The `network` store of the network controller crams two types of data
into one place. It roughly tracks whether we have enough information to
make requests to the network and whether the network is capable of
receiving requests, but it also stores the ID of the network (as
obtained via `net_version`).
Generally we shouldn't be using the network ID for anything, as it has
been completely replaced by chain ID, which all custom RPC endpoints
have been required to support for over a year now. However, as the
network ID is used in various places within the extension codebase,
removing it entirely would be a non-trivial effort. So, minimally, this
commit splits `network` into two stores: `networkId` and
`networkStatus`. But it also expands the concept of network status.
Previously, the network was in one of two states: "loading" and
"not-loading". But now it can be in one of four states:
- `available`: The network is able to receive and respond to requests.
- `unavailable`: The network is not able to receive and respond to
requests for unknown reasons.
- `blocked`: The network is actively blocking requests based on the
user's geolocation. (This is specific to Infura.)
- `unknown`: We don't know whether the network can receive and respond
to requests, either because we haven't checked or we tried to check
and were unsuccessful.
This commit also changes how the network status is determined —
specifically, how many requests are used to determine that status, when
they occur, and whether they are awaited. Previously, the network
controller would make 2 to 3 requests during the course of running
`lookupNetwork`.
* First, if it was an Infura network, it would make a request for
`eth_blockNumber` to determine whether Infura was blocking requests or
not, then emit an appropriate event. This operation was not awaited.
* Then, regardless of the network, it would fetch the network ID via
`net_version`. This operation was awaited.
* Finally, regardless of the network, it would fetch the latest block
via `eth_getBlockByNumber`, then use the result to determine whether
the network supported EIP-1559. This operation was awaited.
Now:
* One fewer request is made, specifically `eth_blockNumber`, as we don't
need to make an extra request to determine whether Infura is blocking
requests; we can reuse `eth_getBlockByNumber`;
* All requests are awaited, which makes `lookupNetwork` run fully
in-band instead of partially out-of-band; and
* Both requests for `net_version` and `eth_getBlockByNumber` are
performed in parallel to make `lookupNetwork` run slightly faster.
The `HardwareKeyringTypes` constant has been renamed to `KeyringTypes`
and moved to a separate constants module, to reflect that it contains
more than just hardware wallet keyring types. This corrects a mistake
made recently during a TypeScript conversion.
* feat: disable deposit popover and replace it with global redirect to onramp on pdapp
* feat: remove legacy code for hardcoded onramp providers
* fix: remove unused visuals and components related to legacy code of deposit popover
* fix: remove unused messages
* feat: use a custom hook for all onramps related methods and variables
* fix: modify the custom hook implementation to include test networks
* fix: remove deprecated file buy-url
* fix: remove references for deleted deposit logos
* fix: network-controller failing unit test
* fix: snapshot loading-swaps-quotes-stories-metadata.test.js.snap
* fix: storybook tests
* fix: remove unused constatns related to buyable onramp chains
* fix: remove unused variables and fix eslint
* adding unit test for useRamps custom hook
* feat: add comment on the proper usage of useRamps within confirm-page-container component
* fix: add unit tests for buy button in token-overview page
* fix: add unit test for open the buy crypto URL for a buyable chain ID in token page
* feat: add unit test coverage for eth-overview page
* fix: update locales
* feat: add desktop enable button component
This component will be added
to the experimental page. Users
will then be able to initialize
a desktop connection
* feat: add desktop pairing page
* feat: add desktop deep-linking shared lib
* test: add initial entries to render helper
Allow specifying initialEntries for
MemoryRouter. This change will allow
testing pages that use the useParam
hook.
