The `TokenInput` component now takes the token as a prop, instead of
using the `selectedTokenAddress` state. The `UserPreferencedTokenInput`
component that wrapped `TokenInput` has also been updated to take the
token as a prop.
This function primarily ensured that there was a reasonable fallback
for `txParams` if the given transaction was missing it. This fallback
was only used in one place: the customize gas modal, during the send
flow specifically.
The helper function has been removed, and the default `txParams` is set
in the one place it was needed. In the future we should attempt to
simplify this modal so it doesn't need to know details about the
context in which it's being used.
The transaction list now filters by token in the `TransactionList`
component instead of in the transaction selector. This was done in
preparation for the asset page work.
Technically this approach is slightly less efficient than before, as
we're now filtering the transactions after they've been grouped
together rather than beforehand. The difference is minimal though, and
this method is more correct.
The old filtering was broken because it inappropriately filtered out
cancel transactions. Cancel transactions always have the `to` address
set to the same as the `from` address, and the token filter only
returned transactions where the `to` address was set to the token
address.
Now that we're only filtering by the `to` address of the initial
transaction, token transaction groups will be included in their
entirety, including any cancel transactions.
The `decimals` property of tokens was being set as a string instead of
a Number for any tokens added via `getTokenParams`. It's now cast to a
Number instead.
This prop is no longer required, now that the new fullscreen redesign
has been implemented. This was unused before the redesign as well,
seemingly by accident.
The fullscreen UI now shows roughly the same design as the popup UI.
A few additional changes depicted in the new fullscreen designs will
be implemented in subsequent PRs (e.g. the inline buttons on assets)
This was done now to make asset pages easier to implement. Implementing
asset pages solely for the popup UI would have been complicated by the
fact that we use viewport size to switch between the two layouts, so we
would have had to re-route upon resizing the window.
The `AccountDetailsDropdown` component has been rewritten to use the
new `Menu` component, and to follow the latest designs.
This should be functionally equivalent. A couple of the icons have
changed, but that's about it.
Support for a subtitle was added to `MenuItem` to support the `origin`
subtitle used for the explorer link for custom RPC endpoints.
A few adjustments were required to `test/helper.js` to accommodate
the use of `Menu` from a JSDOM context (this is the first time it's
been used in a unit test). A `popover-content` element was added to the
fake DOM, and another global was added that `react-popper` used
internally.
An additional driver method (`clickPoint`) was added to the e2e driver
to allow clicking the background behind the menu to dismiss it. This
wasn't possible using the `clickElement` method, because that method
would refuse to click an obscured element. The only non-obscured
element to click was the menu backdrop, and that didn't work either
because the center was obscured by the menu (Selenium clicks the center
of whichever element is targeted).
The `MenuBar` component has been converted to a functional component.
This was done to make upcoming changes related to the home screen
redesign easier to implement.
The `TransactionViewBalance` component has been split into three
separate components. This was done primarily to make the asset page
easier to implement. Also the name `TransactionViewBalance` didn't
describe this component very well anymore.
Instead of the Ethereum and token-specific logic being in the same
component, the two cases were split into the `EthOverview` and
`TokenOverview` components respectively. They both use the
`WalletOverview` component, which has the structure shared by both
cases.
A `Menu` component has been extracted from the
`ConnectedAccountsListOptions` component. The menu and the menu items
are now the `Menu` and `MenuItem` components respectively.
A custom body was added to the Storybook preview to ensure that the
`popover-content` element was present in the DOM before the Menu was
constructed.
The `Identicon` component was being passed a `network` prop, despite
not accepting a `network` prop.
A duplicate set of `token-cell` tests have also been deleted, as they
used this prop. The tests were never run, because the file was misnamed
(it needs to be named `.test.js`).
CSF = Storybook’s Component Story Format (CSF)
See https://storybook.js.org/docs/formats/component-story-format/
Note that the migrations still use CommonJS require, so the default export as
an object is quite ergonomic (& I don't want to touch the migrations).
This changeset updates the `getOriginOfCurrentTab` selector and the container
for the ConnectedSites page to use `activeTab.origin` instead of parsing the
URL. The `activeTab` URL is parsed in `queryCurrentActiveTab` before the UI is
launched and any subsequent parsing of the URL is unnecessary.
See `queryCurrentActiveTab` in `ui.js:86` [1].
[1]:e7bb0876f5/app/scripts/ui.js (L86-L118)
The account options menu is now much faster, and it correctly closes
when 'Switch account' is selected.
A static width had to be set on the menu so that it could be positioned
reliably. Without this width set, it was rendered as a different size
before positioning than after, which resulted in it being positioned
incorrectly. A `z-index` had to be added (equal to the `z-index` used
by the popover component) to ensure it wasn't rendered beneath the
popover.
The menu is automatically positioned relative to the account options
button, appearing below the button by default but above it instead if
there isn't room below. It is positioned to be inside the bounds of the
popover as well.
The account options button is now a `<button>` rather than a `<i>`.
This required a few additional style rules to overrule the default
button styles. Additionally the size was increased so that it matches
the designs more closely.
The callbacks for connecting, disconnecting, and switching accounts
have been updated to use state and props to determine the correct
address to use, rather than being bound to the correct address
parameter in the render function. This means we aren't creating a new
function upon each render anymore.
The `showAccountOptions` method still needs to be bound once per
account, but this was switched to use more readable syntax (`.bind`,
instead of the double arrow function).
