* addding the legacy tokenlist, tuning token detection OFF by default, adding new message while importing tokens
updating the controller version and calling detectNewToken on network change
fixing rebase error
Run yarn lavamoat:auto for updating policies
updating lavamoat
Deleted node modules and run again lavamoat auto
fixing rebase issues
updating lavamoat policies
updating lavamoat after rebasing
policies
updating custom token warning and blocking detectedtoken link when tpken detection is off for supported networks
to update the token in fetchTosync
updating the contract map object
Revert build-system lavamoat policy changes
Move token list selection logic from components to getTokenList selector
updating the tokenList
Update lavamoat
Fix error
updating lavamoat
lint fix
fix unit test fail
fix unit test fail
lint fix
fixing rebase locale error
rebase fix
Revert build-system policy changes
temp
addressing review comments
* rebase fix
* Fix speed-up/cancel: don't update existing transaction data
* Move retryTxMeta state management to useGasFeeInputs.js
* Handle initial retryTxMeta set if no transaction is passed to useGasFeeInputs
* Ensure previousGas is use on retry transaction if it is available in useGasFeeInputs
* Remove update transaction mock and correctly test gas fee increase scenarios now that updateTransaction used in cancel-speedup is defined on the front end
* Show fiat on confirm screen on multilayer-fee network
* Disable gas editing on optimism
* Fix send max mode on optimism
* Represent layer 2 gas fee as a single value
* Hide gas fee edit UI on optimism
* Improvement multilayer-fee-message styling
* Lint fix
* Fix locales
* Remove unnecessary code change
Co-authored-by: David Walsh <davidwalsh83@gmail.com>
* Draft methods to brak updateTransaction into smaller more targeted
methods.
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
* This is a combination of 76 commits.
normalize and validate tx params.
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
Method to normalize tx and check if it's unapproved.
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
Move the methods to controllers/transactions/index.js
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
Flesh out the methods to update transaction with custom notes.
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
enforce that only the properties for the specific methid can be updated via the method.
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
Test update gas fees
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
Update swap approval transaction
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
use lodash to remove undefined properties
update swap transaction tests
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
Updates transaction user settings.
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
Lint fixes.
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
Add more parameters to updateSwapTransaction
approvalTxId
estimatedBaseFee
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
Add Update Transaction Metrics
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
Update transaction gas fees actions.js
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
Lint fixes.
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
Update EIP 1559 Params.
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
Lint Fixes.
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
Documentations.
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
Remove metrics from this PR
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
Lint fixes: Removed unused variables
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
Add more params to updateTransactionGasFees.
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
Update eip1559 method to editableParams.
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
lint fixes.
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
Fix Mocha tests
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
add gasPrice to updateEditableParams
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
Remove duplicated Params in notes.
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
A few more tests to cover if
transaction status is not unapproved
transaction is passed more parameters than it requires.
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
Update Transaction Gas Fees.
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
Update gas fees in edit-gas-popover.
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
Remove metrics.
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
Update gas settings and user settings.
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
Lint fixes.
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
Fix unit tests.
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
Lint fixes.
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
Draft methods to brak updateTransaction into smaller more targeted
methods.
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
normalize and validate tx params.
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
Method to normalize tx and check if it's unapproved.
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
Move the methods to controllers/transactions/index.js
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
Flesh out the methods to update transaction with custom notes.
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
Test update gas fees
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
Update swap approval transaction
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
use lodash to remove undefined properties
update swap transaction tests
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
Updates transaction user settings.
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
Lint fixes.
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
Add Update Transaction Metrics
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
Update transaction gas fees actions.js
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
Lint fixes.
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
Update EIP 1559 Params.
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
Lint Fixes.
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
Documentations.
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
Remove metrics from this PR
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
Lint fixes: Removed unused variables
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
Add more params to updateTransactionGasFees.
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
Update eip1559 method to editableParams.
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
lint fixes.
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
Fix Mocha tests
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
add gasPrice to updateEditableParams
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
Remove duplicated Params in notes.
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
A few more tests to cover if
transaction status is not unapproved
transaction is passed more parameters than it requires.
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
Update Transaction Gas Fees.
