The transaction list now filters by token in the `TransactionList`
component instead of in the transaction selector. This was done in
preparation for the asset page work.
Technically this approach is slightly less efficient than before, as
we're now filtering the transactions after they've been grouped
together rather than beforehand. The difference is minimal though, and
this method is more correct.
The old filtering was broken because it inappropriately filtered out
cancel transactions. Cancel transactions always have the `to` address
set to the same as the `from` address, and the token filter only
returned transactions where the `to` address was set to the token
address.
Now that we're only filtering by the `to` address of the initial
transaction, token transaction groups will be included in their
entirety, including any cancel transactions.
The fullscreen UI now shows roughly the same design as the popup UI.
A few additional changes depicted in the new fullscreen designs will
be implemented in subsequent PRs (e.g. the inline buttons on assets)
This was done now to make asset pages easier to implement. Implementing
asset pages solely for the popup UI would have been complicated by the
fact that we use viewport size to switch between the two layouts, so we
would have had to re-route upon resizing the window.
The `TransactionViewBalance` component has been split into three
separate components. This was done primarily to make the asset page
easier to implement. Also the name `TransactionViewBalance` didn't
describe this component very well anymore.
Instead of the Ethereum and token-specific logic being in the same
component, the two cases were split into the `EthOverview` and
`TokenOverview` components respectively. They both use the
`WalletOverview` component, which has the structure shared by both
cases.
This changeset updates the `getOriginOfCurrentTab` selector and the container
for the ConnectedSites page to use `activeTab.origin` instead of parsing the
URL. The `activeTab` URL is parsed in `queryCurrentActiveTab` before the UI is
launched and any subsequent parsing of the URL is unnecessary.
See `queryCurrentActiveTab` in `ui.js:86` [1].
[1]:e7bb0876f5/app/scripts/ui.js (L86-L118)
The tabs on the Home page have been updated to match the new home
screen designs.
A new `activeClassName` prop was added to the `Tab` component to allow
applying different styles to the active tab state.
I ran into specificity problems when overriding the default `Tab` styles
because the import order of our CSS is bizarre and wrong. For now I've
used a crude workaround, but we can fix this properly later by changing
the import order to place styles likely to be overridden first.
Add alert suggesting that the user switch to a connected account. This
alert is displayed when the popup is opened over an active tab that is
connected to some account, but not the current selected account. The
user can choose to switch to a connected account, or dismiss the alert.
This alert is only shown once per account switch. So if the user
repeatedly opens the popup on a dapp without switching accounts, it'll
only be shown the first time. The alert also won't be shown if the user
has just dismissed an "Unconnected account" alert on this same dapp
and account, as that would be redundant.
The alert has a "Don't show me this again" checkbox that allows the
user to disable the alert. It can be re-enabled again on the Alerts
settings page.
The unconnected account alert can now be disabled. A "don't show this
again" checkbox has been added to the alert, which prevents that alert
from being shown in the future.
An alert settings page has been added to the settings as well. This
page allows the user to disable or enable any alert.
A change made in #8284 had the unintended side-effect of making this
scrollbar appear on the home screen. Previously it was scrollable
without any scroll bar being visible.
Resolves three different style issues due to overflow of content
and addresses an issue where UI was being squished due to available
screen real estate.
- On the choose account modal, when a user has enough accounts to need
to scroll within the account chooser, the last-connected data column
was squished. This is resolved by using a tooltip and icon for this data
rather than text printed in column.
- On the connection permission result screen where it shows the Dapp icon ->
Metamask icon, the bottom of the logos and dropshadows were being cut off
this was resolved by removing the height set on this element and allowing
it to fill the available space.
- On the confirmation screen the content appeared off center due to the scrollbar being overlayed instead of auto. This was resolved by removing some of the setting of manual overflow controls on the body element.
* Remove `estimatedGas` property from `txMeta`
The `estimatedGas` property was a cache of the gas value estimated for
a transaction when the default gas limit was set. This property wasn't
used anywhere. It may have been useful for debugging purposes, but the
same gas estimate is already stored on the `history` property so it
should be present in state logs regardless.
* Remove `gasLimitSpecified` txMeta property
The `gasLimitSpecified` property of `txMeta` wasn't used for anything.
It might have been useful for debugging purposes, but whether or not
the gas limit was specified can also be determined from looking at the
transaction history, so it's not a huge loss.
* Remove `gasPriceSpecified` txMeta property
The `gasPriceSpecified` property of `txMeta` wasn't used for anything.
It might have been useful for debugging purposes, but whether or not
the gas price was specified can also be determined from looking at the
transaction history, so it's not a huge loss.
* Remove `simpleSend` txMeta property
The `simpleSend` property of `txMeta` was used to ensure a buffer was
not added to the gas limit during gas estimation for simple send
transactions. It was made redundant by #8484, which accomplishes this
without the use of this property.
An alert is now shown when the user switches from an account that is
connected to the active tab to an account that is not connected. The
alert prompts the user to dismiss the alert or connect the account
they're switching to.
The "loading" state is handled by disabling the buttons, and the error
state is handled by displaying a generic error message and disabling
the connect button.
The new reducer for this alert has been created with `createSlice` from
the Redux Toolkit. This utility is recommended by the Redux team, and
represents a new style of writing reducers that I hope we will use more
in the future (or at least something similar). `createSlice` constructs
a reducer, actions, and action creators automatically. The reducer is
constructed using their `createReducer` helper, which uses Immer to
allow directly mutating the state in the reducer but exposing these
changes as immutable.
`removeFromAddressBook` returned a thunk that didn't return a Promise,
despite doing async work. It now returns a Promise.
The callers were updated to `await` the completion of this operation.
`addToAddressBook` returned a thunk that didn't return a Promise,
despite doing async work. It now returns a Promise.
The callers of this action creator were updated to `await` the
completion of the operation. It was called just before redirecting the
user to a different page or closing a modal, and it seemed appropriate
to wait before doing those things.
The `shift-list-item` component for displaying ShapeShift transactions
has been removed, along with three other components that were used
solely by that component (`copyButton`, `eth-balance`, and
`fiat-value`).
This component hasn't been used in some time, as ShapeShift
transactions no longer exist to display. The controller that ShapeShift
transactions originated from was removed in #8118, and it became
impossible to create new ShapeShift transactions from within MetaMask
in #6746
The `transForward` app state is no longer used, so it has been removed.
Associated actions have been removed as well.
This state dates back a few years, so I was unable to determine when it
was made obsolete.
The `estimateGasMethod` function passed to `estimateGas` is now an
async function. It is now invoked using `async/await` rather than a
Promise constructor.
This was done as part of a broader effort to use Promises rather than
callbacks when interacting with the background.
`markPasswordForgotten` is an asynchronous function, but it was being
called synchronously. The page was redirected without waiting for the
operation to complete.
We now wait for the operation to complete before continuing. Failure is
still not being handled correctly, but that will be addressed in a
separate PR.
* Add popover for informing user about the connected status indicator
* Ensure user only sees connected status info popover once
* Default connectedStatusPopoverHasBeenShown to true and set it to false in a migration
* Add unit test for migration 42
* Initialize AppStateController if it does not exist in migration 42
* Update connect indicator popup locale text
* Code cleanup for connected-indicator-info-popup
* Code cleanup for connected-indicator-info-popup
Previously all browser globals were allowed to be used anywhere by
ESLint because we had set the `env` property to `browser` in the ESLint
config. This has made it easy to accidentally use browser globals
(e.g. #8338), so it has been removed. Instead we now have a short list
of allowed globals.
