* Add missing test descriptions
* Fix async tests that expect a rejection
These tests expected the function under test to return a rejected
promise, and had assertions to be run in the `catch` clause. However,
the tests would still pass if the function didn't reject, with
the assertions never being run.
The tests have been updated to fail if the function doesn't throw.
* Handle ignored promise rejection
In the case where `forceUpdateMetamaskState` rejects, the function
`setSeedPhraseBackedUp` would never resolve. It has been updated to
pass along the rejection instead.
* Return after rejecting promise in action
A few actions would continue after encountering an error, resulting in
errors being compounded. Instead all actions will now return after
encountering an error (which it looks like was the intention in these
cases anyway).
In the case where the block gas limit in the MetaMask state is blank,
an exception is sometimes thrown when that blank value is passed to
`multiplyCurrencies` to be parsed as a hex number.
Instead the minimum gas limit is now used instead whenever the block
gas limit is falsy. This was already being done in one case anyway.
The token amount displayed when confirming a token transaction was
wrongly being converted to a string in the container. As a result, the
conversion into the user's preferred currency would fail.
A default value of '0' was added for the token amount as well, to
prevent `undefined` from being rendered as the value. Really the value
should never be undefined, but it was rather difficult to handle that
case without a deeper investigation into how it might occur. The 0
default is consistent with existing rendering logic.
* Fix styling of `.transaction-list`
* Filter `incomingTxListSelector` by network as well
* Start and stop block tracker polling in incoming tx controller
* Add fetch with abort in bg for `IncomingTxController`
* Nix notification for Share Address
* Add Connections settings tab in place of privacy mode toggle
* Split ProviderApprovalController into two stores
* Remove privacyMode feature flag altogether
* Add migration to remove privacyMode feature flag
* Ensure address book send flow correctly matches address book addresses to ens addresses
* Use nodify on background.setAddressBook to receive correct result in actions.js
* Better error handling for actions.js addToAddressBook
* Eliminate unnecessary data normalization and move more data manipluation to ens-input and send-content containers
A hidden overlay was preventing interactions with the lower 356 pixels
in the popup view when there are zero notifications. It was also
preventing interactions with the 100 pixels above the notifications in
the case where there were two notifications, which obscured the `Send`
button.
The first problem was solved by ensuring the notification wrapper isn't
rendered when there are no notifications. The second problem was solved
by updating the notification wrapper style to avoid setting a height.
* Open backup challenge screen, prompted from notification, in browser window
* Remove no longer used showingSeedPhraseBackupAfterOnboarding related code
* Make incremental-security.spec.js click through the seed phrase success screen
* Fix address book name saving and ens input errors on good inputs on unsupported networks
* Add initial e2e test for address book send flow.
* No longer need to click recipient row in e2e tests
* Click write button in address book e2e test on seed confirm screen
* Use correct seed phrase and private key in address-book.spec tests
* Replace use of backup-notification with use of home notification
* Pin notifications relative to window
* Remove unneeded isRequired condition on some home.component properties
* Refactor rendering of home notifications
* UX for multiple notifications
* Adds dismissal to provider request notification.
* Fix test failures
The e2e tests have been updated to reference `home-notification`
classnames instead of the removed `background-notification`. The
active tab proptypes and default values were updated as well.
The notice asking whether you wanted to connect to a site was showing
up in places it shouldn't, like on the Firefox/Chrome settings pages
and on our fullscreen extension. It has now been restricted to only
be displayed for active tabs with specific protocols:
* http
* https
* dat
* dweb
* ipfs
* ipns
* ssb
This prevents the notice from being shown on settings pages, browser
extensions, and files such as PDFs.
The seed phrase reminder will now be triggered if the user has eth *OR*
if the user has added a token. This is to ensure that a user can't have
a positive token balance without being reminded to backup the account.
Checking for the token in preferences was easier than checking the
actual token balance, because the token balance is not yet in Redux.
That would require a more substantial refactor.