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
Remove metrics.
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
Update gas settings and user settings.
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
Lint fixes.
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
Fix unit tests.
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
Lint fixes.
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
Remove dup;icated method from rebase.
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
unrelated change
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
Force re-run workflow
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
Lint fix
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
Do not hideLoading since we're not showing it.
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
UpdateTransaction should be renamed to updateGasFees
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
updateGasFees in gas-modal-page-container.
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
fix:
update previous gas params update method
add types to the jsdoc comments.
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
updateTransactionGasFees should have been updatePreviousGasParams
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
Previous gas fees can be updated for confirmed transactions.
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
add updatePreviousGasParams to mocked functions.
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
Lint fixes
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
* we need to await the first dispatch before we call the second
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
* update values to make tests pass
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
* More changes to make e2e pass
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
* Need to wait a bit after save for changes to take effect.
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
* Remove merge comments.
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
* Await one dispatch before calling another
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
* We don't need goHome anymore.
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
* Tests must use async...await syntax too since we have await in the
useTranasctionFunction
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
* Add delay after button click for values to update
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
* Wait a moment after clicking save for values to update
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
* Wait after clicking save...
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
* Merge update transaction gas fees and transaction user settings
Show loading indicator on edit gas popover
Fix tests.
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
* Lint fixes
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
* Fix JSDoc
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
* updatePreviousGasParams should also return updated transaction meta.
Signed-off-by: Akintayo A. Olusegun <akintayo.segun@gmail.com>
* fix issue where we show contract address as recipient when calling safe transfer method on erc721 or erc1155 contracts
* updates function name getTransactionData -> parseStandardTokenTransactionData, and adds documentation
* make use of getTokenStandardAndDetails method exposed on assetsContractController to determine how to represent the contract being interacted with in token contract method calls
* ConnectedAccountsPermissions: convert to FC
* permissions: add usePermissionsDescriptions
- fix ConnectedAccountsPermissions eth_accounts i18n
* ConnectedAccountsPermissions: rm .component
from path
* ConnectedAccountsPermissions: fix toggleExpanded
ensure we change previous state value
Co-authored-by: Mark Stacey <markjstacey@gmail.com>
Co-authored-by: Mark Stacey <markjstacey@gmail.com>
This PR adds `snaps` under Flask build flags to the extension. This branch is mostly equivalent to the current production version of Flask, excepting some bug fixes and tweaks.
Closes#11626
* Do not call `decimalToHex` for `minimumGasLimit`, which is already in hex
* Add `0x` prefix when returning a gas estimate
* Fix UTs
Co-authored-by: Dan J Miller <danjm.com@gmail.com>
When a lot of transactions are occurring on the network, such as during
an NFT drop, it drives gas fees up. When this happens, we want to not
only inform the user about this, but also dissuade them from using a
higher gas fee (as we have proved in testing that high gas fees can
cause bidding wars and exacerbate the situation).
The method for determining whether the network is "busy" is already
handled by GasFeeController, which exposes a `networkCongestion`
property within the gas fee estimate data. If this number exceeds 0.66 —
meaning that the current base fee is above the 66th percentile among the
base fees over the last several days — then we determine that the
network is "busy".
ESLint rules have been added to enforce our JSDoc conventions. These
rules were introduced by updating `@metamask/eslint-config` to v9.
Some of the rules have been disabled because the effort to fix all lint
errors was too high. It might be easiest to enable these rules one
directory at a time, or one rule at a time.
Most of the changes in this PR were a result of running
`yarn lint:fix`. There were a handful of manual changes that seemed
obvious and simple to make. Anything beyond that and the rule was left
disabled.
The ESLint config for the extension explicitly includes support for
Prettier. However, this is already being provided by our global ESLint
config (`@metamask/eslint-config`). Therefore there is no need to
include it here. In fact, this is causing weird issues where the `curly`
option is getting overridden somehow. After this change, these syntaxes
are invalid:
``` javascript
if (foo) return;
```
``` javascript
if (foo) return 'bar';
```
* added wrapper around account list to prevent storybook from collapsing the list
* updated translation files
* added snap-connect page
* refactored account list out of the choose account component
* fixed width
* removed unnecessary scss from choose-account component, fixed props in choose account story
* removed snaps-connect page, added comments to ChooseAccount
* updated choose account subtitle text, updated styling for title & subtitle, removed redundant account list story
* updated component name, updated paths
* fixed linter errors
* added comments
* removed unused message
* removed selectAccounts key from all locales
* updated class name for account list header, updated allAreSelected function to use length checks
* Revert "removed unused message"
This reverts commit 32771bc83c08f120825ef75f0741f3034e7dbecb.
