Defaults have been added for all three preferences. The default values
added are both falsey, so this shouldn't result in any functional
change. This was done to help make this preferences more easily
discoverable.
The max listener count of the preferences store has been increased to
12. Recently the 12th listener was added, which resulted in console
warnings during the unit tests - this prevents those warnings.
The default max listener value is 10; we didn't see this warning until
now because one of the twelve listeners is only setup when 3Box is
enabled, which doesn't occur during our unit tests.
Add alert suggesting that the user switch to a connected account. This
alert is displayed when the popup is opened over an active tab that is
connected to some account, but not the current selected account. The
user can choose to switch to a connected account, or dismiss the alert.
This alert is only shown once per account switch. So if the user
repeatedly opens the popup on a dapp without switching accounts, it'll
only be shown the first time. The alert also won't be shown if the user
has just dismissed an "Unconnected account" alert on this same dapp
and account, as that would be redundant.
The alert has a "Don't show me this again" checkbox that allows the
user to disable the alert. It can be re-enabled again on the Alerts
settings page.
All transaction status updates were moved into a `setTimeout` callback
and wrapped in a `try...catch` block in #4131, apparently in an attempt
to prevent failures in event subscribers from interrupting the
transaction logic. The `try...catch` block did accomplish that, but by
putting the status update in a `setTimeout` callback the operation was
made asynchronous.
Transaction status updates now happen unpredictably, in some future
event loop from when they're triggered. This creates a race condition,
where the transaction status update may occur before or after
subsequent state changes. This also introduces a risk of accidentally
undoing a change to the transaction state, as the update made to the
transaction inside the `setTimeout` callback uses a reference to
`txMeta` obtained synchronously before the `setTimeout` call. Any
replacement of the `txMeta` between the `setTxStatus` call and the
execution of the timeout would be erased. Luckily the `txMeta` object
is more often than not mutated rather than replaced, which may explain
why we haven't seen this happen yet.
Everything seems to work correctly with the `setTimeout` call removed,
and now the transaction logic is easier to understand.
The unconnected account alert can now be disabled. A "don't show this
again" checkbox has been added to the alert, which prevents that alert
from being shown in the future.
An alert settings page has been added to the settings as well. This
page allows the user to disable or enable any alert.
This controller was not used. It was used by the
`ComputedBalancesController`, which was removed in #7057 (as it was
also unused).
The pending balances calculator was only used by the balances
controller.
The inactive timer was being reset upon any change to the preferences
store. The intent was only to update the timer when the auto-lock
timeout had changed, so the subscription was updated to only update in
those cases.
There are no indications that this had any effect upon the user. It
looks like the preferences store never updates while the extension is
unattended, so in practice this may have been harmless. It was still
pointless however. This also protects against the possibility of the
preferences store being updated while unattended at some point in the
future.
A race condition exists where after adding an unapproved transaction,
it could be mutated and then replaced when the default gas parameters
are set. This happens because the transaction is added to state and
broadcast before the default gas parameters are set, because
calculating the default gas parameters to use takes some time.
Once they've been calculated, the false assumption was made that the
transaction hadn't changed.
The method responsible for setting the default gas now retrieves an
up-to-date copy of `txMeta`, and conditionally sets the defaults only
if they haven't yet been set.
This race condition was introduced in #2962, though that PR also added
a loading screen that avoided this issue by preventing the user from
interacting with the transaction until after the gas had been
estimated. Unfortunately this loading screen was not carried forward to
the new UI.
* Remove `estimatedGas` property from `txMeta`
The `estimatedGas` property was a cache of the gas value estimated for
a transaction when the default gas limit was set. This property wasn't
used anywhere. It may have been useful for debugging purposes, but the
same gas estimate is already stored on the `history` property so it
should be present in state logs regardless.
* Remove `gasLimitSpecified` txMeta property
The `gasLimitSpecified` property of `txMeta` wasn't used for anything.
It might have been useful for debugging purposes, but whether or not
the gas limit was specified can also be determined from looking at the
transaction history, so it's not a huge loss.
* Remove `gasPriceSpecified` txMeta property
The `gasPriceSpecified` property of `txMeta` wasn't used for anything.
It might have been useful for debugging purposes, but whether or not
the gas price was specified can also be determined from looking at the
transaction history, so it's not a huge loss.
* Remove `simpleSend` txMeta property
The `simpleSend` property of `txMeta` was used to ensure a buffer was
not added to the gas limit during gas estimation for simple send
transactions. It was made redundant by #8484, which accomplishes this
without the use of this property.
Previously a transaction would get assigned a default value during the
`addTxGasDefaults` function, after the transaction was added and sent
to the UI.
Instead the transaction is assigned a default value before it gets
added. This flow is simpler to follow, and it avoids the race condition
where the transaction is assigned a value from the UI before this
default is set. In that situation, the UI-assigned value would be
overridden, which is obviously not desired.
`analyzeGasUsage` now returns the results of the analysis rather than
setting them directly on `txMeta`. The caller is now responsible for
mutating `txMeta` instead. Functionally this should be identical to
before.
The simple send gas estimation has been moved out of the gas estimation
module, and into the transaction controller. This was done in an effort
to limit the number of places where `txMeta` is mutated while the
default gas parameters are being set.
This state has been removed from the background. It was used for the
old UI, and has been unused for some time. A migration has been added
to delete this state as well.
The action creator responsible for updating this state has been removed
from the UI as well, along with the `callBackgroundThenUpdateNoSpinner`
convenience function, which was only used for this action.