All browser globals are now accessed as properties on `window`.
Unfortunately this change resulted in a few different confusing unit
test errors, as some of our unit tests setup assumed that a particular
global would be used via `window` or `global`. In particular,
`window.fetch` didn't work correctly because it wasn't patched by the
AbortController polyfill (only `global.fetch` was being patched).
The `jsdom-global` package we were using complicated matters by setting
all of the JSDOM `window` properties directly on `global`, overwriting
the `AbortController` for example.
The `helpers.js` test setup module has been simplified somewhat by
removing `jsdom-global` and constructing the JSDOM instance manually.
The JSDOM window is set on `window`, and a few properties are set on
`global` as well as needed by various dependencies. `node-fetch` and
the AbortController polyfill/patch now work as expected as well,
though `fetch` is only available on `window` now.
This new checkbox component uses a plain `input` component internally,
so the browser treats it like a native checkbox. It is styled by hiding
the native checkbox and replacing it with Font Awesome icons (the same
that we are using in Figma).
Support for a 'disabled' state and an indeterminate state has been
added as well. The `onClick` prop has been made optional, as it may not
be required if the parent component is intercepting the click instead.
The `regular` Font Awesome font style needed to be added so that we
could use the `far fa-square` icon for the unchecked checkbox.
This change replaces `getRenderablePermissionsDomains` with a new selector `getConnectedDomainsForSelectedAddress` that works better. The data returned from this selector is used to populated the _Connected Sites_ modal, which (as of #8262) didn't use most of the data returned from the old selector.
The old selector only looked at the first address that was exposed, making it not work for anything other than the first account connected to a particular origin.
The last active time for each account in the Connected Sites list was
formatted as `yyyy-M-d` (i.e. without the zero-padding for the month
and the day). This didn't match the designs, isn't compliant with
ISO-8601, and generally isn't a common date format.
The month and day are now zero-padded.
* Connect screen popup redesign
* Open permission request in notification instead of tab
* Remove no longer user locales
* Update permissions unit test mock to accout for change of opts passed to permissions controller
* Lint fix
* Inline broken line svg in permission-page-container-content.component.js for faster loading
* Add back button to second screen on connect flow
* Add xOfY locale and use for the page count in the connect flow
* Lint fix for svgs permission-page-container-content.component.js
* Fix rebase error
* Lint fix
* Clean up styles on the connect-screen-into-popup branch
* Use closeCurrentWindow to close window on cancel when in full screen connect flow
* Handle errors in rejectPermissionsRequest
* Full screen styles for connect flow
* Lint fixed in permissions-connect and actions.js
* Redirect screen now shows metamask icon instead of users identicon
* Fix subtitle spacing in permissions-connect-header'
* Use window.close instead of closeCurrentWindow() in cancelPermissionsRequest
* Use permissions-connect-header__subtitle in permissions-connect-header.component
There were two existing cases where a footer was added to a popover by
putting it in the popover contents. This has been refactored to place
the footer in the popover instead, so that styles common to all
popover footers could be shared.
The popover now has a `section` element instead, giving the `header`
and `footer` elements a correct section context.
* Add UI for selecting multiple accounts on the first permissions connect screen
* Make accounts list scrollable on connect screen
* Change title wording on connect screen to 'select your accounts'
* Add select all tooltip to info circle on top of connect screen account list
* Add security info footer to the first screen of the connect flow
* Apply redesigns to page 2 of connect flow
* Display number of accounts on connect flow second screen if there are multiple to connect
* Update e2e tests for connect screen multi-select changes
* Remove unused chooseAnAcount message
* Fix styling/display of redirect elements on second page of connect flow
* Assorted small fixes in permissions connect
* Remove unnecessary tiny delays in spec files
* Remove incorrect use of bem modified in choose-account
* Remove unused locale
* Use Set for managing selected accounts in choose-acount and permissions-connect componets
* Compone!
* Move connect flow header into a reusable component, and implement new header designs
* Update locales and add missing locales
* Improve permission list item design (second screen of connect flow)
* Check box component improvements
* Fixes in variables.scss
* Simplfy code in selectAll of choose-account.component
* Hide checkboxes on first pages on connect flow when there is only one account
* Allow autofill of default new account modal text with right arrow
* Disable next button on first screen of connect flow when no accounts selected
* Improve choose-account/index.scss
* Remove metamask secure graphic
* Fix connect flow redirect screen
* Fix connectToMultiple locale
* Remove locales no longer used after connect flow multiple connect updates
* Fix size of dapp icon on redirect screen of connect flow
* Clean up choose-account code
* Stop using placeholder in new-account-modal
* Remove unused styles in permission-page-container/index.scss
* Pass origin instead of site name to PermissionsConnectHeader in connect flow
* Make iconName a required prop in permissions-connect-header
* Show checkbox in cases where there is one account in the choose-account list
* Do not render select all checkbox when only 1 list item, instead of just hiding it
* Small cleanup in choose-account/index.scss
* Fix home container height
The home container element's height was not set, so the lower half of
the home component was showing as the wrong color when the user had no
transactions or tokens.
This was broken in #8271, which was a fix for a different CSS problem.
Both problems should remain fixed now with height being set explicitly.
* Remove obsolete `flex` rule
This element is no longer within a flex container as of #8271, so this
rule doesn't do anything.
We don't need to store the current UI type as a global. We're already
using the `getEnvironmentType` helper function throughout the UI, so
we'd might as well use that instead of this global state.
The `History` title above the transaction history was changed in #8264
to only show when there are pending transactions, because it was
redundant to show an additional `History` title below a tab called
`History`. It was preserved when there were pending transactions
because the pending transactions are shown first in the list, followed
by the history, so the title served to divide the two lists.
This ended up breaking the fullscreen view though, which doesn't use
tabs yet. It has been updated to always show on fullscreen.
Two tabs have been created on the home screen: 'Assets' and 'History'.
This tabbed view is shown only on small screens (e.g. in the popup).
The fullscreen view is unchanged.
The toggle-able left sidebar no longer exists, so some 'sidebar-left'
specific code and styles have been removed. The button in the menu bar
has been removed as well.
The 'History' title of the transaction history is now redundant when
where are no pending transactions, so it as been conditionally hidden.
A passthrough for `data-testid` has been added to the Tab component for
convenience in e2e tests.
This commit updates the existing _Connected Sites_ section to a modal using
the `Popover` component. This will serve as a base for the new modal design.
The user-specified seed phrase during the first-time-flow import step
required the phrase to be entered in all lowercase. The case does not
add any extra entropy to the seed, so there's no reason to be case
sensitive. Flexibility here will improve the onboarding UX.
This commit makes the entered seed phrase case-insensitive.
Fixes#8171
The "i18n-provider" module has been replaced by a new `i18n.js` module
in the `contexts` directory which provides the `t` function via the new
React Context API.
The legacy context API is still used throughout the codebase, so a
legacy context provider has also been added as a shim until we migrate
away from the old API. The migration does require changing every single
place where the `t` function is used, so it is a non-trivial amount of
work. This shim allows us to tackle it one piece at a time without
breaking anything.
