The ESLint config has been updated to v8. The breaking changes are:
* The Prettier rule `quoteProps` has been changed from `consistent` to
`as-needed`, meaning that if one key requires quoting, only that key is
quoted rather than all keys.
* The ESLint rule `no-shadow` has been made more strict. It now
prevents globals from being shadowed as well.
Most of these changes were applied with `yarn lint:fix`. Only the
shadowing changes required manual fixing (shadowing variable names were
either replaced with destructuring or renamed).
The dependency `globalThis` was added to the list of dynamic
dependencies in the build system, where it should have been already.
This was causing `depcheck` to fail because the new lint rules required
removing the one place where `globalThis` had been erroneously imported
previously.
A rule requiring a newline between multiline blocks and expressions has
been disabled temporarily to make this PR smaller and to avoid
introducing conflicts with other PRs.
This should include no functional changes. We only use `electron` for
`react-devtools`, which appears to still work after this update.
This replaces PR #12338.
The `selectHooks` function has been replaced with the equivalent
function from the `@metamask/rpc-methods` package, which is
functionally equivalent.
The function was included in that package so that it could be used
elsewhere in the `snaps-skunkworks` repo. Eventually the goal is to
migrate much of our RPC logic into this package so that it can be
shared across products, and by our libraries as needed.
# Permission System 2.0
## Background
This PR migrates the extension permission system to [the new `PermissionController`](https://github.com/MetaMask/snaps-skunkworks/tree/main/packages/controllers/src/permissions).
The original permission system, based on [`rpc-cap`](https://github.com/MetaMask/rpc-cap), introduced [`ZCAP-LD`](https://w3c-ccg.github.io/zcap-ld/)-like permissions to our JSON-RPC stack.
We used it to [implement](https://github.com/MetaMask/metamask-extension/pull/7004) what we called "LoginPerSite" in [version 7.7.0](https://github.com/MetaMask/metamask-extension/releases/tag/v7.7.0) of the extension, which enabled the user to choose which accounts, if any, should be exposed to each dapp.
While that was a worthwhile feature in and of itself, we wanted a permission _system_ in order to enable everything we are going to with Snaps.
Unfortunately, the original permission system was difficult to use, and necessitated the creation of the original `PermissionsController` (note the "s"), which was more or less a wrapper for `rpc-cap`.
With this PR, we shake off the yoke of the original permission system, in favor of the modular, self-contained, ergonomic, and more mature permission system 2.0.
Note that [the `PermissionController` readme](https://github.com/MetaMask/snaps-skunkworks/tree/main/packages/controllers/src/permissions/README.md) explains how the new permission system works.
The `PermissionController` and `SubjectMetadataController` are currently shipped via `@metamask/snap-controllers`. This is a temporary state of affairs, and we'll move them to `@metamask/controllers` once they've landed in prod.
## Changes in Detail
First, the changes in this PR are not as big as they seem. Roughly half of the additions in this PR are fixtures in the test for the new migration (number 68), and a significant portion of the remaining ~2500 lines are due to find-and-replace changes in other test fixtures and UI files.
- The extension `PermissionsController` has been deleted, and completely replaced with the new `PermissionController` from [`@metamask/snap-controllers`](https://www.npmjs.com/package/@metamask/snap-controllers).
- The original `PermissionsController` "domain metadata" functionality is now managed by the new `SubjectMetadataController`, also from [`@metamask/snap-controllers`](https://www.npmjs.com/package/@metamask/snap-controllers).
- The permission activity and history log controller has been renamed `PermissionLogController` and has its own top-level state key, but is otherwise functionally equivalent to the existing implementation.
- Migration number 68 has been added to account for the new state changes.
- The tests in `app/scripts/controllers/permissions` have been migrated from `mocha` to `jest`.
Reviewers should focus their attention on the following files:
- `app/scripts/`
- `metamask-controller.js`
- This is where most of the integration work for the new `PermissionController` occurs.
Some functions that were internal to the original controller were moved here.
- `controllers/permissions/`
- `selectors.js`
- These selectors are for `ControllerMessenger` selector subscriptions. The actual subscriptions occur in `metamask-controller.js`. See the `ControllerMessenger` implementation for details.
- `specifications.js`
- The caveat and permission specifications are required by the new `PermissionController`, and are used to specify the `eth_accounts` permission and its JSON-RPC method implementation.
See the `PermissionController` readme for details.
- `migrations/068.js`
- The new state should be cross-referenced with the controllers that manage it.
The accompanying tests should also be thoroughly reviewed.
Some files may appear new but have just moved and/or been renamed:
- `app/scripts/lib/rpc-method-middleware/handlers/request-accounts.js`
- This was previously implemented in `controllers/permissions/permissionsMethodMiddleware.js`.
- `test/mocks/permissions.js`
- A truncated version of `test/mocks/permission-controller.js`.
