The fullscreen UI now shows roughly the same design as the popup UI.
A few additional changes depicted in the new fullscreen designs will
be implemented in subsequent PRs (e.g. the inline buttons on assets)
This was done now to make asset pages easier to implement. Implementing
asset pages solely for the popup UI would have been complicated by the
fact that we use viewport size to switch between the two layouts, so we
would have had to re-route upon resizing the window.
The `AccountDetailsDropdown` component has been rewritten to use the
new `Menu` component, and to follow the latest designs.
This should be functionally equivalent. A couple of the icons have
changed, but that's about it.
Support for a subtitle was added to `MenuItem` to support the `origin`
subtitle used for the explorer link for custom RPC endpoints.
A few adjustments were required to `test/helper.js` to accommodate
the use of `Menu` from a JSDOM context (this is the first time it's
been used in a unit test). A `popover-content` element was added to the
fake DOM, and another global was added that `react-popper` used
internally.
An additional driver method (`clickPoint`) was added to the e2e driver
to allow clicking the background behind the menu to dismiss it. This
wasn't possible using the `clickElement` method, because that method
would refuse to click an obscured element. The only non-obscured
element to click was the menu backdrop, and that didn't work either
because the center was obscured by the menu (Selenium clicks the center
of whichever element is targeted).
The `.scss` file extension is not required when importing SCSS files.
It has been removed from all imports, for consistency. I chose to
remove it rather than add it everywhere because imports without the
extension seem to be more common.
The `shift-list-item` component for displaying ShapeShift transactions
has been removed, along with three other components that were used
solely by that component (`copyButton`, `eth-balance`, and
`fiat-value`).
This component hasn't been used in some time, as ShapeShift
transactions no longer exist to display. The controller that ShapeShift
transactions originated from was removed in #8118, and it became
impossible to create new ShapeShift transactions from within MetaMask
in #6746
The popup view would expand beyond the width of the viewport when
expanding a transaction. This bug was introduced in #8139 when I
removed the `min-width: 0` property from the `home__container` class;
this property was giving the parent permission to shrink that div below
the size of its content.
Instead of restoring that property, the parent component is no longer
using `display: flex`. Flexbox was never useful here, as this is just a
wrapper div around a wrapper div, both with identical sizes. The
default display type of `block` produces the desired behaviour with
less rules.
The pieces that we'll be referring to as the "Asset List" in the near
future have been extracted from WalletView into a separate AssetList
component. This list includes ETH, the tokens, and the 'Add Token'
button.
The styles were moved alongside this new component as well.
The styles for the TokenCell component have been moved to be alongside
the component. They have also been renamed from `token-list-item` to
match the component name.
* Add minimal working popover
* Fix styling of popover component
* Use lorem ipsum
* Update classnames and remove unrelated styles
* Remove unused components
* Add SVG close icon
* Add Close icon to icon stories
* Use div
* Use `addon-actions`
* Use `<button>` for close
* Fix button wobble in Firefox
* Remove border
* Add tx list-item component
New list item compoent for transaction history
* Simplify component logic and remove type checks
* Address remaining feedback
* Remove extra line
* Place className prop on its own line
* Rename to primaryCurrency and secondaryCurrency
* Make the title `isRequired`
* Fix no-undef
* Remove more + buttons to be implemented in seperate PR
* Add minimal store and I18nProvider to storybook
* Use Component to support translations
* Add `metamask` to store
* Rename decorator
The styles used for the Home component were in the huge
"newui-sections" SCSS file. Instead they've been moved into an SCSS
module alongside the component, to follow our conventions.
The `main-container` class was left as-is because it is shared between
here and the settings page.
Implement `eth_decrypt` and `eth_getEncryptionPublicKey`. This allows decryption backed by the user's private key. The message decryption uses a confirmation flow similar to the messaging signing flow, where the message to be decrypted is also able to be decrypted inline for the user to read directly before confirming.
The account details close button is difficult to click from the e2e
tests because it has a size of zero. The actual icon is added via CSS
as an `::after` pseudo-element.
The CSS has been adjusted to give the icon a size, and it the markup
is now a `button` rather than a `div`.