This was placed in a new `contexts` directory because it didn't seem
to belong in any existing categories. It certainly isn't a higher-order
component.
The translation helper function we use everywhere (`t`) would fallback
to the message `[${key}]` for any key not found in the set of localized
messages. Instead it how returns `undefined` in that case.
`[${key}]` isn't something you'd typically want to show to users, so
this fallback wasn't overly useful in practice. At best it served to
hide errors.
The falsey return value in the case where the message is missing makes
it easier to implement a fallback for that case. Such a fallback is
used in the `confirm-transaction-base` component, to restore the
fallback behavior accidentally changed in #8211
These two functions were not especially useful. `tOrDefault` was used
only by `tOrKey`, and `tOrKey` was only used in one place. All it did
was return the given `key` directly if it was falsey, so it was easily
replaced by a condition.
Previously a few mostly-empty `div`s would be shown if a render
happened while the confirm page was loading. Now nothing is shown. This
shouldn't impact users at all, as this condition should only last a
fraction of a second.
The address is blank momentarily when navigating to the confirmation
screen when sending a token. The address is updated in a subsequent
render.
The ENS reverse resolution is now only attempted if the address is
given. It has also been updated to attempt resolution when the address
is finally set, which fixes the reverse resolution for token sends.
I had hoped to get rid of this interim render-without-address, but that
turned out to be a bit more challenging. The problem is that the UI
submits transactions through the provider just as a dapp would, and the
provider doesn't say when the transaction is submitted. The promise
returned doesn't resolve until after confirmation. We would have to
start calling the background methods directly and bypass the provider
to get the feedback we need, and that sounded potentially dangerous.
Definitely a challenge for another day.
The `metamask.send.from` field was assumed by various selectors to be
an object, but instead it was recently set to a string. The selectors
have been updated to assume it's a string, and to fetch the full
account object explicitly.
The selector `getSendFromObject` was repurposed for this, as that's
basically what it already did. The optional address parameter was
removed though, as that was only used to fetch the `from` address in
cases where the `send` state was set without there being a `from`
address set. That case is no longer possible, as the `from` address is
always set upon the initialization of the `send` state.
The `getSendFromObject` selector no longer fetches the 'name' of that
address from the address book state either. This property was not used
in either of the cases this selector was used.
* Update i18n-helper to allow substitutions of react components and wrapping of translation substrings
* Simplify code in i18n-helper.js related to substitutions, including react substitutions.
* Remove wrapper support from i18n in favour of using translations in substitutions.
* Fix i18n-helper substitution logic: ensure correct index of substitution is applied
* Throw error if there are not enough substitutions for a translation phrase
* Adds unit tests for now i18n-helper substitution functionality
* Fix grammar, react element line spacing and test layout+readability in i18n-helper.test.js
The "Transaction View" component has been merged with the Home
component. The division between these two components seemed wrong
because the "Transaction View" contained the menu bar (distinctly a
"home" thing, not a "transaction" thing), and we will be adding more
non-transaction-related components shortly.
This also let us use a single `Media` component instead of two.
The notifications displayed on the home screen were being passed
through the `TransactionView` and `TransactionList` components before
being rendered. This was unnecessary because the notifications are
absolutely positioned.
They are now rendered directly in the home component where they're
defined. A helper function has been written to improve readability.
The styles used for the Home component were in the huge
"newui-sections" SCSS file. Instead they've been moved into an SCSS
module alongside the component, to follow our conventions.
The `main-container` class was left as-is because it is shared between
here and the settings page.
Implement `eth_decrypt` and `eth_getEncryptionPublicKey`. This allows decryption backed by the user's private key. The message decryption uses a confirmation flow similar to the messaging signing flow, where the message to be decrypted is also able to be decrypted inline for the user to read directly before confirming.
ENS currently supports a variety of tlds in addition to `.eth`, and
more will be supported in the future. Rather than hard-code a list of
supported ENS tlds, all valid domain names will now be interpreted as
potential ENS addresses in our address input component.
Closes#7978
The QR scanner component error handling would sometimes redirect the
user to the wrong page. It was also confusingly handled in two places;
the action used to open the QR scanner, and the scanner component.
The error handling has now been corrected, simplified, and integrated
into the QR scanner component itself.
The old way of handling an error within the component was to close the
modal, then call the action to open it all over again. This action took
a route parameter, which instructed the action on which route to open
if the fullscreen UI needed to be opened (as the fullscreen UI is the
only one where the browser will show the camera permission prompt).
This redirection worked just fine for handling the initial opening
of the QR scanner modal. But for any subsequent errors the same action
was used with a _default route_, meaning the user could click "try
again" and find themselves on a completely different screen.
Instead, errors now trigger a state change instead of closing and re-
opening the modal. The permission checks in the action have been
integrated into the component as well.
One functional change is that the scenario where you have an invalid
QR code has been made an error. Previously this just showed the error
message below the video preview, but left the user with no way to try
again. There error page has a "Try again" button, so it seemed better
suited as an error. Also the message literally started with "Error:".
Another functional change is that _all_ errors during initialization
will result in the error UI being shown. Previously there was one error
case that would instead log to the console and leave the user stuck.
* Use @metamask/eslint-config@1.1.0
* Use eslint-plugin-mocha@6.2.2
* Mark root ESLint config as root
* Update Mocha ESLint rules with shared ESLint config
* Various component tests and some conditional statements
Conditional in account-menu in removeAccount when keyring sometimes is not initially provideed
Conditional on unlock-page when there is no target.getBoundingClientRect on the element.
* Update helpers
* Remove component debugging
* Add default params for render helpers
* Remove stubComponent for old Mascot
Changes in https://github.com/MetaMask/metamask-extension/pull/7893 has prevented the need to stub it out.
Change logout to lock in account-menu test
The custom spend limit was previously not validated. It did have a
minimum of zero set, but this didn't have any affect (that minimum is
used for form constraint validation, and this field wasn't in a form).
The field was never checked to ensure the contents didn't exceed the
maximum.
The field is now checked for values that exceed the maximum, and
invalid values in general (including negative values).
The parameters to the `showEditApprovalPermissionModal` were also
alphabetized to make them easier to read. In the course of doing this,
I noticed that the origin was missing from one of the calls. This was
responsible for the modal saying "Spend limit requested by undefined"
when clicking "Edit" under the transaction details. This has been
fixed.
These two functions differ slightly in options, but none of those
options are being used by us, so in these cases they're functionally
equivalent. They're even both descendants of the original `debounce`
function from `underscore`.
This was done to reduce the number of direct dependencies we have. It
should not affect bundle size, as we still depend upon the `debounce`
package transitively.
In the case where the initial spend limit for the `approve` function
was set to the maximum amount, editing this value would result in the
new limit being silently ignored. The transaction would be submitted
with the original max spend limit.
This occurred because function to generate the new custom data would
look for the expected spend limit in the existing data, then bail if
it was not found (and in these cases, it was never found).
The reason the value was not found is that it was erroneously being
converted to a `Number`. A JavaScript `Number` is not precise enough to
represent larger spend limits, so it would give the wrong hex value
(after rounding had taken place in the conversion to a floating-point
number).
The data string is now updated without relying upon the original token
value; the new value is inserted after the `spender` argument instead,
as the remainder of the `data` string is guaranteed to be the original
limit. Additionally, the conversion to a `Number` is now omitted so
that the custom spend limit is encoded correctly.