Co-authored-by: Mark Stacey <markjstacey@gmail.com>
* integration for tx decoding confirmation and history view
* upgrading @truffle/decoder to latest release 5.1.0
* Update acorn and colors patches
* feat: remove redundant styling
* feat: basic integration for nickname components
* feat: wiring functionality of adding new nickname
* feat: wire functionality of showing nickname modal
* feat: link the nickname popover with add/update popover
* feat: moving forward with address nicknames integration
* feat: fixing a bug related to passing chainId in addressBook
* feat: populating memo prop in addressbook entry
* feat: add explorer link
* feat: bug fixing update nickname component
* feat: fix proptypes
* feat: adding tooltip for copying nickname address
* featL fix styling for tx-details page
* feat: optimize code for error handling
* feat: limiting transaction decoding to tx with data
* feat: remove tree UI component
* feat: adding request to check for tx decoding supported networks
* feat: showing data hex component
* feat: fix react warnings
* feat: remove extra margin in tx decoding
* Remove unused package @truffle/source-map-utils
* Ensure messages get translated
* feat: link tx-decoding addresses with nicknames
* Omit value for boolean attributes
* Fix props reading in CopyRawData
* fix: fixing issue with transaltion
* Fix lint errors in TransactionDecoding
- Remove unused import
- Reorder imports
- Address conflict between caught `error` and error state flag by
renaming state flag to `hasError`
- Fix requestUrl identifier casing and use of template string
- Ensure `useEffect` gets passed the deps it needs
- Add scope braces around case statement where it's needed
- Omit literal `true` for boolean jsx attribute
- Refactor nested ternary as `if` statements
* fix: revert fetchWithCache modifications
* Fix linting for TransactionListItemDetails
- Remove unused import
- Fix import spacing
- Remove unused prop dereference
- Fix string interpolation for translated From/To
* Moving to popover pattern
* fix: sass color variable
* Omit value for boolean attribute
* Remove changes from modal.js
* fix: refactor nickname popovers
* Ensure const gets declared before it's used
* Fix linting for ConfirmTransactionBase
- Remove unused prop chainId
- Stop destructuring an unused field
* fix: refactor usage of nicknames popovers in send-content-container
* fix: remove extra prop updateAccountNicknameModal
* fix: refactor code for address.component
* fix: remove extra tooltip
* Ensure NicknamePopovers always returns component
* Fix linting for NicknamePopover component
- Fix useCallback deps
- Switch ternary to logical-or
* Fix linting for SenderToRecipient
... by fixing import order
* Remove unused addressCopied state
* Delete empty file
* fix: remove sender-to-recipient.container
* fix: refactor usage of nickname popovers in confirm-page-container
* fix: bug related to state variable
* Stylelint fix
* Lint fix
* Change "Total Amount" to "Total"
* Lint fix locales
* Update address-book.spec.js
* e2e test update
* Update e2e tests
* Fix issue where absence of function params in data hex tab would result in rendering a string
* Fix border radius, and width and height in small notification windows, of the update-nickname-popover
* Remove fake await
* Clean up
* Clean up
Co-authored-by: Alaa Hadad <alaahd@Alaas-MacBook-M1-Pro-14-inch.local>
Co-authored-by: Dan Miller <danjm.com@gmail.com>
Co-authored-by: g. nicholas d'andrea <gnidan@trufflesuite.com>
* Add support for eip-1559 on Trezor
* temp
* Lint fix
* Store trezor model type in background state instead attempting to get it in the frontend
* code simplification
* Temp update to eth-trezor-keyring version
* Tempory update to eth-trezor-keyring version
* Temp update to eth-trezor-keyring version
* Fix display of hdpath selector in connect hardware flow for trezor
* Updating the package version but we still need to run yarn setup and update the lockfile, once the package is updated
* Update yarn.lock
* Fix unit tests
* support qr based signer
* add CSP for fire fox
* get QR Hardware wallet name from device
* fix qrHardware state missing in runtime
* support qr based signer sign transaction
* refine Request Signature modal ui
* remove feature toggle
* refine ui
* fix notification is closing even there is a pending qr hardware transaction
* add chinese translation, refine ui, fix qr process was breaking in some case
* support import accounts by pubkeys
* refine qr-based wallet ui and fix bugs
* update @keystonehq/metamask-airgapped-keyring to fix that the signing hd path was inconsistent in some edge case
* fix: avoid unnecessay navigation, fix ci
* refactor qr-hardware-popover with @zxing/browser
* update lavamoat policy, remove firefox CSP
* refine qr reader ui, ignore unnecessary warning display
* code refactor, use async functions insteads promise
Co-authored-by: Soralit <soralitria@gmail.com>
* Add CollectiblesController
* bump controllers version
* add CollectibleDetectionController
* adapt to ERC1155 support changes in CollectiblesController
* update @metamask/controllers to v20.0.0
* update lavamoat policy files
* put collectibleDetectionController instantiation behind feature flag
`improved-yarn-audit` has been updated so that it supports GitHub
advisories. Two new GitHub advisories have been ignored, as they are
both moderate RegExp DoS vulnerabilities that don't affect us, and they
are embedded deep within our dependency graph and are difficult to
update.
Most notably this adds the ability to manage multiple Lattice/SafeCard
wallets simultaneously. If a user makes a request from an address not
associated with the device's active wallet, an error will display.