* Add popover for informing user about the connected status indicator
* Ensure user only sees connected status info popover once
* Default connectedStatusPopoverHasBeenShown to true and set it to false in a migration
* Add unit test for migration 42
* Initialize AppStateController if it does not exist in migration 42
* Update connect indicator popup locale text
* Code cleanup for connected-indicator-info-popup
* Code cleanup for connected-indicator-info-popup
This method adds the given account to the given origin's list of
exposed accounts. This method is not yet used, but it will be in
subsequent PRs (e.g. #8312)
This method has been added to the background API, and a wrapper action
creator has been written as well.
Now that identities are available synchronously in the permissions
controller, accounts can be validated synchronously as well. Any
account the user wants to give permissions to should already be tracked
as an identity in the preferences controller.
* Fix order of accounts in `eth_accounts` response
The accounts returned by `eth_accounts` were in a fixed order - the
order in which the keyring returned them - rather than ordered with the
selected account first. The accounts returned by the `accountsChanged`
event were ordered with the selected account first, but the same order
wasn't used for `eth_accounts`.
We needed to store additional state in order to determine the correct
account order correctly on all dapps. We had only been storing the
current selected account, but since we also need to determine the
primary account per dapp (i.e. the last "selected" account among the
accounts exposed to that dapp), that wasn't enough.
A `lastSelected` property has been added to each identity in the
preferences controller to keep track of the last selected time. This
property is set to the current time (in milliseconds) whenever a new
selection is made. The accounts returned with `accountsChanged` and by
`eth_accounts` are both ordered by this property.
The `updatePermittedAccounts` function was merged with the internal
methods for responding to account selection, to keep things simpler. It
wasn't called externally anyway, so it wasn't needed in the public API.
* Remove caveat update upon change in selected account
The order of accounts in the caveat isn't meaningful, so the caveat
doesn't need to be updated when the accounts get re-ordered.
* Emit event regardless of account order
Now that we're no longer relying upon the caveat for the account order,
we also have no way of knowing if a particular account selection
resulted in a change in order or not. The notification is now emitted
whenever an exposed account is selected - even if the order stayed the
same.
The inpage provider currently caches the account order, so it can be
relied upon to ignore these redundant events. We were already emiting
redundant `accountsChanged` events in some cases anyway.
Selecting a new account now results in all domains that can view this
change being notified. Previously only the dapp in the active tab was
being notified (though not correctly, as the `origin` was accidentally
set to the MetaMask chrome extension origin).
This handling of account selection has been moved into the background
to minimize the gap between account selection and the notification
being sent out. It's simpler for the UI to not be involved anyway.
Previously all browser globals were allowed to be used anywhere by
ESLint because we had set the `env` property to `browser` in the ESLint
config. This has made it easy to accidentally use browser globals
(e.g. #8338), so it has been removed. Instead we now have a short list
of allowed globals.
All browser globals are now accessed as properties on `window`.
Unfortunately this change resulted in a few different confusing unit
test errors, as some of our unit tests setup assumed that a particular
global would be used via `window` or `global`. In particular,
`window.fetch` didn't work correctly because it wasn't patched by the
AbortController polyfill (only `global.fetch` was being patched).
The `jsdom-global` package we were using complicated matters by setting
all of the JSDOM `window` properties directly on `global`, overwriting
the `AbortController` for example.
The `helpers.js` test setup module has been simplified somewhat by
removing `jsdom-global` and constructing the JSDOM instance manually.
The JSDOM window is set on `window`, and a few properties are set on
`global` as well as needed by various dependencies. `node-fetch` and
the AbortController polyfill/patch now work as expected as well,
though `fetch` is only available on `window` now.
The tests for the detect-tokens controller were nearly all broken. They
have been fixed, and a few improvements were made to controller itself
to help with this.
* The core `detectNewTokens` method has been updated to be async, so
that the caller can know when the operation had completed.
* The part of the function that used `Web3` to check the token balances
has been split into a separate function, so that that part could be
stubbed out in tests. Eventually we should test this using `ganache`
instead, but this was an easier first step.
* The internal `tokenAddresses` array is now initialized on
construction, rather than upon the first Preferences controller update.
The `detectNewTokens` function would have previously failed if it ran
prior to this initialization, so it was failing if called before any
preferences state changes.
Additionally, the `detectTokenBalance` function was removed, as it was
no longer used.
The tests have been updated to ensure they're actually testing the
behavior they purport to be testing. I've simulated a test failure with
each one to check that it'd fail when it should. The preferences
controller instance was updated to set addresses correctly as well.
* Connect screen popup redesign
* Open permission request in notification instead of tab
* Remove no longer user locales
* Update permissions unit test mock to accout for change of opts passed to permissions controller
* Lint fix
* Inline broken line svg in permission-page-container-content.component.js for faster loading
* Add back button to second screen on connect flow
* Add xOfY locale and use for the page count in the connect flow
* Lint fix for svgs permission-page-container-content.component.js
* Fix rebase error
* Lint fix
* Clean up styles on the connect-screen-into-popup branch
* Use closeCurrentWindow to close window on cancel when in full screen connect flow
* Handle errors in rejectPermissionsRequest
* Full screen styles for connect flow
* Lint fixed in permissions-connect and actions.js
* Redirect screen now shows metamask icon instead of users identicon
* Fix subtitle spacing in permissions-connect-header'
* Use window.close instead of closeCurrentWindow() in cancelPermissionsRequest
* Use permissions-connect-header__subtitle in permissions-connect-header.component
The sidebar used to speed up a transaction while it's pending or after
it has failed currently allows editing the gas limit, but that new
limit is ignored. This is especially problematic for transactions that
failed due to a low gas limit, as the problem becomes impossible to fix
by retrying.
The gas limit specified by the user is now used in the speed up
transaction.
Fixes#8156Fixes#7977
Implement `eth_decrypt` and `eth_getEncryptionPublicKey`. This allows decryption backed by the user's private key. The message decryption uses a confirmation flow similar to the messaging signing flow, where the message to be decrypted is also able to be decrypted inline for the user to read directly before confirming.