* feat: add desktop error page
Error page for any desktop pairing
related issue
* feat: add desktop routes to route component
* feat: add enable desktop button to experimental tab
* feat: add desktop icon when paired in dev mode
* feat: disable ledger live control when desktop enabled
* feat: register desktop error actions on ui init
* fix: add missing code fencing
* chore: remove enable desktop rpc middleware
Now that we are adding the UI
there's no need for this rpc middleware
(as it was used to test desktop background
code)
* fix: display experimental tab for desktop
* Adding browser outdated notification
* updating dependency
* adding unit tests for util function
* adding unit tests for selectors, lintfix
* Added Tests, refactored notification delay logic
* lint:fix
* adding test coverage for method parameter
* Update app/scripts/controllers/app-state.js
adding documentation details
Co-authored-by: Mark Stacey <markjstacey@gmail.com>
* moving declaration into test
* Update app/scripts/controllers/app-state.test.js
spacing in test file
Co-authored-by: Mark Stacey <markjstacey@gmail.com>
* Update jest.config.js
removing duplicate entries
Co-authored-by: Mark Stacey <markjstacey@gmail.com>
* using async submitRequestToBackground method
* removing unused import
* removing unnecessary link syntax in notification
* adding opera and edge and associated tests
* handling the undefined case in bowser.satisfies
* setOutdatedBrowserWarningLastShown try/catch
* lint:fix
* Removing try/catch and letting errors bubble up
Removing deprecated displayWarning method
Co-authored-by: Mark Stacey <markjstacey@gmail.com>
* taking out forceMetamaskUpdateState call
* excludint app-state test from mocha test suite
* Added note: Jest files should match Mocha excluded
* syntax error, lint:fix
---------
Co-authored-by: Mark Stacey <markjstacey@gmail.com>
* Add beta home banner to home screen
* Move the beta home notification to the app-header
* Updates to formatting
* Add beta home banner to home screen
* Move the beta home notification to the app-header
* Updates to formatting
* Update ui/components/app/app-header/index.scss
Co-authored-by: George Marshall <george.marshall@consensys.net>
* Update ui/components/app/app-header/index.scss
Co-authored-by: George Marshall <george.marshall@consensys.net>
* Update ui/components/app/app-header/index.scss
Co-authored-by: George Marshall <george.marshall@consensys.net>
* Move banner to top of page
* Move to own folder, update styles
* Swith to BOX component
* Address feedback
* Add tests
* Update name of component
* Fix tests
* Fix proptype errors
* Fixups
* Remove unrelated changes
* Remove unwanted string changes
* Update beta component name and text
* Update mock data
Co-authored-by: George Marshall <george.marshall@consensys.net>
The controllers package has been updated to v33. The only breaking
change in this release was to rename the term "collectible" to "NFT"
wherever it appeared in the API.
Changes in this PR have been kept minimal; additional renaming can be
done in separate PRs. This PR only updates the controller names,
controller state, controller methods, and any direct references to
these things. NFTs are still called "collectibles" in most places.
* Replaced addresses by the address component on SignTypedData v4 signatures
* Fixing signature-request e2e tests
* Modified scss file for signature-request message
* Using address component for rendering the addresses and bold label where hex address is not valid
* Modify the address component
* Added proper BEM syntax for class names and used Box and Typography
* FIxing e2e tests
* Commited requested changes from George and added storybook
* Review requested changes
* Created new component for rendering data in signature-request-message.js
* Fixing proper usage for getAccountName and getMetadataContractName selectors
* Fixing e2e tests
* Remove 3box feature and delete ThreeBoxController
Lint locale messages
lavamoat policy updates
* Restore 3Box user trait with value `false`
The 3Box user trait has been restored and hard-coded as `false`. This
ensures that users don't get stuck in our metrics as having this trait.
A deprecation comment has been left in various places for this trait.
* Remove unused state
* Remove additional 3box-related things
* Run `yarn-deduplicate`
* Restore migration that was lost while rebasing
* Remove obsolete override
* Remove additional unused resolutions/dependencies
* Update LavaMoat policies
* Remove obsolete security advisory ignore entries
* Remove 3Box fixture builder method
* Update unit tests
Co-authored-by: Mark Stacey <markjstacey@gmail.com>
* Reduce the amount of calls to insight snaps
* Add dep
* Update LavaMoat policies
* Fix selectors and revert changes to hook
* Remove dep
* Revert "Update LavaMoat policies"
This reverts commit 7469c94e0e7c52eb877766a96005cc559c9d8d20.
