* Various component tests and some conditional statements
Conditional in account-menu in removeAccount when keyring sometimes is not initially provideed
Conditional on unlock-page when there is no target.getBoundingClientRect on the element.
* Update helpers
* Remove component debugging
* Add default params for render helpers
* Remove stubComponent for old Mascot
Changes in https://github.com/MetaMask/metamask-extension/pull/7893 has prevented the need to stub it out.
Change logout to lock in account-menu test
The custom spend limit was previously not validated. It did have a
minimum of zero set, but this didn't have any affect (that minimum is
used for form constraint validation, and this field wasn't in a form).
The field was never checked to ensure the contents didn't exceed the
maximum.
The field is now checked for values that exceed the maximum, and
invalid values in general (including negative values).
The parameters to the `showEditApprovalPermissionModal` were also
alphabetized to make them easier to read. In the course of doing this,
I noticed that the origin was missing from one of the calls. This was
responsible for the modal saying "Spend limit requested by undefined"
when clicking "Edit" under the transaction details. This has been
fixed.
These two functions differ slightly in options, but none of those
options are being used by us, so in these cases they're functionally
equivalent. They're even both descendants of the original `debounce`
function from `underscore`.
This was done to reduce the number of direct dependencies we have. It
should not affect bundle size, as we still depend upon the `debounce`
package transitively.
This was done to reduce the number of direct dependencies we have. It
should be functionally equivalent. The bundle size should not change,
as we use `clone` as a transitive dependency in a number of places.
In the case where the initial spend limit for the `approve` function
was set to the maximum amount, editing this value would result in the
new limit being silently ignored. The transaction would be submitted
with the original max spend limit.
This occurred because function to generate the new custom data would
look for the expected spend limit in the existing data, then bail if
it was not found (and in these cases, it was never found).
The reason the value was not found is that it was erroneously being
converted to a `Number`. A JavaScript `Number` is not precise enough to
represent larger spend limits, so it would give the wrong hex value
(after rounding had taken place in the conversion to a floating-point
number).
The data string is now updated without relying upon the original token
value; the new value is inserted after the `spender` argument instead,
as the remainder of the `data` string is guaranteed to be the original
limit. Additionally, the conversion to a `Number` is now omitted so
that the custom spend limit is encoded correctly.
Fixes#7915
* Use ref instead of findDOMNode in jazzicon component
The jazzicon component was using `findDOMNode` to get the DOM node for
the main div returned by the component, which is generally not
recommended. Instead a ref is now used.
* Update Jazzicon to v2
This version drops the dependency upon `raphael`, and no longer uses
the function `createSVGMatrix` which was causing unit tests to fail
(because it's not supported by jsdom).
After updating the custom spend limit on the approve screen, the data
for the transaction was not being updated. Instead it showed the
original transaction data. The transaction data was being updated
correctly in the final transaction though.
The approve screen has been updated to ensure changes to the custom
spend limit are reflected correctly in the data shown.
Update accounts permission history on accountsChanged
Create PermissionsLogController
Fix permissions activity log pruning
Add selectors, background hooks for better UX
Make selected account the first account returned
Use enums for store keys in log controller
Add last selected address history to PreferencesController
* Update lodash
All versions of the full `lodash` package have been updated to 4.17.15.
The only exception is v4.17.14 which is pinned by `ganache-core`.
* Switch to using `lodash` instead of per-method packages
We have the full lodash package _ten times_ as a production transitive
dependency, so including per-method packages is not saving space (it
might instead result in slightly more space being used).
Any error caught during a React component render or lifecycle method
will now be caught by the top-level error boundary, which shows the
user this new error page. The error page will display a simple error
message, and will show the details of the error in a collapsible
section.
The caught error is also reported to Sentry.
In development the error will be re-thrown to make it easier to see on
the console, but it is not re-thrown in production.
* Remove unnecessary `getEnvironmentType` parameter
The default value of the first parameter is `window.location.href`, so
there is no need to pass it in explicitly.
* Remove junk parameter from `getEnvironmentType` invocation
`getEnvironmentType` doesn't need to be passed any parameter, as the
default value is `window.location.href` which is generally what is
wanted. In this case, the variable `location.href` was always
`undefined` anyway. This particular `location` variable is from React
Router, and does not have an `href` property.