* Use arrow property initializer functions
* Use pure components where applicable
* Add UNSAFE_ prefix for deprecated lifecycle hooks
* Add allow UNSAFE_
* Removed unused "Component"
* Replace boron with 'fade-modal'
* Upgrade react/no-deprecated to an error
* Paste react-tooltip-component source directly
* Use arrow functions to bind `this`
* Add UNSAFE_ prefix
* Update react-redux, react-router-dom
* Remove things from inlined 'fade-modal'
* Adjust mountWithRouter to get unit tests passing again
* Remove domkit
* Add Wrapper to render-helpers
* Upgrade @storybook/addon-knobs
* add PermissionsController
remove provider approval controller
integrate rpc-cap
create PermissionsController
move provider approval functionality to permissions controller
add permissions approval ui, settings page
add permissions activity and history
move some functionality to metamask-inpage-provider
rename siteMetadata -> domainMetadata
add accountsChange notification to inpage provider
move functionality to inpage provider
update inpage provider
Remove 'Connections' settings page (#7369)
add hooks for exposing accounts in settings
rename unused messages in non-English locales
Add external extension id to metadata (#7396)
update inpage provider, rpc-cap
add eth_requestAccounts handling to background
prevent notifying connections if extension is locked
update inpage provider
Fix lint errors
add migration
review fixes
transaction controller review updates
removed unused messages
* Login Per Site UI (#7368)
* LoginPerSite original UI changes to keep
* First commit
* Get necessary connected tab info for redirect and icon display for permissioned sites
* Fix up designs and add missing features
* Some lint fixes
* More lint fixes
* Ensures the tx controller + tx-state-manager orders transactions in the order they are received
* Code cleanup for LoginPerSite-ui
* Update e2e tests to use new connection flow
* Fix display of connect screen and app header after login when connect request present
* Update metamask-responsive-ui.spec for new item in accounts dropdown
* Fix approve container by replacing approvedOrigins with domainMetaData
* Adds test/e2e/permissions.spec.js
* Correctly handle cancellation of a permissions request
* Redirect to home after disconnecting all sites / cancelling all permissions
* Fix display of site icons in menu
* Fix height of permissions page container
* Remove unused locale messages
* Set default values for openExternalTabs and tabIdOrigins in account-menu.container
* More code cleanup for LoginPerSite-ui
* Use extensions api to close tab in permissions-connect
* Remove unnecessary change in domIsReady() in contentscript
* Remove unnecessary private function markers and class methods (for background tab info) in metamask-controller.
* Adds getOriginOfCurrentTab selector
* Adds IconWithFallback component and substitutes for appropriate cases
* Add and utilize font mixins
* Remove unused method in disconnect-all.container.js
* Simplify buttonSizeLarge code in page-container-footer.component.js
* Add and utilize getAccountsWithLabels selector
* Remove console.log in ui/app/store/actions.js
* Change last connected time format to yyyy-M-d
* Fix css associated with IconWithFallback change
* Ensure tracked openNonMetamaskTabsIDs are correctly set to inactive on tab changes
* Code cleanup for LoginPerSite-ui
* Use reusable function for modifying openNonMetamaskTabsIDs in background.js
* Enables automatic switching to connected account when connected domain is open
* Prevent exploit of tabIdOriginMap in background.js
* Remove unneeded code from contentscript.js
* Simplify current tab origin and window opener logic using remotePort listener tabs.queryTabs
* Design and styling fixes for LoginPerSite-ui
* Fix permissionHistory and permission logging for eth_requestAccounts and eth_accounts
* Front end changes to support display of lastConnected time in connected and permissions screens
* Fix lint errors
* Refactor structure of permissionsHistory
* Fix default values and object modifications for domain and permissionsHistory related data
* Fix connecting to new accounts from modal
* Replace retweet.svg with connect-white.svg
* Fix signature-request.spec
* Update metamask-inpage-provider version
* Fix permissions e2e tests
* Remove unneeded delay from test/e2e/signature-request.spec.js
* Add delay before attempting to retrieve network id in dapp in ethereum-on=.spec
* Use requestAccountTabIds strategy for determining tab id that opened a given window
* Improve default values for permissions requests
* Add some message descriptions to app/_locales/en/messages.json
* Code clean up in permission controller
* Stopped deep cloning object in mapObjectValues
* Bump metamask-inpage-provider version