This was done to reduce the number of direct dependencies we have. It
should be functionally equivalent. The bundle size should not change,
as we use `clone` as a transitive dependency in a number of places.
Update accounts permission history on accountsChanged
Create PermissionsLogController
Fix permissions activity log pruning
Add selectors, background hooks for better UX
Make selected account the first account returned
Use enums for store keys in log controller
Add last selected address history to PreferencesController
* Specify type before parameter name
Various JSDoc `@param` entries were specified as `name {type}` rather
than `{type} name`.
A couple of `@return` entries have been given types as well.
* Use JSDoc optional syntax rather than Closure syntax
* Use @returns rather than @return
* Use consistent built-in type capitalization
Primitive types are lower-case, and Object is upper-case.
* Separate param/return description with a dash
* Remove unused onboarding stream
* Pass `sender` through to `setupProviderEngine`
The Port `sender` has been passed down a few more layers. This allows
us to get more information from the sender deeper in the stack, but
also simplifies things a bit as well. For example, now the "fake"
URL object with the `metamask` hostname is no longer needed.
* Create onboarding middleware
This middleware intercepts `wallet_registerOnboarding` RPC messages. It
will register the sender as an oboarding initiator if possible, and
otherwise ignores the message.
The connect route now takes a route parameter: the permissions request
id. This id is set whenever the permissions connect screen is opened,
ensuring that that tab is for that specific request alone.
This makes handling of multiple permissions requests a bit more
intuitive. Previously whenever opening multiple permissions requests,
the first one would be shown on each successive tab, whereas you
would expect each tab to show the request that prompted the tab to
open. Users may now address permissions request in whichever order
they'd like to, rather than being forced to deal with them
chronologically.
Attempts to approve or reject a permissions request that is no longer
pending will now emit a warning instead of throwing an exception.
I _think_ this can happen by clicking 'Submit' on the Permission
Connect screen twice, though I've been unable to reproduce that. I know
that it can be done if using multiple windows though. While it is
possible we have a UI bug somewhere (e.g. maybe we're not preventing
'Submit' from being clicked twice), I don't think it's possible to
eliminate the chance of this happening altogether, so we'd best prepare
for it.
* add PermissionsController
remove provider approval controller
integrate rpc-cap
create PermissionsController
move provider approval functionality to permissions controller
add permissions approval ui, settings page
add permissions activity and history
move some functionality to metamask-inpage-provider
rename siteMetadata -> domainMetadata
add accountsChange notification to inpage provider
move functionality to inpage provider
update inpage provider
Remove 'Connections' settings page (#7369)
add hooks for exposing accounts in settings
rename unused messages in non-English locales
Add external extension id to metadata (#7396)
update inpage provider, rpc-cap
add eth_requestAccounts handling to background
prevent notifying connections if extension is locked
update inpage provider
Fix lint errors
add migration
review fixes
transaction controller review updates
removed unused messages
* Login Per Site UI (#7368)
* LoginPerSite original UI changes to keep
* First commit
* Get necessary connected tab info for redirect and icon display for permissioned sites
* Fix up designs and add missing features
* Some lint fixes
* More lint fixes
* Ensures the tx controller + tx-state-manager orders transactions in the order they are received
* Code cleanup for LoginPerSite-ui
* Update e2e tests to use new connection flow
* Fix display of connect screen and app header after login when connect request present
* Update metamask-responsive-ui.spec for new item in accounts dropdown
* Fix approve container by replacing approvedOrigins with domainMetaData
* Adds test/e2e/permissions.spec.js
* Correctly handle cancellation of a permissions request
* Redirect to home after disconnecting all sites / cancelling all permissions
* Fix display of site icons in menu
* Fix height of permissions page container
* Remove unused locale messages
* Set default values for openExternalTabs and tabIdOrigins in account-menu.container
* More code cleanup for LoginPerSite-ui
* Use extensions api to close tab in permissions-connect
* Remove unnecessary change in domIsReady() in contentscript
* Remove unnecessary private function markers and class methods (for background tab info) in metamask-controller.