`react-popper` and `@popperjs/core` were both added as dependencies.
These should be used for any UI requiring relative positioning (e.g.
tooltips, menus, etc.). Older versions of these libraries are already
in our codebase as transitive dependencies of the tooltip library we're
using.
The connected accounts are now ordered by keyring controller order
whenever the `lastSelected` time is equal. This ensures the order is
identical to what connected sites see. This is especially important
when no accounts have been selected, as it ensures the correct account
is marked as the "Primary" account.
The asset list has been updated to more closely match the new designs.
There are still a few major differences (e.g. the selection state, the
token menu) that can't be implemented until the asset screen has been
implemented.
The background color of the selected asset has been lightened, so that
it's less jarring until we remove it.
What
- modify `ui/app/helpers/utils/transactions.util.js` and
`ui/lib/account-link.js` to strip trailing slashes
if they are present.
- added relevant tests not just for the new scenario,
but also the general scenarios for these functions,
as there previously was no test coverage for these
two functions.
Why
- Current behaviour, when user enters a block explorer URL
when configuring a custom RPC, and that block explorer URL
contains a trailing `/`.
- e.g. `https://block.explorer/`
- this results in a double-slash (`//`) in the transaction
and account URLs generated by MetaMask.
- e.g. `https://block.explorer/tx/0xabcd...`,
`https://block.explorer/account/0xabcd...`
- This needs to be handled using a router redirect
on the server of the block explorer,
and this changes would avoid that requirement.
The tabs on the Home page have been updated to match the new home
screen designs.
A new `activeClassName` prop was added to the `Tab` component to allow
applying different styles to the active tab state.
I ran into specificity problems when overriding the default `Tab` styles
because the import order of our CSS is bizarre and wrong. For now I've
used a crude workaround, but we can fix this properly later by changing
the import order to place styles likely to be overridden first.
All asset list items now use the same component (`AssetListItem`).
Previously the tokens and the Ethereum balance were totally separate
components, despite being styled similarly.
Various unnecessary DOM elements and style rules were removed, but the
overall list looks identical to how it looked before.
`getShowFiatSelector` would return the `showFiatInTestnets` value
directly when on mainnet, which could be `undefined`. Now it is cast to
a Boolean instead.
This was done to fix a PropType warning in a component that will be
included in a future PR, where this selector was used for a required
prop.
Defaults have been added for all three preferences. The default values
added are both falsey, so this shouldn't result in any functional
change. This was done to help make this preferences more easily
discoverable.
The IDs for the `numberOfTokens` and `numberOfAccounts` Action
Dimensions were swapped. These are the correct IDs. We'll have to
consider that these are swapped when viewing any pre-v8.0.0 metrics.
The `.scss` file extension is not required when importing SCSS files.
It has been removed from all imports, for consistency. I chose to
remove it rather than add it everywhere because imports without the
extension seem to be more common.
The CSS class for the fallback Ethereum logo used in the identicon
component was with the `AssetList` styles, and was confusingly named
`balance-icon`. It has been migrated to the identicon styles, and
renamed `identicon__eth-logo`.
A few redundant rules have been removed as well (they were always
overridden by inline styles).
Add alert suggesting that the user switch to a connected account. This
alert is displayed when the popup is opened over an active tab that is
connected to some account, but not the current selected account. The
user can choose to switch to a connected account, or dismiss the alert.
This alert is only shown once per account switch. So if the user
repeatedly opens the popup on a dapp without switching accounts, it'll
only be shown the first time. The alert also won't be shown if the user
has just dismissed an "Unconnected account" alert on this same dapp
and account, as that would be redundant.
The alert has a "Don't show me this again" checkbox that allows the
user to disable the alert. It can be re-enabled again on the Alerts
settings page.
This component was indended to show both ETH/fiat and token balance,
but today is not used for token balance. As a result, large pieces of
this component and many props were unused in practice. The condition
about `formattedBalance` returning a falsy or `None` or `...` result
was also removed, as that doesn't seem to be possible.
The `balanceValue` passed into the `Balance` component in the asset
list has also been removed, as it isn't used.
When disabling an alert, the background `alertEnabledness` state of the
alert was being set to `undefined` instead of `false`. This didn't have
any user-facing effect, since `undefined` is falsey, but it did result
in a PropType error on the Alert settings page. This mistake was made
in #8550.
The `alertEnabledness` state is now correctly set to `false` instead of
`undefined`.
The unconnected account alert can now be disabled. A "don't show this
again" checkbox has been added to the alert, which prevents that alert
from being shown in the future.
An alert settings page has been added to the settings as well. This
page allows the user to disable or enable any alert.
The hover state background color of the "Account" in the popup home
screen menu bar has been updated to match the hover state background
color of the connected status indicator. Both hover state backgrounds
now match.
The checkbox color was sometimes incorrect after it was checked. I'm
not sure how to consistently reproduce this issue, but I was able to
make this happen most of the time if I clicked the checkbox while some
text was highlighted.
It seems that the `:checked` and `:indeterminate` pseudo-selectors were
not being applied right away for some reason. Either that or React
wasn't setting the `checked` state of the `input` element right away.
This problem has been worked around by using CSS classes instead of
pseudo-selectors. I am no longer able to reproduce the issue now.