* Add missing description in app/_locales/en/messages.json
* Return promises from queryTabs and switchToTab of extension.js
* Remove unused getAllPermissions function
* Use default props in icon-with-fallback.component.js
* Stop passing to permissions controller
* Delete no longer used clear-approved-origins modal code
* Remove duplicate imports in ui/app/components/app/index.scss
* Use URL instead of regex in getOriginFromUrl()
* Add runtime error checking to platform, promise based extension.tab methods
* Support permission requests from external extensions
* Improve font size and colour of the domain origin on the permission confirmation screen
* Add support for toggling permissions
* Ensure getRenderablePermissionsDomains only returns domains with exposedAccount caveat permissions
* Remove unused code from LoginPerSite-ui branch
* Ensure modal closes on Enter press for new-account-modal.component.js
* Lint fix
* fixup! Login Per Site UI (#7368)
* Some code cleanup for LoginPerSite
* Adds UX for connecting to dapps via the connected sites screen (#7593)
* Adds UX for connecting to dapps via the connected sites screen
* Use openMetaMaskTabIds from background.js to determine if current active tab is MetaMask
* Delete unused permissions controller methods
* Fixes two small bugs in the LoginPerSite ui (#7595)
* Restore `providerRequest` message translations (#7600)
This message was removed, but it was replaced with a very similar
message called `likeToConnect`. The only difference is that the new
message has "MetaMask" in it. Preserving these messages without
"MetaMask" is probably better than deleting them, so these messages
have all been restored and renamed to `likeToConnect`.
* Login per site no sitemetadata fix (#7610)
* Support connected sites for which we have no site metadata.
* Change property containing subtitle info often populated by origin to a more accurate of purpose name
* Lint fix
* Improve disconnection modal messages (#7612)
* Improve disconnectAccountModalDescription and disconnectAllModalDescription messages
* Update disconnectAccountModalDescription app/_locales/en/messages.json
Co-Authored-By: Mark Stacey <markjstacey@gmail.com>
* Improve disconnectAccount modal message clarity
* Adds cancel button to the account selection screen of the permissions request flow (#7613)
* Fix eth_accounts permission language & selectability (#7614)
* fix eth_accounts language & selectability
* fix MetaMask capitalization in all messages
* Close sidebar when opening connected sites (#7611)
The 'Connected Sites' button in the accounts details now closes the
sidebar, if it is open. This was accomplished by pulling the click
handler for that button up to the wallet view component, where another
button already followed a similar pattern of closing the sidebar.
It seemed confusing to me that one handler was in the `AccountsDetails`
container component, and one was handed down from above, so I added
PropTypes to the container component.
I'm not sure that the WalletView component is the best place for this
logic, but I've put it there for now to be consistent with the add
token button.
* Reject permissions request upon tab close (#7618)
Permissions requests are now rejected when the page is closed. This
only applies to the full-screen view, as that is the view permission
requests should be handled in. The case where the user deals with the
request through a different view is handled in #7617
* Handle tab update failure (#7619)
`extension.tabs.update` can sometimes fail if the user interacts with
the tabs directly around the same time. The redirect flow has been
updated to ensure that the permissions tab is still closed in that
case. The user is on their own to find the dapp tab again in that case.
* Login per site tab popup fixes (#7617)
* Handle redirect in response to state update in permissions-connect
* Ensure origin is available to permissions-connect subcomponents during redirect
* Hide app bar whenever on redirect route
* Improvements to handling of redirects in permissions-connect
* Ensure permission request id change handling only happens when page is not null
* Lint fix
* Decouple confirm transaction screen from the selected address (#7622)
* Avoid race condtion that could prevent contextual account switching (#7623)
There was a race condition in the logic responsible for switching the
selected account based upon the active tab. It was asynchronously
querying the active tab, then assuming it had been retrieved later.
The active tab info itself was already in the redux store in another
spot, one that is guaranteed to be set before the UI renders. The
race condition was avoided by deleting the duplicate state, and using
the other active tab state.
