* Turn off all old notifications
* Remove unnecessary attempt to close whats new popup in e2e test
* Remove unneeded whats new popup closes in e2e tests
* Lint fix
* Show test networks toggle button in settings/advanced tab.
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
* Apply toggle testnet settings and show/hide testnets when on/off
Add localhost to testnet.
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
* Lint fixes.
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
* Show add network button
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
* Open full screen when add network is called.
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
* Show custonm rpc before testnet rpcs
lint fixes.
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
* Test cases for network dropdown.
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
* Test cases for toggle test networks in advanced tab component.
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
* Lint fixes.
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
* Fix Locales.
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
* E2E Tests: Custom RPC is now called Add Network
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
* Lint fix
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
* E2E: When Add Network button is clicked, wait for the full screen window to
be visible
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
* findVisibleElement should use a class. i.e start with a dot
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
* Hide Dropdown when Add Netwok is clicked.
Only show full screen if it's not already showing.
E2E tests passing.
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
* Lint fixes
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
* Fix tests for jest
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
* Testnets are not being shown by default anymore, tests should use
Mainnet instead.
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
* Import Button from ui
Change selector name to getShowTestnetworks
Fix button to show full width
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
* Fix e2e tests
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
* Remove localhost from INFURA provider types.
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
* Fix errors in Advanced Tab Component tests
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
* Lint fixes
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
* Fix unit tests for advanced tab component.
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
* Remove deleted elements from e2e tests
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
* Make sure all tests passed.
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
* Lint fixes
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
The fixture server now supports state substitutions. This allows us to
embed dynamic values in our fixtures.
The `custom-token` fixture has been updated to include such a fixture.
The date that the seed phrase reminder was last shown has been updated
to always be the current date, to prevent the reminder from showing up
during e2e tests. This fixes the e2e test failure for the test
"add-hide-token.spec.js" that we've been seeing on CI lately.
The npm scripts used to run Mocha scripts have been greatly simplified.
As we transition more tests from Mocha to Jest it was becoming
increasingly difficult to update the CLI arguments to keep all of these
scripts working correctly. This reorganization should make that process
much simpler.
The base Mocha options are in `.mocharc.js` - all except for the target
tests to run. Those are still given via the CLI. There is a second
config file specifically for the `test:unit:lax` tests (i.e. the Mocha
tests that have no coverage requirements) because it requires a change
to the `ignored` configuration property. We can create an additional
configuration file for each test script we add that needs further
configuration changes.
The `test:unit:path` script used to be used to run Mocha tests at a
given path. Now that can be done using `yarn mocha` instead, so this
script has been removed.
The `yarn watch` command has been broken for some time now, so it has
been removed as well. Mocha tests can still be run with a file watcher
using `yarn mocha --watch <path>` or `yarn test:unit:mocha --watch`.
The README has been updated to remove references about the `watch`
command that was removed. I considered explaining the other test
scripts there as well, but they were difficult to explain I will
attempt to update the README after making further simplifications
instead.
* lavamoat - add lavamoat to webapp background
* test:e2e - add delay to resolve failure
* test:e2e - add delay to resolve failure
* build - add a switch for applying lavamoat, currently off for all
* test/e2e - remove delays added for lavamoat
* Revert "test/e2e - remove delays added for lavamoat"
This reverts commit 79c3479f15c072ed362ba1d4f1af41ea11a17d63.
* Replace hardcoded sent ether label on confirm screen
* replace transaction type SENT_ETHER with network agnostic SENDING_NATIVE_ASSET
* remove sentEther translation base
* make backwards compatible with lingering transaction of legacy sentEther type
* update localalization files
* fixup legacy sentEther transaction type
* changing new transaction type away from localization string
* revert migration tests
* update fixtures and test data
* update name of new transaction type
* add migration
* remove legacy SENT_ETHER from transaction types enum object
There are a few issues encountered when running `yarn setup` on new
Apple Silicon (aka M1, aka arm64) Macs:
* The script halts when attempting to run the install step for
the `chromedriver` package with the message "Only Mac 64 bits
supported". This is somewhat misleading as it seems to indicate that
chromedriver can only be installed on a 64-bit Mac. However, what I
think is happening is that the installation script for `chromedriver`
is not able to detect that an arm64 CPU *is* a 64-bit CPU. After
looking through the `chromedriver` repo, it appears that 87.0.1 is the
first version that adds a proper check ([1]).