* Revert "removed selectAccounts key from all locales"
This reverts commit ccfa4a860f9a75693d893d7c404384e719de297e.
* updated locale messages to use selectAccounts key
* removed stray import
* updated scss
* updated translation key
* removed chooseAccounts key from en locale
* removed optional chaining
* changes
* updated subjectMetadata
* updated subject types
* update useOriginMetadata function to include unknown subject type
* updated permission connect header props, removed host and added subjectType to targetSubjectMetadata
* added subjectType to targetSubjectMetadata
* removed console.log
* changed prop name to iconUrl
The ESLint config has been updated to v8. The breaking changes are:
* The Prettier rule `quoteProps` has been changed from `consistent` to
`as-needed`, meaning that if one key requires quoting, only that key is
quoted rather than all keys.
* The ESLint rule `no-shadow` has been made more strict. It now
prevents globals from being shadowed as well.
Most of these changes were applied with `yarn lint:fix`. Only the
shadowing changes required manual fixing (shadowing variable names were
either replaced with destructuring or renamed).
The dependency `globalThis` was added to the list of dynamic
dependencies in the build system, where it should have been already.
This was causing `depcheck` to fail because the new lint rules required
removing the one place where `globalThis` had been erroneously imported
previously.
A rule requiring a newline between multiline blocks and expressions has
been disabled temporarily to make this PR smaller and to avoid
introducing conflicts with other PRs.
# Permission System 2.0
## Background
This PR migrates the extension permission system to [the new `PermissionController`](https://github.com/MetaMask/snaps-skunkworks/tree/main/packages/controllers/src/permissions).
The original permission system, based on [`rpc-cap`](https://github.com/MetaMask/rpc-cap), introduced [`ZCAP-LD`](https://w3c-ccg.github.io/zcap-ld/)-like permissions to our JSON-RPC stack.
We used it to [implement](https://github.com/MetaMask/metamask-extension/pull/7004) what we called "LoginPerSite" in [version 7.7.0](https://github.com/MetaMask/metamask-extension/releases/tag/v7.7.0) of the extension, which enabled the user to choose which accounts, if any, should be exposed to each dapp.
While that was a worthwhile feature in and of itself, we wanted a permission _system_ in order to enable everything we are going to with Snaps.
Unfortunately, the original permission system was difficult to use, and necessitated the creation of the original `PermissionsController` (note the "s"), which was more or less a wrapper for `rpc-cap`.
With this PR, we shake off the yoke of the original permission system, in favor of the modular, self-contained, ergonomic, and more mature permission system 2.0.
Note that [the `PermissionController` readme](https://github.com/MetaMask/snaps-skunkworks/tree/main/packages/controllers/src/permissions/README.md) explains how the new permission system works.
The `PermissionController` and `SubjectMetadataController` are currently shipped via `@metamask/snap-controllers`. This is a temporary state of affairs, and we'll move them to `@metamask/controllers` once they've landed in prod.
## Changes in Detail
First, the changes in this PR are not as big as they seem. Roughly half of the additions in this PR are fixtures in the test for the new migration (number 68), and a significant portion of the remaining ~2500 lines are due to find-and-replace changes in other test fixtures and UI files.
- The extension `PermissionsController` has been deleted, and completely replaced with the new `PermissionController` from [`@metamask/snap-controllers`](https://www.npmjs.com/package/@metamask/snap-controllers).
- The original `PermissionsController` "domain metadata" functionality is now managed by the new `SubjectMetadataController`, also from [`@metamask/snap-controllers`](https://www.npmjs.com/package/@metamask/snap-controllers).