Fixes#7915
After updating the custom spend limit on the approve screen, the data
for the transaction was not being updated. Instead it showed the
original transaction data. The transaction data was being updated
correctly in the final transaction though.
The approve screen has been updated to ensure changes to the custom
spend limit are reflected correctly in the data shown.
* Update lodash
All versions of the full `lodash` package have been updated to 4.17.15.
The only exception is v4.17.14 which is pinned by `ganache-core`.
* Switch to using `lodash` instead of per-method packages
We have the full lodash package _ten times_ as a production transitive
dependency, so including per-method packages is not saving space (it
might instead result in slightly more space being used).
Any error caught during a React component render or lifecycle method
will now be caught by the top-level error boundary, which shows the
user this new error page. The error page will display a simple error
message, and will show the details of the error in a collapsible
section.
The caught error is also reported to Sentry.
In development the error will be re-thrown to make it easier to see on
the console, but it is not re-thrown in production.
* Remove unnecessary `getEnvironmentType` parameter
The default value of the first parameter is `window.location.href`, so
there is no need to pass it in explicitly.
* Remove junk parameter from `getEnvironmentType` invocation
`getEnvironmentType` doesn't need to be passed any parameter, as the
default value is `window.location.href` which is generally what is
wanted. In this case, the variable `location.href` was always
`undefined` anyway. This particular `location` variable is from React
Router, and does not have an `href` property.
* Fix comment for `getEnvironmentType`
One of the possible return values was referred to by the wrong name.
`withRouter` has been removed from any components that were not using
any of the three props injected by `withRouter`: `history`, `location`,
and `match`.
`compose` is a no-op when called upon a single component, so it has
been removed in all such cases.
The filename is seeded by a simple use of Math.random() pulling from an alphanumeric character bank, as opposed to a more cryptographically random solution. This provides a simple layer of difficulty for bad actors to seek out the recovery phrase file.
The 'can retype the seed phrase' test would fail sometimes when one of
the words in the seed phrase was a subset of another word (e.g. 'issue'
and 'tissue'). This is because the selector used to find the word
looked for the first element that contained the text, rather than an
exact match.
To simplify the selector and make it more reliable, test ids were added
to each seed phrase word. The selector now uses CSS instead of XPath,
and it only finds exact matches.
A test id was also added to the div containing the shuffled seed words
to select from, so that the chosen seed words wouldn't be selected
in place of the real target when the same word appears twice.
The `confirm-seed-phrase` component extends PureComponent, so it
doesn't need a `shouldComponentUpdate` function. The state is
effectively immutable, as all state is either a primitive type or is
updated with new instances rather than mutation.
Removing this function will silence a warning message printed to the
console during e2e tests (React doesn't want you to set this function
on `PureComponent`s).
Removing this function also exposed an unused piece of state, which has
also been removed.
The `withFixtures` helper will instantiate ganache, a web driver, and
a fixture server initialized with the given set of fixtures. It is
meant to facilitating writing small, isolated e2e tests.
The first example test has been added: simple-send. It ensures that the
user can send 1 ETH to another account.
These new e2e tests will run during the normal e2e test run.
Closes#6548
* Remove unused functions from `mapDispatchToProps`
The actions import was also updated to import only the two actions
used, rather than all actions.
* Remove unused container component
Well, technically it was the props injected by this container that were
unused. The container served no purpose, so the component it surrounded
is now used directly instead.
* Remove both unused `getCurrentViewContext` selectors
* Remove unused SHOW_CONFIG_PAGE action
* Remove checks for `currentView` with name `config`
Now that the SHOW_CONFIG_PAGE action has been removed, it's no longer
possible for `currentView.name` to be set to that value.
* Remove unused `wallet-view` container props
* Delete unused SHOW_SEND_PAGE and SHOW_ADD_TOKEN_PAGE actions
* Remove unused `account-menu.container` props
* Remove unused SHOW_INFO_PAGE action
* Remove unused SET_NEW_ACCOUNT_FORM action
These rows on the Advanced Settings page were being looked up in the
e2e tests by the order they appeared in. Instead they're now referenced
by data id, so that we can add new settings and re-arrange them without
breaking the e2e tests.
This component used to persist form contents to LocalStorage. This was
especially useful for the popup UI, as each time the mouse left the
popup, the UI was completely torn down and state was lost.
This component was only being referenced by one form, and it wasn't
even being used there (e.g. no fields were labelled appropriately to
be persisted).
This was a useful component, and it seems this feature was lost
somewhere in the past couple of years. It was tempting to re-instate it
rather than delete it, but I decided not to because I'd likely approach
the problem differently if we wanted to reinstate it again today (maybe
by using a React Hook, or storing the state in Redux and persisting a
subset of the Redux store instead).
These unused props weren't being caught by ESLint because this
component extended another, which I guess made it difficult for the
React plugin to determine what was unused.
The `componentWillUpdate` logic was moved into `componentDidUpdate` so
that it would be picked up by ESLint. Also it seemed like a sensible
place for it to go. Having three redundant gas updates as part of
the same lifecycle function seemed too far, so I ensured it's
only called once.
* Make gas estimate update on debounced token amount change, not just on blur after change
* Updated tests
* Ensure `updateGas` is bound early
Co-authored-by: Mark Stacey <markjstacey@gmail.com>
* Add `react/no-unused-prop-types` rule
All detected unused prop types have been removed. I have attempted to
ensure these props are no longer passed in either.
* Update handling of props to avoid false positive lint errors
These cases were detected by `react/no-unused-prop-types` as being
unused props, even though they were used. These minor adjustments
prevent them from being flagged as errors.
* Update unit tests
Many of these tests were just checking that specific props were passed
from containers or to a child component. These were deleted, as I can't
imagine how they'd be useful.
* Disable `react/no-unused-prop-types` in `componentWillReceiveProps
The rule `react/no-unused-prop-types` doesn't seem to be detecting
props used within `UNSAFE_componentWillReceiveProps`. The two cases
have been disabled temporarily until we can replace these unsafe
lifecycle functions.
* Use arrow property initializer functions
* Use pure components where applicable
* Add UNSAFE_ prefix for deprecated lifecycle hooks
* Add allow UNSAFE_
* Removed unused "Component"
* Replace boron with 'fade-modal'
* Upgrade react/no-deprecated to an error
* Paste react-tooltip-component source directly
* Use arrow functions to bind `this`
* Add UNSAFE_ prefix
* Update react-redux, react-router-dom
* Remove things from inlined 'fade-modal'
* Adjust mountWithRouter to get unit tests passing again
* Remove domkit
* Add Wrapper to render-helpers
* Upgrade @storybook/addon-knobs
The connect route now takes a route parameter: the permissions request
id. This id is set whenever the permissions connect screen is opened,
ensuring that that tab is for that specific request alone.
This makes handling of multiple permissions requests a bit more
intuitive. Previously whenever opening multiple permissions requests,
the first one would be shown on each successive tab, whereas you
would expect each tab to show the request that prompted the tab to
open. Users may now address permissions request in whichever order
they'd like to, rather than being forced to deal with them
chronologically.
The MetaMask logo was throwing an exception because the `history` prop
from React Router wasn't being passed in. However, even if it was
passed in, clicking on the logo wouldn't have done anything because the
home route redirects back to the permission connect page.