* Adds getOriginOfCurrentTab selector
* Adds IconWithFallback component and substitutes for appropriate cases
* Add and utilize font mixins
* Remove unused method in disconnect-all.container.js
* Simplify buttonSizeLarge code in page-container-footer.component.js
* Add and utilize getAccountsWithLabels selector
* Remove console.log in ui/app/store/actions.js
* Change last connected time format to yyyy-M-d
* Fix css associated with IconWithFallback change
* Ensure tracked openNonMetamaskTabsIDs are correctly set to inactive on tab changes
* Code cleanup for LoginPerSite-ui
* Use reusable function for modifying openNonMetamaskTabsIDs in background.js
* Enables automatic switching to connected account when connected domain is open
* Prevent exploit of tabIdOriginMap in background.js
* Remove unneeded code from contentscript.js
* Simplify current tab origin and window opener logic using remotePort listener tabs.queryTabs
* Design and styling fixes for LoginPerSite-ui
* Fix permissionHistory and permission logging for eth_requestAccounts and eth_accounts
* Front end changes to support display of lastConnected time in connected and permissions screens
* Fix lint errors
* Refactor structure of permissionsHistory
* Fix default values and object modifications for domain and permissionsHistory related data
* Fix connecting to new accounts from modal
* Replace retweet.svg with connect-white.svg
* Fix signature-request.spec
* Update metamask-inpage-provider version
* Fix permissions e2e tests
* Remove unneeded delay from test/e2e/signature-request.spec.js
* Add delay before attempting to retrieve network id in dapp in ethereum-on=.spec
* Use requestAccountTabIds strategy for determining tab id that opened a given window
* Improve default values for permissions requests
* Add some message descriptions to app/_locales/en/messages.json
* Code clean up in permission controller
* Stopped deep cloning object in mapObjectValues
* Bump metamask-inpage-provider version
* Add missing description in app/_locales/en/messages.json
* Return promises from queryTabs and switchToTab of extension.js
* Remove unused getAllPermissions function
* Use default props in icon-with-fallback.component.js
* Stop passing to permissions controller
* Delete no longer used clear-approved-origins modal code
* Remove duplicate imports in ui/app/components/app/index.scss
* Use URL instead of regex in getOriginFromUrl()
* Add runtime error checking to platform, promise based extension.tab methods
* Support permission requests from external extensions
* Improve font size and colour of the domain origin on the permission confirmation screen
* Add support for toggling permissions
* Ensure getRenderablePermissionsDomains only returns domains with exposedAccount caveat permissions
* Remove unused code from LoginPerSite-ui branch
* Ensure modal closes on Enter press for new-account-modal.component.js
* Lint fix
* fixup! Login Per Site UI (#7368)
* Some code cleanup for LoginPerSite
* Adds UX for connecting to dapps via the connected sites screen (#7593)
* Adds UX for connecting to dapps via the connected sites screen
* Use openMetaMaskTabIds from background.js to determine if current active tab is MetaMask
* Delete unused permissions controller methods
* Fixes two small bugs in the LoginPerSite ui (#7595)
* Restore `providerRequest` message translations (#7600)
This message was removed, but it was replaced with a very similar
message called `likeToConnect`. The only difference is that the new
message has "MetaMask" in it. Preserving these messages without
"MetaMask" is probably better than deleting them, so these messages
have all been restored and renamed to `likeToConnect`.
* Login per site no sitemetadata fix (#7610)
* Support connected sites for which we have no site metadata.
* Change property containing subtitle info often populated by origin to a more accurate of purpose name
* Lint fix
* Improve disconnection modal messages (#7612)
* Improve disconnectAccountModalDescription and disconnectAllModalDescription messages
* Update disconnectAccountModalDescription app/_locales/en/messages.json
Co-Authored-By: Mark Stacey <markjstacey@gmail.com>
* Improve disconnectAccount modal message clarity
* Adds cancel button to the account selection screen of the permissions request flow (#7613)
* Fix eth_accounts permission language & selectability (#7614)
* fix eth_accounts language & selectability
* fix MetaMask capitalization in all messages
* Close sidebar when opening connected sites (#7611)
The 'Connected Sites' button in the accounts details now closes the
sidebar, if it is open. This was accomplished by pulling the click
handler for that button up to the wallet view component, where another
button already followed a similar pattern of closing the sidebar.
It seemed confusing to me that one handler was in the `AccountsDetails`
container component, and one was handed down from above, so I added
PropTypes to the container component.
I'm not sure that the WalletView component is the best place for this
logic, but I've put it there for now to be consistent with the add
token button.
* Reject permissions request upon tab close (#7618)
Permissions requests are now rejected when the page is closed. This
only applies to the full-screen view, as that is the view permission
requests should be handled in. The case where the user deals with the
request through a different view is handled in #7617
* Handle tab update failure (#7619)
`extension.tabs.update` can sometimes fail if the user interacts with
the tabs directly around the same time. The redirect flow has been
updated to ensure that the permissions tab is still closed in that
case. The user is on their own to find the dapp tab again in that case.
* Login per site tab popup fixes (#7617)
* Handle redirect in response to state update in permissions-connect
* Ensure origin is available to permissions-connect subcomponents during redirect
* Hide app bar whenever on redirect route
* Improvements to handling of redirects in permissions-connect
* Ensure permission request id change handling only happens when page is not null
* Lint fix
* Decouple confirm transaction screen from the selected address (#7622)
* Avoid race condtion that could prevent contextual account switching (#7623)
There was a race condition in the logic responsible for switching the
selected account based upon the active tab. It was asynchronously
querying the active tab, then assuming it had been retrieved later.
The active tab info itself was already in the redux store in another
spot, one that is guaranteed to be set before the UI renders. The
race condition was avoided by deleting the duplicate state, and using
the other active tab state.
* Only redirect back to dapp if current tab is active (#7621)
The "redirect back to dapp" behaviour can be disruptive when the
permissions connect tab is not active. The purpose of the redirect was
to maintain context between the dapp and the permissions request, but
if the user has already moved to another tab, that no longer applies.
* Fix JSX style lint errors
* Remove unused state
* Ensures the tx controller + tx-state-manager orders transactions in the order they are received
* Handle transaction ordering in cases where tx ids are off by more than 1 in tx-state-manager
* Add comment to addUnapprovedTransaction explaining calling _determineTransactionCategory after generateTxMeta
* Sort txes by timestamp of creation instead of id
* Add support for one-click onboarding
MetaMask now allows sites to register as onboarding the user, so that
the user is redirected back to the initiating site after onboarding.
This is accomplished through the use of the `metamask-onboarding`
library and the MetaMask forwarder.
At the end of onboarding, a 'snackbar'-stype component will explain to the
user they are about to be moved back to the originating dapp, and it will
show the origin of that dapp. This is intended to help prevent phishing
attempts, as it highlights that a redirect is taking place to an untrusted
third party.
If the onboarding initiator tab is closed when onboarding is finished,
the user is redirected to the onboarding originator as a fallback.
Closes#6161
* Add onboarding button to contract test dapp
The `contract-test` dapp (run with `yarn dapp`, used in e2e tests) now
uses a `Connect` button instead of connecting automatically. This
button also serves as an onboarding button when a MetaMask installation
is not detected.