See: https://github.com/GridPlus/eth-lattice-keyring/pull/19
We're bumping from `^6` to `^8`. All imports are now named, and they have been updated. This is a breaking change, in that support for `eth_signTransaction` is added in `^8.0.0`. We do not support this method in our UI, so our middleware stack has been instrumented to reject.
In addition, there are some non-breaking behavioral changes in this version that reviewers should be aware of, see the [7.0.0 release](https://github.com/MetaMask/eth-json-rpc-middleware/releases).
* Support for Layer 2 networks with transaction fees on both layers
* Use variable name in transaction-breakdown
* Add comment on code source to ui/helpers/utils/optimism/fetchEstimatedL1Fee.js
* Fix unit tests
* Ensure values passed to are defined
* Fix activity log
* GridPlus: Adds support for GridPlus Lattice1 hardware wallet
* Fixes issue with switching hardware HD path
The main `Select HD Path` piece of the account selection component was not
properly hooked up to the state manager (`onPathChange`) and the extra
`Popover` component was being used instead.
I'm not sure what the origin of this is, but I don't see why the Popover
is needed at all. I have remove it and hooked `onPathChange` directly into
the HD path selector dropdown.
This was an issue that nearly every Lattice user who had come from Ledger
has contacted us about.
* GridPlus: Addresses QA issues
* Adds Lattice tutorial + image
* Cleans up connectivity issues (see: https://github.com/GridPlus/eth-lattice-keyring/pull/16)
* GridPlus: Adds Firefox support
To connect to the Lattice you need to open a new tab/window and get
login data from it. We were not able to do this for Firefox because
we relied on the `window` API. This is now fixed.
See corresponding changes:
* `eth-lattice-keyring`: https://github.com/GridPlus/eth-lattice-keyring/pull/17
* Lattice connector: https://github.com/GridPlus/wallet-web/pull/152
* GridPlus: Adds missing error path for Firefox
See: 242a93f559
* Check if ledger was successfully able to establish transport on mount of confirm screens
* Update ledger message/action if transport creation was blocked by existing connection
* TEMP: point eth-ledger-bridge-keyring to commite, REMOVE BEFORE MERGE
* Update eth-ledger-bridge-keyring to v0.10.0
This PR enables the exclusion of JavaScript and JSON source by `buildType`, and enables the running of `eslint` under LavaMoat. 80-90% of the changes in this PR are `.patch` files and LavaMoat policy additions.
The file exclusion is designed to work in conjunction with our code fencing. If you forget to fence an import statement of an excluded file, the application will now error on boot. **This PR commits us to a particular naming convention for files intended only for certain builds.** Continue reading for details.
### Code Fencing and ESLint
When a file is modified by the code fencing transform, we run ESLint on it to ensure that we fail early for syntax-related issues. This PR adds the first code fences that will be actually be removed in production builds. As a consequence, this was also the first time we attempted to run ESLint under LavaMoat. Making that work required a lot of manual labor because of ESLint's use of dynamic imports, but the manual changes necessary were ultimately quite minor.
### File Exclusion
For all builds, any file in `app/`, `shared/` or `ui/` in a sub-directory matching `**/${otherBuildType}/**` (where `otherBuildType` is any build type except `main`) will be added to the list of excluded files, regardless of its file extension. For example, if we want to add one or more pages to the UI settings in Flask, we'd create the folder `ui/pages/settings/flask`, add any necessary files or sub-folders there, and fence the import statements for anything in that folder. If we wanted the same thing for Beta, we would name the directory `ui/pages/settings/beta`.
As it happens, we already organize some of our source files in this way, namely the logo JSON for Beta and Flask builds. See `ui/helpers/utils/build-types.js` to see how this works in practice.
Because the list of ignored filed is only passed to `browserify.exclude()`, any files not bundled by `browserify` will be ignored. For our purposes, this is mostly relevant for `.scss`. Since we don't have anything like code fencing for SCSS, we'll have to consider how to handle our styles separately.
Static files have been added for the Flask build. This includes logos
of each size and variety that we use, and it includes the 3D model JSON
file.
Closes#12427
The new logo update includes the gradient feature.
The version of `jsdom` we're using via Jest has also been updated in
the lockfile. This was necessary to get unit tests to pass because the
version we were using previously didn't support `replaceChildren`,
which was added in `jsdom@6.6.0` [1].
[1]: 04f6c13f4a
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
On an M1 Mac, when running `yarn start`, CPU can spike to 100% CPU, and
sometimes a bunch of `mdworker` instances will get spawned. This seems
to be caused by the file-watching mechanism used in dev to automatically
regenerate the build when something is changed. More specifically, we
are using an older version of `watchify`, which uses an older version of
`chokidar`, which is the package that actually does the watching. v4.0.0
of `watchify` upgrades `chokidar` to v3.x ([1]), which comes with
"massive CPU & RAM consumption improvements" ([2]). After the upgrade,
CPU usage decreases to 20-40%.