A change made in #8284 had the unintended side-effect of making this
scrollbar appear on the home screen. Previously it was scrollable
without any scroll bar being visible.
This new dropdown component uses a native `select` element, thus
avoiding various issues encountered in attempting to reuse our existing
dropdown components for the new permission system alert modal.
The prefixed forms of `appearance` have been added temporarily so that
the component can be used in Storybook, as our Storybook config isn't
setup to do autoprefixing yet. Our real build system does handle
autoprefixing for this rule correctly already.
Resolves three different style issues due to overflow of content
and addresses an issue where UI was being squished due to available
screen real estate.
- On the choose account modal, when a user has enough accounts to need
to scroll within the account chooser, the last-connected data column
was squished. This is resolved by using a tooltip and icon for this data
rather than text printed in column.
- On the connection permission result screen where it shows the Dapp icon ->
Metamask icon, the bottom of the logos and dropshadows were being cut off
this was resolved by removing the height set on this element and allowing
it to fill the available space.
- On the confirmation screen the content appeared off center due to the scrollbar being overlayed instead of auto. This was resolved by removing some of the setting of manual overflow controls on the body element.
Tokens are now updated when the account switches after a failed account
import. The usual account switching flow (via the account menu) already
updated tokens, but this step was omitted when the account switched
after a failed import.
* Remove `estimatedGas` property from `txMeta`
The `estimatedGas` property was a cache of the gas value estimated for
a transaction when the default gas limit was set. This property wasn't
used anywhere. It may have been useful for debugging purposes, but the
same gas estimate is already stored on the `history` property so it
should be present in state logs regardless.
* Remove `gasLimitSpecified` txMeta property
The `gasLimitSpecified` property of `txMeta` wasn't used for anything.
It might have been useful for debugging purposes, but whether or not
the gas limit was specified can also be determined from looking at the
transaction history, so it's not a huge loss.
* Remove `gasPriceSpecified` txMeta property
The `gasPriceSpecified` property of `txMeta` wasn't used for anything.
It might have been useful for debugging purposes, but whether or not
the gas price was specified can also be determined from looking at the
transaction history, so it's not a huge loss.
* Remove `simpleSend` txMeta property
The `simpleSend` property of `txMeta` was used to ensure a buffer was
not added to the gas limit during gas estimation for simple send
transactions. It was made redundant by #8484, which accomplishes this
without the use of this property.
An alert is now shown when the user switches from an account that is
connected to the active tab to an account that is not connected. The
alert prompts the user to dismiss the alert or connect the account
they're switching to.
The "loading" state is handled by disabling the buttons, and the error
state is handled by displaying a generic error message and disabling
the connect button.
The new reducer for this alert has been created with `createSlice` from
the Redux Toolkit. This utility is recommended by the Redux team, and
represents a new style of writing reducers that I hope we will use more
in the future (or at least something similar). `createSlice` constructs
a reducer, actions, and action creators automatically. The reducer is
constructed using their `createReducer` helper, which uses Immer to
allow directly mutating the state in the reducer but exposing these
changes as immutable.
`removeFromAddressBook` returned a thunk that didn't return a Promise,
despite doing async work. It now returns a Promise.
The callers were updated to `await` the completion of this operation.
`addToAddressBook` returned a thunk that didn't return a Promise,
despite doing async work. It now returns a Promise.
The callers of this action creator were updated to `await` the
completion of the operation. It was called just before redirecting the
user to a different page or closing a modal, and it seemed appropriate
to wait before doing those things.
`editRpc` returned a thunk that didn't return a Promise, despite doing
async work. It now returns a Promise.
In the one place where this is used, it didn't seem important to update
the callsite to block on this finishing. Only one call followed it in
the event handler, and it didn't seem to depend on this.
`updateAndSetCustomRpc` returned a thunk that didn't return a Promise,
despite doing async work. It now returns a Promise.
In the one place where this is used, it didn't seem important to update
the callsite to block on this finishing. Only one call followed it in
the event handler, and it didn't seem to depend on this.
The `getSelectedAddress` selector has a fallback of selecting the first
MetaMask account. This is not useful. The only time the
`selectedAddress` is not set is during onboarding, before any accounts
exist, so selecting the first account wouldn't be useful anyway.
Co-authored-by: Erik Marks <25517051+rekmarks@users.noreply.github.com>
`setRpcTarget` returned a thunk that didn't return a Promise, despite
doing async work. It now returns a Promise.
The callers of this action creator didn't need to be updated, as they
were all in event handlers that didn't require knowing when the
operation had completed.
`editRpc` returned a thunk that didn't return a Promise, despite doing
async work. It now returns a Promise.
In the one place where this is used, it didn't seem important to update
the callsite to block on this finishing. Only one call followed it in
the event handler, and it didn't seem to depend on this.
Changes to the background state were being detected in the `update`
event handler in `ui/index.js` that receives state updates from the
background. However this doesn't catch every update; some state
changes are received by the UI in-between these `update` events.
The background `getState` function is callable directly from the UI,
and many action creators call it via `forceUpdateMetamaskState` to
update the `metamask` state immediately without waiting for the next
`update` event. These state updates skip this change detection in
`ui/index.js`.
For example, if a 3Box state restoration resulted in a `currentLocale`
change, and then a `forceUpdateMetamaskState` call completed before the
next `update `event was received, then `updateCurrentLocale` wouldn't
be called, and the `locale` store would not be updated correctly with
the localized messages for the new locale.
