* Version v10.18.4
* Fix default currency symbol for `wallet_addEthereumChain` + improve warnings for data that doesn't match our validation expectations (#15201)
* set more appropriate default for ticker symbol when wallet_addEthereumChain is called
* throw error to dapp when site suggests network with same chainId but different ticker symbol from already added network, instead of showing error and disabled notification to user
* Fix Provider Tracking Metrics (#15082)
* fix filetype audit (#15334)
* Remove decentralized 4byte function signature registry since it contains incorrect signatures and we can't algorithmically check for best option when 4byte.directory is down (#15300)
* remove decentralized 4byte function signature registry since it is griefed and we can't algorithmically check for best option when 4byte is down
* add migration
* remove nock of on chain registry call in getMethodDataAsync test
* remove audit exclusion (#15346)
* Updates `eth-lattice-keyring` to v0.10.0 (#15261)
This is mainly associated with an update in GridPlus SDK and enables
better strategies for fetching calldata decoder data.
`eth-lattice-keyring` changes:
GridPlus/eth-lattice-keyring@v0.7.3...v0.10.0
`gridplus-sdk` changes (which includes a codebase rewrite):
GridPlus/gridplus-sdk@v1.2.3...v2.2.2
* Fix 'block link explorer on custom networks' (#13870)
* Created a logic for the 'Add a block explorer URL'
Removed unused message
Message logic rollback
Modified history push operation
WIP: Pushing before rebasing
Applied requested changes
Removed unintenionally added code
* Lint fix
* Metrics fixed
* Stop injecting provider on docs.google.com (#15459)
* Fix setting of gasPrice when on non-eip 1559 networks (#15628)
* Fix setting of gasPrice when on non-eip 1559 networks
* Fix unit tests
* Fix logic
* Update ui/ducks/send/send.test.js
Co-authored-by: Mark Stacey <markjstacey@gmail.com>
Co-authored-by: Mark Stacey <markjstacey@gmail.com>
* [GridPlus] Bumps `eth-lattice-keyring` to v0.11.0 (#15490)
* [GridPlus] Bumps `gridplus-sdk` to v2.2.4 (#15561)
* remove exclusions for mismatched object jsdoc type casing (#15351)
* Improve `tokenId` parsing and clean up `useAssetDetails` hook (#15304)
* Fix state creation in setupSentryGetStateGlobal (#15635)
* filter breadcrumbs for improved clarity while debugging sentry errors (#15639)
* Update v10.18.4 changelog (#15645)
* Auto generated changelog
* Update 10.18.4 changelog
* Run lavamoat:auto
* Call metrics event for wallet type selection at the right time (#15591)
* Fix Sentry in LavaMoat contexts (#15672)
Our Sentry setup relies upon application state, but it wasn't able to
access it in LavaMoat builds because it's running in a separate
Compartment.
A patch has been introduced to the LavaMoat runtime to allow the root
Compartment to mutate the `rootGlobals` object, which is accessible
from outside the compartment as well. This lets us expose application
state to our Sentry integration.
* Fix Sentry deduplication of events that were never sent (#15677)
The Sentry `Dedupe` integration has been filtering out our events, even
when they were never sent due to our `beforeSend` handler. It was
wrongly identifying them as duplicates because it has no knowledge of
`beforeSend` or whether they were actually sent or not.
To resolve this, the filtering we were doing in `beforeSend` has been
moved to a Sentry integration. This integration is installed ahead of
the `Dedupe` integration, so `Dedupe` should never find out about any
events that we filter out, and thus will never consider them as sent
when they were not.
* Replace `lavamoat-runtime.js` patch (#15682)
A patch made in #15672 was found to be unnecessary. Instead of setting
a `rootGlobals` object upon construction of the root compartment, we
are now creating a `sentryHooks` object in the initial top-level
compartment. I hadn't realized at the time that the root compartment
would inherit all properties of the initial compartment `globalThis`.
This accomplishes the same goals as #15672 except without needing a
patch.
* Update v10.18.4 changelog
* Fix lint issues
* Update yarn.lock
* Update `depcheck` to latest version (#15690)
`depcheck` has been updated to the latest version. This version pins
`@babel/parser` to v7.16.4 because of unresolved bugs in v7.16.5 that
result in `depcheck` failing to parse TypeScript files correctly.
We had a Yarn resolution in place to ensure `@babel/parser@7.16.4` was
being used already. That resolution is no longer needed so it has been
removed. This should resove the issue the dev team has been seeing
lately where `yarn` and `yarn-deduplicate` disagree about the state the
lockfile should be in.
* Update yarn.lock
* Update LavaMoat policy
* deduplicate
* Update LavaMoat build policy
Co-authored-by: MetaMask Bot <metamaskbot@users.noreply.github.com>
Co-authored-by: Alex Donesky <adonesky@gmail.com>
Co-authored-by: Brad Decker <bhdecker84@gmail.com>
Co-authored-by: Alex Miller <asmiller1989@gmail.com>
Co-authored-by: Filip Sekulic <filip.sekulic@consensys.net>
Co-authored-by: Erik Marks <25517051+rekmarks@users.noreply.github.com>
Co-authored-by: Dan J Miller <danjm.com@gmail.com>
Co-authored-by: Mark Stacey <markjstacey@gmail.com>
Co-authored-by: seaona <54408225+seaona@users.noreply.github.com>
Co-authored-by: seaona <mariona@gmx.es>
Co-authored-by: PeterYinusa <peter.yinusa@consensys.net>
ESLint rules have been added to enforce our JSDoc conventions. These
rules were introduced by updating `@metamask/eslint-config` to v9.