Instead the logo now isn't given an `onClick` handler. The
`MetaFoxLogo` component has been updated to only set `cursor: pointer`
if given an `onClick` handler.
* add PermissionsController
remove provider approval controller
integrate rpc-cap
create PermissionsController
move provider approval functionality to permissions controller
add permissions approval ui, settings page
add permissions activity and history
move some functionality to metamask-inpage-provider
rename siteMetadata -> domainMetadata
add accountsChange notification to inpage provider
move functionality to inpage provider
update inpage provider
Remove 'Connections' settings page (#7369)
add hooks for exposing accounts in settings
rename unused messages in non-English locales
Add external extension id to metadata (#7396)
update inpage provider, rpc-cap
add eth_requestAccounts handling to background
prevent notifying connections if extension is locked
update inpage provider
Fix lint errors
add migration
review fixes
transaction controller review updates
removed unused messages
* Login Per Site UI (#7368)
* LoginPerSite original UI changes to keep
* First commit
* Get necessary connected tab info for redirect and icon display for permissioned sites
* Fix up designs and add missing features
* Some lint fixes
* More lint fixes
* Ensures the tx controller + tx-state-manager orders transactions in the order they are received
* Code cleanup for LoginPerSite-ui
* Update e2e tests to use new connection flow
* Fix display of connect screen and app header after login when connect request present
* Update metamask-responsive-ui.spec for new item in accounts dropdown
* Fix approve container by replacing approvedOrigins with domainMetaData
* Adds test/e2e/permissions.spec.js
* Correctly handle cancellation of a permissions request
* Redirect to home after disconnecting all sites / cancelling all permissions
* Fix display of site icons in menu
* Fix height of permissions page container
* Remove unused locale messages
* Set default values for openExternalTabs and tabIdOrigins in account-menu.container
* More code cleanup for LoginPerSite-ui
* Use extensions api to close tab in permissions-connect
* Remove unnecessary change in domIsReady() in contentscript
* Remove unnecessary private function markers and class methods (for background tab info) in metamask-controller.
* Adds getOriginOfCurrentTab selector
* Adds IconWithFallback component and substitutes for appropriate cases
* Add and utilize font mixins
* Remove unused method in disconnect-all.container.js
* Simplify buttonSizeLarge code in page-container-footer.component.js
* Add and utilize getAccountsWithLabels selector
* Remove console.log in ui/app/store/actions.js
* Change last connected time format to yyyy-M-d
* Fix css associated with IconWithFallback change
* Ensure tracked openNonMetamaskTabsIDs are correctly set to inactive on tab changes
* Code cleanup for LoginPerSite-ui
* Use reusable function for modifying openNonMetamaskTabsIDs in background.js
* Enables automatic switching to connected account when connected domain is open
* Prevent exploit of tabIdOriginMap in background.js
* Remove unneeded code from contentscript.js
* Simplify current tab origin and window opener logic using remotePort listener tabs.queryTabs
* Design and styling fixes for LoginPerSite-ui
* Fix permissionHistory and permission logging for eth_requestAccounts and eth_accounts
* Front end changes to support display of lastConnected time in connected and permissions screens
* Fix lint errors
* Refactor structure of permissionsHistory
* Fix default values and object modifications for domain and permissionsHistory related data
* Fix connecting to new accounts from modal
* Replace retweet.svg with connect-white.svg
* Fix signature-request.spec
* Update metamask-inpage-provider version
* Fix permissions e2e tests
* Remove unneeded delay from test/e2e/signature-request.spec.js
* Add delay before attempting to retrieve network id in dapp in ethereum-on=.spec
* Use requestAccountTabIds strategy for determining tab id that opened a given window
* Improve default values for permissions requests
* Add some message descriptions to app/_locales/en/messages.json
* Code clean up in permission controller
* Stopped deep cloning object in mapObjectValues
* Bump metamask-inpage-provider version
* Add missing description in app/_locales/en/messages.json
* Return promises from queryTabs and switchToTab of extension.js
* Remove unused getAllPermissions function
* Use default props in icon-with-fallback.component.js
* Stop passing to permissions controller
* Delete no longer used clear-approved-origins modal code
* Remove duplicate imports in ui/app/components/app/index.scss
* Use URL instead of regex in getOriginFromUrl()
* Add runtime error checking to platform, promise based extension.tab methods
* Support permission requests from external extensions
* Improve font size and colour of the domain origin on the permission confirmation screen
* Add support for toggling permissions
* Ensure getRenderablePermissionsDomains only returns domains with exposedAccount caveat permissions
* Remove unused code from LoginPerSite-ui branch
* Ensure modal closes on Enter press for new-account-modal.component.js
* Lint fix
* fixup! Login Per Site UI (#7368)
* Some code cleanup for LoginPerSite
* Adds UX for connecting to dapps via the connected sites screen (#7593)
* Adds UX for connecting to dapps via the connected sites screen
* Use openMetaMaskTabIds from background.js to determine if current active tab is MetaMask
* Delete unused permissions controller methods
* Fixes two small bugs in the LoginPerSite ui (#7595)
* Restore `providerRequest` message translations (#7600)
This message was removed, but it was replaced with a very similar
message called `likeToConnect`. The only difference is that the new
message has "MetaMask" in it. Preserving these messages without
"MetaMask" is probably better than deleting them, so these messages
have all been restored and renamed to `likeToConnect`.
* Login per site no sitemetadata fix (#7610)
* Support connected sites for which we have no site metadata.
* Change property containing subtitle info often populated by origin to a more accurate of purpose name
* Lint fix
* Improve disconnection modal messages (#7612)
* Improve disconnectAccountModalDescription and disconnectAllModalDescription messages
* Update disconnectAccountModalDescription app/_locales/en/messages.json
Co-Authored-By: Mark Stacey <markjstacey@gmail.com>
* Improve disconnectAccount modal message clarity
* Adds cancel button to the account selection screen of the permissions request flow (#7613)
* Fix eth_accounts permission language & selectability (#7614)
* fix eth_accounts language & selectability
* fix MetaMask capitalization in all messages
* Close sidebar when opening connected sites (#7611)
The 'Connected Sites' button in the accounts details now closes the
sidebar, if it is open. This was accomplished by pulling the click
handler for that button up to the wallet view component, where another
button already followed a similar pattern of closing the sidebar.
It seemed confusing to me that one handler was in the `AccountsDetails`
container component, and one was handed down from above, so I added
PropTypes to the container component.
I'm not sure that the WalletView component is the best place for this
logic, but I've put it there for now to be consistent with the add
token button.
* Reject permissions request upon tab close (#7618)
Permissions requests are now rejected when the page is closed. This
only applies to the full-screen view, as that is the view permission
requests should be handled in. The case where the user deals with the
request through a different view is handled in #7617
* Handle tab update failure (#7619)
`extension.tabs.update` can sometimes fail if the user interacts with
the tabs directly around the same time. The redirect flow has been
updated to ensure that the permissions tab is still closed in that
case. The user is on their own to find the dapp tab again in that case.
* Login per site tab popup fixes (#7617)
* Handle redirect in response to state update in permissions-connect
* Ensure origin is available to permissions-connect subcomponents during redirect
* Hide app bar whenever on redirect route
* Improvements to handling of redirects in permissions-connect
* Ensure permission request id change handling only happens when page is not null
* Lint fix
* Decouple confirm transaction screen from the selected address (#7622)
* Avoid race condtion that could prevent contextual account switching (#7623)
There was a race condition in the logic responsible for switching the
selected account based upon the active tab. It was asynchronously
querying the active tab, then assuming it had been retrieved later.