We now check for background state changes in the `updateMetamaskState`
action creator. All `metamask` state updates go through this function,
so we aren't missing any changes anymore.
`setProviderType` returned a thunk that didn't return a Promise,
despite doing async work. It now returns a Promise.
None of the callers of this action creator needed to know when it
completed, so no changes to the call sites were made.
These action creators for the "message manager" controller
interactions have been updated to use `async/await`. There should be
almost no changes in behavior. The only things removed were a few debug
log statements, and a single `console.log`.
Many of the "message manager" background methods return a full copy of
the background state in their response; presumably to save us from
making a full round-trip to update the UI `metamask` state after it
changes. However, the action creators responsible for calling these
methods were calling `updateMetamaskState` even when the background
method failed. In effect, they were setting the UI `metamask` state to
`undefined`.
They have been updated to only set the UI `metamask` state if the
background method succeeded.
`setSelectedAddress` returned a thunk that didn't return a Promise,
despite doing async work. It now returns a Promise.
This action creator was only called in two places, and neither benefit
from using the Promise now returned. They were both event handlers. In
both cases there was an existing Promise chain, but the only thing
after this set was a `catch` block that displayed any error
encountered. I decided not to return the result of `setSelectedAddress`
to this chain, because all it would do is set the warning a second
time in the event of failure.
The `forceUpdateMetamaskState` function now uses `async/await` instead
of a Promise constructor. This was done to make an upcoming change
easier (making `updateMetamaskState` async).
`showAccountDetail` returned a thunk that didn't return a Promise,
despite doing async work. Now it returns a Promise.
This action is only called in one place, and it looks like the actions
dispatched alongside it were meant to be run in parallel, so no changes
were made there.
`forceUpdateMetamaskState` was being called in various action creators
without `await`. Each action creator now waits for the state update to
complete before continuing.
`setCurrentCurrency` returned a thunk that didn't return a Promise,
despite doing async work. It now returns a Promise.
The callers in this case never needed to know when this action had
completed, but at least this makes our tests more reliable. They were
already `await`-ing this action, despite the lack of Promise.
The action creators that use `forceUpdateMetamaskState` without
awaiting that task's completion have been updated to use `async/await`.
This was done in preparation for `await`-ing the completion of
`forceUpdateMetamaskState`, which will be done in a subsequent PR.
The `shift-list-item` component for displaying ShapeShift transactions
has been removed, along with three other components that were used
solely by that component (`copyButton`, `eth-balance`, and
`fiat-value`).
This component hasn't been used in some time, as ShapeShift
transactions no longer exist to display. The controller that ShapeShift
transactions originated from was removed in #8118, and it became
impossible to create new ShapeShift transactions from within MetaMask
in #6746
This state has been removed from the background. It was used for the
old UI, and has been unused for some time. A migration has been added
to delete this state as well.
The action creator responsible for updating this state has been removed
from the UI as well, along with the `callBackgroundThenUpdateNoSpinner`
convenience function, which was only used for this action.
The `transForward` app state is no longer used, so it has been removed.
Associated actions have been removed as well.
This state dates back a few years, so I was unable to determine when it
was made obsolete.
Keyrings are added either through the `getKeyringForDevice` background
method (as part of the hardware wallet connect flow), or via
`importAccountWithStrategy` (when importing an account). The
`addNewKeyring` action and corresponding background method has not been
used in a long time.
The `estimateGasMethod` function passed to `estimateGas` is now an
async function. It is now invoked using `async/await` rather than a
Promise constructor.
This was done as part of a broader effort to use Promises rather than
callbacks when interacting with the background.
The background connection used in `actions.js` was being promisified
in specific actions. Instead it's now promisified once. This was made
possible by changes in `pify` v5.0.0 that ensure the binding works
correctly when passing in an object to `pify` (e.g. the `this` value
is correctly set to the wrapped background connection).
This async background connection has been temporarily assigned to a
separate variable, until we can transition all of our actions to using
this. This was done to reduce the size of this PR. There are a lot of
actions.
This state hasn't been used since #5886. The nonce we display in our UI
is now from the background, rather than queried directly from the
front-end.
This also means we save making this network call each time a pending
transaction is added, and each time the transaction list is mounted.
The comment above this function was originally written for a different
function: `callBackgroundThenUpdate`. It was mistakenly left above
`callBackgroundThenUpdateNoSpinner` in #1603 when this function was
added.
The original `callBackgroundThenUpdate` function this was written for
was removed recently in #7675, as it was no longer used.
The format of the comment has also been updated to match our
conventions, and JSDoc params have been added.
`markPasswordForgotten` is an asynchronous function, but it was being
called synchronously. The page was redirected without waiting for the
operation to complete.
We now wait for the operation to complete before continuing. Failure is
still not being handled correctly, but that will be addressed in a
separate PR.
* Add popover for informing user about the connected status indicator
* Ensure user only sees connected status info popover once
* Default connectedStatusPopoverHasBeenShown to true and set it to false in a migration
* Add unit test for migration 42
* Initialize AppStateController if it does not exist in migration 42
* Update connect indicator popup locale text
* Code cleanup for connected-indicator-info-popup
* Code cleanup for connected-indicator-info-popup
This method adds the given account to the given origin's list of
exposed accounts. This method is not yet used, but it will be in
subsequent PRs (e.g. #8312)
This method has been added to the background API, and a wrapper action
creator has been written as well.