[1]: https://github.com/browserify/watchify/blob/master/CHANGELOG.md#400
[2]: https://github.com/paulmillr/chokidar/releases/tag/3.0.0
* Connect ledger via webhid if that option is available
* Explicitly setting preference for webhid
* Use ledgerTransportType enum instead of booleans for ledger live and webhid preferences
* Use single setLEdgerTransport preference methods and property
* Temp
* Lint fix
* Unit test fix
* Remove async keyword from setLedgerTransportPreference function definition in preferences controller
* Fix ledgelive setting toggle logic
* Migrate useLedgerLive preference property to ledgerTransportType
* Use shared constants for ledger transport type enums
* Use constant for ledger usb vendor id
* Use correct property to check if ledgerLive preference is set when deciding whether to ask for webhid connection
* Update eth-ledger-bridge-keyring to v0.9.0
* Only show ledger live transaction helper messages if using ledger live
* Only show ledger live part of tutorial if ledger live setting is on
* Fix ledger related prop type errors
* Explicitly use u2f enum instead of empty string as a transport type; default transport type to webhid if available; use constants for u2f and webhid
* Cleanup
* Wrap ledger webhid device request in try/catch
* Clean up
* Lint fix
* Ensure user can easily connect their ledger wallet when they need to.
* Fix locales
* Fix/improve locales changes
* Remove unused isFirefox property from confirm-transaction-base.container.js
* Disable transaction and message signing confirmation if ledger webhid requires connection
* Ensure translation keys for ledger connection options in settings dropdown can be properly detected by verify-locales
* Drop .component from ledger-instruction-field file name
* Move renderLedgerLiveStep to module scope
* Remove ledgerLive from function and message names in ledger-instruction-field
* Wrap ledger connection logic in ledger-instruction-field in try catch
* Clean up signature-request.component.js
* Check whether the signing address, and not the selected address, is a ledger account in singature-request.container
* Ensure ledger instructions and webhid connection button are shown on signature-request-original signatures
* Improve webhid selection handling in select-ledger-transport-type onChange handler
* Move metamask redux focused ledger selectors to metamask duck
* Lint fix
* Use async await in checkWebHidStatusRef.current
* Remove unnecessary use of ref in ledger-instruction-field.js
* Lint fix
* Remove unnecessary try/catch in ledger-instruction-field.js
* Check if from address, not selected address, is from a ledger account in confirm-approve
* Move findKeyringForAddress to metamask duck
* Fix typo in function name
* Ensure isEqualCaseInsensitive handles possible differences in address casing
* Fix Learn More link size in advanced settings tab
* Update app/scripts/migrations/066.js
Co-authored-by: Mark Stacey <markjstacey@gmail.com>
* Update ui/pages/settings/advanced-tab/advanced-tab.component.test.js
Co-authored-by: Mark Stacey <markjstacey@gmail.com>
* Add jsdoc comments for new selectors
* Use jest.spyOn for mocking navigator in ledger webhid migration tests
* Use LEDGER_TRANSPORT_TYPES values to set proptype of ledgerTransportType
* Use LEDGER_TRANSPORT_TYPES values to set proptype of ledgerTransportType
* Fix font size of link in ledger connection description in advanced settings
* Fix return type in setLedgerTransportPreference comment
* Clean up connectHardware code for webhid connection in actions.js
* Update app/scripts/migrations/066.test.js
Co-authored-by: Mark Stacey <markjstacey@gmail.com>
* Update ui/ducks/metamask/metamask.js
Co-authored-by: Mark Stacey <markjstacey@gmail.com>
* Add migration test for when useLedgerLive is true in a browser that supports webhid
* Lint fix
* Fix inline-link size
Co-authored-by: Mark Stacey <markjstacey@gmail.com>
We were using an outdated version of the package `yazl` in our build
system, resulting in a Buffer warning during the production and test
builds about the use of the deprecated Buffer constructor.
`yazl` has been updated to the latest version, and no longer uses the
deprecated Buffer constructor that caused this warning.
The warning looked like this:
```
(node:52293) [DEP0005] DeprecationWarning: Buffer() is deprecated due to security and usability issues. Please use the Buffer.alloc(), Buffer.allocUnsafe(), or Buffer.from() methods instead.
```
`immer` has been updated to v9. This didn't require any changes on our
part; the only breaking changes are to the TypeScript types [1].
The `@reduxjs/toolkit` library has been updated as well, to ensure that
it's using the updated version of Immer internally as well. This update
makes our patch of that package obsolete, as the problematic pattern
that were were patching out is no longer present.
[1]: https://github.com/immerjs/immer/releases/tag/v9.0.0
* lavamoat - add lavamoat to webapp background
* test:e2e - add delay to resolve failure
* test:e2e - add delay to resolve failure
* build - add a switch for applying lavamoat, currently off for all
* test/e2e - remove delays added for lavamoat
* Revert "test/e2e - remove delays added for lavamoat"
This reverts commit 79c3479f15c072ed362ba1d4f1af41ea11a17d63.
The warnings about use of the unsafe Buffer constructor have been
addressed by package updates and patches.