* Add new static server for test dapp
The `static-server` library we were using for the `contract-test` dapp
didn't allow referencing files outside the server root. This should
have been possible to work around using symlinks, but there was a bug
that resulted in symlinks crashing the server.
Instead it has been replaced with a simple static file server that
will serve paths starting with `node_modules` from the project root.
This will be useful in testing the onboarding library without vendoring
it.
* Add `@metamask/onboarding` and `@metamask/forwarder`
Both libraries used to test onboarding are now included as dev
dependencies, to help with testing. A few convenience scripts
were added to help with this (`yarn forwarder` and `yarn dapp-forwarder`)
The 'reverseResolveAddress' method is intended to return undefined if
unable to reverse resolve the given address. Instead it was throwing an
error, which surfaced in the UI console. This error is now caught.
* Omit MetaMask `extensionId` from site metadata
The site metadata was updated in #7218 to include the extension id of
the extension connecting to MetaMask. This was done to allow external
extensions to connect with MetaMask, so that we could show the id on
the provider approval screen.
Unbeknownst to me at the time, the extension id was being set for all
connections to MetaMask from dapps. The id was set to MetaMask's id,
because the connections are made through MetaMask's contentscript.
This has been updated to only set the id when accepting a connection
from a different extension.
* Fix `siteMetadata` property names
In #7218 a few things were added to the site metadata, so the provider
approval controller was middleware was updated to accept the site
metadata as an object rather than accepting each property as a separate
parameter. Unfortunately we failed to notice that the site name and
icon were named differently in the site metadata than they were in the
provider approval controller, so the names of those properties were
unintentionally changed in the controller state.
The provider approval controller has been updated to restore the
original property names of `siteTitle` and `siteIcon`. An unused prop
that was added to the provider approval page in #7218 has also been
removed.
* ENS Reverse Resolution support
* Save punycode for ENS domains with Unicode characters
* Update SenderToRecipient recipientEns tooltip
* Use cached results when reverse-resolving ENS names
* Display ENS names in tx activity log
* Add estimated time to pending transactions
* add sytles for pending transactions component
* add media queries styling for pending transactions component
* fix lint errors, remove extra spaces
* refactor code to call `fetchBasicGasAndTimeEstimates` method once
* refactor code to call `getgetRenderableTimeEstimate` method once
* fix, correct export to use `transaction-time-remaining-component`
* fix indentation issues after running `yarn lint`
* newBigSigDig in gas-price-chart.utils supports strings
* Code cleanup
* Ensure fetchBasicGasAndTimeEstimates is only called from tx-list if there are pending-txs
* Move gas time estimate utilities into utility file
* Move getTxParams to transaction selector file
* Add feature flag for display of remaining transaction time in tx history list
* Fix circular dependency by removing unused import of transactionSelector in selectors.js
* Use correct feature flag property name transactionTime
* Ensure that tx list component correctly responds to turning tx time feature on
* Prevent precision errors in newBigSigDig
* Code clean up for pending transaction times
* Update transaction-time-remaining feature to count down seconds, countdown seconds and show '< 30'
* Code clean up for transaction-time-remaining feature
* tests - create tests for pending middlewares
* transactions - add r,s,v values to the txMeta to match the JSON rpc response
* network - add new middleware for eth_getTransactionByHash that the checks pending tx's for a response value
* transactions/pending - use getTransactionReceipt for checking if tx is in a block
* meta - file rename
If the extension ID is set, an alternate title and subtitle are used
for the Connect Request screen. The title is always `External
Extension`, and the subtitle is `Extension ID: [id]` instead of the
origin (which would just be `[extension-scheme]://[id]` anyway).
The hostname for the site is used as a fallback in case it has no
title.
The artificial hostname set for internal connections has been renamed
from 'MetaMask' to 'metamask' because URL objects automatically
normalize hostnames to be all lower-case, and it was more convenient to
use a URL object so that the parameter would be the same type as used
for an untrusted connection.
* Ensure correct transaction category when sending to contracts but there is no txParams data
* Update gas when pasting address in send
* Gracefully fall back is send.util/estimateGas when blockGasLimit from background is falsy
* Remove network request frontend fallback for blockGasLimit
* Add some needed slow downs to e2e tests
The 3Box SDK throws an HTTP 404 error when attempting to get the config
for an account that doesn't yet exist in 3Box. The regex we were using
to differentiate this error from others was broken. This ended up
preventing the user from logging in if they had 3Box enabled but hadn't
yet synced.
The regex has been corrected to catch this case, while allowing other
errors to propogate upward. Other 3Box errors will now be caught and
reported rather than interrupting login completely.
At some point in the future, we should expose these errors to the user
in some way, and allow them to retry in case 3Box was just temporarily
offline.
* Add UseNonce toggle
* Get the toggle actually working and dispatching
* Display nonce field on confirmation page
* Remove console.log
* Add placeholder
* Set customNonceValue
* Add nonce key/value to txParams
* remove customNonceValue from component state
* Use translation file and existing CSS class
* Use existing TextField component
* Remove console.log
* Fix lint nits
* Okay this sorta works?
* Move nonce toggle to advanced tab
* Set min to 0
* Wrap value in Number()
* Add customNonceMap
* Update custom nonce translation
* Update styles
* Reset CustomNonce
* Fix lint
* Get tests passing
* Add customNonceValue to defaults
* Fix test
* Fix comments
* Update tests
* Use camel case
* Ensure custom nonce can only be whole number
* Correct font size for custom nonce input
* UX improvements for custom nonce feature
* Fix advanced-tab-component tests for custom nonce changes
* Update title of nonce toggle in settings
* Remove unused locale message
* Cast custom nonce to string in confirm-transaction-base.component
* Handle string conversion and invalid values for custom nonces in handler
* Don't call getNonceLock in tx controller if there is a custom nonce
* Set nonce details for cases where nonce is customized
* Fix incorrectly use value for deciding whether to getnoncelock in approveTransaction
* Default nonceLock to empty object in approveTransaction
* Reapply use on nonceLock in cases where customNonceValue in approveTransaction.
