* feat: add the consensys zkEVM as a default network
* fix: change infuraNetworkStatus in navigate-txs file
* fix: remove account tracker for zkEVM + remove zkEVM from infura list
* fix: change consensys zkevm name to linea + change rpc url for linea network
* fix: rebase conflicts
* feat: add new colors for linea goerli network
* feat: add new function inside network dropdown to render non infura networks
* feat: add feature toggle for linea network
* fix: add new unit test
---------
Co-authored-by: Dan J Miller <danjm.com@gmail.com>
The `HardwareKeyringTypes` constant has been renamed to `KeyringTypes`
and moved to a separate constants module, to reflect that it contains
more than just hardware wallet keyring types. This corrects a mistake
made recently during a TypeScript conversion.
When the network client tests in this repo were copied over to the core
repo, some alterations were made. This commit copies them back to this
repo so that the two test suites are easier to compare to each other.
Changes include:
* Extracting `testsFor*` functions (functions that bundle similar tests
together) into separate files
* Reordering the tests defined in
`testsForRpcMethodsThatCheckForBlockHashInResponse`
* Reordering the set of RPC methods listed in `shared-tests.js`
* Reordering the type definitions defined in `shared-tests.js` to be
closer to the functions that use them
* Updating the tests defined in `testsForRpcMethodSupportingBlockParam`
so that when they make requests they pass params, even if it's just an
empty array
* Revert "Moved subscribe and filter into network controller (#16693)"
This reverts commit 6f6984fa58. That
commit was an RPC middleware refactor intended to move the subscribe
and filter middleware into the network controller, to simplify the
process of sharing this middleware between clients.
This refactor resulted in `eth_subscribe` notifications being sent on
the wrong connections, causing the UI to break in some cases (the UI
`provider` connection does not support notifications). This happened
because the `setupProviderEngine` function runs per-connection,
whereas the engine setup inside the network controller is global. The
global network client cannot support notifications because it has no
way to route them; they'll need to stay in the per-connection provider
engine.
Closes#17467
* Add e2e test
An e2e test has been added that confirms subscriptions are only
broadcast to the site that registered them. This test fails on
`develop`.
* NFTs: Remove feature flag for release
* Update security tab jest test
* Fix broken test
* Update snapshot
* Update test
* Fix test
* Remove last usages of flag
* Update CI jobs
* Fix jest tests
* Use tokenList to get token details, when available, in getTokenStandardAndDetails
Previously, every call to getTokenStandardAndDetails would fetch data via the provider.
This would result in at least 3 network requests whenever that method is called for an
ERC20 token, contributing to unneccesary loading and lagging in multiple places.
This commit takes advantage of stored data we already have available to avoid the unnecessary
loading.
* Lint fix
* Fix build-quote test
* bump coverage targets
* Pass provider to token-util, for use in ethers Contract module
* Check all possible sources of ERC20 token data before async call to assetsContractController
* Add and update tests
* Update app/scripts/metamask-controller.js
Co-authored-by: Alex Donesky <adonesky@gmail.com>
* Update app/scripts/metamask-controller.js
Co-authored-by: Alex Donesky <adonesky@gmail.com>
* Remove unnecessary this.ethQuery changes
* Use metamask-eth-abis instead of human-standard-token-abi in token-util.ts
* Add explanatory comments to getTokenStandardAndDetails
* lint fix
* Cleanup
* fix test
* Update app/scripts/metamask-controller.js
Co-authored-by: Alex Donesky <adonesky@gmail.com>
* update error message
---------
Co-authored-by: Alex Donesky <adonesky@gmail.com>
* feat: disable deposit popover and replace it with global redirect to onramp on pdapp
* feat: remove legacy code for hardcoded onramp providers
* fix: remove unused visuals and components related to legacy code of deposit popover
* fix: remove unused messages
* feat: use a custom hook for all onramps related methods and variables
* fix: modify the custom hook implementation to include test networks
* fix: remove deprecated file buy-url
* fix: remove references for deleted deposit logos
* fix: network-controller failing unit test
* fix: snapshot loading-swaps-quotes-stories-metadata.test.js.snap
* fix: storybook tests
* fix: remove unused constatns related to buyable onramp chains
* fix: remove unused variables and fix eslint
* adding unit test for useRamps custom hook
* feat: add comment on the proper usage of useRamps within confirm-page-container component
* fix: add unit tests for buy button in token-overview page
* fix: add unit test for open the buy crypto URL for a buyable chain ID in token page
* feat: add unit test coverage for eth-overview page
* fix: update locales
The migration template has been converted to TypeScript. We can start
writing migrations in TypeScript today; they have no dependencies on
JavaScript modules.
