* UX: Multichain: Move Add Account and Import Account into Account Menu Popover
* Create a new CreateAccount component for the Account Menu
* Add actions for import form
* Use separate actions for cancel vs. submit
* Fix jest tests
* Remove commented route navigation
* Accommodate for failing import
* Fix tests
* Remove routes for new account and import
* Remove old create account page
* Move import-account files to multichain directory
* Fix paths on the import files
* Remove deprecated component library variables
* Fix error property of add form
* Fix user-actions-benchmark
* Update `@metamask/gas-fee-controller` to v6
The `@metamask/address-book-controller` package has been updated to v3.
This version was part of the [core monorepo v53](MetaMask/core#1385)
release. The remaining packages released as part of v53 will be updated
in later PRs.
This release included a number of breaking changes, but most of them
do not affect the extension:
* Bump to Node 16
* The extension already uses Node.js v16
* The `getChainId` constructor parameter now expects a `Hex` return
type rather than a decimal string
* The extension was already passing in a `getChainId` parameter that
returned `Hex`
* The gas fee controller messenger now requires the
`NetworkController:stateChange` event instead of the
`NetworkController:providerConfigChange` event
* This does not apply if `onNetworkStateChange` and `getChainId` are
provided to the constructor, which is the case here.
* Update `@metamask/network-controller` dependency and peer dependency
* This dependency is only used for types, and none of the type
changes affect how the extension interacts with this controller.
The one change that did have an impact is that the constructor
parameter `onNetworkStateChange` now expects event handlers to be
passed the full network state.
Relates to #19271
* Ensure chainid always matches mainnet in test builds
This is a bit strange, but this is how the tests were setup previously.
* Fix accidental state mutation
* Remove hardcoded mainnet chain ID from test builds
Three e2e tests have been updated to fix a possible race condition
causing intermittent e2e test failures.
In each of the updated tests, the test checks the current network.
The check is performed as a two-step process: locate the current
network element, then check the text to ensure it's correct.
This fails when the test driver finds the element before it re-renders.
If the test runs too quickly, it compares the text before the switch
is shown on screen, and the test fails.
Instead the tests use the element locator to describe what they want.
This tells the test driver to keep looking until the conditions are
met, ensuring the test doesn't fail unless the network switch takes
longer than the default timeout (which should not happen).
This is a good example of why we should avoid using assertions on
elements in e2e tests. Express your assertions as locators instead to
make the test more resilient in the case where the test runs before the
next render.
* feature(17901): fix address-book `Sends to an address book entry` e2e against MV3 build
* feature(17901): add balance guide for send-eth e2e as well
---------
Co-authored-by: legobeat <109787230+legobeat@users.noreply.github.com>
* Rename `provider` to `providerConfig`
The network controller `provider` state has been renamed to
`providerConfig`. This better reflects what this state is, and makes
this controller more closely aligned with the core network controller.
All references to the provider configuration have been updated to
prefer `providerConfig` over `provider`, to make the distinction clear
between a provider and provider config.
Closes#18902
* Add migration
* Test dapp update to v6.0.0 and tweak initial token amounts to adjust to the new contract
* Update gas estimates for new TST contract
---------
Co-authored-by: legobeat <109787230+legobeat@users.noreply.github.com>
* WIP commit
* Moving copy out of messages.json, styling changes
* handling scroll button click and disable logic
* moving scrollButton up to popover component, adding logic for accepting terms of use in popover and onboarding flows
* adding terms of use to e2e wallet creation/import
* adjusting failing unit test
* fixing QR code e2e
* updating welcome test
* setting app state in fixtures
* Update app/scripts/controllers/app-state.js
removing console log
Co-authored-by: Nidhi Kumari <nidhi.kumari@consensys.net>
* Update ui/components/app/terms-of-use-popup/terms-of-use-popup.stories.js
adding args to ToU popup storybook
Co-authored-by: Nidhi Kumari <nidhi.kumari@consensys.net>
* Update ui/components/app/terms-of-use-popup/terms-of-use-popup.js
Co-authored-by: Nidhi Kumari <nidhi.kumari@consensys.net>
* updating DS components in terms of use
* popover styling changes
* adding metametrics tracking
* editing scrollbutton behavior
* adding unit test
* code fencing
---------
Co-authored-by: Nidhi Kumari <nidhi.kumari@consensys.net>
* fix(18194): Redirect to extension expanded view when click back to safety button
* Bump phishing warning version
---------
Co-authored-by: Dan J Miller <danjm.com@gmail.com>
The `network` store of the network controller crams two types of data
into one place. It roughly tracks whether we have enough information to
make requests to the network and whether the network is capable of
receiving requests, but it also stores the ID of the network (as
obtained via `net_version`).
Generally we shouldn't be using the network ID for anything, as it has
been completely replaced by chain ID, which all custom RPC endpoints
have been required to support for over a year now. However, as the
network ID is used in various places within the extension codebase,
removing it entirely would be a non-trivial effort. So, minimally, this
commit splits `network` into two stores: `networkId` and
`networkStatus`. But it also expands the concept of network status.
Previously, the network was in one of two states: "loading" and
"not-loading". But now it can be in one of four states:
- `available`: The network is able to receive and respond to requests.
- `unavailable`: The network is not able to receive and respond to
requests for unknown reasons.
- `blocked`: The network is actively blocking requests based on the
user's geolocation. (This is specific to Infura.)
