confirm screen
* Use correct seed phrase and private key in address-book.spec tests
* Replace use of backup-notification with use of home notification
* Pin notifications relative to window
* Remove unneeded isRequired condition on some home.component properties
* Refactor rendering of home notifications
* UX for multiple notifications
* Adds dismissal to provider request notification.
* Fix test failures
The e2e tests have been updated to reference `home-notification`
classnames instead of the removed `background-notification`. The
active tab proptypes and default values were updated as well.
* Implements ability to defer seed phrase backup to later
* Adds incremental-security.spec.js, including test dapp that sends signed tx with stand alone localhost provider
* Update metamask-responsive-ui for incremental account security changes
* Update backup-notification style and fix responsiveness of seed phrase screen
* Remove uneeded files from send-eth-with-private-key-test/
* Apply linguist flags in .gitattributes for send-eth-with-private-key-test/ethereumjs-tx.js
* Improve docs in controllers/onboarding.js
* Clean up metamask-extension/test/e2e/send-eth-with-private-key-test/index.html
* Remove unnecessary newlines in a couple first-time-flow/ files
* Fix import of backup-notification in home.component
* Fix git attrs file
* Style Send Header
* Move Send to-row to send view and restyle
* Add "Recents" group to select recipient view
* Rename SendToRow to AddRecipient
* Basic UI and Layout
* New ENSInput component
* wip - fuzzy search for input
* small refactor
* Add Dialog
* contact list initial
* initial error on invalid address
* clean up edit
* Click to open modal
* Create AddToAddressBookModal component
* Modal styling and layout
* modal i18n
* Add to Addressbook
* ens wip
* ens wip
* ENS Resolution
* Reset input
* Send to explicit address
* Happy Path Complete
* Add back error checking
* Reset send-to when emptying input
* Add back warning object
* Fix linter
* Fix unit test #1 - fix import paths
* Remove dead tests
* One more to go
* Fix all unit tests
* add unit test for reducers and actions
* test rendering AddRecipient
* Add tests for dialog boxes in AddRecipient
* Add test for validating
* Fix linter
* Fix e2e tests
* Token send e2e fix
* Style View Contact
* Style edit-contact
* Fix e2e
* Fix from-import-beta-ui e2e spec
* Make section header say "add recipient” by default
* Auto-focus add recipient input
* Update placeholder text
* Update input title font size
* Auto advance to next step if user paste a valid address
* Ellipsify address when recipient is selected
* Fix app header background color on desktop
* Give each form row a margin of 16px
* Use .container/.component naming pattern for ens-input
* Auto-focus on input when add to addressbook modal is opened; Save on Enter
* Fix and add unit test
* Fix selectors name in e2e tests
* Correct e2e test token amount for address-book-send changes
* Adds e2e test for editing a transaction
* Delete test/integration/lib/send-new-ui.js
* Add tests for amount max button and high value error on send screen to test/e2e/metamask-ui.spec.js
* lint and revert to address as object keys
* add chainId based on current network to address book entry
* fix test
* only display contacts for the current network
* Improve ENS message when not found on current network
* Add error to indicate when network does not support ENS
* bump gaba
* address book, resolve comments
* Move contact-list to its own component
* De-duplicate getaddressbook selector and refactor name selection logic in contact-list-tab/
* Use contact-list component in contact-list-tab.component (i.e. in settings)
* Improve/fix settings headers for popup and browser views
* Lint fixes related to address book updates
* Add 'My accounts' page to settings address book
* Update add new contact button in settings to match floating circular design
* Improve styles of view contact page
* Improve styles and labels of the add-contact.component
* Further lint fixes related to address book updates
* Update unit tests as per address book updates
* Ensure that contact list groups are sorted alphabetically
* Refactor settings component to use a container for connection to redux; allow display of addressbook name in settings header
* Decouple ens-input.component from send context
* Add ens resolution to add contact screen in settings
* Switching networks when an ens address is shown on send form removes the ens address.
* Resolve send screen search for ensAddress to matching address book entry if it exists
* Show resolved ens icon and address if exists (settings: add-contact.component)
* Make the displayed and copied address in view-contact.component the checksummed address
* Default alias state prop in AddToAddressBookModal to empty string
* Use keyCode to detect enter key in AddToAddressBookModal
* Ensure add-contact component properly updates after QR code detection
* Fix display of all recents after clicking 'Load More' in contact list
* Fix send screen contact searching after network switching
* Code cleanup related to address book changes
* Update unit tests for address book changes
* Update ENS name not found on network message
* Add ens registration error message
* Cancel on edit mode takes user back to view screen
* Adds support for memo to settings contact list view and edit screens
* Modify designs of edit and view contact in popup environment
* Update settings content list UX to show split columns in fullscreen and proper internal navigation
* Correct background address book API usages in UI
As a solution to the constant lockfile churn issues we've had with
`npm`, the project now uses `yarn` to manage dependencies.