* Implements ability to defer seed phrase backup to later
* Adds incremental-security.spec.js, including test dapp that sends signed tx with stand alone localhost provider
* Update metamask-responsive-ui for incremental account security changes
* Update backup-notification style and fix responsiveness of seed phrase screen
* Remove uneeded files from send-eth-with-private-key-test/
* Apply linguist flags in .gitattributes for send-eth-with-private-key-test/ethereumjs-tx.js
* Improve docs in controllers/onboarding.js
* Clean up metamask-extension/test/e2e/send-eth-with-private-key-test/index.html
* Remove unnecessary newlines in a couple first-time-flow/ files
* Fix import of backup-notification in home.component
* Fix git attrs file
* Style Send Header
* Move Send to-row to send view and restyle
* Add "Recents" group to select recipient view
* Rename SendToRow to AddRecipient
* Basic UI and Layout
* New ENSInput component
* wip - fuzzy search for input
* small refactor
* Add Dialog
* contact list initial
* initial error on invalid address
* clean up edit
* Click to open modal
* Create AddToAddressBookModal component
* Modal styling and layout
* modal i18n
* Add to Addressbook
* ens wip
* ens wip
* ENS Resolution
* Reset input
* Send to explicit address
* Happy Path Complete
* Add back error checking
* Reset send-to when emptying input
* Add back warning object
* Fix linter
* Fix unit test #1 - fix import paths
* Remove dead tests
* One more to go
* Fix all unit tests
* add unit test for reducers and actions
* test rendering AddRecipient
* Add tests for dialog boxes in AddRecipient
* Add test for validating
* Fix linter
* Fix e2e tests
* Token send e2e fix
* Style View Contact
* Style edit-contact
* Fix e2e
* Fix from-import-beta-ui e2e spec
* Make section header say "add recipient” by default
* Auto-focus add recipient input
* Update placeholder text
* Update input title font size
* Auto advance to next step if user paste a valid address
* Ellipsify address when recipient is selected
* Fix app header background color on desktop
* Give each form row a margin of 16px
* Use .container/.component naming pattern for ens-input
* Auto-focus on input when add to addressbook modal is opened; Save on Enter
* Fix and add unit test
* Fix selectors name in e2e tests
* Correct e2e test token amount for address-book-send changes
* Adds e2e test for editing a transaction
* Delete test/integration/lib/send-new-ui.js
* Add tests for amount max button and high value error on send screen to test/e2e/metamask-ui.spec.js
* lint and revert to address as object keys
* add chainId based on current network to address book entry
* fix test
* only display contacts for the current network
* Improve ENS message when not found on current network
* Add error to indicate when network does not support ENS
* bump gaba
* address book, resolve comments
* Move contact-list to its own component
* De-duplicate getaddressbook selector and refactor name selection logic in contact-list-tab/
* Use contact-list component in contact-list-tab.component (i.e. in settings)
* Improve/fix settings headers for popup and browser views
* Lint fixes related to address book updates
* Add 'My accounts' page to settings address book
* Update add new contact button in settings to match floating circular design
* Improve styles of view contact page
* Improve styles and labels of the add-contact.component
* Further lint fixes related to address book updates
* Update unit tests as per address book updates
* Ensure that contact list groups are sorted alphabetically
* Refactor settings component to use a container for connection to redux; allow display of addressbook name in settings header
* Decouple ens-input.component from send context
* Add ens resolution to add contact screen in settings
* Switching networks when an ens address is shown on send form removes the ens address.
* Resolve send screen search for ensAddress to matching address book entry if it exists
* Show resolved ens icon and address if exists (settings: add-contact.component)
* Make the displayed and copied address in view-contact.component the checksummed address
* Default alias state prop in AddToAddressBookModal to empty string
* Use keyCode to detect enter key in AddToAddressBookModal
* Ensure add-contact component properly updates after QR code detection
* Fix display of all recents after clicking 'Load More' in contact list
* Fix send screen contact searching after network switching
* Code cleanup related to address book changes
* Update unit tests for address book changes
* Update ENS name not found on network message
* Add ens registration error message
* Cancel on edit mode takes user back to view screen
* Adds support for memo to settings contact list view and edit screens
* Modify designs of edit and view contact in popup environment
* Update settings content list UX to show split columns in fullscreen and proper internal navigation
* Correct background address book API usages in UI
The `accounts` prop of `SignatureRequest` was throwing a PropType
warning because `accounts` was an object instead of an array. It looks
like when the `mergeProps` function was added in #6340, the ownProps
were accidentally set to override the state props.