- `unknown`: We don't know whether the network can receive and respond
to requests, either because we haven't checked or we tried to check
and were unsuccessful.
This commit also changes how the network status is determined —
specifically, how many requests are used to determine that status, when
they occur, and whether they are awaited. Previously, the network
controller would make 2 to 3 requests during the course of running
`lookupNetwork`.
* First, if it was an Infura network, it would make a request for
`eth_blockNumber` to determine whether Infura was blocking requests or
not, then emit an appropriate event. This operation was not awaited.
* Then, regardless of the network, it would fetch the network ID via
`net_version`. This operation was awaited.
* Finally, regardless of the network, it would fetch the latest block
via `eth_getBlockByNumber`, then use the result to determine whether
the network supported EIP-1559. This operation was awaited.
Now:
* One fewer request is made, specifically `eth_blockNumber`, as we don't
need to make an extra request to determine whether Infura is blocking
requests; we can reuse `eth_getBlockByNumber`;
* All requests are awaited, which makes `lookupNetwork` run fully
in-band instead of partially out-of-band; and
* Both requests for `net_version` and `eth_getBlockByNumber` are
performed in parallel to make `lookupNetwork` run slightly faster.
* add e2e test for onboarding flow
* Add method to test if we create a new wallet
* fix code
* editng code
* Add test if import wrong SRP
* fix test
* add test where we chack if user select diffrent type of SRP
* update test for checking if user select different SRP
* update code
* add test for if user enter wrong password in confirm password field
* add two test to verify if user is on correct page after import wallet
* update cod
* lint fix
* fix code to test pass
* fix code
* improve code
* change completeCreateNewWalletOnboardingFlow function parameters and update code
* delete unnecessary wait
---------
Co-authored-by: dzfjz <120640011+dzfjz@users.noreply.github.com>
Co-authored-by: dzfjz <dzenana.fejzic-ext@consensys.net>
* Revert "Moved subscribe and filter into network controller (#16693)"
This reverts commit 6f6984fa58. That
commit was an RPC middleware refactor intended to move the subscribe
and filter middleware into the network controller, to simplify the
process of sharing this middleware between clients.
This refactor resulted in `eth_subscribe` notifications being sent on
the wrong connections, causing the UI to break in some cases (the UI
`provider` connection does not support notifications). This happened
because the `setupProviderEngine` function runs per-connection,
whereas the engine setup inside the network controller is global. The
global network client cannot support notifications because it has no
way to route them; they'll need to stay in the per-connection provider
engine.
Closes#17467
* Add e2e test
An e2e test has been added that confirms subscriptions are only
broadcast to the site that registered them. This test fails on
`develop`.
* Removed a feature flag
* Add test for transaction security provider
* add rest of the test cases for transaction security provider
* change code
---------
Co-authored-by: Filip Sekulic <filip.sekulic@consensys.net>
The PhishingController has been updated to v2. This release should
dramatically reduce network traffic and double the update speed of the
phishing list.
This was accomplished by combining both of our phishing configurations
into one list (the "stalelist"), then creating a separate list of the
changes just the past few days (the "hotlist"). Now users will download
a smaller list more frequently (every 30 minutes rather than every
hour), whereas the full list is only updated every 4 days.
The combined configuration means that we no longer know which list was
responsible for each block. The phishing warning page has been updated
to dynamically look this information up, to ensure users are still
directed to the correct place to dispute a block. This update to the
phishing warning page also includes the recent redesign.
* Ensure simulation failure warning is shown on all networks and accounts
* Add e2e test to cover failure warning behaviour on non-eip-1559 network
* Fix new e2e test
* Added translation for eth sign toggle
* Disabled the ability to call eth_sign by default. Added ability within advanced settings to renable support for eth_sign
* Add test case for eth_sign being enabled and disabled
* Modified copy
* Moved rpc method preference to its own object within store
* Complete work on moving rpc method preference into its own object within store
* Fix with prettier
* Fix lint
* Fix a unit test
* Fix test
* Renamed function and object keys to be more intuitive
* Fix e2e test
* Enabled eth_sign through preferences fixture
* Fix lint
* Fix e2e test
Wait for the notification popup to close, leaving 2 window handles the extension and the test dapp
* Fix e2e test
* Fix unit test
Enable eth_sign method
* Lint fix
---------
Co-authored-by: PeterYinusa <peter.yinusa@consensys.net>
Co-authored-by: Dan J Miller <danjm.com@gmail.com>
* add test for deleting added custom network
* update code because of failing on firefox browser
* changing steps for adding custom network
* chage code for custom network
* Recipient name passed to confirm-page-container component should be used if pet name exists for the to address
* Ensure recipient edit/add popup is shown for non-owned accounts
* Ensure contract name is rendered if it exists for recipient address
* Ensure that shortened address is last fallback after account, addressbook, token and ens names
Fix e2e test
Update siteicon for v4 signature type
Code refactor
Code refactor
Remove origin and address in signatrue request
Update e2e tests
Use getNetworkName function
Move header component inline jsx
Update snaps
* Wait until element is not present
* Wait for non empty element on add account test
* Wait for non empty element for all instances of get account text
* Point to account value directly
* Add accounts as const
* Prevent user from editing a contract interaction created by a dapp
* Code cleanup
* Fix e2e test selector
* Fix e2e test
* Fix e2e test
* Update snapshot