The active tab info itself was already in the redux store in another
spot, one that is guaranteed to be set before the UI renders. The
race condition was avoided by deleting the duplicate state, and using
the other active tab state.
* Only redirect back to dapp if current tab is active (#7621)
The "redirect back to dapp" behaviour can be disruptive when the
permissions connect tab is not active. The purpose of the redirect was
to maintain context between the dapp and the permissions request, but
if the user has already moved to another tab, that no longer applies.
* Fix JSX style lint errors
* Remove unused state
* Add support for one-click onboarding
MetaMask now allows sites to register as onboarding the user, so that
the user is redirected back to the initiating site after onboarding.
This is accomplished through the use of the `metamask-onboarding`
library and the MetaMask forwarder.
At the end of onboarding, a 'snackbar'-stype component will explain to the
user they are about to be moved back to the originating dapp, and it will
show the origin of that dapp. This is intended to help prevent phishing
attempts, as it highlights that a redirect is taking place to an untrusted
third party.
If the onboarding initiator tab is closed when onboarding is finished,
the user is redirected to the onboarding originator as a fallback.
Closes#6161
* Add onboarding button to contract test dapp
The `contract-test` dapp (run with `yarn dapp`, used in e2e tests) now
uses a `Connect` button instead of connecting automatically. This
button also serves as an onboarding button when a MetaMask installation
is not detected.
* Add new static server for test dapp
The `static-server` library we were using for the `contract-test` dapp
didn't allow referencing files outside the server root. This should
have been possible to work around using symlinks, but there was a bug
that resulted in symlinks crashing the server.
Instead it has been replaced with a simple static file server that
will serve paths starting with `node_modules` from the project root.
This will be useful in testing the onboarding library without vendoring
it.
* Add `@metamask/onboarding` and `@metamask/forwarder`
Both libraries used to test onboarding are now included as dev
dependencies, to help with testing. A few convenience scripts
were added to help with this (`yarn forwarder` and `yarn dapp-forwarder`)
The component has been updated to split the container from the base
component, and all hyperscript has been replaced with JSX. ES6 imports
are used throughout as well.
The units for the amounts shown on the approve screen in the
transaction fee section were missing. It appears that they were present
in an early version of the approve screen (#7271) but they got lost
somewhere along the way.
* Add additional url verification
* Add commas
* Address PR feedback
* Use URL over URI
* Update key in other languages
* Add stateKey check
* Split validateUrl into two separate methods
* Remove unused variable
* Add isValidWhenAppended method
Maker has upgraded its Dai token to "Multi-Collateral Dai" (MCD) and requires
all users interacting with Dai migrate their tokens to the new version. Dai
now exclusively refers to Multi-Collateral Dai and what was previouly called
Dai is now Sai (Single Collateral Dai).
In this description, Sai refers to what was (prior to the 2019-11-18) known as Dai.
Dai is the _new_ token.
This changeset:
1. Only affects users who had non-zero Sai at the old contract address
2. Displays a persistent notification for users with Sai
3. Updates the token symbol for users already tracking the Sai token
4. Bumps our direct and indirect eth-contract-metadata dependencies
The notification copy:
> A message from Maker: The new Multi-Collateral Dai token has been released. Your old tokens are now called Sai. Please upgrade your Sai tokens to the new Dai.
The copy is from the Maker team.
* Use child components for multiple notifications component
The multiple notifications component has been updated to take its child
components as children rather than as a props array, so that the child
components are never executed in the case where they aren't needed.
* Fix threebox last updated proptype
* Redesign approve screen
* Add translations to approve screen components
* Show account in header of approve screen
* Use state prop bool for unlimited vs custom check in edit-approval-permission
* Set option to custom on input change in edit-approval-permission
* Allow setting of approval amount to unlimited in edit-approval-permission
* Fix height of confirm-approval popup
* Ensure decimals prop passted to confirm-approve.component is correct type
* Ensure first param passed to calcTokenValue in confirm-approve.util is the correct type
* Fix e2e test of permission editing
* Remove unused code from edit-approval-permission.container
* Omit MetaMask `extensionId` from site metadata
The site metadata was updated in #7218 to include the extension id of
the extension connecting to MetaMask. This was done to allow external
extensions to connect with MetaMask, so that we could show the id on
the provider approval screen.
Unbeknownst to me at the time, the extension id was being set for all
connections to MetaMask from dapps. The id was set to MetaMask's id,
because the connections are made through MetaMask's contentscript.
This has been updated to only set the id when accepting a connection
from a different extension.
* Fix `siteMetadata` property names
In #7218 a few things were added to the site metadata, so the provider
approval controller was middleware was updated to accept the site
metadata as an object rather than accepting each property as a separate
parameter. Unfortunately we failed to notice that the site name and
icon were named differently in the site metadata than they were in the
provider approval controller, so the names of those properties were
unintentionally changed in the controller state.
The provider approval controller has been updated to restore the
original property names of `siteTitle` and `siteIcon`. An unused prop
that was added to the provider approval page in #7218 has also been
removed.
On the signature request and transaction confirmation notification
pages, the closure of the notification UI implies that the request has
been rejected. However, this rejection is being submitted even when the
window is closed as a result of the user explicitly confirming or
rejecting. In practice, I suspect this has no effect because the
transaction, after being explicitly confirmed or rejected, has already
been moved out of a pending state. But just in case there is some
present or future edge case that might be affected, the `beforeunload`
handler is now removed once the user has explicitly made a choice.
This mistake was introduced recently in #7333
* Adds Wyre widget to the deposit modal.
* Move wyre widget code to vendor directory
* Get Wyre widget working without metamask connect/sign steps
* Code cleanup for wyre changes
* Change wyre widget to using prod environment
* Remove code allowing signing of wyre messages without confirmations
* Update wyre vendor code for wyre 2.0
* Remove unnecessary changes to provider approval constructor, triggerUI and openPopup
* Fix Wyre translation message
* Delete no longer used signature-request-modal
* Fix documentation of matches function in utils/util.js
* Code cleanup on wyre branch
* Remove front end code changes not needed to support wyre v2
* Refactoring signature-request out to a new component. Wip
* Styling polish and a better message display.
* Update signature request header to no longer use account dropdown mini
* Clean up code and styles
* Code cleanup for signature request redesign branch
* Fix signature request design for full screen
* Replace makenode with object.entries in signature-request-message.component.js
* Remove unused accounts prop from signature-request.component.js
* Use beforeunload instead of window.onbeforeunload in signature-request
* ENS Reverse Resolution support
* Save punycode for ENS domains with Unicode characters
* Update SenderToRecipient recipientEns tooltip
* Use cached results when reverse-resolving ENS names
* Display ENS names in tx activity log
* Cleanup beforeunload handler after transaction is resolved
The notification window was updated to reject transactions upon close
in #6340. A handler that rejects the transaction was added to
`window.onbeforeunload`, and it was cleared in `actions.js` if it was
confirmed or rejected.
However, the `onbeforeunload` handler remained uncleared if the
transaction was resolved in another window. This results in the
transaction being rejected when the notification window closes, even
long after the transaction is submitted and confirmed. This has been
the cause of many problems with the Firefox e2e tests.