The `package-lock.json` file has been replaced with `yarn.lock`, which
was created using `yarn import`. It should approximate the contents of
`package-lock.json` fairly well, though there may be some changes due to
deduplication. The codeowners file has been updated to reference this
new lockfile.
All documentation and npm scripts have been updated to reference `yarn`
rather than `npm`. Note that running scripts using `npm run` still works
fine, but it seemed better to switch those to `yarn` as well to avoid
confusion.
The `npm-audit` Bash script has been replaced with `yarn-audit`. The
output of `yarn audit` is a bit different than `npm audit` in that it
returns a bitmask to describe which severity issues were found. This
made it simpler to check the results directly from the Bash script, so
the associated `npm-audit-check.js` script was no longer required. The
output should be exactly the same, and the information is still sourced
from the same place (the npm registry).
The new `yarn-audit` script does have an external dependency: `jq`.
However, `jq` is already assumed to be present by another CI script, and
is present on all CI images we use. `jq` was not added to `package.json`
as a dependency because there is no official package on the npm
registry, just wrapper scripts. We don't need it anywhere exept on CI
anyway.
The section in `CONTRIBUTING` about how to develop inside the
`node_modules` folder was removed, as the advice was a bit dated, and
wasn't specific to this project anyway.
The Drizzle tests have not been used for some time. They were used to
ensure compatibility with newer versions of `web3` v1. If we want to
re-add tests to ensure compatibility with newer `web3` versions, we
should find some way of doing that more reliably than was done here -
these tests were somewhat flaky and unreliable.
* Add loading spinner to pending tx status label.
* Add border around account icon in top right
* Change style of settings toggle buttons; wrap with local components
* Eliminate large space after settings labels when no description
* Remove network form from advanced tab of settings
* Keep new account container height to contents when in full screen
* Introduce delay for eth_estimateGas calls with in test
* Add test that fails when gas estimates of contract method calls without gas are too high.
* Get transaction gas data from unApprovedTxs instead of confirmTransaction
* Fix selection of gas data in gas-modal-page-container.container
* Lint changes related to Version-6.7.2-gasLimitFix
* Fix e2e tests on Version-6.7.2-gasLimitFix
* Fix unit and integration tests for changes from Version-6.7.2-gasLimitFix
* more e2e fixes
* Add assertions for transaction values on confirm screen
* Fix display of transaction amount on confirm screen.
* Set a default value for code in _determineTransactionCategory
* Adds e2e tests that fail when token txs without gas param are not properly handled.
* Adds unit tests for _determineTransactionCategory
* Base error throwing and simple gas setting in estimateTxGas on transactionCategory
* Add networks tab to settings, with header.
* Adds network list to settings network tab.
* Adds form to settings networks tab and connects it to network list.
* Network tab: form adding and editing working
* Settings network form properly handles input errors
* Add translations for settings network form
* Clean up styles of settings network tab.
* Add popup-view styles and behaviour to settings network tab.
* Fix save button on settings network form
* Adds 'Add Network' button and addMode to settings networks tab
* Lint fix for settings networks tab addition
* Fix navigation in settings networks tab.
* Editing an rpcurl in networks tab does not create new network, just changes rpc of old
* Fix layout of settings tabs other than network
* Networks dropdown 'Custom Rpc' item links to networks tab in settings.
* Update settings sidebar networks subheader.
* Make networks tab buttons width consistent with input widths in extension view.
* Fix settings screen subheader height in popup view
* Fix height of add networks button in popup view
* Add optional label to chainId and symbol form labels in networks setting tab
* Style fixes for networks tab headers
* Add ability to customize block explorer used by custom rpc
* Stylistic improvements+fixes to custom rpc form.
* Hide cancel button.
* Highlight and show network form of provider by default.
* Standardize network subheader name to 'Networks'
* Update e2e tests for new settings network form
* Update unit tests for new rpcPrefs prop
* Extract blockexplorer url construction into method.