Selecting a new account now results in all domains that can view this
change being notified. Previously only the dapp in the active tab was
being notified (though not correctly, as the `origin` was accidentally
set to the MetaMask chrome extension origin).
This handling of account selection has been moved into the background
to minimize the gap between account selection and the notification
being sent out. It's simpler for the UI to not be involved anyway.
Previously all browser globals were allowed to be used anywhere by
ESLint because we had set the `env` property to `browser` in the ESLint
config. This has made it easy to accidentally use browser globals
(e.g. #8338), so it has been removed. Instead we now have a short list
of allowed globals.
All browser globals are now accessed as properties on `window`.
Unfortunately this change resulted in a few different confusing unit
test errors, as some of our unit tests setup assumed that a particular
global would be used via `window` or `global`. In particular,
`window.fetch` didn't work correctly because it wasn't patched by the
AbortController polyfill (only `global.fetch` was being patched).
The `jsdom-global` package we were using complicated matters by setting
all of the JSDOM `window` properties directly on `global`, overwriting
the `AbortController` for example.
The `helpers.js` test setup module has been simplified somewhat by
removing `jsdom-global` and constructing the JSDOM instance manually.
The JSDOM window is set on `window`, and a few properties are set on
`global` as well as needed by various dependencies. `node-fetch` and
the AbortController polyfill/patch now work as expected as well,
though `fetch` is only available on `window` now.
The prop passed into the SignatureRequestHeader was changed from
`selectedAccount` to `fromAccount` in #8079, but the header component
itself was never updated to use the new prop name.
The header component for the new Signature Request screen has an
undeclared variable called `name` in it. This was present in the
original implementation of this component in #6891. It's unclear what
this was supposed to be, and it doesn't seem to reference anything that
exists.
This new checkbox component uses a plain `input` component internally,
so the browser treats it like a native checkbox. It is styled by hiding
the native checkbox and replacing it with Font Awesome icons (the same
that we are using in Figma).
Support for a 'disabled' state and an indeterminate state has been
added as well. The `onClick` prop has been made optional, as it may not
be required if the parent component is intercepting the click instead.
The `regular` Font Awesome font style needed to be added so that we
could use the `far fa-square` icon for the unchecked checkbox.
The "global" action constants (the ones previously in `actions.js`)
have been moved to a separate module. This was necessary to avoid a
circular dependency in an upcoming change that was causing problems.
In general the "ducks" pattern of organizing Redux stores does result
in circular dependency problems. This is because reuse of actions
between reducers is encouraged, so it's not uncommon for two reducers
to want to reference an action from the other. Going forward we can
avoid this problem by moving action constants that are shared between
reducers into this shared module.
This change replaces `getRenderablePermissionsDomains` with a new selector `getConnectedDomainsForSelectedAddress` that works better. The data returned from this selector is used to populated the _Connected Sites_ modal, which (as of #8262) didn't use most of the data returned from the old selector.
The old selector only looked at the first address that was exposed, making it not work for anything other than the first account connected to a particular origin.
This action was never triggered in practice, as MetaMask is never
unlocked from the UI. The unlock always occurs as a result of a
background state update.
The last active time for each account in the Connected Sites list was
formatted as `yyyy-M-d` (i.e. without the zero-padding for the month
and the day). This didn't match the designs, isn't compliant with
ISO-8601, and generally isn't a common date format.
The month and day are now zero-padded.
* Connect screen popup redesign
* Open permission request in notification instead of tab
* Remove no longer user locales
* Update permissions unit test mock to accout for change of opts passed to permissions controller
* Lint fix
* Inline broken line svg in permission-page-container-content.component.js for faster loading
* Add back button to second screen on connect flow
* Add xOfY locale and use for the page count in the connect flow
* Lint fix for svgs permission-page-container-content.component.js
* Fix rebase error
* Lint fix
* Clean up styles on the connect-screen-into-popup branch
* Use closeCurrentWindow to close window on cancel when in full screen connect flow
* Handle errors in rejectPermissionsRequest
* Full screen styles for connect flow
* Lint fixed in permissions-connect and actions.js
* Redirect screen now shows metamask icon instead of users identicon
* Fix subtitle spacing in permissions-connect-header'
* Use window.close instead of closeCurrentWindow() in cancelPermissionsRequest
* Use permissions-connect-header__subtitle in permissions-connect-header.component
There were two existing cases where a footer was added to a popover by
putting it in the popover contents. This has been refactored to place
the footer in the popover instead, so that styles common to all
popover footers could be shared.
The popover now has a `section` element instead, giving the `header`
and `footer` elements a correct section context.
The height of the popover is now set to a maximum of 94% of the
viewport height, rather than a static height of 564px. This setting
ensures that the popover has a maximum height of exactly 564px in the
popup, which matches the designs. However it is now able to shrink or
grow to accommodate larger viewports or smaller popovers.