* Enable "Add Popular Network" feature by default
* Fixing e2e tests
* Attempt to fix e2e tests
* Revert "Attempt to fix e2e tests"
This reverts commit d88e8944b8df8f7c3075753f8d8b3480439f8e30.
* Get e2e tests passing
Co-authored-by: Dan J Miller <danjm.com@gmail.com>
* Ensure the seed phrase reminder is displayed with precedence over the network deprecation message
* Prevent error when attempting to get balance before account info has been fully sete
* Fix implementation of seedphrase-reminder-display-fix
* Prioritize seed phrase reminder notification over portfolio tooltip, and that tooltip over testnet deprecation
* Show 3box deprecation message in whats new
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
* Add . after message
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
* Change deprecation notification message and remove date
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
* addding the legacy tokenlist, tuning token detection OFF by default, adding new message while importing tokens
updating the controller version and calling detectNewToken on network change
fixing rebase error
Run yarn lavamoat:auto for updating policies
updating lavamoat
Deleted node modules and run again lavamoat auto
fixing rebase issues
updating lavamoat policies
updating lavamoat after rebasing
policies
updating custom token warning and blocking detectedtoken link when tpken detection is off for supported networks
to update the token in fetchTosync
updating the contract map object
Revert build-system lavamoat policy changes
Move token list selection logic from components to getTokenList selector
updating the tokenList
Update lavamoat
Fix error
updating lavamoat
lint fix
fix unit test fail
fix unit test fail
lint fix
fixing rebase locale error
rebase fix
Revert build-system policy changes
temp
addressing review comments
* rebase fix
* Created a logic for the 'Add a block explorer URL'
Removed unused message
Message logic rollback
Modified history push operation
WIP: Pushing before rebasing
Applied requested changes
Removed unintenionally added code
* Lint fix
* Metrics fixed
* The contact pet name isn't replaced by the recipients address
* Create getEnsResolutionByAddress selector and use it in the codebase
* Modified the getRecipient selector such that it returns an ens resolution as the nickname if a nickname isn't present but a ens resolution is.
* Update ui/ducks/send/send.js
Co-authored-by: Brad Decker <bhdecker84@gmail.com>
* Checked if ens resolution is present in the getRecipient selector
Co-authored-by: Brad Decker <bhdecker84@gmail.com>
* Rename NotificationController to AnnouncementController
* Fix test
* Add test for missing NotificationController state
* Bump controllers
* Move test to correct file
* Rename config key
* Add migration 71 to list of migrations
* Fix selector after migration
* Show fiat on confirm screen on multilayer-fee network
* Disable gas editing on optimism
* Fix send max mode on optimism
* Represent layer 2 gas fee as a single value
* Hide gas fee edit UI on optimism
* Improvement multilayer-fee-message styling
* Lint fix
* Fix locales
* Remove unnecessary code change
Co-authored-by: David Walsh <davidwalsh83@gmail.com>
This PR adds `snaps` under Flask build flags to the extension. This branch is mostly equivalent to the current production version of Flask, excepting some bug fixes and tweaks.
Closes#11626
ESLint rules have been added to enforce our JSDoc conventions. These
rules were introduced by updating `@metamask/eslint-config` to v9.
Some of the rules have been disabled because the effort to fix all lint
errors was too high. It might be easiest to enable these rules one
directory at a time, or one rule at a time.
Most of the changes in this PR were a result of running
`yarn lint:fix`. There were a handful of manual changes that seemed
obvious and simple to make. Anything beyond that and the rule was left
disabled.
