The `network` store of the network controller crams two types of data
into one place. It roughly tracks whether we have enough information to
make requests to the network and whether the network is capable of
receiving requests, but it also stores the ID of the network (as
obtained via `net_version`).
Generally we shouldn't be using the network ID for anything, as it has
been completely replaced by chain ID, which all custom RPC endpoints
have been required to support for over a year now. However, as the
network ID is used in various places within the extension codebase,
removing it entirely would be a non-trivial effort. So, minimally, this
commit splits `network` into two stores: `networkId` and
`networkStatus`. But it also expands the concept of network status.
Previously, the network was in one of two states: "loading" and
"not-loading". But now it can be in one of four states:
- `available`: The network is able to receive and respond to requests.
- `unavailable`: The network is not able to receive and respond to
requests for unknown reasons.
- `blocked`: The network is actively blocking requests based on the
user's geolocation. (This is specific to Infura.)
- `unknown`: We don't know whether the network can receive and respond
to requests, either because we haven't checked or we tried to check
and were unsuccessful.
This commit also changes how the network status is determined —
specifically, how many requests are used to determine that status, when
they occur, and whether they are awaited. Previously, the network
controller would make 2 to 3 requests during the course of running
`lookupNetwork`.
* First, if it was an Infura network, it would make a request for
`eth_blockNumber` to determine whether Infura was blocking requests or
not, then emit an appropriate event. This operation was not awaited.
* Then, regardless of the network, it would fetch the network ID via
`net_version`. This operation was awaited.
* Finally, regardless of the network, it would fetch the latest block
via `eth_getBlockByNumber`, then use the result to determine whether
the network supported EIP-1559. This operation was awaited.
Now:
* One fewer request is made, specifically `eth_blockNumber`, as we don't
need to make an extra request to determine whether Infura is blocking
requests; we can reuse `eth_getBlockByNumber`;
* All requests are awaited, which makes `lookupNetwork` run fully
in-band instead of partially out-of-band; and
* Both requests for `net_version` and `eth_getBlockByNumber` are
performed in parallel to make `lookupNetwork` run slightly faster.
The `HardwareKeyringTypes` constant has been renamed to `KeyringTypes`
and moved to a separate constants module, to reflect that it contains
more than just hardware wallet keyring types. This corrects a mistake
made recently during a TypeScript conversion.
* feat: add desktop enable button component
This component will be added
to the experimental page. Users
will then be able to initialize
a desktop connection
* feat: add desktop pairing page
* feat: add desktop deep-linking shared lib
* test: add initial entries to render helper
Allow specifying initialEntries for
MemoryRouter. This change will allow
testing pages that use the useParam
hook.
* feat: add desktop error page
Error page for any desktop pairing
related issue
* feat: add desktop routes to route component
* feat: add enable desktop button to experimental tab
* feat: add desktop icon when paired in dev mode
* feat: disable ledger live control when desktop enabled
* feat: register desktop error actions on ui init
* fix: add missing code fencing
* chore: remove enable desktop rpc middleware
Now that we are adding the UI
there's no need for this rpc middleware
(as it was used to test desktop background
code)
* fix: display experimental tab for desktop
* Use network provider state, instead of CurrencyRateController state, select 'nativeCurrency'
* Fix unit tests
* Lint fix
* Only use the network provider ticket for the native currency when useCurrencyRateCheck is false
* Fix unit test
* Fix tests for real
The controllers package has been updated to v33. The only breaking
change in this release was to rename the term "collectible" to "NFT"
wherever it appeared in the API.
Changes in this PR have been kept minimal; additional renaming can be
done in separate PRs. This PR only updates the controller names,
controller state, controller methods, and any direct references to
these things. NFTs are still called "collectibles" in most places.
* Deprecating Rinkeby, setting default debug network to Goerli
* Deprecating Ropsten and Kovan
* Conflict fix
* Remove unused localization, test fixes
* Add migration for moving used deprecated testnets to custom networks
* Fix migrator test
* Add more unit tests
* Migration updates provider type to rpc if deprecated network is selected
* Migration fully and correctly updates the provider if selected network is a deprecated testnet
* Continue to show deprecation warning on each of rinkeby, ropsten and kovan
* Add rpcUrl deprecation message to loading screen
* Removing mayBeFauceting prop
Co-authored-by: Dan Miller <danjm.com@gmail.com>
* Draft methods to brak updateTransaction into smaller more targeted
methods.
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
* This is a combination of 76 commits.
normalize and validate tx params.
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
Method to normalize tx and check if it's unapproved.
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
Move the methods to controllers/transactions/index.js
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
Flesh out the methods to update transaction with custom notes.
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
enforce that only the properties for the specific methid can be updated via the method.
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
Test update gas fees
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
Update swap approval transaction
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
use lodash to remove undefined properties
update swap transaction tests
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
Updates transaction user settings.