Some of the rules have been disabled because the effort to fix all lint
errors was too high. It might be easiest to enable these rules one
directory at a time, or one rule at a time.
Most of the changes in this PR were a result of running
`yarn lint:fix`. There were a handful of manual changes that seemed
obvious and simple to make. Anything beyond that and the rule was left
disabled.
If a `gasPrice` was specified in a transaction sent via a dapp, we
would include it in our `eth_estimateGas` call, causing it to fail if
the user had insufficient balance (for either the transaction amount or
the gas fee). This resulted in the fallback gas estimate being used;
the block gas limit. The block gas limit is quite a bit larger than
most transactions need, so this resulted in wildly inflated gas costs
being shown on our confirmation screen.
The `gasPrice` has been removed from the `txParams` object we pass to
`eth_estimateGas`, so now it won't perform any balance checks anymore.
This ensures that we'll get a valid gas estimate, as long as geth is
able to simulate the contract execution properly.
Fixes#9967
A few inconsistencies in JSDoc formatting have been fixed throughout
the project. Many issues remain; these were just the few things that
were easy to fix with a regular expression.
The changes include:
* Using lower-case for primitive types, but capitalizing non-primitive
types
* Separating the parameter identifier and the description with a dash
* Omitting a dash between the return type and the return description
* Ensuring the parameter type is first and the identifier is second (in
a few places it was backwards)
* Using square brackets to denote when a parameter is optional, rather
than putting "(optional)" in the parameter description
* Including a type and identifier with every parameter
* Fixing inconsistent spacing, except where it's used for alignment
* Remove incorrectly formatted `@deprecated` tags that reference non-
existent properties
* Remove lone comment block without accompanying function
Additionally, one parameter was renamed for clarity.
A race condition exists where after adding an unapproved transaction,
it could be mutated and then replaced when the default gas parameters
are set. This happens because the transaction is added to state and
broadcast before the default gas parameters are set, because
calculating the default gas parameters to use takes some time.
Once they've been calculated, the false assumption was made that the
transaction hadn't changed.
The method responsible for setting the default gas now retrieves an
up-to-date copy of `txMeta`, and conditionally sets the defaults only
if they haven't yet been set.
This race condition was introduced in #2962, though that PR also added
a loading screen that avoided this issue by preventing the user from
interacting with the transaction until after the gas had been
estimated. Unfortunately this loading screen was not carried forward to
the new UI.
* Remove `estimatedGas` property from `txMeta`
The `estimatedGas` property was a cache of the gas value estimated for
a transaction when the default gas limit was set. This property wasn't
used anywhere. It may have been useful for debugging purposes, but the
same gas estimate is already stored on the `history` property so it
should be present in state logs regardless.
* Remove `gasLimitSpecified` txMeta property
The `gasLimitSpecified` property of `txMeta` wasn't used for anything.
It might have been useful for debugging purposes, but whether or not
the gas limit was specified can also be determined from looking at the
transaction history, so it's not a huge loss.
* Remove `gasPriceSpecified` txMeta property
The `gasPriceSpecified` property of `txMeta` wasn't used for anything.
It might have been useful for debugging purposes, but whether or not
the gas price was specified can also be determined from looking at the
transaction history, so it's not a huge loss.
* Remove `simpleSend` txMeta property
The `simpleSend` property of `txMeta` was used to ensure a buffer was
not added to the gas limit during gas estimation for simple send
transactions. It was made redundant by #8484, which accomplishes this
without the use of this property.
`analyzeGasUsage` now returns the results of the analysis rather than
setting them directly on `txMeta`. The caller is now responsible for
mutating `txMeta` instead. Functionally this should be identical to
before.
The simple send gas estimation has been moved out of the gas estimation
module, and into the transaction controller. This was done in an effort
to limit the number of places where `txMeta` is mutated while the
default gas parameters are being set.
* Specify type before parameter name
Various JSDoc `@param` entries were specified as `name {type}` rather
than `{type} name`.
A couple of `@return` entries have been given types as well.
* Use JSDoc optional syntax rather than Closure syntax
* Use @returns rather than @return
* Use consistent built-in type capitalization
Primitive types are lower-case, and Object is upper-case.
* Separate param/return description with a dash
* Set a default value for code in _determineTransactionCategory
* Adds e2e tests that fail when token txs without gas param are not properly handled.
* Adds unit tests for _determineTransactionCategory
* Base error throwing and simple gas setting in estimateTxGas on transactionCategory
* Adds a transactionCategory to txMeta for use in UI
* Update transaction controller and tx-gas-util documentation on new code param in multiple functions.