* Implement tooltip and styled sentence parts on header text of second screen of multi-account-select flow
* Clean up code related to the multi-accounts tooltip implementation
* Add UI for selecting multiple accounts on the first permissions connect screen
* Make accounts list scrollable on connect screen
* Change title wording on connect screen to 'select your accounts'
* Add select all tooltip to info circle on top of connect screen account list
* Add security info footer to the first screen of the connect flow
* Apply redesigns to page 2 of connect flow
* Display number of accounts on connect flow second screen if there are multiple to connect
* Update e2e tests for connect screen multi-select changes
* Remove unused chooseAnAcount message
* Fix styling/display of redirect elements on second page of connect flow
* Assorted small fixes in permissions connect
* Remove unnecessary tiny delays in spec files
* Remove incorrect use of bem modified in choose-account
* Remove unused locale
* Use Set for managing selected accounts in choose-acount and permissions-connect componets
* Compone!
* Move connect flow header into a reusable component, and implement new header designs
* Update locales and add missing locales
* Improve permission list item design (second screen of connect flow)
* Check box component improvements
* Fixes in variables.scss
* Simplfy code in selectAll of choose-account.component
* Hide checkboxes on first pages on connect flow when there is only one account
* Allow autofill of default new account modal text with right arrow
* Disable next button on first screen of connect flow when no accounts selected
* Improve choose-account/index.scss
* Remove metamask secure graphic
* Fix connect flow redirect screen
* Fix connectToMultiple locale
* Remove locales no longer used after connect flow multiple connect updates
* Fix size of dapp icon on redirect screen of connect flow
* Clean up choose-account code
* Stop using placeholder in new-account-modal
* Remove unused styles in permission-page-container/index.scss
* Pass origin instead of site name to PermissionsConnectHeader in connect flow
* Make iconName a required prop in permissions-connect-header
* Show checkbox in cases where there is one account in the choose-account list
* Do not render select all checkbox when only 1 list item, instead of just hiding it
* Small cleanup in choose-account/index.scss
* Fix home container height
The home container element's height was not set, so the lower half of
the home component was showing as the wrong color when the user had no
transactions or tokens.
This was broken in #8271, which was a fix for a different CSS problem.
Both problems should remain fixed now with height being set explicitly.
* Remove obsolete `flex` rule
This element is no longer within a flex container as of #8271, so this
rule doesn't do anything.
We don't need to store the current UI type as a global. We're already
using the `getEnvironmentType` helper function throughout the UI, so
we'd might as well use that instead of this global state.
The `History` title above the transaction history was changed in #8264
to only show when there are pending transactions, because it was
redundant to show an additional `History` title below a tab called
`History`. It was preserved when there were pending transactions
because the pending transactions are shown first in the list, followed
by the history, so the title served to divide the two lists.
This ended up breaking the fullscreen view though, which doesn't use
tabs yet. It has been updated to always show on fullscreen.
Two tabs have been created on the home screen: 'Assets' and 'History'.
This tabbed view is shown only on small screens (e.g. in the popup).
The fullscreen view is unchanged.
The toggle-able left sidebar no longer exists, so some 'sidebar-left'
specific code and styles have been removed. The button in the menu bar
has been removed as well.
The 'History' title of the transaction history is now redundant when
where are no pending transactions, so it as been conditionally hidden.
A passthrough for `data-testid` has been added to the Tab component for
convenience in e2e tests.
The popup view would expand beyond the width of the viewport when
expanding a transaction. This bug was introduced in #8139 when I
removed the `min-width: 0` property from the `home__container` class;
this property was giving the parent permission to shrink that div below
the size of its content.
Instead of restoring that property, the parent component is no longer
using `display: flex`. Flexbox was never useful here, as this is just a
wrapper div around a wrapper div, both with identical sizes. The
default display type of `block` produces the desired behaviour with
less rules.
The Tabs component expects the `children` prop to be either a single
Tab component or an array of Tab components, and the internal tab index
should always map onto one of these components. However, if an invalid
tab index was set, it was just returning the first tab contents.
Instead it will now validate that the tab being asked for does exist,
and throw an error otherwise.
The pieces that we'll be referring to as the "Asset List" in the near
future have been extracted from WalletView into a separate AssetList
component. This list includes ETH, the tokens, and the 'Add Token'
button.
The styles were moved alongside this new component as well.
The token cell how shows a warning inline for the case where the token
balance failed to update. It displays a warning icon next to the
balance, with a tooltip that contains the same contents as was shown on
the token list previously.
The 'Add Token' component has been redesigned to be more in-line with
the new home screen design. The description instructing the user to
click the 'Add Token' button has been removed, and the section itself
has been made roughly the same size as one of the list item. The text
now appears on just one line, overflowing to two if necessary.
The 'interactive' prop for React Tippy will keep the tooltip open when
the user moves the mouse over the tooltip. This enables interactive
tooltips, where the user is expected to click on something in the
tooltip (e.g. a message with a link).
The styles for the TokenCell component have been moved to be alongside
the component. They have also been renamed from `token-list-item` to
match the component name.
This commit updates the existing _Connected Sites_ section to a modal using
the `Popover` component. This will serve as a base for the new modal design.
The official npm package for Font Awesome Free is now used instead of
the vendored styles. Previously we had been using v4.4.0, now we're
using v5.13.0.
We're now importing the Font Awesome SCSS modules instead of using the
minified CSS bundle. This integrates more cleanly into our build
system, and it lets us use their mixins directly in the future if we
need to.
The variable `fa-font-path` has been set to reference our font
directory, as instructed here:
https://fontawesome.com/how-to-use/on-the-web/using-with/sass#compile
Various SVGs were being imported directly in components using Webpack
loaders. This was done to get these components to work correctly in
storybook, which uses Webpack. However we don't use Webpack for our
actual build system, so these components would fail when you attempted
to use them.