* Fix comment for `getEnvironmentType`
One of the possible return values was referred to by the wrong name.
`withRouter` has been removed from any components that were not using
any of the three props injected by `withRouter`: `history`, `location`,
and `match`.
`compose` is a no-op when called upon a single component, so it has
been removed in all such cases.
The only web API that our usage of DetectRTC relied upon was
'enumerateDevices', which is supported and stable among all of our
supported browsers.
Note that the error handling here is a little... non-standard, and the
logic around how Firefox and Brave are handled should be justified, but
I've left the logic as-is for now to keep this PR small.
The WebRTC spec is fairly stable these days, particularly among the
browsers we support. We don't need this shim for anything. I'm guessing
it may have been added primarily with IE in mind.
The filename is seeded by a simple use of Math.random() pulling from an alphanumeric character bank, as opposed to a more cryptographically random solution. This provides a simple layer of difficulty for bad actors to seek out the recovery phrase file.
The 'can retype the seed phrase' test would fail sometimes when one of
the words in the seed phrase was a subset of another word (e.g. 'issue'
and 'tissue'). This is because the selector used to find the word
looked for the first element that contained the text, rather than an
exact match.
To simplify the selector and make it more reliable, test ids were added
to each seed phrase word. The selector now uses CSS instead of XPath,
and it only finds exact matches.
A test id was also added to the div containing the shuffled seed words
to select from, so that the chosen seed words wouldn't be selected
in place of the real target when the same word appears twice.
The `confirm-seed-phrase` component extends PureComponent, so it
doesn't need a `shouldComponentUpdate` function. The state is
effectively immutable, as all state is either a primitive type or is
updated with new instances rather than mutation.
Removing this function will silence a warning message printed to the
console during e2e tests (React doesn't want you to set this function
on `PureComponent`s).
Removing this function also exposed an unused piece of state, which has
also been removed.
The `withFixtures` helper will instantiate ganache, a web driver, and
a fixture server initialized with the given set of fixtures. It is
meant to facilitating writing small, isolated e2e tests.
The first example test has been added: simple-send. It ensures that the
user can send 1 ETH to another account.
These new e2e tests will run during the normal e2e test run.
Closes#6548
The e2e tests were failing intermittently after removing an account
because the account was shown as not deleted after the removal. I
suspect this was because the account _had_ been removed, but that
change to the background state hadn't yet propagated to the UI.
The background state is now synced before the loading overlay for
removing the account is removed, ensuring that the removed account
cannot be seen in the UI after removal.
* Remove unused functions from `mapDispatchToProps`
The actions import was also updated to import only the two actions
used, rather than all actions.
* Remove unused container component
Well, technically it was the props injected by this container that were
unused. The container served no purpose, so the component it surrounded
is now used directly instead.
* Remove both unused `getCurrentViewContext` selectors
* Remove unused SHOW_CONFIG_PAGE action
* Remove checks for `currentView` with name `config`
Now that the SHOW_CONFIG_PAGE action has been removed, it's no longer
possible for `currentView.name` to be set to that value.
* Remove unused `wallet-view` container props
* Delete unused SHOW_SEND_PAGE and SHOW_ADD_TOKEN_PAGE actions
* Remove unused `account-menu.container` props
* Remove unused SHOW_INFO_PAGE action
* Remove unused SET_NEW_ACCOUNT_FORM action
As of #7753, the `onBlur` prop is no longer used for the `token-input`
and `currency-input` components, and the associated wrapper components
and the shared underlying component. It as been removed from all of
them.
These rows on the Advanced Settings page were being looked up in the
e2e tests by the order they appeared in. Instead they're now referenced
by data id, so that we can add new settings and re-arrange them without
breaking the e2e tests.
The transaction navigation in the e2e tests has been made simpler with
the addition of data attributes to help with finding the navigation
buttons. Each button is now labelled according to its purpose.
* Specify type before parameter name
Various JSDoc `@param` entries were specified as `name {type}` rather
than `{type} name`.
A couple of `@return` entries have been given types as well.
* Use JSDoc optional syntax rather than Closure syntax
* Use @returns rather than @return
* Use consistent built-in type capitalization
Primitive types are lower-case, and Object is upper-case.
* Separate param/return description with a dash