The updates were:
* `gulp-sourcemaps` was updated from v2 to v3, and was patched to
replace remaining uses of the `Buffer` constructor
* Upstream PR: https://github.com/gulp-sourcemaps/gulp-sourcemaps/pull/388
* The transitive dependency `yazl` was updated from v2.4.3 to v2.5.1
in the lockfile.
* The abandoned packages `combine-source-map` and `inline-source-map`
were patched.
The dependency `caniuse-lite` has been updated using a Yarn resolution,
because it was pinned to a specific version by some dependencies. All
versions requested in our dependency tree are 1.x so this did not
introduce any breaking changes.
This resolves a frequent console warning that shows up during builds,
and when running tests and the linter.
* bump @metamask/controllers to v15.0.1 and remove AbortController workaround in e2e tests
* remove old abortcontroller polyfill
* bump @metamask/controllers to v15.0.2
There are a few issues encountered when running `yarn setup` on new
Apple Silicon (aka M1, aka arm64) Macs:
* The script halts when attempting to run the install step for
the `chromedriver` package with the message "Only Mac 64 bits
supported". This is somewhat misleading as it seems to indicate that
chromedriver can only be installed on a 64-bit Mac. However, what I
think is happening is that the installation script for `chromedriver`
is not able to detect that an arm64 CPU *is* a 64-bit CPU. After
looking through the `chromedriver` repo, it appears that 87.0.1 is the
first version that adds a proper check ([1]).
Note that upgrading chromedriver caused the Chrome-specific tests to
fail intermittently on CI. I was not able to 100% work out the reason
for this, but ensuring that X (which provides a way for Chrome to run
in a GUI setting from the command line) is available seems to fix
these issues.
* The script also halts when attempting to run the install step for
the `electron` package. This happens because for the version of
`electron` we are using (9.4.2), there is no available binary for
arm64. It appears that Electron 11.x was the first version to support
arm64 Macs ([2]). This is a bit trickier to resolve because we don't
explicitly rely on `electron` — that's brought in by `react-devtools`.
The first version of `react-devtools` that relies on `electron` 11.x
is 4.11.0 ([3]).
[1]: 469dd0a6ee
[2]: https://www.electronjs.org/blog/apple-silicon
[3]: https://github.com/facebook/react/blob/main/packages/react-devtools/CHANGELOG.md#4110-april-9-2021
* EIP-1559 - Provide support for Ledger
* Update ui/selectors/selectors.js
Co-authored-by: Mark Stacey <markjstacey@gmail.com>
* Add shared constants for hw types
* bump eth-ledger-bridge-keyring to v0.7.0
Co-authored-by: David Walsh <davidwalsh83@gmail.com>
Co-authored-by: Mark Stacey <markjstacey@gmail.com>
Co-authored-by: Alex <adonesky@gmail.com>
Adds the latest version of `@metamask/controllers`, and updates our usage of the `ApprovalController`, which has been migrated to `BaseControllerV2`. Of [the new `controllers` release](https://github.com/MetaMask/controllers/releases/tag/v15.0.0), only the `ApprovalController` migration should be breaking.
This is the first time we use events on the `ControllerMessenger` to update the badge, so I turned the messenger into a property on the main `MetaMaskController` in order to subscribe to events on it in `background.js`. I confirmed that the badge does indeed update during local QA.
As it turns out, [MetaMask/controllers#571](https://github.com/MetaMask/controllers/pull/571) was breaking for a single unit test case, which is now handled during setup and teardown for the related test suite (`metamask-controller.test.js`).
This update includes just configuration updates. There are no
functional changes. The updated config is only used as a fallback in
case the config update fails for some reason.
* add metametrics wrapper
* add history dep
* provide test data and mock react router
* add first confirmaion screen
* figure out a way to mock match.params
* render token approval with data
* fix lockfile
* fix lint
* remove use effect
* lintfix
* add . for src paths
* litfix
* Add knobs to change redux store for confirm-approve component (Storybook) (#11135)
* add knob for domain
* knobify
* remove logs
* remove comment
* lintfix
* fix comments
* add background calls + metriccs event to storybook acctions
* lintfixxxx
This update includes a bug fix that made v9.0.1 incompatible with valid
entries for the `package.json` "repository" field. Specifically, that
field required that the repository be the GitHub repo URL, but the
field is meant to point at the _git_ repo URL (the difference between
the two on GitHub is the `.git` suffix).
Now that that bug as been fixed, we can update the `repository` field
to point at `https://github.com/MetaMask/metamask-extension.git`, which
is what it should be.
The CurrencyRateController has been migrated to the BaseControllerV2
API, which includes various API changes. These changes include:
* The constructor now expects to be passed a
`RestrictedControllerMessenger`.
* State changes are subscribed to via the `ControllerMessenger` now,
rather than via a `subscribe` function.
* The state and configration are passed in as one "options" object,
rather than as two separate parameters
* The polling needs to be started explicitly by calling `start`. It
can be stopped and started on-demand now as well.
* Changing the current currency or native currency will now throw an
error if we fail to update the conversion rate.