* Only redirect back to dapp if current tab is active (#7621)
The "redirect back to dapp" behaviour can be disruptive when the
permissions connect tab is not active. The purpose of the redirect was
to maintain context between the dapp and the permissions request, but
if the user has already moved to another tab, that no longer applies.
* Fix JSX style lint errors
* Remove unused state
* Add support for one-click onboarding
MetaMask now allows sites to register as onboarding the user, so that
the user is redirected back to the initiating site after onboarding.
This is accomplished through the use of the `metamask-onboarding`
library and the MetaMask forwarder.
At the end of onboarding, a 'snackbar'-stype component will explain to the
user they are about to be moved back to the originating dapp, and it will
show the origin of that dapp. This is intended to help prevent phishing
attempts, as it highlights that a redirect is taking place to an untrusted
third party.
If the onboarding initiator tab is closed when onboarding is finished,
the user is redirected to the onboarding originator as a fallback.
Closes#6161
* Add onboarding button to contract test dapp
The `contract-test` dapp (run with `yarn dapp`, used in e2e tests) now
uses a `Connect` button instead of connecting automatically. This
button also serves as an onboarding button when a MetaMask installation
is not detected.
* Add new static server for test dapp
The `static-server` library we were using for the `contract-test` dapp
didn't allow referencing files outside the server root. This should
have been possible to work around using symlinks, but there was a bug
that resulted in symlinks crashing the server.
Instead it has been replaced with a simple static file server that
will serve paths starting with `node_modules` from the project root.
This will be useful in testing the onboarding library without vendoring
it.
* Add `@metamask/onboarding` and `@metamask/forwarder`
Both libraries used to test onboarding are now included as dev
dependencies, to help with testing. A few convenience scripts
were added to help with this (`yarn forwarder` and `yarn dapp-forwarder`)
* Start refactor
* Use import syntax
* Add create-account.component
* Continue refactor
* Add new line
* Start using JSX and make tabs a bit more DRY
* 👋 bye-bye hyperscript
* These can be disabled when active
* Start JSX in new account component
* 👋 bye-bye hyperscript
* Move newAccountNumber into container
* Validate newAccountNumber prop
* Create RTL stylesheets using `gulp-rtl`
* Handle RTL stylesheet special cases
Certain blocks of Sass were set to bypass "rtlcss" using ignore
comments. Certain icons had to be flipped 180 degrees.
* Switch stylesheets when locale changes
A second stylesheet has been added to each HTML page for use with
right-to-left locales. It is disabled by default. It is enabled on
startup if a RTL locale is set, and when switching to a RTL locale.
Similarly the LTR stylesheet is disabled when a RTL locale is used.
Unfortunately there is an unpleasant flash of unstyled content when
switching between a LTR and a RTL locale. There is also a slightly
longer page load time when using a RTL locale (<1s difference). We
couldn't think of an easy way to avoid these problems.
