This commit fulfills a long-standing desire to get the extension using
the same network controller as mobile by removing NetworkController from
this repo and replacing it with NetworkController from the
`@metamask/network-controller` package.
The new version of NetworkController is different the old one in a few
ways:
- The new controller inherits from BaseControllerV2, so the `state`
property is used to access the state instead of `store.getState()`.
All references of the latter have been replaced with the former.
- As the new controller no longer has a `store` property, it cannot be
subscribed to; the controller takes a messenger which can be
subscribed to instead. There were various places within
MetamaskController where the old way of subscribing has been replaced
with the new way. In addition, DetectTokensController has been updated
to take a messenger object so that it can listen for NetworkController
state changes.
- The state of the new controller is not updatable from the outside.
This affected BackupController, which dumps state from
NetworkController (among other controllers), but also loads the same
state into NetworkController on import. A method `loadBackup` has been
added to NetworkController to facilitate this use case, and
BackupController is now using this method instead of attempting to
call `update` on NetworkController.
- The new controller does not have a `getCurrentChainId` method;
instead, the chain ID can be read from the provider config in state.
This affected MmiController. (MmiController was also updated to read
custom networks from the new network controller instead of the
preferences controller).
- The default network that the new controller is set to is always
Mainnet (previously it could be either localhost or Goerli in test
mode, depending on environment variables). This has been addressed
by feeding the NetworkController initial state using the old logic, so
this should not apply.
The autolock field on the Settings screen — the field that allows users
to set the duration that MetaMask will wait for until automatically
locking — does not always accept decimal numbers. This breaks the e2e
test for this feature as it attempts to set this field to "0.1".
More specifically, the React component responsible for this field passes
whatever the user inputs through the `Number` function immediately and
then uses this to repopulate the input. Therefore, if the user enters
"3" followed by a ".", `Number("3.")` will be called. This evaluates to
the number 3, and "3" becomes the new value of the field. As a result,
the "." can never be typed.
Curiously, this behavior only happens in Firefox; Chrome seems to
keep the "." in the input field when it's typed. This happens because
`onChange` event doesn't seem to get fired until a number is typed
*after* the ".". This may be due to underlying differences in the DOM
between Chrome and Firefox.
Regardless, always passing the input through `Number` creates other odd
behavior, such as the fact that the input can never be cleared (because
`Number("")` evaluates to 0).
This commit solves these problems by saving the "raw" version of the
user's input as well as the normalized version. The raw version is
always used to populate the input, whereas the normalized version is
saved in state.
These tests were present in the core version of the NetworkController
tests, but not here. Add them makes it easier to visually compare
differences in the tests between core and this repo.
Update NetworkController tests to replace `NETWORK_TYPES.<NETWORK NAME>`
with `NetworkType.<network name>`. This makes it easier to visually
compare differences in the tests between core and this repo.
* feat(srp): add a quiz to the SRP reveal
* fixed the popover header centering
* lint fixes
* converted from `ui/components/ui/popover` to `ui/components/component-library/modal`
* responded to @darkwing review
* added unit tests
* renamed the folder to 'srp-quiz-modal'
* responded to Monte's review
* using i18n-helper in the test suite
* small improvement to JSXDict comments
* wrote a new webdriver.holdMouseDownOnElement() to assist with testing the "Hold to reveal SRP" button
* Updating layout and some storybook naming and migrating to tsx
* Apply suggestions from @georgewrmarshall
Co-authored-by: George Marshall <george.marshall@consensys.net>
* Unit test searches by data-testid instead of by text
* new layout and copy for the Settings->Security page
* now with 100% test coverage for /ui/pages/settings/security-tab
fixes#16871fixes#18140
* e2e tests to reveal SRP after quiz
* e2e- Fix lint, remove unneeded extras
* @coreyjanssen and @georgewrmarshall compromise
Co-authored-by: George Marshall <george.marshall@consensys.net>
Co-authored-by: Corey Janssen <corey.janssen@consensys.net>
* trying isRequired again
* transparent background on PNG
* [e2e] moving functions to helpers and adding testid for SRP reveal quiz (#19481)
* moving functions to helpers and adding testid
* fix lint error
* took out the IPFS gateway fixes
* lint fix
* translations of SRP Reveal Quiz
* new Spanish translation from Guto
* Update describe for e2e tests
* Apply suggestion from @georgewrmarshall
Co-authored-by: George Marshall <george.marshall@consensys.net>
* fixed the Tab key problem
---------
Co-authored-by: georgewrmarshall <george.marshall@consensys.net>
Co-authored-by: Plasma Corral <32695229+plasmacorral@users.noreply.github.com>
Co-authored-by: Corey Janssen <corey.janssen@consensys.net>
* feat: add new linea mainnet network
* fix: removed unused condition + lint code
* fix: update tests + fix network tab issue
* feat: add feature toggle for linea mainnet
* fix: add feature toggle for linea mainnet
* feat: add linea mainnet logo
* update @metamask/eth-json-rpc-infura package to support linea networks
* update linea mainnet block explorer url
* fix: refactor linea mainnet feature toggle
* fix: update linea mainnet chain id and rpc url
* fix: update settings-search unit test
* fix: update linea mainnet feature flag
* fix: remove useless async function keyword for linea mainnet feature flag
* Sync NC lookupNetwork tests with core
This makes it easier to visually compare differences in the
NetworkController unit tests between core and this repo.