The `ComposableObservableStore` has been updated to accomodate these
new types of controllers. The constructor has been updated to use an
options bag pattern as well, to make the addition of the new required
`controllerMessenger` parameter a bit less unweildly.
Update `@metamask/controllers` from v6 to v8. The breaking changes were
all in controllers that aren't used by the extension, so no changes
were required.
A resolution was required to update the version of `lodash` used by
`ganache-core`, and a previous resolution required updating. All other
lodash instances in our dependency tree were within range, and could be
updated in the lockfile.
The `auto-changelog` script has been replaced with the package
`@metamask/auto-changelog`. This package includes a script that has
an `update` command that is roughly equivalent to the old
`auto-changelog.js` script, except better. The script also has a
`validate` command.
The `repository` field was added to `package.json` because it's
utilized by the `auto-changelog` script, and this was easier than
specifying the repository URL with a CLI argument.
* Swaps: Show a network name dynamically in a tooltip
* Replace “Ethereum” with “$1”, change “Test” to “Testnet”
* Replace 이더리움 with $1
* Translate network names, use ‘Ethereum’ by default if a translation is not available yet
* Reorder messages to resolve ESLint issues
* Add a snapshot test for the FeeCard component, increase Jest threshold
* Enable snapshot testing into external .snap files in ESLint
* Add the “networkNameEthereum” key in ko/messages.json, remove default “Ethereum” value
* Throw an error if chain ID is not supported by the Swaps feature
* Use string literals when calling the `t` fn,
* Watch Jest tests silently (no React warnings in terminal, only errors)
* Add @testing-library/jest-dom, import it before running Jest tests
* Add snapshot testing of Swaps’ React components for happy paths, increase minimum threshold for Jest
* Add the test/jest folder for Jest setup and shared functions, use it in Swaps Jest tests
* Fix ESLint issues, update linting config
* Enable ESLint for .snap files (Jest snapshots), throw an error if a snapshot is bigger than 50 lines
* Don’t run lint:fix for .snap files
* Move `createProps` outside of `describe` blocks, move store creation inside tests
* Use translations instead of keys, update a rendering function to load translations
* Make sure all Jest snapshots are shorter than 50 lines (default limit)
* Add / update props for Swaps tests
* Fix React warnings when running tests for Swaps
* Setup jest config
* Adjust test for jest.
* Adjust lint config
* Omit swaps ui folder for unit testing
* Omit swaps from test:unit:lax
* Add jest.config.js to script files
* Restore mocks rather than clearing them.
* Update jest config and adjust lint to include subdirs
* Convert view-quote-price-difference test to jest
* Add jest ci and ci coverage scripts. Add jest unit test to general test command
* Add test coverage to ci
* Use --ignore flag
* Fixup
* Add @metamask/eslint-config-jest
* Update .eslintrc.js
Co-authored-by: Mark Stacey <markjstacey@gmail.com>
* Adds jest-coverage/
Co-authored-by: Mark Stacey <markjstacey@gmail.com>
The `auto-changelog.js` script has been refactoring into various
different modules. This was done in preparation for migrating this to
a separate repository, where it can be used in our libraries as well.
Functionally this should act _mostly_ the same way, but there have been
some changes. It was difficult to make this a pure refactor because of
the strategy used to validate the changelog and ensure each addition
remained valid. Instead of being updated in-place, the changelog is now
parsed upfront and stored as a "Changelog" instance, which is a new
class that was written to allow only valid changes. The new changelog
is then stringified and completely overwrites the old one.
The parsing had to be much more strict, as any unanticipated content
would otherwise be erased unintentionally. This script now also
normalizes the formatting of the changelog (though the individual
change descriptions are still unformatted).
The changelog stringification now accommodates non-linear releases as
well. For example, you can now release v1.0.1 *after* v2.0.0, and it
will be listed in chronological order while also correctly constructing
the `compare` URLs for each release.
* update ses
* build - reference ses directly
* deps - unify regenerator-runtime versions on 0.13.7
* patches - apply regenerator-runtime ses compat patch\nhttps://github.com/facebook/regenerator/pull/411
* patches - patch regenerator-runtime for latest ses fix
* reduc patch, new lockdown severe override taming
* updated redux patch
* update redux patch for production
* ignore lockdown in lint
* deps - bump patch-package just in case
* trailing comma
* remove ses as dep
* fix path for frozen promise
* remove js extension in lockdown require
* Revert "ignore lockdown in lint"
This reverts commit 8cefdc94dd25d7781bb09eed8af36441397676da.
* Revert "build - reference ses directly"
This reverts commit 30371a377dcdd781c1bf9abe55e9c8ae34da26b5.
* deps - update ses
* Revert "fix path for frozen promise"
This reverts commit 966e4c60921a25befe8ca8dea58313cc25852f72.
Co-authored-by: kumavis <aaron@kumavis.me>
* deps - remove remotedev-server
* Remove stale references from allow-scripts config
Any packages that are no longer in the dependency tree have been
removed from the `allow-scripts` config.