Instead the storybook script has been updated to use the `--static-dir`
flag, which allows specifying a directory of files to serve statically.
The `app` directory is served statically, so all of the relative URLs
we use in practice to reference fonts and images should just work.
The storybook build command has been updated to use the same flag.
Unfortunately this also means that the uncompiled background code is
now included in the build as well, because it's alongside our static
files. This shouldn't have any impact upon the build though.
The use of this `static-dir` option as made much of the existing
storybook Webpack configuration unnecessary, so it has been reduced to
just the essential steps.
The token list would be stuck on "Loading" when there was at least one
token, but the balance of all tokens was zero. This bug was only
present on `develop`, and has not affected any published version of the
extension.
This was introduced in #8223, which removed what at the time seemed to
be an unnecessary update step. It turns out that the step was required
as a workaround to this bug with the token tracker.
The bug was fixed in https://github.com/MetaMask/eth-token-tracker/pull/33
and published in v2.0.0 of `@metamask/eth-token-tracker`.
The user-specified seed phrase during the first-time-flow import step
required the phrase to be entered in all lowercase. The case does not
add any extra entropy to the seed, so there's no reason to be case
sensitive. Flexibility here will improve the onboarding UX.
This commit makes the entered seed phrase case-insensitive.
Fixes#8171
* Refactor token list into standard container/component modules
The token list has been moved into its own directory and split into
separate container and component modules. Additional updates have been
made to simplify the component logic as well.
* Update token-list to use new React Context API
The token list click handler has been moved up from the token cell to
the wallet view component where the token list is used. This keeps the
responsibilities of the token list and token cell components a bit more
focused - they're now only responsible for display, not what the
effects of clicking should be.
The `network` prop was being passed to the Identicon despite that not
being an Identicon prop, and the `userAddress` prop was being passed
down by the container but was unused. The methods removed were not
called anywhere.
These tests broke when `sinon.restore()` was called in a separate test
because they setup stubs/spies using `sinon` in the module context.
These were constructed then restored before the tests even ran.
Instead the test doubles are now setup in the `beforeEach` hook, which
in addition to fixing this problem also ensures each unit test is
isolated from the others.
* Refactor tab styles to minimize tab component styles
The tab component styles were not applicable to all tab instances, so
they were being overridden in a few places. Instead the tab styles have
been reduced to a minimal set that should be applicable in most cases.
There are a few functional changes here as well, meant to undo
changes made accidentally in #8132. Before that PR the page container
was overriding the tab styles altogether, but after that PR they were
combined with the base tab styles instead.
* Remove background color
This was previously being overridden by the page container styles, and
it matches the inherited background color already in the one other case
(the confirm page for token interactions)
The "i18n-provider" module has been replaced by a new `i18n.js` module
in the `contexts` directory which provides the `t` function via the new
React Context API.
The legacy context API is still used throughout the codebase, so a
legacy context provider has also been added as a shim until we migrate
away from the old API. The migration does require changing every single
place where the `t` function is used, so it is a non-trivial amount of
work. This shim allows us to tackle it one piece at a time without
breaking anything.
This was placed in a new `contexts` directory because it didn't seem
to belong in any existing categories. It certainly isn't a higher-order
component.
The translation helper function we use everywhere (`t`) would fallback
to the message `[${key}]` for any key not found in the set of localized
messages. Instead it how returns `undefined` in that case.
`[${key}]` isn't something you'd typically want to show to users, so
this fallback wasn't overly useful in practice. At best it served to
hide errors.
The falsey return value in the case where the message is missing makes
it easier to implement a fallback for that case. Such a fallback is
used in the `confirm-transaction-base` component, to restore the
fallback behavior accidentally changed in #8211
When the token tracker is first constructed and the first balance
update is triggered, we manually serialize the tracker state and call
our update function. This is _in addition_ to the update event handler
though, so the balances get updated twice. Similarly, we also catch any
errors during this first update to handle them, but this is done via an
event as well, so is redundant.
These steps have been removed; updates and errors are now handled
solely through events. We were able to drop a check from
`updateBalances` as well to ensure the tracker is still running, as the
event cannot be emitted unless it's running.
* Add minimal working popover
* Fix styling of popover component
* Use lorem ipsum
* Update classnames and remove unrelated styles
* Remove unused components
* Add SVG close icon
* Add Close icon to icon stories
* Use div
* Use `addon-actions`
* Use `<button>` for close
* Fix button wobble in Firefox
* Remove border
These two functions were not especially useful. `tOrDefault` was used
only by `tOrKey`, and `tOrKey` was only used in one place. All it did
was return the given `key` directly if it was falsey, so it was easily
replaced by a condition.
Previously a few mostly-empty `div`s would be shown if a render
happened while the confirm page was loading. Now nothing is shown. This
shouldn't impact users at all, as this condition should only last a
fraction of a second.
* Add tx list-item component
New list item compoent for transaction history
* Simplify component logic and remove type checks
* Address remaining feedback
* Remove extra line
* Place className prop on its own line
* Rename to primaryCurrency and secondaryCurrency
* Make the title `isRequired`
* Fix no-undef
* Remove more + buttons to be implemented in seperate PR
* Add minimal store and I18nProvider to storybook
* Use Component to support translations
* Add `metamask` to store
* Rename decorator
The current selected asset in the asset list should be highlighted, but
this highlighting was broken for `ETH`. `ETH` was not highlighted when
it was selected, but it would be highlighted when anything else was.