* Set `dir="auto"` as default on `TextFields`
* Style Send Header
* Move Send to-row to send view and restyle
* Add "Recents" group to select recipient view
* Rename SendToRow to AddRecipient
* Basic UI and Layout
* New ENSInput component
* wip - fuzzy search for input
* small refactor
* Add Dialog
* contact list initial
* initial error on invalid address
* clean up edit
* Click to open modal
* Create AddToAddressBookModal component
* Modal styling and layout
* modal i18n
* Add to Addressbook
* ens wip
* ens wip
* ENS Resolution
* Reset input
* Send to explicit address
* Happy Path Complete
* Add back error checking
* Reset send-to when emptying input
* Add back warning object
* Fix linter
* Fix unit test #1 - fix import paths
* Remove dead tests
* One more to go
* Fix all unit tests
* add unit test for reducers and actions
* test rendering AddRecipient
* Add tests for dialog boxes in AddRecipient
* Add test for validating
* Fix linter
* Fix e2e tests
* Token send e2e fix
* Style View Contact
* Style edit-contact
* Fix e2e
* Fix from-import-beta-ui e2e spec
* Make section header say "add recipient” by default
* Auto-focus add recipient input
* Update placeholder text
* Update input title font size
* Auto advance to next step if user paste a valid address
* Ellipsify address when recipient is selected
* Fix app header background color on desktop
* Give each form row a margin of 16px
* Use .container/.component naming pattern for ens-input
* Auto-focus on input when add to addressbook modal is opened; Save on Enter
* Fix and add unit test
* Fix selectors name in e2e tests
* Correct e2e test token amount for address-book-send changes
* Adds e2e test for editing a transaction
* Delete test/integration/lib/send-new-ui.js
* Add tests for amount max button and high value error on send screen to test/e2e/metamask-ui.spec.js
* lint and revert to address as object keys
* add chainId based on current network to address book entry
* fix test
* only display contacts for the current network
* Improve ENS message when not found on current network
* Add error to indicate when network does not support ENS
* bump gaba
* address book, resolve comments
* Move contact-list to its own component
* De-duplicate getaddressbook selector and refactor name selection logic in contact-list-tab/
* Use contact-list component in contact-list-tab.component (i.e. in settings)
* Improve/fix settings headers for popup and browser views
* Lint fixes related to address book updates
* Add 'My accounts' page to settings address book
* Update add new contact button in settings to match floating circular design
* Improve styles of view contact page
* Improve styles and labels of the add-contact.component
* Further lint fixes related to address book updates
* Update unit tests as per address book updates
* Ensure that contact list groups are sorted alphabetically
* Refactor settings component to use a container for connection to redux; allow display of addressbook name in settings header
* Decouple ens-input.component from send context
* Add ens resolution to add contact screen in settings
* Switching networks when an ens address is shown on send form removes the ens address.
* Resolve send screen search for ensAddress to matching address book entry if it exists
* Show resolved ens icon and address if exists (settings: add-contact.component)
* Make the displayed and copied address in view-contact.component the checksummed address
* Default alias state prop in AddToAddressBookModal to empty string
* Use keyCode to detect enter key in AddToAddressBookModal
* Ensure add-contact component properly updates after QR code detection
* Fix display of all recents after clicking 'Load More' in contact list
* Fix send screen contact searching after network switching
* Code cleanup related to address book changes
* Update unit tests for address book changes
* Update ENS name not found on network message
* Add ens registration error message
* Cancel on edit mode takes user back to view screen
* Adds support for memo to settings contact list view and edit screens
* Modify designs of edit and view contact in popup environment
* Update settings content list UX to show split columns in fullscreen and proper internal navigation
* Correct background address book API usages in UI
The `AccountDropdownMini` component featured the ability to switch
accounts using a dropdown, but this functionality was disabled in #6024.
It has been acting as a restyled `AccountListItem` since then.
The component has been removed, and the style changes moved to the sole
parent component (`RequestSignature`).
* Add loading spinner to pending tx status label.
* Add border around account icon in top right
* Change style of settings toggle buttons; wrap with local components
* Eliminate large space after settings labels when no description
* Remove network form from advanced tab of settings
* Keep new account container height to contents when in full screen
* Changed max button to checkbox, disabled input if max mode is on, recalculate price according to gas fee if max mode is on
* Disabled insufficient funds message in the modal if max mode is on, displays proper amounts in modal when max mode is on, sets the send amount according to custom gas price after gas modal save, resets the send amount after resetting custom gas price
* Disabled max mode checkbox if gas buttons are loading, refactored gas-modal-page-container
* Implemented new max button & max mode message. Moved insufficient funds error to underneath the send amount field
* Fixed existing integration test to pass, created new tests to ensure send amount field is disabled when max button is clicked and the amount changes when the gas price is changed. Refactored some components
* Move send to pages/
* Fix unit tests
* Finish UI
* Integrate asset dropdown to send actions
* Remove console.log
* Hide asset change during edit
* Enable switch from send token to seand eth
* Enable switching from token to eth when editing
* Fix linter
* Fixing test
* Fix unit tests
* Fix linter
* Fix react warning; remove console.log
* fix flat test
* Add metrics
* Address code review comments
* Consistent spacing between send screen form rows.
* Reduce height of gas buttons on send screen.
* Make send screen gas button height dependent on size of contents.