Co-authored-by: Mark Stacey <markjstacey@gmail.com>
The `elliptic` package has been updated to v6.5.4 to address a security
advisory regarding a vulnerability in v6.5.3. We are not affected by
this vulnerability to the best of our knowledge. This is just to stay
on the safe side, and fix our audit check.
* Add warning system for 'confusable' ENS names (#9129)
Uses unicode.org's TR39 confusables.txt to display a warning when
'confusable' unicode points are detected.
Currently only the `AddRecipient` component has been updated, but the new
`Confusable` component could be used elsewhere
The new `unicode-confusables` dependency adds close to 100KB to the
bundle size, and around 30KB when gzipped.
Adds 'tag' prop to the tooltop-v2 component
Use $Red-500 for confusable ens warning
Lint Tooltip component
Update copy for confusing ENS domain warning.
* Fix prop type
Co-authored-by: Mark Stacey <markjstacey@gmail.com>
This package hasn't been used since #8140, which dropped it for being
too slow and of minimal benefit.
We should consider re-adding this as a CI check to ensure images are
optimized, but I don't think it should be re-added to the build process
itself.
This package was added as a devDependency to address a peerDependency
warning when installing Storybook v5.3.14. We're now using Storybook
v6, which doesn't list this as a peerDependency.
The packages `eth-sig-util` and `ethashjs` have been updated to their
latest in-range versions in the lockfile. This removes the last
instance of `ethereumjs-abi@0.6.5` from our dependency tree, as well as
the last non-optional instance of `sha3` (it's still present as a
transitive dependency of an optional development dependency via
`ganache`)
Fixes#10356
There was a bug in the inpage provider that would mistakenly report
usage of our injected `web3` instance when the `web3.currentProvider`
property was accessed. This was fixed in v8.0.4 of
`@metamask/inpage-provider`.
* use @lavamoat/allow-scripts for package postinstall allow list
* dnode: set "weak" to false
Co-authored-by: kumavis <kumavis@users.noreply.github.com>
Co-authored-by: Erik Marks <25517051+rekmarks@users.noreply.github.com>
The changes made between v1.3.2 and v1.5.0 of `@reduxjs/toolkit` don't
appear to affect us at all. They mostly consist of feature additions
and bug fixes for edge cases we haven't encountered.[1]
The one change that is technically breaking is that v8 of `immer` now
freezes state objects in production rather than just in development.
That would only be breaking if we were mutating Redux state though,
which we aren't doing in the few Redux slices in which we use
`@reduxjs/toolkit`. Even if we were, we would have noticed that it
broke in development already.
[1]: https://github.com/reduxjs/redux-toolkit/releases
This update comes with a breaking change to the Approval controller. It
now requires a `defaultApprovalType` parameter.
I don't think we have any use for a default approval type, but I've
added a "NO_TYPE" one for now because it's a strict requirement. We
should consider making this parameter optional in the future, for cases
like this where it's not needed.
This update will hopefully address some caching issues we've been
seeing with our phishing configuration. See here for more details:
https://github.com/MetaMask/controllers/pull/297
We don't look at coveralls very much. We might occasionally consult it
to see a report on our code coverage, but that report is already
generated entirely locally, and has been added to the MetaMask bot
comment in #10061.
Update `geckodriver` to the latest version, and `selenium-webdriver`
to the second-most-recent version. Updates include various dependency
updates, bug fixes, and minor features. None of the updates seem to
directly affect us, aside from one new feature of `selenium-webdriver`
that updates the `installAddon` function to support `.zip` files, which
will be used in a subsequent PR.
`selenium-webdriver` was pinned one version behind latest because the
latest version caused our Chrome e2e tests to fail with a mysterious
error whenever `getAttribute` was called on a WebElement.
The `eth_decrypt` used to fail on Firefox with a recursion error.
Updating these `tweetnacl` dependencies seemed to have fixed the issue
the last time I tested this.
When I tried to reproduce the failure today, it failed due to a
different reason, both before and after this update.
But nonetheless, it still seems like a good idea to update. These newer
versions have no breaking changes and contain important bug fixes.
* @metamask/inpage-provider@^8.0.0
* Replace public config store with JSON-RPC notifications
* Encapsulate notification permissioning in permissions controller
* Update prefix of certain internal RPC methods and notifications
* Add accounts to getProviderState
* Send accounts with isUnlocked notification (#10007)
* Rename provider streams, notify provider of stream failures (#10006)
* Remove use of ethgassthat; use metaswap /gasPrices api for gas price estimates
* Remove references to ethgasstation
* Pass base to BigNumber constructor in fetchExternalBasicGasEstimates
* Update ui/app/hooks/useTokenTracker.js
Co-authored-by: Erik Marks <25517051+rekmarks@users.noreply.github.com>
* Delete gas price chart
* Remove price chart css import
* Delete additional fee chart code
* Lint fix
* Delete more code no longer used after ethgasstation removal
Co-authored-by: Erik Marks <25517051+rekmarks@users.noreply.github.com>
Our Storybook dependencies have been updated to v6.1.9, from v5. This
was done to address a security vulnerability in a transitive dependency
of these packages (`highlight.js`).