* Fix broken styles on non-network tabs in popup mode
* Fix block explorer url links for cases when provider in state has not been updated.
* Fix vertical spacing of network form
* Don't allow click of save button on network form if nothing has changed
* Ensure add network button is shown in popup view
* Lint fix for networks tab
* Fix block explorer url preference setting.
* Fix e2e tests for custom blockexplorer in account details modal changes.
* Update integration test states to include frequentRpcList property
* Fix some capitalizations in en/messages.json
* Remove some console.logs added during custom rpc form work
* Fix external account link text and url for modal and dropdown.
* Documentation, url validation, proptype required additions and lint fixes on network tab and form.
* eslint: Check for unused function arguments
* eslint: Ignore unused '_' in argument list
Also allow any number of '_' e.g., '__' or '___' which is to be used sparingly
* Remove and rename unused arguments
* schema added
* ui for the dapp added and schema.js changed according to the comments in PR
* added tests for all web3 methods
* Update run-all.sh
* Update web3.spec.js to work with new onboarding flow
* changes made according to the comments
* Create stand alone script for web3 e2e tests.
* Lint fixes for web3 e2e tests.
* getMethodData() default to abi decoded method if registry lookup errors
* Update e2e tests to work with getMethodData() fallback changes
* Remove indeterminency in gas input key entering in send token e2e test.
* Add metametrics provider and util.
* Add backend api and state for participating in metametrics.
* Add frontend action for participating in metametrics.
* Add metametrics opt-in screen.
* Add metametrics events to first time flow.
* Add metametrics events for route changes
* Add metametrics events for send and confirm screens
* Add metametrics events to dropdowns, transactions, log in and out, settings, sig requests and main screen
* Ensures each log in is measured as a new visit by metametrics.
* Ensure metametrics is called with an empty string for dimensions params if specified
* Adds opt in metametrics modal after unlock for existing users
* Adds settings page toggle for opting in and out of MetaMetrics
* Switch metametrics dimensions to page level scope
* Lint, test and translation fixes for metametrics.
* Update design for metametrics opt-in screen
* Complete responsive styling of metametrics-opt-in modal
* Use new chart image on metrics opt in screens
* Incorporate the metametrics opt-in screen into the new onboarding flow
* Update e2e tests to accomodate metametrics changes
* Mock out metametrics network requests in integration tests
* Fix tx-list integration test to support metametrics provider.
* Send number of tokens and accounts data with every metametrics event.
* Update metametrics event descriptor schema and add new events.
* Fix import tos bug and send gas button bug due to metametrics changes.
* Various small fixes on the metametrics branch.
* Add origin custom variable type to metametrics.util
* Fix names of onboarding complete actions (metametrics).
* Fix names of Metrics Options actions (metametrics).
* Clean up code related to metametrics.
* Fix bad merge conflict resolution and improve promise handling in sendMetaMetrics event and confrim tx base
* Don't send a second metrics event if user has gone back during first time flow.
* Collect metametrics on going back from onboarding create/import.
* Add missing custom variable constants for metametrics
* Fix metametrics provider
* Make height of opt-in modal responsive.
* Adjust text content for opt-in modal.
* Update metametrics event names and clean up code in opt-in-modal
* Put phishing warning step next to last in onboarding flow
* Link terms of service on create and import screens of first time flow
* Add subtext to options on the onboarding select action screen.
* Fix styling of bullet points on end of onboarding screen.
* Combine phishing warning and congratulations screens.
* Fix placement of users if unlocking after an incomplete onboarding import flow.
* Fix capitalization in opt-in screen
* Fix last onboarding screen translations
* Add link to 'Learn More' on the last screen of onboarding
* Code clean up: metametrics branch
* Update e2e tests for phishing warning step removal
* e2e tests passing on metametrics branch
* Different tracking urls for metametrics on development and prod
* Action select step of onboarding flow added.
* Update navigation on create and import password screens.
* Adds terms of service checkbox to create and import account screens.
* Add security warning to jazzicon intro step
* Update and streamline unique image to confirm seed steps of first time flow.
* UI touch ups to welcome screen.
* UI touch up on select action page
* Fix first time import flow.
* Add end of flow screen to first time flow
* Replace unique image screen with updated fishing warning screen.
* Update e2e tests for onboarding flow changes.
* Add required translations to onboarding flow.
* Update design of select action screen to emphasize create new wallet option.
* Clean up onboarding flow code.
* Remove notice related code from first-time-flow directory.
* Use updater function argument in new-account.component