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
Lint fixes.
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
Add more parameters to updateSwapTransaction
approvalTxId
estimatedBaseFee
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
Add Update Transaction Metrics
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
Update transaction gas fees actions.js
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
Lint fixes.
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
Update EIP 1559 Params.
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
Lint Fixes.
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
Documentations.
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
Remove metrics from this PR
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
Lint fixes: Removed unused variables
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
Add more params to updateTransactionGasFees.
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
Update eip1559 method to editableParams.
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
lint fixes.
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
Fix Mocha tests
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
add gasPrice to updateEditableParams
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
Remove duplicated Params in notes.
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
A few more tests to cover if
transaction status is not unapproved
transaction is passed more parameters than it requires.
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
Update Transaction Gas Fees.
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
Update gas fees in edit-gas-popover.
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
Remove metrics.
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
Update gas settings and user settings.
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
Lint fixes.
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
Fix unit tests.
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
Lint fixes.
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
Draft methods to brak updateTransaction into smaller more targeted
methods.
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
normalize and validate tx params.
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
Method to normalize tx and check if it's unapproved.
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
Move the methods to controllers/transactions/index.js
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
Flesh out the methods to update transaction with custom notes.
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
Test update gas fees
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
Update swap approval transaction
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
use lodash to remove undefined properties
update swap transaction tests
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
Updates transaction user settings.
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
Lint fixes.
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
Add Update Transaction Metrics
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
Update transaction gas fees actions.js
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
Lint fixes.
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
Update EIP 1559 Params.
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
Lint Fixes.
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
Documentations.
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
Remove metrics from this PR
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
Lint fixes: Removed unused variables
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
Add more params to updateTransactionGasFees.
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
Update eip1559 method to editableParams.
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
lint fixes.
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
Fix Mocha tests
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
add gasPrice to updateEditableParams
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
Remove duplicated Params in notes.
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
A few more tests to cover if
transaction status is not unapproved
transaction is passed more parameters than it requires.
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
Update Transaction Gas Fees.
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
Remove metrics.
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
Update gas settings and user settings.
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
Lint fixes.
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
Fix unit tests.
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
Lint fixes.
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
Remove dup;icated method from rebase.
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
unrelated change
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
Force re-run workflow
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
Lint fix
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
Do not hideLoading since we're not showing it.
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
UpdateTransaction should be renamed to updateGasFees
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
updateGasFees in gas-modal-page-container.
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
fix:
update previous gas params update method
add types to the jsdoc comments.
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
updateTransactionGasFees should have been updatePreviousGasParams
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
Previous gas fees can be updated for confirmed transactions.
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
add updatePreviousGasParams to mocked functions.
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
Lint fixes
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
* we need to await the first dispatch before we call the second
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
* update values to make tests pass
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
* More changes to make e2e pass
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
* Need to wait a bit after save for changes to take effect.
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
* Remove merge comments.
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
* Await one dispatch before calling another
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
* We don't need goHome anymore.
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
* Tests must use async...await syntax too since we have await in the
useTranasctionFunction
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
* Add delay after button click for values to update
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
* Wait a moment after clicking save for values to update
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
* Wait after clicking save...
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
* Merge update transaction gas fees and transaction user settings
Show loading indicator on edit gas popover
Fix tests.
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
* Lint fixes
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
* Fix JSDoc
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
* updatePreviousGasParams should also return updated transaction meta.
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
When a lot of transactions are occurring on the network, such as during
an NFT drop, it drives gas fees up. When this happens, we want to not
only inform the user about this, but also dissuade them from using a
higher gas fee (as we have proved in testing that high gas fees can
cause bidding wars and exacerbate the situation).
The method for determining whether the network is "busy" is already
handled by GasFeeController, which exposes a `networkCongestion`
property within the gas fee estimate data. If this number exceeds 0.66 —
meaning that the current base fee is above the 66th percentile among the
base fees over the last several days — then we determine that the
network is "busy".
ESLint rules have been added to enforce our JSDoc conventions. These
rules were introduced by updating `@metamask/eslint-config` to v9.
Some of the rules have been disabled because the effort to fix all lint
errors was too high. It might be easiest to enable these rules one
directory at a time, or one rule at a time.
Most of the changes in this PR were a result of running
`yarn lint:fix`. There were a handful of manual changes that seemed
obvious and simple to make. Anything beyond that and the rule was left
disabled.
* Show test networks toggle button in settings/advanced tab.
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
* Apply toggle testnet settings and show/hide testnets when on/off
Add localhost to testnet.
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
* Lint fixes.
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
* Show add network button
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
* Open full screen when add network is called.
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
* Show custonm rpc before testnet rpcs
lint fixes.
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
* Test cases for network dropdown.
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
* Test cases for toggle test networks in advanced tab component.
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
* Lint fixes.