The primary changes required by this Storybook update were the change
in import path for the `withKnobs` hook, the change in background
config format, and the webpack configuration. Storybook seems to work
correctly.
The migration was guided by the Storybook changelog[1] and the
Storybook v6 migration guide[2].
There is one Storybook error remaining; it fails to load the Euclid
font. This is a pre-existing error though, so we can fix it in a later
PR.
The `yarn.lock` file was deduplicated in this PR as well, as it was
required to fix various install warnings that were introduced with this
update.
[1]: https://github.com/storybookjs/storybook/blob/next/CHANGELOG.md
[2]: https://github.com/storybookjs/storybook/blob/next/MIGRATION.md
* Freezeglobals: remove Promise freezing, add lockdown
* background & UI: temp disable sentry
* add loose-envify, dedupe symbol-observable
* use loose envify
* add symbol-observable patch
* run freezeGlobals after sentry init
* use require instead of import
* add lockdown to contentscript
* add error code in message
* try increasing node env heap size to 2048
* change back circe CI option
* make freezeGlobals an exported function
* make freezeGlobals an exported function
* use freezeIntrinsics
* pass down env to child process
* fix unknown module
* fix tests
* change back to 2048
* fix import error
* attempt to fix memory error
* fix lint
* fix lint
* fix mem gain
* use lockdown in phishing detect
* fix lint
* move sentry init into freezeIntrinsics to run lockdown before other imports
* lint fix
* custom lockdown modules per context
* lint fix
* fix global test
* remove run in child process
* remove lavamoat-core, use ses, require lockdown directly
* revert childprocess
* patch package postinstall
* revert back child process
* add postinstall to ci
* revert node max space size to 1024
* put back loose-envify
* Disable sentry to see if e2e tetss pass
* use runLockdown, add as script in manifest
* remove global and require from runlockdown
* add more memory to tests
* upgrade resource class for prep-build & prep-build-test
* fix lint
* lint fix
* upgrade remote-redux-devtools
* skillfully re-add sentry
* lintfix
* fix lint
* put back beep
* remove envify, add loose-envify and patch-package in dev deps
* Replace patch with Yarn resolution (#9923)
Instead of patching `symbol-observable`, this ensures that all
versions of `symbol-observable` are resolved to the given range, even
if it contradicts the requested range.
Co-authored-by: Mark Stacey <markjstacey@gmail.com>
`ganache-core` and `ganache-cli` have been updated to the latest
published versions.
Two Yarn resolutions have been made unnecessary by this update, so they
have been removed. They were added to update dependencies of
`ganache-core` to address security advisories. They have since been
updated in the latest `ganache-core` release.
* Add ses lockdown to build system using lavamoat-core
* use proper object.assign version
* disable lint rules for ses lockdown
* deps - update rtlcss
Co-authored-by: kumavis <aaron@kumavis.me>
Co-authored-by: Mark Stacey <markjstacey@gmail.com>
`@metamask/eslint-config` has been updated to v4.1.0. This update
requires that we update `eslint` to v7 as well, which in turn requires
updating most `eslint`-related packages.
Most notably, `babel-eslint` was replaced with `@babel/eslint-parser`,
and `babel-eslint-plugin` was replaced by `@babel/eslint-plugin`. This
required renaming all the `babel/*` rules to `@babel/*`.
Most new or updated rules that resulted in lint errors have been
temporarily disabled. They will be fixed and re-enabled in subsequent
PRs.
On Windows, spawn fails if the exact filename
of a binary isn't passed. e.g. `spawn('yarn')` fails
because the binary is named `yarn.cmd`.
Instead, we depend on `cross-spawn` which handles differences
in `spawn` across platforms.
All three of our Sentry packages have been updated to the latest
versions. There appear to have been no breaking changes - just bug
fixes and new features.
This change updates `node-forge` to the latest published version, 0.10.0. This
update resolves a security advisory [1] brought in via our `3box` dependency.
[1]:https://www.npmjs.com/advisories/1561
JSON files are now sorted by key with `prettier`, using the plugin
`prettier-plugin-sort-json`. This does not affect `package.json`
because `prettier` uses a special parser for that file, as it has
a more restrictive format than JSON.
Instead of using `eslint-plugin-json` for linting JSON files,
`prettier` is now used. `prettier` is capable of detecting and
correcting more problems than `eslint-plugin-json` can, such as
indentation.
All JSON files have been run through `prettier`. The changes are all
superficial.
* MetaMask mascot support for provided directions targets and toggling followMouse
* Fixes for mascot.component.js
* Update metamask-logo version to 2.4.0
* Lint fix
* Fix mouse follow updating
Co-authored-by: Mark Stacey <markjstacey@gmail.com>
* Improve mascot story name
Co-authored-by: Mark Stacey <markjstacey@gmail.com>
* Update package.json
Co-authored-by: Mark Stacey <markjstacey@gmail.com>
* Lint fix
Co-authored-by: Mark Stacey <markjstacey@gmail.com>