The now ignored props have been removed from the parent `ConfirmTxScreen`
component as well. `conversionRate` was identical to the one retrieved
in `SignatureRequest`, and `selectedAddress` differed only in the
fallback behaviour when `state.metamask.selectedAddress` does not exist;
it will now default to the first account instead (as was the original
behavior, prior to #6340).
`seedWords` used to be stored on the metamask state temporarily at
certain points. This hasn't been the case since #5994, but references
to this state remained. All of the logic remained for correctly updating
these `seedWords`, handling them during navigation, and scrubbing them
from the state.
However the state was never updated in practice. The `seedWords` are
still returned by `verifySeedPhrase`, and they're still stored in
component state in a few places. But they aren't ever set in the Redux
metadata state or the Preferences controller.
All references to this state have been removed, along with any logic
for interacting with this state. A few unused actions were removed as
well.
The `AccountDropdownMini` component featured the ability to switch
accounts using a dropdown, but this functionality was disabled in #6024.
It has been acting as a restyled `AccountListItem` since then.
The component has been removed, and the style changes moved to the sole
parent component (`RequestSignature`).
The `time-remaining` component hasn't been used since #5704, aside from
a few styles. Those styles have been integrated into the
`advanced-tab-content` styles, and the unused component has been
deleted.
The CSS is now served as an external file instead of being injected.
This was done to improve performance. Ideally we would come to a middle
ground between this and the former behaviour by injecting only the CSS
that was required for the initial page load, then lazily loading the
rest. However that change would be more complex. The hope was that
making all CSS external would at least be a slight improvement.
Performance metrics were collected before and after this change to
determine whether this change actually helped. The metrics collected
were the timing events provided by Chrome DevTools:
* DOM Content Loaded (DCL) [1]
* Load (L) [2]
* First Paint (FP) [3]
* First Contentful Paint (FCP) [3]
* First Meaningful Paint (FMP) [3]
Here are the results (units in milliseconds):
Injected CSS:
| Run | DCL | L | FP | FCP | FMP |
| :--- | ---: | ---: | ---: | ---: | ---: |
| 1 | 1569.45 | 1570.97 | 1700.36 | 1700.36 | 1700.36 |
| 2 | 1517.37 | 1518.84 | 1630.98 | 1630.98 | 1630.98 |
| 3 | 1603.71 | 1605.31 | 1712.56 | 1712.56 | 1712.56 |
| 4 | 1522.15 | 1523.72 | 1629.3 | 1629.3 | 1629.3 |
| **Min** | 1517.37 | 1518.84 | 1629.3 | 1629.3 | 1629.3 |
| **Max** | 1603.71 | 1605.31 | 1712.56 | 1712.56 | 1712.56 |
| **Mean** | 1553.17 | 1554.71 | 1668.3 | 1668.3 | 1668.3 |
| **Std. dev.** | 33.41 | 33.43 | 38.16 | 38.16 | 38.16 |
External CSS:
| Run | DCL | L | FP | FCP | FMP |
| :--- | ---: | ---: | ---: | ---: | ---: |
| 1 | 1595.4 | 1598.91 | 284.97 | 1712.86 | 1712.86 |
| 2 | 1537.55 | 1538.99 | 199.38 | 1633.5 | 1633.5 |
| 3 | 1571.28 | 1572.74 | 268.65 | 1677.03 | 1677.03 |
| 4 | 1510.98 | 1512.33 | 206.72 | 1607.03 | 1607.03 |
| **Min** | 1510.98 | 1512.33 | 199.38 | 1607.03 | 1607.03 |
| **Max** | 1595.4 | 1598.91 | 284.97 | 1712.86 | 1712.86 |
| **Mean** | 1553.8025 | 1555.7425 | 239.93 | 1657.605 | 1657.605 |
| **Std. dev.** | 29.5375 | 30.0825 | 36.88 | 37.34 | 37.34 |
Unfortunately, using an external CSS file made no discernible improvement
to the overall page load time. DCM and L were practically identical, and
FCP and FMP were marginally better (well within error margins).
However, the first paint time was _dramatically_ improved. This change
seems worthwhile for the first paint time improvement alone. It also
allows us to delete some code and remove a dependency.
The old `css.js` module included two third-party CSS files as well, so
those have been imported into the main Sass file. This was easier than
bundling them in the gulpfile.
The resulting CSS bundle needs to be served from the root because we're
using a few `@include` rules that make this assumption. We could move
this under `/css/` if desired, but we'd need to update each of these
`@include` rules.