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
* Fix Locales.
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
* E2E Tests: Custom RPC is now called Add Network
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
* Lint fix
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
* E2E: When Add Network button is clicked, wait for the full screen window to
be visible
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
* findVisibleElement should use a class. i.e start with a dot
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
* Hide Dropdown when Add Netwok is clicked.
Only show full screen if it's not already showing.
E2E tests passing.
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
* Lint fixes
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
* Fix tests for jest
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
* Testnets are not being shown by default anymore, tests should use
Mainnet instead.
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
* Import Button from ui
Change selector name to getShowTestnetworks
Fix button to show full width
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
* Fix e2e tests
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
* Remove localhost from INFURA provider types.
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
* Fix errors in Advanced Tab Component tests
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
* Lint fixes
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
* Fix unit tests for advanced tab component.
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
* Remove deleted elements from e2e tests
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
* Make sure all tests passed.
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
* Lint fixes
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
* Connect ledger via webhid if that option is available
* Explicitly setting preference for webhid
* Use ledgerTransportType enum instead of booleans for ledger live and webhid preferences
* Use single setLEdgerTransport preference methods and property
* Temp
* Lint fix
* Unit test fix
* Remove async keyword from setLedgerTransportPreference function definition in preferences controller
* Fix ledgelive setting toggle logic
* Migrate useLedgerLive preference property to ledgerTransportType
* Use shared constants for ledger transport type enums
* Use constant for ledger usb vendor id
* Use correct property to check if ledgerLive preference is set when deciding whether to ask for webhid connection
* Update eth-ledger-bridge-keyring to v0.9.0
* Only show ledger live transaction helper messages if using ledger live
* Only show ledger live part of tutorial if ledger live setting is on
* Fix ledger related prop type errors
* Explicitly use u2f enum instead of empty string as a transport type; default transport type to webhid if available; use constants for u2f and webhid
* Cleanup
* Wrap ledger webhid device request in try/catch
* Clean up
* Lint fix
* Ensure user can easily connect their ledger wallet when they need to.
* Fix locales
* Fix/improve locales changes
* Remove unused isFirefox property from confirm-transaction-base.container.js
* Disable transaction and message signing confirmation if ledger webhid requires connection
* Ensure translation keys for ledger connection options in settings dropdown can be properly detected by verify-locales
* Drop .component from ledger-instruction-field file name
* Move renderLedgerLiveStep to module scope
* Remove ledgerLive from function and message names in ledger-instruction-field
* Wrap ledger connection logic in ledger-instruction-field in try catch
* Clean up signature-request.component.js
* Check whether the signing address, and not the selected address, is a ledger account in singature-request.container
* Ensure ledger instructions and webhid connection button are shown on signature-request-original signatures
* Improve webhid selection handling in select-ledger-transport-type onChange handler
* Move metamask redux focused ledger selectors to metamask duck
* Lint fix
* Use async await in checkWebHidStatusRef.current
* Remove unnecessary use of ref in ledger-instruction-field.js
* Lint fix
* Remove unnecessary try/catch in ledger-instruction-field.js
* Check if from address, not selected address, is from a ledger account in confirm-approve
* Move findKeyringForAddress to metamask duck
* Fix typo in function name
* Ensure isEqualCaseInsensitive handles possible differences in address casing
* Fix Learn More link size in advanced settings tab
* Update app/scripts/migrations/066.js
Co-authored-by: Mark Stacey <markjstacey@gmail.com>
* Update ui/pages/settings/advanced-tab/advanced-tab.component.test.js
Co-authored-by: Mark Stacey <markjstacey@gmail.com>
* Add jsdoc comments for new selectors
* Use jest.spyOn for mocking navigator in ledger webhid migration tests
* Use LEDGER_TRANSPORT_TYPES values to set proptype of ledgerTransportType
* Use LEDGER_TRANSPORT_TYPES values to set proptype of ledgerTransportType
* Fix font size of link in ledger connection description in advanced settings
* Fix return type in setLedgerTransportPreference comment
* Clean up connectHardware code for webhid connection in actions.js
* Update app/scripts/migrations/066.test.js
Co-authored-by: Mark Stacey <markjstacey@gmail.com>
* Update ui/ducks/metamask/metamask.js
Co-authored-by: Mark Stacey <markjstacey@gmail.com>
* Add migration test for when useLedgerLive is true in a browser that supports webhid
* Lint fix
* Fix inline-link size
Co-authored-by: Mark Stacey <markjstacey@gmail.com>
The `SET_CURRENT_FIAT` action has been removed. It has been replaced
by a call to `forceUpdateMetamaskState`. The only purpose of this
action was to eagerly update the current fiat currency settings before
the next state update. Forcing a state update instead is simpler and
safer.
The `setCurrentCurrency` function in the background has been updated to
no longer return the state, now that it's no longer needed.