This was broken accidentally in #7546
The method registry was being initialized with the global variable
`ethereumProvider` before that variable was set. As a result, the
method registry was falling back to an internally constructed provider
that used the wrong provider URL (an obsolete Infura API). This was
resulting in an error with the message "Project ID not found".
The method registry is now initialized lazily, when it's first needed.
This should be well after the initialization of `ethereumProvider`,
which occurs during the UI initialization.
The props `isActive` and `tabIndex of the Tab component are required
and are always passed in, but the prop type warning is triggered
because the tabs are rendered without these props first, then cloned by
the `Tabs` component, where these props are added.
To silence the warning, the props have been made optional.
The sidebar used to speed up a transaction while it's pending or after
it has failed currently allows editing the gas limit, but that new
limit is ignored. This is especially problematic for transactions that
failed due to a low gas limit, as the problem becomes impossible to fix
by retrying.
The gas limit specified by the user is now used in the speed up
transaction.
Fixes#8156Fixes#7977
The address is blank momentarily when navigating to the confirmation
screen when sending a token. The address is updated in a subsequent
render.
The ENS reverse resolution is now only attempted if the address is
given. It has also been updated to attempt resolution when the address
is finally set, which fixes the reverse resolution for token sends.
I had hoped to get rid of this interim render-without-address, but that
turned out to be a bit more challenging. The problem is that the UI
submits transactions through the provider just as a dapp would, and the
provider doesn't say when the transaction is submitted. The promise
returned doesn't resolve until after confirmation. We would have to
start calling the background methods directly and bypass the provider
to get the feedback we need, and that sounded potentially dangerous.
Definitely a challenge for another day.
The `metamask.send.from` field was assumed by various selectors to be
an object, but instead it was recently set to a string. The selectors
have been updated to assume it's a string, and to fetch the full
account object explicitly.
The selector `getSendFromObject` was repurposed for this, as that's
basically what it already did. The optional address parameter was
removed though, as that was only used to fetch the `from` address in
cases where the `send` state was set without there being a `from`
address set. That case is no longer possible, as the `from` address is
always set upon the initialization of the `send` state.
The `getSendFromObject` selector no longer fetches the 'name' of that
address from the address book state either. This property was not used
in either of the cases this selector was used.
The `createRetryTransaction` was accidentally removed from the
`gas-modal-page-container` component during a refactor in #7730.
Attempting to retry a transaction since that change has resulted in a
UI crash.
* Adds notification icon circles and associated storybook stories
* Fix image paths in circle-icon.stories and message-circle-icon.component
* Code improvements for icon circles PR: remove additional z-index, make iconSource required
* Use component story format in circle-icon.stories and message-circle-icon.stories
* Remove success and info circle icons, as not presently needed
* Rename message-circle-icon to alert-circle-icon
* Small code fix ups for alert-circle-icons
* Update i18n-helper to allow substitutions of react components and wrapping of translation substrings
* Simplify code in i18n-helper.js related to substitutions, including react substitutions.
* Remove wrapper support from i18n in favour of using translations in substitutions.
* Fix i18n-helper substitution logic: ensure correct index of substitution is applied
* Throw error if there are not enough substitutions for a translation phrase
* Adds unit tests for now i18n-helper substitution functionality
* Fix grammar, react element line spacing and test layout+readability in i18n-helper.test.js
The base component we use for dropdowns handles ensuring the dropdown
is closed when the user clicks outside the dropdown. This functionality
was accidentally broken in #7781 when converting it to an ES6 class.
The "Transaction View" component has been merged with the Home
component. The division between these two components seemed wrong
because the "Transaction View" contained the menu bar (distinctly a
"home" thing, not a "transaction" thing), and we will be adding more
non-transaction-related components shortly.
This also let us use a single `Media` component instead of two.
The notifications displayed on the home screen were being passed
through the `TransactionView` and `TransactionList` components before
being rendered. This was unnecessary because the notifications are
absolutely positioned.
They are now rendered directly in the home component where they're
defined. A helper function has been written to improve readability.
The styles used for the Home component were in the huge
"newui-sections" SCSS file. Instead they've been moved into an SCSS
module alongside the component, to follow our conventions.
The `main-container` class was left as-is because it is shared between
here and the settings page.
This effectively covers the `Tab` component as well, which doesn't
really make sense to showcase on its own.
One minor change was made to the actual `Tabs` component; `children`
was marked as a required prop. It doesn't render anything sensible if
they are omitted, and it always has at least one child in our codebase.
The tab component now sets the `tab` and `tab--active` classes
internally regardless what class is passed in. The convention in React
is to allow adding _additional_ classes via the `className` prop, not
to allow removing internal classes entirely.
the `activeClassName` prop was removed entirely. A few other props that
are always passed in have been marked as required.
One main configurable story has been added, plus a few distinct other
examples. All props are covered except `className`, which seems safe to
ignore.
Default props have been added to `Identicon` to make more explicit what
defaults were expected; there is no functional change.
The recommended way of writing stories changed in Storybook v5.2 to
the Component Story Format (CSF). Instead of using `storiesOf` and
running everything upon module import, the new story format is a
declarative description of each component that uses ES6 import
semantics.