* Add types for toBeFulfilled matcher
* Fix lint again
* fix: refactor linea goerli testnet implementation
* fix: rename linea goerli network
* feat: add linea testnet logo
* update linea goerli block explorer url
* update @metamask/eth-json-rpc-infura package to version 8.1.0
* fix: refactor ticker map object in shared/constants/networks.ts files
* Update message manager and signature controller
The packages `@metamask/message-manager` and
`@metamask/signature-controller` have been updated to the latest
versions. These versions were part of part of the [core monorepo v53](MetaMask/core#1385)
release. The remaining packages released as part of v53 will be updated
in later PRs.
These releases included a few breaking changes, but none that affect
the extension. Both packages now expect `getCurrentChainId` to return
`Hex`, but that was already the case here. Additionally the signature
controller now has a peer dependency on the approval controller v3,
which is already present and at the correct version.
Relates to #19271
* Ignore error caused by TS bug
* Update types to omit metadata for encryption requests
* Update lavamoat policy
* Update `@metamask/gas-fee-controller` to v6
The `@metamask/address-book-controller` package has been updated to v3.
This version was part of the [core monorepo v53](MetaMask/core#1385)
release. The remaining packages released as part of v53 will be updated
in later PRs.
This release included a number of breaking changes, but most of them
do not affect the extension:
* Bump to Node 16
* The extension already uses Node.js v16
* The `getChainId` constructor parameter now expects a `Hex` return
type rather than a decimal string
* The extension was already passing in a `getChainId` parameter that
returned `Hex`
* The gas fee controller messenger now requires the
`NetworkController:stateChange` event instead of the
`NetworkController:providerConfigChange` event
* This does not apply if `onNetworkStateChange` and `getChainId` are
provided to the constructor, which is the case here.
* Update `@metamask/network-controller` dependency and peer dependency
* This dependency is only used for types, and none of the type
changes affect how the extension interacts with this controller.
The one change that did have an impact is that the constructor
parameter `onNetworkStateChange` now expects event handlers to be
passed the full network state.
Relates to #19271
* Ensure chainid always matches mainnet in test builds
This is a bit strange, but this is how the tests were setup previously.
* Fix accidental state mutation
* Remove hardcoded mainnet chain ID from test builds
* Update Snaps privacy notice
* Add changes to finalize update requirements
* Update scroll icon color
* Fix unit tests
* Update link
* Address small change requests
* Fix unit test
* move terms of use link to variable
---------
Co-authored-by: Guillaume Roux <guillaumeroux123@gmail.com>
The core version of NetworkControler features a controller action,
`NetworkController:getEthQuery`, which, as its name implies, can be used
to get the EthQuery instance that has been created specially to talk to
the currently selected network. As a result there is a corresponding
unit test for this action.
To make the test suites between this version of NetworkController and
core easier to compare, this commit adds the action along with its test.
* Make eth_accounts return all permitted accounts rather than just the most recently selected one
* fixup! Make eth_accounts return all permitted accounts rather than just the most recently selected one
* Trigger
---------
Co-authored-by: legobeat <109787230+legobeat@users.noreply.github.com>
Co-authored-by: Jiexi Luan <jiexiluan@gmail.com>
* Update snap installation permission warning UI
* Fix font size (TextVariant)
* Fix vertical margins between labels
* Update font weight in warning top description
* Update snapName for warning modal on update flow
* Add new snap header and footer to snap install
* Add new snap header and footer to snap result and snap update
* Fix loading state
* Fix lint
* Add required scrolling
* Adjust avatar component
* Apply new headers and footers to snaps confirmations
* Rename previous SnapAuthorship component to SnapAuthorshipExpanded
* Fix lint
* Fix font weight
* Fix fencing
* Fix a test
* Fix lint after rebase
* Fix E2E
* Fix locale lint
* Fix another E2E
* Fix test ID
* Address PR comments
* Better scroll button centering
* Address design comments
* Fix unit test
* Fix E2Es
In the core version of NetworkController, when the `setActiveNetwork`
method updates the provider configuration object, it will capture the ID
of the network configuration used to do so within the provider config
itself. In the same way, `setProviderType` clears any ID that was
previously set from the provider config.
This commit updates this version of NetworkController to be consistent
and updates tests to match.
* Update UI (for audit)
Revert yarn.lock change
Update e2e tests with new copy for a button
Make UI changes to custom Snap UI
Update UI on snap installation success page
Fix icon on installation success
Fix snap name font weight in installation page
Add UI changes for Snap installation failed page
Add new copy for snap installation screen
Update e2e tests OK button name
Update OK button names in e2e tests
Return previous functionality of update flow
Add error message handling for update screens
* Fix after rebase
* Fix messages.json update message
* Revert SCSS changes
* Refactor failed and success screen rendering
* snaps@0.34.0-flask.1
* Update LavaMoat policies
* Replace instances of targetKey with targetName
* Replace use of PermissionKeys with PermissionNames
* Use Flask packages in tests for now
* Bump execution env
* Add another mock
* Fix lint
In the core version of NetworkController, the `networkDetails` property
is initialized to `{ EIPS: {} }`. It is also reset to this
representation when `refreshNetwork` is called.
In this version of NetworkController, however, the default
representation of `networkDetails` is `{ EIPS: { 1559: undefined } }`.
From a consumer's perspective this doesn't make a difference — it's
practically the same. It does make a slight difference in tests,
however.
With that in mind, this commit changes the default representation to `{
EIPS: {} }`. This makes it easier to visually compare differences in the
NetworkController unit tests between core and this repo.