Relates to #6646
[1]: https://developer.mozilla.org/en-US/docs/Web/Events/DOMContentLoaded
[2]: https://developer.mozilla.org/en-US/docs/Web/Events/load
[3]: https://developers.google.com/web/fundamentals/performance/user-centric-performance-metrics
We had forgotten to add `eslint` as a dependency, even though we use it
directly. It had always worked because we have dependencies that also
depend upon it.
`eslint` has also been updated to v6, which necessitated two minor
changes.
Unused expressions are generally a mistake, as they don't do anything.
The exceptions to this rule (short-circuit expressions and ternary
expressions) have been allowed.
The `webrtc-adapter` was previously ignored by eslint because it has a
side-effect upon being imported. I removed the local variable instead,
which should preserve the same side-effect without making eslint
complain.
* Add React and Redux DevTools
* Conditionally load react-devtools
* Add start:dev npm script to run the app with devtools
Co-Authored-By: Mark Stacey <markjstacey@gmail.com>
* Add loading spinner to pending tx status label.
* Add border around account icon in top right
* Change style of settings toggle buttons; wrap with local components
* Eliminate large space after settings labels when no description
* Remove network form from advanced tab of settings
* Keep new account container height to contents when in full screen
This package is deprecated, and is incompatible with React v16. It has
been replaced by `react-test-renderer`, which has a drop-in replacement
for `react-addons-css-transition-group`.
Strangely, `react-test-renderer` was already listed as a dependency
despite not being used. I had to downgrade it, as the version already
listed was for React v16, and we're still using React v15.
While working on #6805, I noticed that many variables were being used
before they were declared. Technically this worked fine in practice
because we were using the `transform-es2015-block-scoping` Babel plugin,
which transforms `let` and `const` to `var`, which is hoisted. However,
after removing that Babel transformation, many things broke.
All instances of variables or classes being used before declared have
been fixed.
The `no-use-before-define` eslint rule has been added to catch these
cases going forward. The rule is disabled for function declarations for
the moment, because those are always hoisted. We could disable that too
if we want to, but it's purely stylistic and would require a lot more
changes.
* Remove unused state 'gas.basicPriceAndTimeEstimates'
* Check for invalid estimates from local storage
Gas estimates were being cached in local storage then later retrieved,
but the retrieved values were not being checked. If the data failed to
save, failed to load, or was cleared since being saved, it would result
in the gas estimates being set to undefined.
The estimates retrieved from local storage are now checked before they
are used. If they are falsy, the estimates are retrieved from the
network instead.
This should fix this Sentry issue:
[METAMASK-6W0T](https://sentry.io/share/issue/cfe470314a5741768b19050815322aa4/)
A few additional changes were made to the gas-duck tests to accommodate
the use of `sinon.restore`. `restore` is strongly recommended by the
`sinon` team, as neglecting to use it can result in memory leaks. It has
the additional benefit of ensuring you create fresh stubs/spies for each
test, which means they no longer need to be reset between tests.
* Introduce delay for eth_estimateGas calls with in test
* Add test that fails when gas estimates of contract method calls without gas are too high.
* Get transaction gas data from unApprovedTxs instead of confirmTransaction
* Fix selection of gas data in gas-modal-page-container.container
* Lint changes related to Version-6.7.2-gasLimitFix
* Fix e2e tests on Version-6.7.2-gasLimitFix
* Fix unit and integration tests for changes from Version-6.7.2-gasLimitFix
* more e2e fixes
* Add assertions for transaction values on confirm screen
* Fix display of transaction amount on confirm screen.
* Add tests for ImportWithSeedPhrase#parseSeedPhrase
* Handle importing whitespace-only seed phrases
Fixes#6694
This changeset fixes our parsing of seed phrases during import to handle the
case where a user tries to import a seed phrase that consists solely of whitespace.
We no longer produce an error and instead treat it as an incorrect seed phrase.
* Handle importing more invalid seed phrases
The back button on the import seed phrase page leaves the Redux store
with `appState.forgottenPassword` set to true, which prevents the user
from logging in. That flag is now unset when the user leaves the page.
Fixes#6740
Refactor the AccountDetailsModal to follow newer conventions. Changes
include:
- Create a directory for the component with separate files for the
component, the container, and the entrypoint.