- The permission activity and history log controller has been renamed `PermissionLogController` and has its own top-level state key, but is otherwise functionally equivalent to the existing implementation.
- Migration number 68 has been added to account for the new state changes.
- The tests in `app/scripts/controllers/permissions` have been migrated from `mocha` to `jest`.
Reviewers should focus their attention on the following files:
- `app/scripts/`
- `metamask-controller.js`
- This is where most of the integration work for the new `PermissionController` occurs.
Some functions that were internal to the original controller were moved here.
- `controllers/permissions/`
- `selectors.js`
- These selectors are for `ControllerMessenger` selector subscriptions. The actual subscriptions occur in `metamask-controller.js`. See the `ControllerMessenger` implementation for details.
- `specifications.js`
- The caveat and permission specifications are required by the new `PermissionController`, and are used to specify the `eth_accounts` permission and its JSON-RPC method implementation.
See the `PermissionController` readme for details.
- `migrations/068.js`
- The new state should be cross-referenced with the controllers that manage it.
The accompanying tests should also be thoroughly reviewed.
Some files may appear new but have just moved and/or been renamed:
- `app/scripts/lib/rpc-method-middleware/handlers/request-accounts.js`
- This was previously implemented in `controllers/permissions/permissionsMethodMiddleware.js`.
- `test/mocks/permissions.js`
- A truncated version of `test/mocks/permission-controller.js`.
Co-authored-by: Mark Stacey <markjstacey@gmail.com>
A redundant comparison for the `EIP_1559_V2_ENABLED` variable has been
removed. This variable is a boolean, so it can be treated as a boolean
directly in most cases.
One such comparison has been preserved for the purpose of allowing unit
testing, because `process.env` entries are always strings in Node.js. A
comment was added to explain this.
* Trigger Build
* Trigger Build
* Move swaps index variables to redux
* all optimizations so far
* Add better equality checks for selectors in swaps index and build quote
* Clean up PR, remove extra code and logs
* Clean up lavamoat file
* Fixes for optimizations
* Update tests and test snapshots
* Remove unnecessary tests
* Remove unnecessary console log
* Trigger Build
* Trigger Build
* Add delay to account for remote call made by trezor keyring
Co-authored-by: Dan Miller <danjm.com@gmail.com>
* fix missing conversion rates in swaps token drop down
* make defaultToken appear at the top of the owned section of the dropdown with full renderable data regardless of whether swaps tokens are available
* revert change to filter non-native tokens with symbol ETH
* Replace hardcoded sent ether label on confirm screen
* replace transaction type SENT_ETHER with network agnostic SENDING_NATIVE_ASSET
* remove sentEther translation base
* make backwards compatible with lingering transaction of legacy sentEther type
* update localalization files
* fixup legacy sentEther transaction type
* changing new transaction type away from localization string
* revert migration tests
* update fixtures and test data
* update name of new transaction type
* add migration
* remove legacy SENT_ETHER from transaction types enum object
* Allow submission of transactions with dapp suggested gas fees, while estimates are loading
* Allow editing of transactions with dapp suggested feeds, while estimates are still loading
* Ensure that advanced gas is always editible inline when gas is loading
* Ensure that insufficient balance error is shown when gas is loading if the user has customized the gas
* Only set gas price insufficient errors if the current network is non-eip-1559, or the txparams actually have a gas price
* Remove unnecessary param
* lint fix
* ensure insufficient balance warning is showing when loading
* Ensure that eip1559 network transactions do not combined eip1559 and non-eip1559 gas fee properties
* Lint fix
* Hide gasTiming on edit-gas-popover when form is in error
* Show unknown processing error if maxFeePerGas is too low for network conditions
* remove unnecessary change
* remove unnecessary function wrapper
* Fixes updates on the confirm screen.
* Better handling of internal send transactions
* maxFee -> maxFeePerGas property name fix
* Remove redundant setEstimateToUse call in onManualChange
* Fix unit tests
* rebase error fix
* Fixes to speedup loading and transaction breakdown priority fee
* Fix lint and unit tests
* Ensure gas price based transaction that have been customized (e.g. speed up and retry) are properly initialized in useGasFeeInputs
* Clean up
* Link fix