* Show warning message if custom nonce is higher than MetaMask's next nonce
* Fix e2e test failure caused by custom nonce and 3box toggle conflict
* Update nonce warning message to include the suggested nonce
* Handle nextNonce comparison and update logic in lifecycle
* Default nonce field to suggested nonce
* Clear custom nonce on reject or confirm
* Fix bug where nonces are not shown in tx list on self sent transactions
* Ensure custom nonce is reset after tx is created in background
* Convert customNonceValue to number in approve tranasction controller
* Lint fix
* Call getNextNonce after updating custom nonce
* Delete unused code
* Run threebox imports through migrations
* Remove 3box feature flag
* Remove unnecessary use of 'type' in threebox._updatePlugin
* Fix threebox controller getLastUpdated
* Turn off threebox by default
* Rename restoredFromThreeBox to showRestorePrompt
* Remove accientally added method from threebox controller
* Restore from threebox on import from unlock screen
* Throw on non 404 errors from Box.getconfig in new3Box
* Adds ab test controller with a fullScreenVsPopup test
* Add migration for fullScreenVsPopup state
* Move abtest state under an 'abtests' object.
* MetaMask shows fullScreen group of a/b test unapproved txs in a full browser tab
* Ensure cancel metrics event in confirm-transaction-base.component.js is sent in all cases
* Switch to existing tab for unapproved tx if it exists when opening in full screen
* Send metrics event for entering a/b test from confirm screen
* Fix lint, unit and integration tests related to a/b test code
* Remove unnecessary tabs.query call in triggerUiInNewTab
* Adds threebox controller
* Adds threebox approval modal
* Fix unit tests and lint after addition of threebox
* Correct threebox behaviour after rejecting request for backup; fixes e2e tests.
* Update threebox controller for automatic syncing
* Ensure frontend locale updates when preferences are changed via direct update within controller
* Add toggle in settings for 3box syncing
* Update threebox controller for latest 3box version
* Delete unnecessary frontend changes for threebox integration
* Backing up address book contacts with threebox
* Update unit tests for 3box-integration additions
* Only enable threebox by default for new wallets
* Mock globals for correct unit tests
* 3box '1.10.2' -> '^1.10.2'
* Correct capilalization on 3Box
* Use log.debug instead of console.log in threebox controller
* Update yarn.lock
* Remove edge build
* Split 3box module into background deps js file
* extra bundle opts for bg-libs
* sync yarn.lock
* new3Box logic
* Show confirm threebox restore after import
* Remove bg-libs.js from manifest file for dev builds
* Switch 3Box controller to using the spaces api (instead of the profile api)
* Finalize switching to spaces api and only restoring from 3box after import
* Update metamask-controller-test.js for threebox controller changes
* Make threebox modal style consistent with others and update success button wording
* Use mock 3box when in test
* Correct 3box modal header
* Remove unnecessary property of threebox controller provider
* Remove unnecessary method calls after restoration from 3box in the threebox-restore-confirm modal.
* Replace setThreeBoxSyncingPermission calls in routes/index.js with turnThreeBoxSyncingOn
* Replace erroneous use of with
* Replace erroneous use of threeboxSyncing with threeBoxSyncingAllowed in advancted-tab directory
* Lint fixes for 3box changes
* Log errors encountered when updating 3Box
* Remove unnecessary parameter from state update
* Add timeout to initial 3Box sync
The initial 3Box sync will now timeout after 1 minute. If the timeout
is triggered, 3Box is disabled and cannot be re-enabled unless the
initial sync does finally finish. If it never finishes, 3Box cannot
be enabled unless the extension is reinstalled.
The Advanced Settings page was updated to show this option as disabled
in that circumstance, with a new discription explaining why it's
disabled. The UI here could certainly be improved.
Additionally, "on" and "off" labels were added to the toggle to match
the other toggles on the Advanced Settings page.
* Use non-minified 3Box module
We had previously used the minified 3Box module to avoid a build error
encountered when `envify` was processing the `libp2p` module (which is
used by 3Box). The build would fail because `esprima` (used by `envify`)
is incompatible with the object spread/rest operator (which is used in
`libp2p`).
That issue has been solved by adding a global Babelify transformation
specifically for transpiling out the object rest/spread operator from
dependencies. It has been targetted to only affect `libp2p` to avoid
extending the build time too much. This workaround can be used until
a new version of `esprima` is released that includes this bug fix.
* Use app key addresses for threebox
* Replace use of modal for confirming 3box restoration with a home notification
* Adds e2e tests for restoring from threebox
* Update eth-keyring-controller to 5.1.0
* Correct parameters passed to getAppKeyAddress in threebox.js
* Add prefix to origin passed to getAppKeyAddress in threebox.js
* Remove unused locale message.
* Prevent CORS errors in firefox e2e tests
* Ensure extraneous scripts are excluded from the local test dev build
* Move threeBoxLastUpdate state from home.component to redux
* Threebox PR code cleanup
* Always use first address when initializing threebox
* Replace setRestoredFromThreeBox api with setRestoredFromThreeBoxToFalse and setRestoredFromThreeBoxToTrue
* Update development/metamaskbot-build-announce.js to include ui-libs and bg-libs in hard coded bundle list
* Update test/e2e/threebox.spec.js to use new helpers added with pull #7144
* Make setFeatureFlag available on the ui window during testing
* Hide threebox feature behind a feature flag that can only be activated via dev console
* Remove unnecessary migration of threebox feature flag
* Prevent this.init() call in threebox constructor if feature flag is not turned on
* Prevent threebox notification from showing if feature flag is falsy
* http://localhost/8889 -> http://localhost/* in gulp manifest:testing tasks
The `_fetchAll` function is expected to return values, so catching
errors and logging them only results in an additional error at the
place where `_fetchAll` is called. It's better instead to let the
error get thrown as normal.