- Use jsx rather than hyperscript
Fixes#6741
* Adds 4byte registry fallback to getMethodData() (#6435)
* Adds fetchWithCache to guard against unnecessary API calls
* Add custom fetch wrapper with abort on timeout
* Use opts and cacheRefreshTime in fetch-with-cache util
* Use custom fetch wrapper with timeout for fetch-with-cache
* Improve contract method data fetching (#6623)
* Remove async call from getTransactionActionKey()
* Stop blocking confirm screen rendering on method data loading, and base screen route on transactionCategory
* Remove use of withMethodData, fix use of knownMethodData, in relation to transaction-list-item.component
* Load data contract method data progressively, making it non-blocking; requires simplifying conf-tx-base lifecycle logic.
* Allow editing of gas price while loading on the confirm screen.
* Fix transactionAction component and its unit tests.
* Fix confirm transaction components for cases of route transitions within metamask.
* Only call toString on id if truthy in getNavigateTxData()
* Fix knownMethodData retrieval and data fetching from fourbyte
* Changed max button to checkbox, disabled input if max mode is on, recalculate price according to gas fee if max mode is on
* Disabled insufficient funds message in the modal if max mode is on, displays proper amounts in modal when max mode is on, sets the send amount according to custom gas price after gas modal save, resets the send amount after resetting custom gas price
* Disabled max mode checkbox if gas buttons are loading, refactored gas-modal-page-container
* Implemented new max button & max mode message. Moved insufficient funds error to underneath the send amount field
* Fixed existing integration test to pass, created new tests to ensure send amount field is disabled when max button is clicked and the amount changes when the gas price is changed. Refactored some components
* Add networks tab to settings, with header.
* Adds network list to settings network tab.
* Adds form to settings networks tab and connects it to network list.
* Network tab: form adding and editing working
* Settings network form properly handles input errors
* Add translations for settings network form
* Clean up styles of settings network tab.
* Add popup-view styles and behaviour to settings network tab.
* Fix save button on settings network form
* Adds 'Add Network' button and addMode to settings networks tab
* Lint fix for settings networks tab addition
* Fix navigation in settings networks tab.
* Editing an rpcurl in networks tab does not create new network, just changes rpc of old
* Fix layout of settings tabs other than network
* Networks dropdown 'Custom Rpc' item links to networks tab in settings.
* Update settings sidebar networks subheader.
* Make networks tab buttons width consistent with input widths in extension view.
* Fix settings screen subheader height in popup view
* Fix height of add networks button in popup view
* Add optional label to chainId and symbol form labels in networks setting tab
* Style fixes for networks tab headers
* Add ability to customize block explorer used by custom rpc
* Stylistic improvements+fixes to custom rpc form.
* Hide cancel button.
* Highlight and show network form of provider by default.
* Standardize network subheader name to 'Networks'
* Update e2e tests for new settings network form
* Update unit tests for new rpcPrefs prop
* Extract blockexplorer url construction into method.
* Fix broken styles on non-network tabs in popup mode
* Fix block explorer url links for cases when provider in state has not been updated.
* Fix vertical spacing of network form
* Don't allow click of save button on network form if nothing has changed
* Ensure add network button is shown in popup view
* Lint fix for networks tab
* Fix block explorer url preference setting.
* Fix e2e tests for custom blockexplorer in account details modal changes.
* Update integration test states to include frequentRpcList property
* Fix some capitalizations in en/messages.json
* Remove some console.logs added during custom rpc form work
* Fix external account link text and url for modal and dropdown.
* Documentation, url validation, proptype required additions and lint fixes on network tab and form.
* eslint: Check for unused function arguments
* eslint: Ignore unused '_' in argument list
Also allow any number of '_' e.g., '__' or '___' which is to be used sparingly
* Remove and rename unused arguments
* Add i18n strings
* Finish Auto timeout
* Fix linter
* Fix copies
* Add unit test to Advanced Tab component
* Add back actions and container
* Add basic test to ensure container completeness
* No zero, fix linters
* restrict negative in input
* Add basic drag and drop functionality
* Refactor seed phrase data structure
* Insert to list when drop
* Save before refactor
* Finish DND
* Fix linter
* update package-lock.json
* Address styling feedbacks
* Add box shadow on hover
* Finish adding unit tests
* Remove describe.only
* Ensure home screen does not render if there are unapproved txs (#6501)
* Ensure that the confirm screen renders before the home screen if there are unapproved txs.