Note that upgrading chromedriver caused the Chrome-specific tests to
fail intermittently on CI. I was not able to 100% work out the reason
for this, but ensuring that X (which provides a way for Chrome to run
in a GUI setting from the command line) is available seems to fix
these issues.
* The script also halts when attempting to run the install step for
the `electron` package. This happens because for the version of
`electron` we are using (9.4.2), there is no available binary for
arm64. It appears that Electron 11.x was the first version to support
arm64 Macs ([2]). This is a bit trickier to resolve because we don't
explicitly rely on `electron` — that's brought in by `react-devtools`.
The first version of `react-devtools` that relies on `electron` 11.x
is 4.11.0 ([3]).
[1]: 469dd0a6ee
[2]: https://www.electronjs.org/blog/apple-silicon
[3]: https://github.com/facebook/react/blob/main/packages/react-devtools/CHANGELOG.md#4110-april-9-2021
* Remove button group for non-EIP-1559 networks
* Fix tests...maybe
* Remove unnecessary props, as well as gas display
* Remove unused string
* test progress
* fix test
* fix test
* add customizes gas block to improve e2e pass rate
Co-authored-by: Alex <adonesky@gmail.com>
Fixing up tests and add back old custom gas modal for non-eip1559 compliant networks
Remove unnecessary props from send-gas-row.component
fix breaking test
Fix primary and secondary title overrides
fix rebase issue
Fix rebase conflict
Co-authored-by: David Walsh <davidwalsh83@gmail.com>
The benchmark script can now be set to retry upon failure, like the E2E
tests do. The default is zero, just as with the E2E tests. A retry of 2
has been set in CI to match the E2E tests as well.
The `retry` module had to be adjusted to throw an error in the case of
failure. Previously it just set the exit code, but that only worked
because it was the last thing called before the process ended. That is
no longer the case.
Our benchmark script now uses `yargs`. Functionally it should be nearly
the same as before, except that now it has more documentation and
validation. The one functional difference aside from that is that the
`--pages` flag now takes space-separated arguments rather than comma-
separated.
Previously the benchmark script would throw an error if asked to take
just 1 sample. Now it works, though the stats returned are of
dubious use.
The problem was that it was impossible to calculate the standard
deviation or margin of error of a set of 1. Instead it now returns
zero for both of those values in the single-sample case, which is what
it would return for two identical samples.
* Add `--leave-running` flag to E2E test script
The `--leave-running` flag has been added to the E2E test runner. This
ensures the browser, ganache, and everything else stays running upon
test failure. This is useful for local debugging, for investigating
what state the extension was in when it failed.
* Add `--leave-running` support to `metamask-ui.spec.js`
This script makes it easier to run an individual E2E test. In the past
I've run individual scripts by editing `run-all.sh` manually, but now
that can be done more easily with this script. It also allows setting
the number of retries to use and the browser to use from the CLI.
This script has been added as an npm script as well, called
'test:e2e:single'.
The `run-all.sh` script was rewritten in JavaScript to make it easier
to pass through a `--retries` argument.
The default number of retries has been set to zero to make local
testing easier. It has been set to 2 on CI.
This was mainly done to consolidate the code used to run an E2E test in
one place, to make later improvements easier.
Chrome logs are now enabled for E2E tests when the 'ENABLE_CHROME_LOGS'
environment variable is set to anything other than `false`.
This was helpful to me in debugging Chrome crashes on CI, the ones with
the error "unknown error: DevToolsActivePort file doesn't exist". This
was the only way to discover the cause of the error. It's also useful
for discovering console errors from the background process or from the
UI.
It's disabled by default because it makes the test output quite noisy
and difficult to read.
The dapp is now started directly from the `metamask-ui.spec.js` test
module. This makes it easier to run independently, and brings it in-
line with our other E2E tests.
The `--no-timeouts` flag is now used as well, rather than setting the
timeout to `0` within the test. This also brings it in-line with our
other tests.
Mainly this was done to facilitate further refactors which will come in
later PRs.
* warn users when they attempt to add a network that is already configured
* clean up validation logic
* fixing up e2e tests
* Update test/e2e/helpers.js
Co-authored-by: Mark Stacey <markjstacey@gmail.com>
Co-authored-by: Mark Stacey <markjstacey@gmail.com>