This release only includes one breaking change, which is the renaming
of the package to be under the `@metamask` scope. It includes
improvements to the types that will unblock migrating our network
clients to TypeScript.
The PhishingController has been updated to v2. This release should
dramatically reduce network traffic and double the update speed of the
phishing list.
This was accomplished by combining both of our phishing configurations
into one list (the "stalelist"), then creating a separate list of the
changes just the past few days (the "hotlist"). Now users will download
a smaller list more frequently (every 30 minutes rather than every
hour), whereas the full list is only updated every 4 days.
The combined configuration means that we no longer know which list was
responsible for each block. The phishing warning page has been updated
to dynamically look this information up, to ensure users are still
directed to the correct place to dispute a block. This update to the
phishing warning page also includes the recent redesign.
* feat: add desktop enable button component
This component will be added
to the experimental page. Users
will then be able to initialize
a desktop connection
* feat: add desktop pairing page
* feat: add desktop deep-linking shared lib
* test: add initial entries to render helper
Allow specifying initialEntries for
MemoryRouter. This change will allow
testing pages that use the useParam
hook.
* feat: add desktop error page
Error page for any desktop pairing
related issue
* feat: add desktop routes to route component
* feat: add enable desktop button to experimental tab
* feat: add desktop icon when paired in dev mode
* feat: disable ledger live control when desktop enabled
* feat: register desktop error actions on ui init
* fix: add missing code fencing
* chore: remove enable desktop rpc middleware
Now that we are adding the UI
there's no need for this rpc middleware
(as it was used to test desktop background
code)
* fix: display experimental tab for desktop
The network controller has a variety of methods that just retrieve
controller state. These methods are not necessary because controller
state is already part of the public API of the controller and can be
accessed directly.
These methods are:
- getCurrentChainId
- getCurrentRpcUrl
- getNetworkIdentifier
- getNetworkState
- getProviderConfig
- isNetworkLoading
This is part of a larger effort to normalize the API of both network
controllers, to make them easier to merge.
Use DesktopManager in background script to redirect internal and external connections to the desktop app.
Include DesktopController in the MetaMask controller.
Support desktop keyrings in MetaMask controller via the overrides object.
Create middleware handler to connect to the desktop app while UI code is pending.
Add build system support for desktop specific configuration variables.
The network controller has some tests, but they are incomplete and don't
follow our latest best practices for writing unit tests.
This commit greatly increases the amount of test coverage for the API
that we want to retain in NetworkController, in particular the seemingly
myriad paths that the code takes starting from `initializeProvider`,
`resetConnection`, `setRpcTarget`, `setProviderType`,
`rollbackToPreviousProvider`, and `lookupNetwork`.
There were a couple of pieces of logic I noted which don't seem to have
any effect due to being redundant or unreachable, but they also don't
make our lives more difficult, either, so I opted to leave them in.
Co-authored-by: Mark Stacey <markjstacey@gmail.com>
Co-authored-by: Zachary Belford <belfordz66@gmail.com>
* detect and track ui customizations on personal sign requests
* add feature flag check to metrics
* clean up comments
* get data only if it exists
* updated with PR feedback
* moved constants
* lint
* Apply suggestions from code review
Co-authored-by: Ariella Vu <20778143+digiwand@users.noreply.github.com>
---------
Co-authored-by: Ariella Vu <20778143+digiwand@users.noreply.github.com>
This package has been updated to reduce the bundle size (we already use
the v4 version indirectly). The only breaking change applicable to the
usage of this package in the extension is to the package's exports. The
one import line has been updated accordingly.
This update comes with types (v3 was the TypeScript migration).
* Added translation for eth sign toggle
* Disabled the ability to call eth_sign by default. Added ability within advanced settings to renable support for eth_sign
* Add test case for eth_sign being enabled and disabled
* Modified copy
* Moved rpc method preference to its own object within store
* Complete work on moving rpc method preference into its own object within store
* Fix with prettier
* Fix lint
* Fix a unit test
* Fix test
* Renamed function and object keys to be more intuitive
* Fix e2e test
* Enabled eth_sign through preferences fixture
* Fix lint
* Fix e2e test
Wait for the notification popup to close, leaving 2 window handles the extension and the test dapp
* Fix e2e test
* Fix unit test
Enable eth_sign method
* Lint fix
---------
Co-authored-by: PeterYinusa <peter.yinusa@consensys.net>
Co-authored-by: Dan J Miller <danjm.com@gmail.com>