* Only render confirm screen before home screen on mount.
* inpage - revert _metamask api to isEnabled isApproved isUnlocked
* Send metrics event from backend for on chain transaction failures
* Passes state object to backEndMetaMetricsEvent, and adds getMetaMetricState selector
* Move send to pages/
* Fix unit tests
* Finish UI
* Integrate asset dropdown to send actions
* Remove console.log
* Hide asset change during edit
* Enable switch from send token to seand eth
* Enable switching from token to eth when editing
* Fix linter
* Fixing test
* Fix unit tests
* Fix linter
* Fix react warning; remove console.log
* fix flat test
* Add metrics
* Address code review comments
* Consistent spacing between send screen form rows.
* Reduce height of gas buttons on send screen.
* Make send screen gas button height dependent on size of contents.
* Get contract method data from 4byte if we can't get it from eth-method-registry
* Clarify token method name fallback code in getMethodData
* Bugfix: don't attempt to translate falsy actionKeys in confirm-transaction-base.component.js
* Rewrite getMethodFrom4Byte with async-await
* Call four byte and method-registry requests in parallel in getMethodData()
The use of `Object.entries` here to map the accounts into a new array effectively
produces a shallow clone of the array without guaranteeing the order of the original
array (as object iteration order is implementation-specific and variable). From MDN [1]:
> The **`Object.entries()`** method returns an array of a given object's own enumerable
> string-keyed property `[key, value]` pairs, in the same order as that provided by a
> `for...in` loop
And also:
> The ordering of the properties is the same as that given by looping over the
> property values of the object manually.
Both of which suggest that the iteration order is the same as `for...in`, which is to
say that it's not specified. [2] [3]
This changeset removes the cloning, keeping the shallow clone created the line before
which preserves the order of the items in the array.
[1]:https://developer.mozilla.org/en-US/docs/Web/JavaScript/Reference/Global_Objects/Object/entries
[2]:https://stackoverflow.com/a/5525820/1267663
[3]:https://stackoverflow.com/a/30919039/1267663
* getMethodData() default to abi decoded method if registry lookup errors
* Update e2e tests to work with getMethodData() fallback changes
* Remove indeterminency in gas input key entering in send token e2e test.
* Check balance before showing cancel
* Fix linter
* Use existing helper methods for calculating increased cancel price
* Add tooltip for disabled button
* Lint fix for cancelError branch.
* Disabling of cancel button should account for value of tx.
* Improve opt-in opt-out event tracking after going 'back' in onboarding.
* Fix 'Switched Networks' metrics event.
* Fix custom variables ids (can only use ids 1-5)
* Fix tracking of function type custom variable for metametrics in confirm-transaction-base
* Add missing metametrics events
* Add metametrics provider and util.
* Add backend api and state for participating in metametrics.
* Add frontend action for participating in metametrics.
* Add metametrics opt-in screen.
* Add metametrics events to first time flow.
* Add metametrics events for route changes
* Add metametrics events for send and confirm screens
* Add metametrics events to dropdowns, transactions, log in and out, settings, sig requests and main screen
* Ensures each log in is measured as a new visit by metametrics.
* Ensure metametrics is called with an empty string for dimensions params if specified
* Adds opt in metametrics modal after unlock for existing users
* Adds settings page toggle for opting in and out of MetaMetrics
* Switch metametrics dimensions to page level scope
* Lint, test and translation fixes for metametrics.
* Update design for metametrics opt-in screen
* Complete responsive styling of metametrics-opt-in modal
* Use new chart image on metrics opt in screens
* Incorporate the metametrics opt-in screen into the new onboarding flow
* Update e2e tests to accomodate metametrics changes
* Mock out metametrics network requests in integration tests
* Fix tx-list integration test to support metametrics provider.
* Send number of tokens and accounts data with every metametrics event.
* Update metametrics event descriptor schema and add new events.
* Fix import tos bug and send gas button bug due to metametrics changes.
* Various small fixes on the metametrics branch.
* Add origin custom variable type to metametrics.util
* Fix names of onboarding complete actions (metametrics).
* Fix names of Metrics Options actions (metametrics).
* Clean up code related to metametrics.