In this particular case `_fetchAll` is only called in once place. The
error is still correctly caught and logged (in the `_update` function)
* Create RTL stylesheets using `gulp-rtl`
* Handle RTL stylesheet special cases
Certain blocks of Sass were set to bypass "rtlcss" using ignore
comments. Certain icons had to be flipped 180 degrees.
* Switch stylesheets when locale changes
A second stylesheet has been added to each HTML page for use with
right-to-left locales. It is disabled by default. It is enabled on
startup if a RTL locale is set, and when switching to a RTL locale.
Similarly the LTR stylesheet is disabled when a RTL locale is used.
Unfortunately there is an unpleasant flash of unstyled content when
switching between a LTR and a RTL locale. There is also a slightly
longer page load time when using a RTL locale (<1s difference). We
couldn't think of an easy way to avoid these problems.
* Set `dir="auto"` as default on `TextFields`
* Fix styling of `.transaction-list`
* Filter `incomingTxListSelector` by network as well
* Start and stop block tracker polling in incoming tx controller
* Add fetch with abort in bg for `IncomingTxController`
* Nix notification for Share Address
* Add Connections settings tab in place of privacy mode toggle
* Split ProviderApprovalController into two stores
* Remove privacyMode feature flag altogether
* Add migration to remove privacyMode feature flag
* Replace use of backup-notification with use of home notification
* Pin notifications relative to window
* Remove unneeded isRequired condition on some home.component properties
* Refactor rendering of home notifications
* UX for multiple notifications
* Adds dismissal to provider request notification.
* Fix test failures
The e2e tests have been updated to reference `home-notification`
classnames instead of the removed `background-notification`. The
active tab proptypes and default values were updated as well.
* Implements ability to defer seed phrase backup to later
* Adds incremental-security.spec.js, including test dapp that sends signed tx with stand alone localhost provider
* Update metamask-responsive-ui for incremental account security changes
* Update backup-notification style and fix responsiveness of seed phrase screen
* Remove uneeded files from send-eth-with-private-key-test/
* Apply linguist flags in .gitattributes for send-eth-with-private-key-test/ethereumjs-tx.js
* Improve docs in controllers/onboarding.js
* Clean up metamask-extension/test/e2e/send-eth-with-private-key-test/index.html
* Remove unnecessary newlines in a couple first-time-flow/ files
* Fix import of backup-notification in home.component
* Fix git attrs file
`seedWords` used to be stored on the metamask state temporarily at
certain points. This hasn't been the case since #5994, but references
to this state remained. All of the logic remained for correctly updating
these `seedWords`, handling them during navigation, and scrubbing them
from the state.
However the state was never updated in practice. The `seedWords` are
still returned by `verifySeedPhrase`, and they're still stored in
component state in a few places. But they aren't ever set in the Redux
metadata state or the Preferences controller.
All references to this state have been removed, along with any logic
for interacting with this state. A few unused actions were removed as
well.
* Introduce delay for eth_estimateGas calls with in test
* Add test that fails when gas estimates of contract method calls without gas are too high.
* Get transaction gas data from unApprovedTxs instead of confirmTransaction
* Fix selection of gas data in gas-modal-page-container.container
* Lint changes related to Version-6.7.2-gasLimitFix
* Fix e2e tests on Version-6.7.2-gasLimitFix
* Fix unit and integration tests for changes from Version-6.7.2-gasLimitFix
* more e2e fixes
* Add assertions for transaction values on confirm screen
* Fix display of transaction amount on confirm screen.
* transactions/pending - check nonce against the network and mark as dropped if not included in a block
* transactions/pending - unifiy "dropped" txs
* transactions/pending - test - fix for new expected behavior
* fix comment
* transactions/pending - clean up dropped event
* fix spelling
Co-Authored-By: frankiebee <frankie.diamond@gmail.com>
* nit fix
* test/tx-pending - clarify test description
* Set a default value for code in _determineTransactionCategory
* Adds e2e tests that fail when token txs without gas param are not properly handled.
* Adds unit tests for _determineTransactionCategory
* Base error throwing and simple gas setting in estimateTxGas on transactionCategory
* Add networks tab to settings, with header.
* Adds network list to settings network tab.
* Adds form to settings networks tab and connects it to network list.
* Network tab: form adding and editing working
* Settings network form properly handles input errors
* Add translations for settings network form
* Clean up styles of settings network tab.
* Add popup-view styles and behaviour to settings network tab.
* Fix save button on settings network form
* Adds 'Add Network' button and addMode to settings networks tab
* Lint fix for settings networks tab addition
* Fix navigation in settings networks tab.
* Editing an rpcurl in networks tab does not create new network, just changes rpc of old
* Fix layout of settings tabs other than network
* Networks dropdown 'Custom Rpc' item links to networks tab in settings.
* Update settings sidebar networks subheader.
* Make networks tab buttons width consistent with input widths in extension view.
* Fix settings screen subheader height in popup view
* Fix height of add networks button in popup view
* Add optional label to chainId and symbol form labels in networks setting tab
* Style fixes for networks tab headers
* Add ability to customize block explorer used by custom rpc
* Stylistic improvements+fixes to custom rpc form.
* Hide cancel button.
* Highlight and show network form of provider by default.
* Standardize network subheader name to 'Networks'
* Update e2e tests for new settings network form
* Update unit tests for new rpcPrefs prop
* Extract blockexplorer url construction into method.