Instead the `onbeforeunload` handler is cleared in the
`componentWillUnmount` lifecycle function, alongside where it's set in
the first place. This ensures that it's correctly unset regardless
of how the transaction was resolved, and it better matches user
expectations.
* Fix indentation and remove redundant export
The `run-all.sh` Bash script now uses consistent indentation, and is
consistent about only re-exporting the Ganache arguments when they
change.
* Ensure transactions are completed before checking balance
Various intermittent e2e test failures appear to be caused by React
re-rendering the transaction list during the test, as the transaction
goes from pending to confirmed. To avoid this race condition, the
transaction is now explicitly looked for in the confirmed transaction
list in each of the tests using this pattern.
* Enable all e2e tests on Firefox
The remaining tests that were disabled on Firefox now work correctly.
Only a few timing adjustments were needed.
* Update Firefox used in CI
Firefox v70 is now used on CI instead of v68. This necessitated
rewriting the function where the extension ID was obtained because the
Firefox extensions page was redesigned.
If the extension ID is set, an alternate title and subtitle are used
for the Connect Request screen. The title is always `External
Extension`, and the subtitle is `Extension ID: [id]` instead of the
origin (which would just be `[extension-scheme]://[id]` anyway).
The hostname for the site is used as a fallback in case it has no
title.
The artificial hostname set for internal connections has been renamed
from 'MetaMask' to 'metamask' because URL objects automatically
normalize hostnames to be all lower-case, and it was more convenient to
use a URL object so that the parameter would be the same type as used
for an untrusted connection.
* Start refactor
* Use import syntax
* Add create-account.component
* Continue refactor
* Add new line
* Start using JSX and make tabs a bit more DRY
* 👋 bye-bye hyperscript
* These can be disabled when active
* Start JSX in new account component
* 👋 bye-bye hyperscript
* Move newAccountNumber into container
* Validate newAccountNumber prop
* Begin mocking out retry ui
* Remove "Failed"
* I guess this works?
* Update corresponding test
* wip
* Ok, this appears to be working now
* cleanup
* Move this back to 3
* I don't think I need this
* Rename showRetry to showSpeedUp
* Address PR feedback
* Remove notes
* Rename shouldShowRetry -> shouldShowSpeedUp
* oops
* Use `AdvancedGasInputs` in `AdvancedTabContent`
The `AdvancedGasInputs` component was originally extracted from the
`AdvancedTabContent` component, duplicating much of the rendering
logic. They have since evolved separately, with bugs being fixed in one
place but not the other.
The inputs and outputs expected weren't exactly the same, as the
`AdvancedGasInputs` component converts the input custom gas price and
limit, and it converts them both in the setter methods as well.
The `GasModalPageContainer` had to be adjusted to avoid converting
these values multiple times.
Both components dealt with input debouncing separately, both in less
than ideal ways. `AdvancedTabContent` didn't debounce either field, but
it did debounce the check for whether the gas limit field was below the
minimum value. So if a less-than-minimum value was set, it would be
propogated upwards and could be saved if the user clicked 'Save'
quickly enough. After a second delay it would snap back to the minimum
value. The `AdvancedGasInputs` component debounced both fields, but
it would replace any gas limit below the minimum with the minimum
value. This led to a problem where a brief pause during typing would
reset the field to 21000.
The `AdvancedGasInputs` approach was chosen, except that it was
updated to no longer change the gas limit if it was below the minimum.
Instead it displays an error. Parent components were checked to ensure
they would detect the error case of the gas limit being set too low,
and prevent the form submission in those cases. Of the three parents,
one had already dealt with it correctly, one needed to convert the
gas limit from hex first, and another needed the gas limit check added.
Closes#6872
* Cleanup send components
Empty README files have been removed, and a mistake in the index file
for the send page has been corrected. The Gas Slider component class
name was updated as well; it looks like it was originally created from
`AdvancedTabContent`, so it still had that class name.
* Ensure correct transaction category when sending to contracts but there is no txParams data
* Update gas when pasting address in send
* Gracefully fall back is send.util/estimateGas when blockGasLimit from background is falsy
* Remove network request frontend fallback for blockGasLimit
* Add some needed slow downs to e2e tests
The placeholder for the custom nonce needed to be converted into a
string. The placeholder is omitted if `nextNonce` isn't set, as may be
the case for the initial render.
* Allow default nextNonce to be the custom nonce in cases where highest locally pending is higher than nextNonce
* Reset custom nonce in cases of transaction submission failures
* Make the recommended nonce in the custom nonce field the true 'nextNonce'
* Revert automatic setting of custom nonce to nextNonce
* Make the nextNonce the default placeholder value
* Fix getNextNonce
* Remove unused nonceFieldPlaceholder message
* Fix nits in getPendingNonce and getNextNonce
* Properly handle errors in getNextNonce
* Improve placeholder and value defaults in custom nonce field
* Remove custom error message from getNextNonce
* Add UseNonce toggle
* Get the toggle actually working and dispatching
* Display nonce field on confirmation page
* Remove console.log
* Add placeholder
* Set customNonceValue
* Add nonce key/value to txParams
* remove customNonceValue from component state
* Use translation file and existing CSS class
* Use existing TextField component
* Remove console.log
* Fix lint nits
* Okay this sorta works?
* Move nonce toggle to advanced tab
* Set min to 0
* Wrap value in Number()
* Add customNonceMap
* Update custom nonce translation
* Update styles
* Reset CustomNonce
* Fix lint
* Get tests passing
* Add customNonceValue to defaults
* Fix test
* Fix comments
* Update tests
* Use camel case
* Ensure custom nonce can only be whole number
* Correct font size for custom nonce input
* UX improvements for custom nonce feature
* Fix advanced-tab-component tests for custom nonce changes
* Update title of nonce toggle in settings
* Remove unused locale message
* Cast custom nonce to string in confirm-transaction-base.component
* Handle string conversion and invalid values for custom nonces in handler
* Don't call getNonceLock in tx controller if there is a custom nonce
* Set nonce details for cases where nonce is customized
* Fix incorrectly use value for deciding whether to getnoncelock in approveTransaction
* Default nonceLock to empty object in approveTransaction
* Reapply use on nonceLock in cases where customNonceValue in approveTransaction.
* Show warning message if custom nonce is higher than MetaMask's next nonce
* Fix e2e test failure caused by custom nonce and 3box toggle conflict
* Update nonce warning message to include the suggested nonce
* Handle nextNonce comparison and update logic in lifecycle
* Default nonce field to suggested nonce
* Clear custom nonce on reject or confirm
* Fix bug where nonces are not shown in tx list on self sent transactions
* Ensure custom nonce is reset after tx is created in background
* Convert customNonceValue to number in approve tranasction controller
* Lint fix
* Call getNextNonce after updating custom nonce
* Delete unused code
* Run threebox imports through migrations
* Remove 3box feature flag
* Remove unnecessary use of 'type' in threebox._updatePlugin
* Fix threebox controller getLastUpdated
* Turn off threebox by default
* Rename restoredFromThreeBox to showRestorePrompt
* Remove accientally added method from threebox controller
* Restore from threebox on import from unlock screen
* Throw on non 404 errors from Box.getconfig in new3Box
* Adds ab test controller with a fullScreenVsPopup test
* Add migration for fullScreenVsPopup state
* Move abtest state under an 'abtests' object.