The ESLint config for the extension explicitly includes support for
Prettier. However, this is already being provided by our global ESLint
config (`@metamask/eslint-config`). Therefore there is no need to
include it here. In fact, this is causing weird issues where the `curly`
option is getting overridden somehow. After this change, these syntaxes
are invalid:
``` javascript
if (foo) return;
```
``` javascript
if (foo) return 'bar';
```
# Permission System 2.0
## Background
This PR migrates the extension permission system to [the new `PermissionController`](https://github.com/MetaMask/snaps-skunkworks/tree/main/packages/controllers/src/permissions).
The original permission system, based on [`rpc-cap`](https://github.com/MetaMask/rpc-cap), introduced [`ZCAP-LD`](https://w3c-ccg.github.io/zcap-ld/)-like permissions to our JSON-RPC stack.
We used it to [implement](https://github.com/MetaMask/metamask-extension/pull/7004) what we called "LoginPerSite" in [version 7.7.0](https://github.com/MetaMask/metamask-extension/releases/tag/v7.7.0) of the extension, which enabled the user to choose which accounts, if any, should be exposed to each dapp.
While that was a worthwhile feature in and of itself, we wanted a permission _system_ in order to enable everything we are going to with Snaps.
Unfortunately, the original permission system was difficult to use, and necessitated the creation of the original `PermissionsController` (note the "s"), which was more or less a wrapper for `rpc-cap`.
With this PR, we shake off the yoke of the original permission system, in favor of the modular, self-contained, ergonomic, and more mature permission system 2.0.
Note that [the `PermissionController` readme](https://github.com/MetaMask/snaps-skunkworks/tree/main/packages/controllers/src/permissions/README.md) explains how the new permission system works.
The `PermissionController` and `SubjectMetadataController` are currently shipped via `@metamask/snap-controllers`. This is a temporary state of affairs, and we'll move them to `@metamask/controllers` once they've landed in prod.
## Changes in Detail
First, the changes in this PR are not as big as they seem. Roughly half of the additions in this PR are fixtures in the test for the new migration (number 68), and a significant portion of the remaining ~2500 lines are due to find-and-replace changes in other test fixtures and UI files.
- The extension `PermissionsController` has been deleted, and completely replaced with the new `PermissionController` from [`@metamask/snap-controllers`](https://www.npmjs.com/package/@metamask/snap-controllers).
- The original `PermissionsController` "domain metadata" functionality is now managed by the new `SubjectMetadataController`, also from [`@metamask/snap-controllers`](https://www.npmjs.com/package/@metamask/snap-controllers).
- The permission activity and history log controller has been renamed `PermissionLogController` and has its own top-level state key, but is otherwise functionally equivalent to the existing implementation.
- Migration number 68 has been added to account for the new state changes.
- The tests in `app/scripts/controllers/permissions` have been migrated from `mocha` to `jest`.
Reviewers should focus their attention on the following files:
- `app/scripts/`
- `metamask-controller.js`
- This is where most of the integration work for the new `PermissionController` occurs.
Some functions that were internal to the original controller were moved here.
- `controllers/permissions/`
- `selectors.js`
- These selectors are for `ControllerMessenger` selector subscriptions. The actual subscriptions occur in `metamask-controller.js`. See the `ControllerMessenger` implementation for details.
- `specifications.js`
- The caveat and permission specifications are required by the new `PermissionController`, and are used to specify the `eth_accounts` permission and its JSON-RPC method implementation.
See the `PermissionController` readme for details.
- `migrations/068.js`
- The new state should be cross-referenced with the controllers that manage it.
The accompanying tests should also be thoroughly reviewed.
Some files may appear new but have just moved and/or been renamed:
- `app/scripts/lib/rpc-method-middleware/handlers/request-accounts.js`
- This was previously implemented in `controllers/permissions/permissionsMethodMiddleware.js`.
- `test/mocks/permissions.js`
- A truncated version of `test/mocks/permission-controller.js`.
Co-authored-by: Mark Stacey <markjstacey@gmail.com>