* Fix broken styles on non-network tabs in popup mode
* Fix block explorer url links for cases when provider in state has not been updated.
* Fix vertical spacing of network form
* Don't allow click of save button on network form if nothing has changed
* Ensure add network button is shown in popup view
* Lint fix for networks tab
* Fix block explorer url preference setting.
* Fix e2e tests for custom blockexplorer in account details modal changes.
* Update integration test states to include frequentRpcList property
* Fix some capitalizations in en/messages.json
* Remove some console.logs added during custom rpc form work
* Fix external account link text and url for modal and dropdown.
* Documentation, url validation, proptype required additions and lint fixes on network tab and form.
* eslint: Check for unused function arguments
* eslint: Ignore unused '_' in argument list
Also allow any number of '_' e.g., '__' or '___' which is to be used sparingly
* Remove and rename unused arguments
* Adds a transactionCategory to txMeta for use in UI
* Update transaction controller and tx-gas-util documentation on new code param in multiple functions.
* Ensure home screen does not render if there are unapproved txs (#6501)
* Ensure that the confirm screen renders before the home screen if there are unapproved txs.
* Only render confirm screen before home screen on mount.
* inpage - revert _metamask api to isEnabled isApproved isUnlocked
* Send metrics event from backend for on chain transaction failures
* Passes state object to backEndMetaMetricsEvent, and adds getMetaMetricState selector
* Add metametrics provider and util.
* Add backend api and state for participating in metametrics.
* Add frontend action for participating in metametrics.
* Add metametrics opt-in screen.
* Add metametrics events to first time flow.
* Add metametrics events for route changes
* Add metametrics events for send and confirm screens
* Add metametrics events to dropdowns, transactions, log in and out, settings, sig requests and main screen
* Ensures each log in is measured as a new visit by metametrics.
* Ensure metametrics is called with an empty string for dimensions params if specified
* Adds opt in metametrics modal after unlock for existing users
* Adds settings page toggle for opting in and out of MetaMetrics
* Switch metametrics dimensions to page level scope
* Lint, test and translation fixes for metametrics.
* Update design for metametrics opt-in screen
* Complete responsive styling of metametrics-opt-in modal
* Use new chart image on metrics opt in screens
* Incorporate the metametrics opt-in screen into the new onboarding flow
* Update e2e tests to accomodate metametrics changes
* Mock out metametrics network requests in integration tests
* Fix tx-list integration test to support metametrics provider.
* Send number of tokens and accounts data with every metametrics event.
* Update metametrics event descriptor schema and add new events.
* Fix import tos bug and send gas button bug due to metametrics changes.
* Various small fixes on the metametrics branch.
* Add origin custom variable type to metametrics.util
* Fix names of onboarding complete actions (metametrics).
* Fix names of Metrics Options actions (metametrics).
* Clean up code related to metametrics.
* Fix bad merge conflict resolution and improve promise handling in sendMetaMetrics event and confrim tx base
* Don't send a second metrics event if user has gone back during first time flow.
* Collect metametrics on going back from onboarding create/import.
* Add missing custom variable constants for metametrics
* Fix metametrics provider
* Make height of opt-in modal responsive.
* Adjust text content for opt-in modal.
* Update metametrics event names and clean up code in opt-in-modal
* Put phishing warning step next to last in onboarding flow
* Link terms of service on create and import screens of first time flow
* Add subtext to options on the onboarding select action screen.
* Fix styling of bullet points on end of onboarding screen.
* Combine phishing warning and congratulations screens.
* Fix placement of users if unlocking after an incomplete onboarding import flow.
* Fix capitalization in opt-in screen
* Fix last onboarding screen translations
* Add link to 'Learn More' on the last screen of onboarding
* Code clean up: metametrics branch
* Update e2e tests for phishing warning step removal
* e2e tests passing on metametrics branch
* Different tracking urls for metametrics on development and prod
* mm-controller - dont overwrite existing rpc settings
* ui-networkDropdown - dont pass old network as chainId
* add methods preferencesController.updateRpc and metamaskController.updateAndSetCustomRpc
* use updateAndSetCustomRpc in settings to allow rpcs to be updated
* use new rpc as nickname if no nick name has been supplied
* fix update rpc method
* Refactor and fix styling for first time flow. Remove seed phrase from persisted metamask state
* Fix linting and tests
* Fix translations, initialization notice routing
* Fix drizzle tests
* Fix e2e tests
* Fix integration tests
* Fix styling
* Fix migration naming from 030 to 031
* Open extension in browser when user has not completed onboarding
* Use selector for state.metamask.accounts in all cases.
* Default to cached balance when selecting metamask accounts
* Adds the cached-balances controller
* Documentation and small codes fixes for #5843
Co-Authored-By: danjm <danjm.com@gmail.com>
* Fixed Vivek's bug
Fixes#5850
What was happening:
It seems that his MetaMask had crashed while some new transactions had
been loading defaults. He probably had a network connectivity issue to
Infura (which we are working with Infura to address).
As a result of this network cutout, his three unapproved transactions
were not marked failed, and were not marked as `loadingDefaults =
false`, as their gas prices had not yet been estimated.
Normally this behavior is supposed to clean itself up when the
transaction controller starts up, via the
`TransactionController._onBootCleanUp()` function, but in this case,
during unlock, that function was unable to do its job because when it
requested the transaction list, the current network was in the `loading`
state, making it proceed as if there were no pending transactions.
To fix this, I am doing two things:
- Setting transactions to loadingDefaults = false in more catch blocks.
- Calling `onBootCleanUp()` when the network store's status changes, so
that it will re-trigger when loading completes.
* Fixed reference
* Fixed infinite loop bug
Was refreshing the tx list on every tx state change instead of just
network changes, creating an infinite loop.
* Add notes to tx updates to clarify logs