* MetaMask shows fullScreen group of a/b test unapproved txs in a full browser tab
* Ensure cancel metrics event in confirm-transaction-base.component.js is sent in all cases
* Switch to existing tab for unapproved tx if it exists when opening in full screen
* Send metrics event for entering a/b test from confirm screen
* Fix lint, unit and integration tests related to a/b test code
* Remove unnecessary tabs.query call in triggerUiInNewTab
* Switch to using string literals for locale keys
Various message keys were being specified with a string template
instead of a string literal. They have been switched to use string
literals so that the script for detecting unused messages can find
them.
* Remove unused locale messages
A number of unused locale messages have been removed - probably
leftover from old UI elements that have since been removed.
The `verify_locale_strings` script has been augmented to search the UI
for string literals, and match those against the locale message keys in
the `en` locale. Any messages without a corresponding string literal
are assumed to be unused.
The script has also been updated with an optional `--fix` parameter,
which will automatically delete any unused messages from locales.
148 unused messages were found in this case, out of a total of about
650 messages. Another 70 messages are _potentially_ unused and require
further investigation, but weren't as easy to rule out because they
were found in string literals.
* Remove additional unused locale messages
The following messages were more difficult to rule out because they
were present as string literals in the UI. They do appear to be
unused as locale keys though.
* Remove unused sendWarnings
The send warnings state and associated component is no longer used
anywhere.
* Remove unused subtitleParams
The `subtitleParams` SendHeader prop was being ignored. It has been
removed, along with associated selectors and tests.
* Adds threebox controller
* Adds threebox approval modal
* Fix unit tests and lint after addition of threebox
* Correct threebox behaviour after rejecting request for backup; fixes e2e tests.
* Update threebox controller for automatic syncing
* Ensure frontend locale updates when preferences are changed via direct update within controller
* Add toggle in settings for 3box syncing
* Update threebox controller for latest 3box version
* Delete unnecessary frontend changes for threebox integration
* Backing up address book contacts with threebox
* Update unit tests for 3box-integration additions
* Only enable threebox by default for new wallets
* Mock globals for correct unit tests
* 3box '1.10.2' -> '^1.10.2'
* Correct capilalization on 3Box
* Use log.debug instead of console.log in threebox controller
* Update yarn.lock
* Remove edge build
* Split 3box module into background deps js file
* extra bundle opts for bg-libs
* sync yarn.lock
* new3Box logic
* Show confirm threebox restore after import
* Remove bg-libs.js from manifest file for dev builds
* Switch 3Box controller to using the spaces api (instead of the profile api)
* Finalize switching to spaces api and only restoring from 3box after import
* Update metamask-controller-test.js for threebox controller changes
* Make threebox modal style consistent with others and update success button wording
* Use mock 3box when in test
* Correct 3box modal header
* Remove unnecessary property of threebox controller provider
* Remove unnecessary method calls after restoration from 3box in the threebox-restore-confirm modal.
* Replace setThreeBoxSyncingPermission calls in routes/index.js with turnThreeBoxSyncingOn
* Replace erroneous use of with
* Replace erroneous use of threeboxSyncing with threeBoxSyncingAllowed in advancted-tab directory
* Lint fixes for 3box changes
* Log errors encountered when updating 3Box
* Remove unnecessary parameter from state update
* Add timeout to initial 3Box sync
The initial 3Box sync will now timeout after 1 minute. If the timeout
is triggered, 3Box is disabled and cannot be re-enabled unless the
initial sync does finally finish. If it never finishes, 3Box cannot
be enabled unless the extension is reinstalled.
The Advanced Settings page was updated to show this option as disabled
in that circumstance, with a new discription explaining why it's
disabled. The UI here could certainly be improved.
Additionally, "on" and "off" labels were added to the toggle to match
the other toggles on the Advanced Settings page.
* Use non-minified 3Box module
We had previously used the minified 3Box module to avoid a build error
encountered when `envify` was processing the `libp2p` module (which is
used by 3Box). The build would fail because `esprima` (used by `envify`)
is incompatible with the object spread/rest operator (which is used in
`libp2p`).
That issue has been solved by adding a global Babelify transformation
specifically for transpiling out the object rest/spread operator from
dependencies. It has been targetted to only affect `libp2p` to avoid
extending the build time too much. This workaround can be used until
a new version of `esprima` is released that includes this bug fix.
* Use app key addresses for threebox
* Replace use of modal for confirming 3box restoration with a home notification
* Adds e2e tests for restoring from threebox
* Update eth-keyring-controller to 5.1.0
* Correct parameters passed to getAppKeyAddress in threebox.js
* Add prefix to origin passed to getAppKeyAddress in threebox.js
* Remove unused locale message.
* Prevent CORS errors in firefox e2e tests
* Ensure extraneous scripts are excluded from the local test dev build
* Move threeBoxLastUpdate state from home.component to redux
* Threebox PR code cleanup
* Always use first address when initializing threebox
* Replace setRestoredFromThreeBox api with setRestoredFromThreeBoxToFalse and setRestoredFromThreeBoxToTrue
* Update development/metamaskbot-build-announce.js to include ui-libs and bg-libs in hard coded bundle list
* Update test/e2e/threebox.spec.js to use new helpers added with pull #7144
* Make setFeatureFlag available on the ui window during testing
* Hide threebox feature behind a feature flag that can only be activated via dev console
* Remove unnecessary migration of threebox feature flag
* Prevent this.init() call in threebox constructor if feature flag is not turned on
* Prevent threebox notification from showing if feature flag is falsy
* http://localhost/8889 -> http://localhost/* in gulp manifest:testing tasks
* Create RTL stylesheets using `gulp-rtl`
* Handle RTL stylesheet special cases
Certain blocks of Sass were set to bypass "rtlcss" using ignore
comments. Certain icons had to be flipped 180 degrees.
* Switch stylesheets when locale changes
A second stylesheet has been added to each HTML page for use with
right-to-left locales. It is disabled by default. It is enabled on
startup if a RTL locale is set, and when switching to a RTL locale.
Similarly the LTR stylesheet is disabled when a RTL locale is used.
Unfortunately there is an unpleasant flash of unstyled content when
switching between a LTR and a RTL locale. There is also a slightly
longer page load time when using a RTL locale (<1s difference). We
couldn't think of an easy way to avoid these problems.
* Set `dir="auto"` as default on `TextFields`
The privacy mode notification was not able to be dismissed from the
popup UI. It should have been dismissed after clicking "Learn more",
but that button opens a new tab first before dismissing the flag.
Opening the new tab kills the pop UI process before it has a chance
to set that flag, so it never gets set.
Re-ordering the handler to set the flag first avoids this problem.
In the case where the block gas limit in the MetaMask state is blank,
an exception is sometimes thrown when that blank value is passed to
`multiplyCurrencies` to be parsed as a hex number.
Instead the minimum gas limit is now used instead whenever the block
gas limit is falsy. This was already being done in one case anyway.
The token amount displayed when confirming a token transaction was
wrongly being converted to a string in the container. As a result, the
conversion into the user's preferred currency would fail.
A default value of '0' was added for the token amount as well, to
prevent `undefined` from being rendered as the value. Really the value
should never be undefined, but it was rather difficult to handle that
case without a deeper investigation into how it might occur. The 0
default is consistent with existing rendering logic.