* Fix bad merge conflict resolution and improve promise handling in sendMetaMetrics event and confrim tx base
* Don't send a second metrics event if user has gone back during first time flow.
* Collect metametrics on going back from onboarding create/import.
* Add missing custom variable constants for metametrics
* Fix metametrics provider
* Make height of opt-in modal responsive.
* Adjust text content for opt-in modal.
* Update metametrics event names and clean up code in opt-in-modal
* Put phishing warning step next to last in onboarding flow
* Link terms of service on create and import screens of first time flow
* Add subtext to options on the onboarding select action screen.
* Fix styling of bullet points on end of onboarding screen.
* Combine phishing warning and congratulations screens.
* Fix placement of users if unlocking after an incomplete onboarding import flow.
* Fix capitalization in opt-in screen
* Fix last onboarding screen translations
* Add link to 'Learn More' on the last screen of onboarding
* Code clean up: metametrics branch
* Update e2e tests for phishing warning step removal
* e2e tests passing on metametrics branch
* Different tracking urls for metametrics on development and prod
* Action select step of onboarding flow added.
* Update navigation on create and import password screens.
* Adds terms of service checkbox to create and import account screens.
* Add security warning to jazzicon intro step
* Update and streamline unique image to confirm seed steps of first time flow.
* UI touch ups to welcome screen.
* UI touch up on select action page
* Fix first time import flow.
* Add end of flow screen to first time flow
* Replace unique image screen with updated fishing warning screen.
* Update e2e tests for onboarding flow changes.
* Add required translations to onboarding flow.
* Update design of select action screen to emphasize create new wallet option.
* Clean up onboarding flow code.
* Remove notice related code from first-time-flow directory.
* Use updater function argument in new-account.component
* Extract advanced gas input controls to their own component
* Add advanced inline gas toggle to settings
* Add optional advanced inline gas to send send screen
* Adds optional advanced gas inputs to the confirm screen
* Add info modals for advanced gas inputs.
* Fix translation of advance gas toggle description.
* Lint and unit test fixes for inline-advanced-gas-inputs
* Increase margin above advanced options button on send screen
* Move methods from constructor to property syntax in advanced-gas-inputs.component
* mm-controller - dont overwrite existing rpc settings
* ui-networkDropdown - dont pass old network as chainId
* add methods preferencesController.updateRpc and metamaskController.updateAndSetCustomRpc
* use updateAndSetCustomRpc in settings to allow rpcs to be updated
* use new rpc as nickname if no nick name has been supplied
* fix update rpc method
* Refactor and fix styling for first time flow. Remove seed phrase from persisted metamask state
* Fix linting and tests
* Fix translations, initialization notice routing
* Fix drizzle tests
* Fix e2e tests
* Fix integration tests
* Fix styling
* Fix migration naming from 030 to 031
* Open extension in browser when user has not completed onboarding
* Show user warning if they set gas price below safelow minimum, error if 0.
* Properly cache basic price estimate data.
* Default retry price to recommended price if original price was 0x0
* Use mock fetch in send-new-ui integration tests.
* Use selector for state.metamask.accounts in all cases.
* Default to cached balance when selecting metamask accounts
* Adds the cached-balances controller
* Documentation and small codes fixes for #5843
Co-Authored-By: danjm <danjm.com@gmail.com>
* Fix rounding issue when sending max tokens
* Ensure amount row shows exact amount of max tokens on send screen (#2)
* Fix tests
* Change stored redux value from BigNumber to hex string. Fix TokenInput default value
* Parameterize NetworkDisplay background colour
* Update design for login request screen
* Pass siteTitle, siteImage through for calls to ethereum.enable()
* Bring the site images closer together
* added drizzle app for testing
* working
* clean up
* clean up script
* make build step required
* add drizzle-tests to .eslintignore
* clean up drizzle run script
* lint
* use truffle unbox
* undo eslintignore changes
* revert change
* dont use global
* dont need this steps
* use the new account flow
* restore package-lock.json
Refs #4417
This change is functional copy of 3893469 that solves the problem in a way
that doesn't depend on the height of the app bar since the app bar isn't a
fixed height in the smaller views.
This changeset displays the error messages attached to txMeta for a failed tx
in a tooltip on hover in the tx list view. This will only display for txs with
the `txMeta.err.rpc.value` property, not all failed txs.
